Counting matching models…
Box pro 3 HDD ORICO 2577U3-BK-BP Externí box pro 2,5" disky, max. kapacita 2 TB, USB 3.0, USB-B a Micro USB B 3.2 Gen 1
Print approx. €6.60–€8.06 excl. taxPreliminary estimate for PETGSource material: PET
Reuploaded LocoRico flexible brio compatible train track from Thingiverse, original URL is https://www.thingiverse.com/thing:5019335 . Check that URL for licensing requirements (currently, but this might not be accurate when you're…
…Please be sure to hit like & post a make, I'd love to see your prints! Turn your Rasberry Pi equipped printer into a solid state machine! These drives are faster & more reliable than any SD card which have a very limited times they can…
The mount is designed to hold the ORICO USB HUB 3.0 with 7 ports and a USB-C power input. Vendor S/N: ORICO-PW7U-U3-10-BK-EP-EU ASIN: SIN B0BXSSHRDJ onto a extrusion of sim racing rig (SimLab P1-X). It will be compatible with other sim…
I didn't want my external hard drive case to lay on the desk or my computer tower. I designed a vertical stand with wings out the side to stabilize it and prevent it from tipping over. It prints quick, looks clean, works perfectly. Print…
Replacement lock if you lost yours :^) Printed in PETG with tree supports for the overhangs
Need to find a place to mount your UHF radio? Why not replace the unused and ugly ash tray down the bottom of your center console. This model attaches to the Oricom UHF310 Micro 5 watt radio, and has angled cleats to attach to a printed “…
Remix of "LocoRico flexible rail brio compatible" but a little bit shorter (210 mm) to fit smaller printers vertically or horizontally. All credits to original created by LocoRico. LocoRico also has (as of this writing) an Etsy store at…
This is a case for SATA SSD to USB-C adapter from Orico. It's an OK adapter but the enclosure is flimsy and too big for small SSD because it's made for 2.5" HDD. I bought this adapter from Ali for $10. Assembled with 2 M3x6 screws. Print…
Holder for your SSD or HDD in Orico case which can be attached to notebook display while traveling.
I did not want my hub to move around and did not really have space on my desk. The usb hub: https://www.aliexpress.com/item/1005003263638475.html I mounted with 3 screws. Unplugging stuff is not the easiest with small dongles, but it works.
Hier ist der link für das Orico Case, falls der nichtmehr geht ist auch ein Bild dabei, gibts bei Aliexpress oder sonstwo.…
A simple two piece wall mount for the Orico FL01-BK-BP USB hub. One side goes over the cable and one over a USB port. Accommodates 4 6mm wide countersunk screws
holder for orico tcm2f-c3 ssd m2 hole for M3
Orico 4 Port USB holder wall mount with space for two poster command strips (trim around mount for best fit) or two screws 40 mm apart. Can hold the hub either horizontal or vertical inserted with the cable in either direction. No…
Caja para refrigerar carcasa Orico para SSD NVmE.
Tray for the 1U Modular Rasperry Pi Rack Mount to put in a USB M.2 SSD Adapter.
BOM: 120mm Fan (up to 25mm height) 4x screws M3x30mm for 120x25mm fan M3x20mm for 120x15mm fan (low-profile/slim) 4x Heat set insert M3x5x4 (3mm ID, 5mm OD, 4mm Length) 4x 6mm magnets (optional, model has a slight friction fit) You can…
A remix model ORICO Powerstrip hollder for Ikea Skadis
I print with no support in TPU
Držák pro Orico nabíječku 60x28mm Tisk 2x s členitým povrchem (Fuzzy skin) pro lepší vzhled. Translated by Google: Holder for Orico charger 60x28mm Print 2x with a rugged surface (Fuzzy skin) for a better look. Print Settings Printer…
40% infill, use M3 screws to fix the camera
Dual-Bay casing available: https://www.printables.com/model/1190688-dual-bay-orico-m2-ssd-enclosure Assembling Instructions Prepare a micro switch with lever: Put slider and slider cover in place, glue the cover in place with super-glue:…
Tiskl jsem na výšku z ASA. Na V0.2. Slicoval jsem v Orce. Zapoměl jsem si zapnout podpory, přesto se tisk povedl, i když by asi neměl ;) Výška vrsvy 0,2mm, tryska 0,4mm, perimetry 3. Zvažte přídání perimetrů, nebo zapnutí podpor.
Camera - Oricom - OBH930PTZ Cot - Mocka Aspen Classic
This is a replacement for the original clamp mechanism, that won't fit on an IKEA Kallax, since the original opening is not wide enough. Just unscrew the electronic part with its backplate and attach it to this part with it's original…
Made for this SSD Enclosure https://www.orico.cc/usmobile/product/detail/id/8038 Any flexible material should work. Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 100 Filament: TPU clear Category: Computer
Jednoduchý dok na rozbočovače z PLA - 33x100,6 mm
A wall mount for an Orico HDD case. Uses 2 screws/piece. The gap to fit things is about 23cm. It can be used as a generic holder. Made with Onshape, you can adjust it to your needs:…
This is a LabStack Raspberry PI module with a slot for external Orico branded M.2 ssd enclosure. There's two rotating hands keeping the ssd from falling off from the slot when moving things around, it has a quite a bit of tolerance so…
This is my simple model a.k.a holder/ mount for Orico 5-port smart desktop charger. Printed - 0,3 mm layer height. Screw hole - diameter 4 mm.
Not the most versatile. I made this to hold the Orico drive cases on the side of a ledge on my desk. Holds two 2.5" SSD cases. One is the USB-C, and the other is the micro USB one but should work with two USB-C cases. Also holds one USB-C…
Designed to hold 2 ORICO M.2 SSD enclosure quick release mod: https://www.printables.com/model/1185251-orico-m2-ssd-enclosure-quick-release-mod
Holder for ORICO 2.5" HDD/SSD rubber box. I designed this to mount the box under my desk so the drive is always close at hand. Simply stick the holder in place using double-sided tape and slide the disk in. The design features a…
Case Orico charger 6 port QSL-6U (YC-PE05010000H)
My Orico A20Plus drive came detached internally. I was unable to plug the USB-C cable into it and needed to get the files off of it, so….I attempted to get it apart. I thought that the housing just snapped together so I attempted to pry…
I designed this solution to fit secure my USB hub to the bottom of my monitor stand in a way that allows the hub to be removed if needed. I found that my velcro solution was too flimsy. I have included the hub information in case there…
Simple mount for GMKTec G3 mini pc to rest on top of a Orico 5 Bay enclosure without sliding from side to side. Slots into the G3's slot mount holes and just rests on top of the Orico. Doesn't prevent forward/back movement, just…
brackets to mount a Oricom UHF305 in place for your ashtray in your Toyota Hilux/Surf/4runner Gen2 1989-1995 for a slim tucked away placement and easy access 2x M2 bolts and respective washers required
A holder to hold the Orico M.2 Enclosure in the gridfinity system.
A custom stackable tray designed to convert an Orico 3.5" Hard Drive Protection Box into a multi-drive storage solution. It holds two 2.5" SSDs or HDDs per level side-by-side, allowing you to stack multiple layers inside a single…
Orico 4 Port USB holder wall mount with space for two poster command strips (trim around mount for best fit) or two screws 40 mm apart. Can hold the hub either horizontal or vertical inserted with the cable in either direction. No…
A holder to hold the Orico M.2 Enclosure in the gridfinity system.
This caddy is designed to hold four 3.5" hard drives stored in ORICO hard drive cases , keeping them upright, organized, and easy to access. It’s a straightforward storage solution for desks, shelves, or workbenches where loose drive…
Short story: I bought a dock, the fan's noise annoyed my waifu so I spent a lot of time designing a whole upgraded bottom piece for the dock to enable upgrading to a much bigger and quieter fan. Should be easy to print and with the…
UHF Holder can be mounted vertically or horizontally and has a click sound when locked in Compatible with the Oricom UHF390 5 WATT 80 Channel UHF Radio+CH5T not sure about other models
