Counting matching models…
⭐ Hit Like and stash it in your collection – your future self will thank you! ❤ A collection of Torx screws according to ISO 724 , ranging in sizes from M2 to M20, each available in lengths of 5 mm, 10 mm, 15 mm, 16 mm, 20 mm, 25 mm, 30…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
⭐ Hit Like and stash it in your collection – your future self will thank you! ❤ A collection of Headless Torx screws according to ISO 724 , ranging in sizes from M3 to M16, each available in lengths of 5 mm, 10 mm, 15 mm, 16 mm, 20 mm, 25…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant
!!! The use of the parts is on your own risk, no liability for injury or damage. !!! Custom knife plate for Worx Landroid M500 (WR165E, model 2020) with 5 blades. Can be used on all cut height settings. After printing of the plate part,…
Print approx. €0.90–€1.10 excl. taxPreliminary estimate for PETGSource material: PET
I needed a larger compartment to hold my Wera hex and torx, so I made a remix, so I could adapt it to my Fasano tool trolley. Plus it fits perfectly in my Fasano tool cart. I printed them with my bambulab p1s. The folder also contains the…
Print approx. €14.40–€17.59 excl. taxPreliminary estimate for one variant
Print with holes vertical, PETG, .2mm layer height, any % infill (will be 100% anyway). The small key hole might be a little tight, just insert and twist it a little to loosen it up.
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for PETGSource material: PET
Here's a very large plate (35.6 cm x 35.6 cm / 14 "x14") that will add a touch of humor to your chicken coop. It's well known that birds are the last living dinosaurs. Unlike many 3D logos, this one is actually 2D, as the plate is 10 mm…
Print approx. €27.79–€33.97 excl. taxPreliminary estimate for PETGSource material: PET
Gridfinity bin socket torx key holder Supports torx keys size TX45, TX40, TX30, TX25 and TX20 The torx key including socket is 126mm (4 15/16") long and the socket ⌀ is ~17.5mm (11/16"). Used with 3/8" drive ratchet. The socket holder…
Print approx. €5.31–€6.49 excl. taxPreliminary estimate for one variant
Just a quick redraw inspired by the design of the Worx magnet barrier for Landroid Automowers Printed in PETG, laying on the side with bed supports for more strength in direction of force (holding down the magnet band) 20% Infill, 0.3mm…
Print approx. €1.84–€2.25 excl. taxPreliminary estimate for PETGSource material: PET
This is a simple set that allows you to fasten anything to the Worx table using the integrated sliding track. The plate goes into the track, and a 1/4"-20 countersunk screw can be used as the anchor. 2" screws should be good enough for…
Print approx. €3.22–€3.93 excl. taxPreliminary estimate for one variant
Had to install a few Hik Vision cams… found out in short order… the L driver is rubbish… so we came up with a solution. cut the L short and epoxy it into the 3d printed handle. Much easier to utilize :D :D :D Enjoy!
Print approx. €1.00–€1.22 excl. taxPreliminary estimate for one variant
Batteries that are known to fit: US models WA3525, WA3575 and WA3669. I printed several other holders, and even the ones that said they were for US models would not hold my 20V Worx PowerShare batteries. Some were way too tight. Some…
Print approx. €3.28–€4.01 excl. taxPreliminary estimate for one variant
Worx Battery Holde - One Battery. Easy to install, greater dimensional tolerances, beveled lead. Less filament.
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for one variant
Allenkey (1.5mm to 10mm) and torxkey (T10 to T50) holder attachement for the HSW. I used galaxy black PLA. Because I wanted a nice print I used some organic support for the brandname “Stier” and 0,2mm only for the first layer. All others…
Print approx. €4.20–€5.13 excl. taxPreliminary estimate for one variant
Remixed version of the holder for IKEA Skadis System - this one is for mounting to wall (or any other flat structure) using screws.
Print approx. €0.89–€1.09 excl. taxPreliminary estimate for one variant
The screwdriver holder is made of 3 parts, 2 wall mounts and the holder itself. the wall mounts can be slid into the holder, these are made so they can be printed laying down, improving the strength of the part so the holder wont wall of…
Print approx. €2.32–€2.84 excl. taxPreliminary estimate for PETGSource material: PET
Wall Holder for Cordless Screwdriver Set In 4 different Variants. With logo for WORX, KS-Tools and Kiprim as Well, without LOGO. Happy Printing… Set on Picture: KS-Tools 515.3699 Printed on: Original MK3S+ Filament: NOYES PLA Grey
Print approx. €14.45–€17.66 excl. taxPreliminary estimate for one variant
Keine speziellen Drucktips – siehe G-Code.
Print approx. €13.21–€16.14 excl. taxPreliminary estimate for one variant
Open in Fusion 360 and you will find parameters under the modification menu. See screenshot. You can change the diameter, the thickness of the disc, the number of blades, etc. I used CNC-Kitchen short m4 thread insert. Don't forget to…
Added 10/11/2025 V3 rim center w/o connector parts (Schraubverbinder) (Felgenschüssel ohne Schraubverbinder) and suitable tire with M3 metric threads. Printing the threads in tpu might fail but then you can just screw them in. Threads for…
⭐ Hit Like and stash it in your collection – your future self will thank you! ❤ A collection of Torx screws with Ribbed Socket head according to ISO 724 , ranging in sizes from M2 to M20, each available in lengths of 5 mm, 10 mm, 15 mm,…
Handy UV and elements cover for your landroid mowing robot. May be easily adapted to different mowers. This is update Mk2. I made it 2cm higher after observing a couple of collisions. Option with ridiculous Cyberpunk vibe provided as…
This spoiler is a remix, made from a RC Car Spoiler that i found on thingiverse. The spoiler is put together using super glue I used dobbeltsidet tape to mount it on the Landroid. Recommend to print in ABS or ASA Let me see them makes and…
The wheels are for WORX Landroid PLUS WR148E. Diameter 220mm. The Weigths from the old wheels can be used (have to be used) Improves spinnig wheel problem. I print the Cover and Hubs in ASA (can be printet also in PETG or PLA) The Tire is…
I would say it fits good, but strong! used 0.15 quality profile See also: Box for Torx caps https://www.printables.com/model/1267867-box-for-torx-caps
YOUTUBE video showing the use of this 3d scanning frame: Improved LARGE version of my scanning frame v2 which is working great using RaptorX in parallel laser scanning mode. Motivation for designing this 3d scanning frame: Object can be…
Print in PETG and keep the walls plentyfull. Enjoy and happy printing
Hi i designed a Wheel for my Worx Landroid (Worx Landroid M-500) because we have a uneven garden so Ive designed a wheel to fix issues when my wheel gets stuck, and it not get over our stones try it yourself and Test it! I Hope it can fix…
My take on studded wheels for the Worx Landroid robotic mower. It's heavily inspired by https://www.thingiverse.com/thing:3750909 , but I designed it from scratch in OpenSCAD. It's been tested on an S500i and an M700. So far, it works…
For standard inbus metric size set 1.5, 2, 2.5, 3, 4, 5, 6. NEW: Added tighter fit INBUS and new TORX version. Printing information I aimed for tighter key fit, worked for me with 0.4mm nozzle and 0.15-0.2mm layerheight. Added secondary…
Can be mounted to a surface with two screws. Known to work with: WA3550 WA3551 WA3551.1 Edit: Battery Holder V2.stl, modified geometry for a better fit
Using some 24.5x6.3 connectors (https://www.aliexpress.com/item/1005002117264924.html) to connect to the battery terminals. Make sure to secure the connectors in the adapter before use.
Spool cap for Worx string trimmers. Should be compatible with various Worx string trimmer models (WG150, WG151, WG152, WG153, WG154, WG155, WG156, WG157, WG160, WG163, WG165, WG175, WG180, etc.) Suggested to print in ABS or ASA Fusion 360…
Ich habe hier eine Wandhalterung für WORX Akkus von ein bis vier Akkus erstellt. Der maximale Schraubenkopfdurchmesser beträgt ca. 6.7mm. ----------------------------------------------------------------------------------------------------…
What for would I need a 3D printed T30 Torx bit? You may have found my set of 3D printing optimized set of screws and nut already. This contains a set of Torx head screws as well. https://www.printables.com/model/1124580 But I don't have…
Cutting disc with 6 blades compatible with WR167E - Landroid M700 Plus This is the new version of Landroid with the Hex adapter below the cutting disk. Diameter and total height are the same of the stock cutting disk. Just use M4 standard…
Heckflügel für Worx Landroid
If you have a Worx Landroid that has traction problems specially with tall grass or slopes, adding weight to it, particular weight behind the rear axis, will improve its traction significantly. I'm not the first to come with this solution…
Although there are several models available on another site… I found them all to be unnecessarily too big and complex. Taking inspiration from Area51 's nice and minimal mount for Makita batteries, I set out to design something sturdy and…
Edit 10-Apr-2025: Added another box with upper edge for possibility of stapling several boxes. Don't you also have several makes and sizes of Torx 10 self tapping screws? How do you manage your assortment? Took a standard gridfinity box…
Don't like your groceries list being obscured by huge refrigerator magnets that are to flat to grab them. Maybe give this quick, one coloured print a try and finally get rid of those last 40 cm of your old Prusament Galaxy Silver spool!…
Works with 20V Accu from Worx System Update: NEW Version without support Print instructions Printed with settings: Layerhigh : 0.2mm Speed: 50mm/s Material: PETG Support: no Support, but you can do it.
The original Worx cutting disc size is 145mm, with original blades the full cutting width is 175mm. There are other versions around but mostly for older Landroids. I wanted to create my own and also make some changes to the original…
These holders are designed for Parkside / Powerfix hex and torx wrenches found at Lidl but they may fit other generic models. The supports are robust and do not tip over easily. Print on one side like in the picture and use a moderate…
This is a slide on for the Worx Android M500 Plus (and possible other models...). I have printed the new rear wheels from the great design from: https://www.printables.com/model/441847-wheels-for-worx-landroid-plus-wr148e and now the…
Here are three different holders for Allen L-keys in both metric and inch sizes as well as for the Torx L-key. The metric holder holds 9 Allen keys from 10mm to 1.5mm. The inch size Allen key holder holds 13 keys ranging from 3/8" to…
Made the wheels from ABS+ (note: these are a tight tolerance, used acetone to lightly soften whilst bolting on) Wheels have holes for press in M3 inserts this is to mount a steel weight. I profile cut a 10PL and match drilled to fit.…
Download the most up-to-date version on MakerWorld: https://makerworld.com/en/models/20884
Komplettrad für bessere traktion. Felge aus ASA-X, reifen aus TPU bzw TPE Felgen sind mit 2kg blei gefüllt und somit ist die traktion perfekt. ( 2kg Bleikugeln 4mm Durchmesser ) Wurde dann mit epoxidharz ausgegossen Reifen wurde mit 50%…
this is a two part easy print disc, with a disc diameter of 200mm for the Worx Landroid 1500L Print instructions Category: Outdoor & Garden Summary this is a two part easy print disc, with a disc diameter of 200mm for the Worx Landroid…
A spikes for better grip that helps a landroid going uphill or in a sharp corner
This Worx PowerShare 20V battery holder mounts to the wall and positions the batteries horizontally at a slightly upward angle. This allows for the batteries to be stored closer together than the traditional vertical holders. ***PLEASE…
I added two drawings to check if fits your tools. Look especially at the 70 mm dimension; use a caliper to see roughly how long your handle is from the center of the key. Mine is designed for the Parkside line but it should fit every…
Ein Wand und ein Stehhalter für den Parkside Torx Steckschlüsselsatz. Den Stehhalter habe ich nicht gedruckt, weil mir der Wandhalter reicht. Wäre schön, wenn jemand den nach dem Druck hier postet. Nach Anregung eines Druckkollegen habe…
Cover for the screen and buttons to protect you Worx Landroid Vision from dust and rain. Printed with PLA but ASA would be more suitable for its UV resistance. Fit into place and hold to the robot thanks to tight clearance. UPDATE : After…
organizer for Torx socket set. This was a craftsman kit that I added two additional larger sockets to it. It might not be very useful for anyone else but I figured I would upload it anyways. Please take a close look at the sockets…
I do some hobby lathe work, and spent some time printing tool organizers for everything. This is a simple holder for carbide insert boxes and the torx wrenches associated with them. The holes for the torx wrenches are a bit snug, so…
Our Worx Landlord m500 tends to not only cut the lawn, but also dig new holes with the tires. In difficult situations the mower does not recognize that it is not turning - and uses a brute force move. Therefore I designed other wheels,…
Why 0.3 Nm? source: The right Torque for your Prusa XL Nextruder Nozzle by INVESTEGATE Printing open the PrusaSlicer file as project print the objects using PETG (DON'T throw the purge, may it is needed later). Object torque-case-B is…
Here is my first post, after 1 year spent with my robot mower, I noticed that the wheel at the front deserved to be improved. So I tried to raise it and widen it. it is therefore suitable for the Landroid M500+ WR165E series . Print in…
I got an extra used charging station for my Worx Landriod, but the terminal cover was missing. I designed a new one myself, based on the one from the original charging station I have. I did not make the finger thing, to make it more…
Remixed from https://www.thingiverse.com/thing:3753924 The reason for the screenshot from thingiverse is because i am moving all my designs from there.
This torx screw cover will hide every TX20 screw head! just pop it right in. Normally you buy a paket of these in your hardware store if the old ones break, but due to 3d printing there is no need for that, now you can just print a…
Simple magnetic holder for Wera 967/9 Torx Allen keys. Magnets work great as press-fit for me. The original Wera keys magnetic mount for wera 950/9 hex keys from jcq was too big for the smaller torx 967/9 allen keys, so i created this…
I did not like the wheels of the robot, because it destroys the lawn. So i build a fully printable chain drive for it. For me it works perfect. No more stucks, no more hole diggin from the wheels. Its easy to print and easy to mount. But…
Halterung um einen 20V / 40V Akku von Worx oder Pattfield am IKEA Skadis System zu befestigen. Es werden zwei der Universal Hooks des hervorragenden Sets von CSD_Salzburg benötigt. Die Universal Hooks sitzen bewusst sehr straff in der…
Simple wall-mountable holder for Wera Hex-Plus * and Torx Alan Keys * or L-Keys. Easily to print without any supports. * = Amazon Affiliate Links
The Worx landroid M500 and M700 gearbox replacement gear. Print in Nylon 100% Infill or PLA 100% infill. Gear 4 has to be glued to the shaft. ( I use gutter glue)
Based off the Gridfinity socket rail, I customized this one for a set of Snap-On Torx sockets that I have. Feel free to download and edit the size of the extruded circles for your sockets in fusion with the included file.
Designed for finger tightening of bike water bottle cage bolts, which don't need to be anything more than finger tight, and are often annoyingly hard to get at. Inspired by several different models out there, but mostly by this one:…
Soportes para taladros worx, puede sen compatible con otros taladros, en la lista de archivos dejo una imagen con las medidas, para que puedas comprobar si vale para tu taladro. Drill mounting brackets, for Worx's drills. It maybe be…
Simple replacement for the corner guide which came with my landroid (WR143E), made from cardboard. Just print and use two short m3 screws to screw them together. Fits both at once on a MK3 bed. Note its only for outward corners (as seen…
A 3D printable tray to hold Pittsburgh Tool (Harbor Freight) SKU: 67914, 91238. Tray features individually sized pockets, and places to embed magnets to keep sockets in their place. Print instructions If using the gcode provided, the…
Mostly made to work with VorxtrudORT . 4wall line, 40+%infill, 6 bottom top solid layer Rest all the BOM can be the same. Only need three extra M3x12 bolts for motor mounting that is it. Cheers. Similar to Sherpa Heavy, but do not require…
Welcome to the over-engineered Torx Screw Cap design. It prints without support and has a squeezable pin with a 0.4 mm slit for adjusting to screw imperfections. It includes an external lip for covering screws that aren't completely…
The laser-cut parts are made of 3mm stainless steel. 3d printed parts are made of ASA to last in outdoor conditions. Other materials may be used. The wheels are about 700 grams heavier than the originals (each). The extra weight will help…
Hold your MakerX stuff on Skadis. Uses Linearcline's T clip system.
Cubes Cubes Cubes! Everybody likes printing test cubes. But XYZ is boring! So we worked with Dom from Geektoybox (https://twitter.com/geektoybox) to create this model with our logo on it. Print it…challenge it…share it !
Tamper Resestant Torx Head/Screwdriver
Remix for Wera VDE Torx Screwdriver Holder (Wera 167 i)
I made this for the Worx landroid WG790 series, because the bearings on the originals were busted, and the wheel got destroide when i tried to remove them. Print instructions Category: Outdoor & Garden Summary I made this for the Worx…
Remixed from the HSW variant, now comes the Skadis version to hold your set of WERA torx wrenches onto your existing (or soon to be) skadis wall! I have the pleasure of uploading this on behalf of the mad-lad maker, Fox, who designed…
I got this nice Wera Torx tool set as a gift and really like the Wera Hex Holder from Kevman , so I decided, as a nice learning exercise, to recreate this for the Wera TORX set, as it has different dimensions. So at the origin the design…
Hilfsmittel um Mähroboter Klingen zu Schärfen. Getestet nur mit original Worx/Positec Klingen, andere könnten durchaus auch funktionieren. Die Klinge sollte aus Sicherheitsgründen nur mit einer Zange eingesetzt werden. Kann auf einem…
Compatibility This bin is compatible with the Wera Torx L-wrenches set (TX8 to TX40) . General It is 2 x 4 x 3 Gridfinity units in size which corresponds to a size of 84 x 168 x 21 mm + rim heigth. The height was choosen to match the…
A sturdy cordless drill holder for almost all cordless drills (Makita, Bosch, Einhell, DeWalt, Ryobi, Black&Decker, Worx, Scheppach and many more). This holder will take any drill chuck with 43 mm outer diameter and a maximum length of 70…
Replacement screw for the Worx Landroid base station and cover. No supports needed
This wheelcover is designed for a Worx Landroid s 2017 Print “Niet” 3 times which holding the ring. Melt it down on the backside of the wheelcover
Based on Zack Freedman's Gridfinity "Templates.f3d" file. If you like this design then click here to check out my other uploads. Happy printing!
This is a remix from "Studded wheel for Worx Landroid by hasherdk on Thingiverse: https://www.thingiverse.com/thing:4484401 ". Thingiverso did not let me enter this in its Remix Field. Design is not proven on a real mower. So before…
Wall holder for torx or screw drivers. Originally made for five torx drivers from T6 to T10 but upon cleaning I found I had a T20 so made another holder for six drivers. Found that my screw drivers also happen to fit it so that was a nice…
List of models: AMBROGIO ALEX ZCS, L15, L15 DELUXE, L200, L250 DELUXE, L250I ELITE, L250I ELITE S+, L350I ELITE, L400I BASIC, L400I DELUXE, 4.0 BASIC, 4.0 ELITE, 4.36 ELITE, L60 ELITE, L60 ELITE S+, B6, L30,D3, L3, S3, L32 DELUXE, L35…
Very happy with Harseis' larger XL tool box, but I wanted to leave the 3mm allen key with the torque attachment on it and have the extruder torx tool in the lid to be more handy.
This was made specifically for snap on set P/N: 212EFTXY which has T8- T25 Torx socket drivers in ¼" drive, and T27- T55 Torx socket drivers in 3/8" drive. Other brand sockets may or may not fit, YMMV. Images are of it printed in…
Color changes have been made in the print. The "nuts" are glued and the center cap is press fitted, for access to the center nut.
This organizer holds 24 drill bits in total: 8 each of Torx, Pozi, and Philips head bits. The bits are minimally tilted to the back and the hole tolerances are made for a loose fit , so you can take out a bit without accidentally pulling…
Trichter für die Worx Original Garage um den Landroid schon bevor er im Nassen durch den Garten fährt in die Regenverzögerung zu bringen. Durch den Trichter läuft das Wasser gleich auf den Regensensor und der Mähroboter bleibt in der…
Works Landroid wheel cleaner with rounded handle for more comfort
I printed this on Ender 3 v2, 0,12mm layer height, 50% infill
To hold the battery on the wall.
![[V2] Worx Landroid Vision cover](https://media.printables.com/media/prints/874534/images/6709901_c7e235de-8a2b-40e3-8ebb-6ef91ecfe4e4_8559f01f-85ef-49b6-976e-3862462a6e36/worx.png)
![Gridfinity Socket Holder (5 slots for 3/8" Socket) [Torx Bit shown]](https://media.printables.com/media/prints/353138/images/2999026_07256212-9c68-4505-8949-cbf6b022b0c9/pxl_20221229_200232621.jpg)
