Counting matching models…
My OSSC with injection molded case (https://videogameperfection.com/products/open-source-scan-converter/) collected dust via the non uses left window (where buttons are) and thus this cover. Should be compatible with…
I got bored and decided to make my own spider gauges, while these are fairly plentiful in the US, it may be a fun way to make your own tools when working on crosscut saws! I am working on a long jointer and possibly a short jointer/raker…
elbow connector for hikoki crosscut saw type C8FSHG
Blade guard for a table saw crosscut sled. The guard can be installed in either the long or short direction, depending on the blade size and height of the sled. Category: Parts
I recently bought a new OSSC with the AV input, the official case it's not ready yet so I designed my own, it's using M3 screws to lock the baord in place.
Modified both bottom and top a little, needed some room for PCB and connectors. Also display alignment was a bit off for this model.
I was looking for a solution to fix and remove if necessary my Pi Dim Boot, my OSSC and my mini voltmeters.
This is a printable stop that fits in standard 0.75" T-track and can be used to set the cut distance on a variety of crosscut sleds. It uses two embedded magnets to raise and lower the stops, which allows you to keep this in the same…
Il s'agit d'une scie à onglet Metabo KGS 216 M. Le cache qui se trouve sous la lame et qui protège le laser et la lampe LED était cassée. J'en ai profité pour remplacer la LED OEM par un modèle plus puissant:…
Remplacement du déflecteur de la scie à onglet Metabo KGS 216 M qui n'est plus disponible comme pièce de rechange (n° 41 Extraction channel selon liste de pièces Metabo pdf). Visitez également mes trois autres modèles de pièces de…
This 200mm crosscut jig provides a secure 90° guide for handsaws, improving cutting accuracy and consistency. It is designed for 12mm diameter, 3mm thick magnets, but smaller magnets with enough strength will also work. The reference face…
This is a prototype replacement for the standard DIN 96 dust cap used on the water tanks of the Opel Crosscamp camper. The original cap tends to break easily during regular use. This custom-designed version aims to offer improved…
My OSSC with injection molded case (https://videogameperfection.com/products/open-source-scan-converter/) collected dust via the non uses left window (where buttons are) and thus this cover. Should be compatible with…
So as you might suspect this is a mosscreep enemy from hollow knight, its my first model so its a little janky. Here are some tips for printing and paint mixing: supports are needed, be very careful while removing them around the legs i…
I try to mount my bicycle rear lights as high up as possible. All of my battery powered bicycle rear lights are optimized to be mounted right below the saddle on the seat post - the ideal position. Unfortunately in my case this space is…
This is a lightweight back-up/limited use crosscut saw handle. These parts will have limited life, but will work in a pinch. I print using PETG and 100% fill and the Saw Handle Part 4FW is a version that accepts 1/4 flat washers at a…
Someone complained that the OSSC had no proper shell - and I agreed. Given the current trends, I came up with this design. Take a good look and you will notice many functional designs put in to this model. Can't really call it "proper"…
I originally designed this crosscut flipstop for my Mafell Erika table saw, but with a few modifications of the slider it can also be used with other fence profiles or even other machines like a drill press or a crosscut saw. Feel free to…
I got bored and decided to make my own spider gauges, while these are fairly plentiful in the US, it may be a fun way to make your own tools when working on crosscut saws! I am working on a long jointer and possibly a short jointer/raker…
elbow connector for hikoki crosscut saw type C8FSHG
If you're like me and you get easily annoyed with devices getting moved around, then this the solution for you. Takes less than an hour to print, costs less than £1 in PLA and takes 5 minutes to mount. Requires 2x M3x10 countersunk head…
Support articulé pour X-RIDE de chez crosscall. Il est rallongé de 20mm. Je le propose en deux version: V1 standard et V2 prévu pour des impression multi matériaux (TPU et ASA) par exemple. Ne pas hésiter à me contacter pour d'autre…
Remplacement du guide lame. Imprimé en deux parties. Scie à onglet Metabo KGS 216 M. Visitez mes trois autres modèles de pièces de rechange pour cette scie: Cover lighting Bouton/poignée Extractor channel
Replacement for Crosscamp / Dethleffs Push Lock Button
Hi, this is my first design of a tablet holder on a motorcycle. After several tries with the original crosscall support and having lost the tablet several times in the mud and the road XD I designed my own. Quite easy to print, just put…
Open-Source Smart Curtain Rod – OSSCR What’s OSSCR? OSSCR stands for “Open-Source Smart Curtain Rod”. This is probably the fastest DIY smart home solution for automizing your curtain. Short demonstration Video Features • Affordable •…
The Rockler Crosscut sled needs support along ¾ of its base, the Dewalt491RS does not provide enough table length for that support. This clamps to the Rolling stands' handle to provide that support, at least for the center of the sled.…
The lever from the Atika KGSZ 210 chop and crosscut saw was broken. No new part from the Manufacturer was available, so
These are the print and object files for the OSSC Case as created by Laser Bear Industries. This case fully encloses the OSSC. It vents hot air through the logo at the top of the shell and pulls fresh air in through the bottom using heat…
Tittle says it all. I'm not well versed at modeling yet, so sink it through the bed for backer delete.
Disappointed with other options (difficult to attach to a workbench, durability, lots of material/print time) I made a basic crosscut guide to fit those portable workbenches that have a clamping function. 10x10cm (4"x4") opening for your…
Replacement insert (sacrificial board) for METABO KGSV 72 Xact SYM crosscut miter saw. As a spare part or as a tuning, because: No sacrificial board required in contrast to the original, a tear-free saw cut as this insert is closed.…
This model remixes the main table from https://www.printables.com/model/456310-transformable-dremel-table-saw-disc-sander-shaper, so you'll need to download and print that model as well, potentially skipping the main table from there…
This is four half-coils that meet at the top to form peaks, and at the bottom they meet a base with a spherical section cutout. My intention with this piece is to show off what the spool rotator can do with coextruded filaments:…
a keychain using deterrence dispensed's logo, often used as fosscad's logo probably rescale to 20%
Perfectly working dust collection bag insert for Makita crosscut saw. Self designed. Secure the dust collection bag with a cable tie. Maybe it also fit other brands. No supports print.
-more stable -easy to print -better cooling -removed JTAG-cover
This is a crosscut sled for a small bandsaw. I originally designed this sled to be made from ⅛" laser cut plywood, though the parts could also be 3D printed. The attached PDF file includes a layout of all parts for laser cutting. To…
Vertical stand for your OSSC PRO, with easy access to USB, power and SD card.
A blade guard is important to prevent accidents when using a crosscut sled but they make the sled itself clunky and awkward to store. The blade guard attaches to the fence using the same T-Track you might already be using for your stop…
Most dry cutters do not have industrial quality and therefore adjusting the cutting corner may be hazardous. The most used corners are 45° en 90°. The templates has a rill that fits in the blade crevice. If you fasten the guard against…
Most dry cutters do not have industrial quality and therefore adjusting the cutting corner may be hazardous. The most used corners are 45° en 90°. The template has a rill that fits in the blade crevice. If you fasten the guard against the…
This type of paper shredder has moulded teeth that keep the rotating drum clear of the paper strips it is generating. Those teeth are part of the housing, so when they break there is no practical replacement part available to keep the…
This stop block was designed, after the table saw found the stop block that came with my crosscut table saw sled...don't do that. After a few moments of sadness, inspiration struck and in a flash and a very fast mad dash…plus a few days…
Karcher vacuum to Ferm crosscut saw 30 mm binnenmaat, 32 mm buitenmaat
This replacement case for the HDMI version of the OSSC will protect the sensitive circuit board while still allowing easy access to all of the ports and has built in ventilation holes to keep it cool. To assemble it, use four M2.6 x 12mm…
I bought a hand tool woodworking book called "Woodworking Joinery by Hand" and it detailed a number of very simple magnetic jigs to help sawing wood and keep the saw at the correct angle. This is a simple version of the crosscut jig from…
For those of us that program micro-controllers, I present the Rowley CrossConnect Lite housing. This is made to protect our investment in this tool, our development boards, our PCs, and our peace of mind. It should be noted that the…
A simple holder for the OSSC Remote. I use it with double sided tape, but there is enough room to use screws.
Die werkseitig verbaute Kederschiene beim Crosscamp (und den neueren Campster-Modellen) hat ein unübliches Maß von 10mm. Der Halter kann für Klettbefestigungen o.ä. von Busvorzelt, Tarp, etc. genutzt werden. 70mm Gesamtbreite, Öffnung…
I bought a hand tool woodworking book called "Woodworking Joinery by Hand" and it detailed a number of very simple magnetic jigs to help sawing wood and keep the saw at the correct angle. This is a 45 degree version of the crosscut jig…
