Counting matching models…
These are two holsters for the compact 16ml pepper-spray bottles of Walther . I needed a way to somehow attach it to a cord, to hang it in an easy to reach spot inside my car. I printed it vertically using Prusament PETG – the…
Print approx. €0.78–€0.95 excl. taxPreliminary estimate for PETGSource material: PET
Update 29.02.24: Grüße geht raus an alle heutigen Geburtstagskinder =)! Danke an @Hanno_1419514 für den Denkanstoß zu der guten Verbesserung die Ventilblöcke einfach unten offen und komplett ohne Infill zu drucken! → (Prusa Slicer) Die…
This is a noseclip for swimming pool. Material ASA Infill 100%
This is based on the badges worn by defense attorneys from the Ace Attorney series. It is only really shown in the Miles Edgeworth Investigations series, where it is explained that most prosecutors choose to just carry it in their pocket…
My original nose cover for HTC Vive became brittle due to old age and spares aren't easily avaiable so i designed a printable one. You need to print it in TPU (preferably black so it matches the interior of the headset) and then bend it…
Scalable nosecone with builtin whistles for model rockets (glue required)
If you would like to show some gratitude for this model and encourage me to create more, you can leave a tip for me via PayPal at https://www.paypal.com/paypalme/Arogen67 . Thanks. Estes released model rocket #1301 - R2-D2 Robot Hero in…
Nosecone for Estes BT-60 tubing. The nosecone has a shoulder that screw on so to accommodate a tracker or altimeter. Print instructions Category: 3D Printing
If you would like to show some gratitude for this model and encourage me to create more, you can leave a tip for me via PayPal at https://www.paypal.com/paypalme/Arogen67 . Thanks. This is a quick rendering of a Big Daddy nosecone. Not…
If you would like to show some gratitude for this model and encourage me to create more, you can leave a tip for me via PayPal at https://www.paypal.com/paypalme/Arogen67 . Thanks. This is the nosecone for the Estes Der Big Red Max model…
This is an accessory to connect a hose (Diameter of your choice1-15mm) to a Dyson vacuum cleaner. Sometimes you need a hose on your Vacuum cleaner to reacht to areas that are difficult to access. To print adapt the print for your needs…
If you would like to show some gratitude for this model and encourage me to create more, you can leave a tip for me via PayPal at https://www.paypal.com/paypalme/Arogen67 . Thanks. These are downscaled versions of the Estes Der Red Max…
This is the latest iteration of my 3-in nosecone designed for use with the Estes Big Red Max or the Great Goblin kits. It can also be used for other 3-inch rockets. I designed it to print in two parts but realized that most printers do…
Has to be printed in TPU, because it is fitted around the bottle by stretching it a bit. TPU82 used for print shown. Printed without support (upside down) and with 20% infill to add a bit of weight to the top. Weight is needed to become…
The 3-in Doorknob Nosecone Ebay Upgrade! Introduction: This model is an upgrade to the Estes 3-in Doorknob and to my 3-in Doorknob Builders Kit . It includes the ring that will fit inside the shoulder of the nosecone, the ebay sled, and…
If you would like to show some gratitude for this model and encourage me to create more, you can leave a tip for me via PayPal at https://www.paypal.com/paypalme/Arogen67 . Thanks. This is the nosecone for the Estes Der Big Red Max model…
5:1 ratio ogive nosecone designed to fit a tube with an OD:41.6mm and ID:40.5mm. The nosecone has been split into 3 separate parts so that it can be printed on a small print bed. The nosecone is two parts with a maximum hight of 120mm…
Introduction This is a nosecone and internal ebay designed to pair with IPL's PowerSlide fincan. The ebay sled also originates from IPL , but has been heavily modified to fit in this nosecone, and should be able to accommodate most…
Assembly instructions: Tap M3 threads into holes into fan mount holes on lid or use self-tapping screws M3 * 14mm to secure 30 x 30 x 10 5Vdc fan to lid. Secure FAN to lid. Tap M3 threads into receiver holes on base for the lid or use…
If you would like to show some gratitude for this model and encourage me to create more, you can leave a tip for me via PayPal at https://www.paypal.com/paypalme/Arogen67 . Thanks. This a generic Ogive nosecone for a BT-80 model rocket…
If you would like to show some gratitude for this model and encourage me to create more, you can leave a tip for me via PayPal at https://www.paypal.com/paypalme/Arogen67 . Thanks. I wasn't satisfied with the accuracy of some other models…
Print form ASA,PETG,ABS - PLA only when you dont use really hot water
These models are the before and after STLs used in my “Lets Build…” series . The one named, “sample nosecone” is just over 376mm tall. The second model is the STL that has been split at 200mm, as detailed in the video. These nosecones are…
If you would like to show some gratitude for this model and encourage me to create more, you can leave a tip for me via PayPal at https://www.paypal.com/paypalme/Arogen67 . Thanks. I had planned to make a BT-80 based upscale of Der Red…
I really liked the monitor stand by Choosecool. But even my small repurposed laptop screen was too heavy for it, and the base got bent. So I took the chance, and redesigned it to be stronger (now it is supported on the front to prevent…
If you would like to show some gratitude for this model and encourage me to create more, you can leave a tip for me via PayPal at https://www.paypal.com/paypalme/Arogen67 . Thanks. This is a BT-70 upscale of the Estes Der Red Max nose…
This holds the cheep square cameras sold on eBay as "Spy Cameras" so you can take video from a Estes rocket. Category: Hobby
Nosecone assembly for 4inch inner diameter 4.25inch outer diameter rocket
The great Grace Hopper gave away lengths of wire to illustrate the distance light could travel in a single nanosecond. I needed to illustrate something similar in a presentation but showing a wire on stage isn't very visible. So, I made…
Wall mount for a small fire extinguisher. The opening has a diameter of 87mm and fairly snuggly fits an OSEC 1kg dry powder fire extinguisher. Prints as two parts that are held together after screwing it to a wall.
This nosecone was a online request.... Mega Der Red Max Nosecone The nose cone is 16.5" / 420mm from the tip to the shoulder. Made to mount on 4" diameter body tubes Category: Hobby
Wedge shaped sci-fi cockpit nosecone for building clones of out-of-production low power rocket models like the Estes Attack Craft Orion or Manta Bomber from the 1980s. Scaled for 24mm ID body tubes (BT-50), 18mm ID body tubes (BT-20) and…
Why are you reading the summary? All the information is in the title.
2.6" Nosecone ‘kit’ This collection will allow you to print the shoulder and nosecone shape separately, allowing you to use the hollow interior for ballast or avionics. The loop hole in the base of the shoulder allow you to easily attach…
Parts for building a 2 stage LPR model rocket. Motor mounts for 18mm motors in a 24mm (BT-50) body tube. Motor mounts are complete with staging coupler. Nosecone and plug/Coupler allow for a payload bay (can be clear tube). Rear engine…
this is a model rocket nose cone that I made for a rocket, thought other people could use it. you might want to resize it based on the rocket's circumference and height.
Dámská alternativa pivních ozdob. :)
This was made so I could mount my camera and teleprompter to my office ceiling by means of a VideoSecu ceiling TV mount. The TV mount is substantially cheaper than custom camera mounting brackets and truss systems, and is very flexible in…
Model Rocket Nosecones with a loop to attach your recovery system, and a space to hold some clay ballast securely. Can easily be scaled to meet your needs. While these can be printed with little to no infill, I recommend 10-15% to keep…
Meridian Arc Prosecutor is a judicial enforcer of the Meridian Dominion , tasked with turning doctrine into action across the fractured frontier. Armed with a compact sidearm, a tactical data slate, and the visible authority of office,…
Created the PNC-55D estes nose cone used on the following rockets numbers 0816 Wolverine 1285 Teros 1311 Laser Torpedo 1901 Sea Dart 1930 Wasp 1958 Black Brant II 2015 Strike Fighter Category: Hobby
This is an electronics sled for a Wildman 3" Punisher. It has space for redundant altimeters (Eggtimer Quantum and Quark) and a FW GPS tracker. The FW tracker is designed to hold a small tracker sled that allows me to move the tracker…
this design has a more efficient drag coefficient
STOP, THIS IS A BIOSECURE AREA, SIGN Category: Signs & Logos
Have you ever wanted to harness light-speed? Get to grips with the vastness of the universe? Or just sound really clever while underlining your paper about the mysteries of the cosmos? Well now you can! Meet the light-picosecond ruler:…
I used this nose cone for the model rocket seen in picture. Edit and scale to your needs.
100x160mm sign, warning off specific flavors of lawyer. Mesh and Solid models provided. The solid version might be an easier print. Best with color switch above 1mm, as with included gcode for the mesh version. Also see the Shadowbox…
This is a remote holder for the newest lines of Samsung's TVs. This design has 15mm diameter hoseclamps. on the back.
Print in petg 40-50 infill, 0.20mm work good i use it for the LK systems water hose in hose, common in sweden
This blank plug is designed to seal BS 2.5-inch water supply outlets and protect them from dust, dirt, and contamination . It includes a small hole for attaching a chain or cord , allowing the plug to be secured to the hydrant, vehicle,…
Kryt proti vosám na plechovku Prosecca :))
Belt holster for Walther ProSecur Pepperspray 53ml
6mm Dosierschläuche beim Aquarium gedruckt aus PETG. Die Verlängerung damit die Schläuche nicht an der Scheibe liegen.
This is a hollow thick-walled model rocket nosecone, sized to fit a used toilet paper roll. Add fins and a motor mount and a launch lug if you like, to make an actual flying model rocket. Fits any tube with an internal diameter of 41 mm,…
Created during the period of time when there was a mask shortage and there weren't many available. Still this is economical as you can buy hundreds of coffee filters for the price of mask and it probably (no guarantee) provides much…
Nosecone Mount and Coupler for the PML X-Calibur to fit the Eggfinder GPS unit & 7.4V LIon Batt. Requires: - 2.5mm x 4mm Heat Insert Nuts x8 - M2.5 x 7mm Cap Screws x6 - M2.5 x 5mm Cap Screws x2 - M6 Eye Bolt and M6 Lock-Nut I printed…
This is a replacement nose cone for the vintage Astro Rocket Ship mechanical savings bank from the late 1950s. Original nose cones are commonly cracked, missing, or damaged, so this model was designed to help restore these wonderful…
This is a custom FPV nosecone (walksnail) for the Facet Opal RC model created by BUILT FAST (Kyle) https://cults3d.com/en/3d-model/gadget/facet-opal Kyle created a great model i really liked, but i also like flying FPV, this nosecone…
A small model rocket nosecone with holes for peg attachme and a compartment to fit a Pnut/altimeter inside.
This is a collection of nosecones I have made for the rockets made in the model rocketry club at my school. The models are based on the parabolic nosecone shape with rounded points to improve durability. The four models I uploaded are the…
A work friend joked about having a 3D printed wine glass :D I suggested a half sectioned glass with text on it. A round ring magnet is superglued into the rear recess. I've included a non text version for either the rear of the glass or…
6mm Dosierschläuche beim Aquarium gedruckt aus PETG. Die Verlängerung damit die Schläuche nicht an der Scheibe liegen.
A small model rocket nosecone with holes for peg attachme and a compartment to fit a Pnut/altimeter inside.
This is a remix of the powerball top cover, to have 3 prongs instead of 4. May require model to be solidified before printing.
Wedge shaped sci-fi cockpit nosecone for building clones of out-of-production low power rocket models like the Estes Attack Craft Orion or Manta Bomber from the 1980s. Scaled for 24mm ID body tubes (BT-50), 18mm ID body tubes (BT-20) and…
This was for a project where I made a paper rocket, so the nosecone fits perfectly into a 1.0575in OD hole. There is a .1mm difference in the overhang, which will perfectly fit on construction paper which is .1mm thick. The walls are 2mm…
