158 models
This model was printed on a Prusa MINI+ printer with custom embossed text without any support. It can therefore be printed without the option of a multi-colour printer. In Prusaslicer, on the bottom side you create your own embossed text…
omezovač má zabránit vylomení pantů dvířek, použitý zdrhovací pásek 1,2 x 4,8 mm délky 300mm
Dosing capsule loader for POTV Lobo dry herb vape. Similar to (PAX) budkups, scraper can be used to push up capsules so lids can be put on.
One word and one word only. BULLETPROOF! FEATURES Will 100% make your Dummy 13 seriously bulletproof. The armor has throat protection, deltoid (Shoulder/upper arm area) protection, side protection, lower back and side protection, abdomen…
Its use is pretty simple and straightforward, if you know you know. This works for Storz & Bickel capsules and also works for the Planet of the Vapes (POTV) capsules that fit the Lobo, One, etc. I recommend printing “right-side up” for…
POTV sellls inserts for their model ONE. Didn't feel like waiting, on top of spending $14.95 for a print, so i made one. I printed on Standard PLA. 0.2 Nozzle. With supports. It may print without but I didn't bother risking with letters…
[EN] When opening tins and cans with a tear eye, it often happens that the eyelet fits tightly against the lid and when it is lifted, it can cause the nail to break. Thanks to this opener, even such an eyelet can be easily lifted. Two…
POTV Lobo Station to put all the lobo stuff together. Also for the Lobo. ThightVac Insert Pod Filler Scoop To clean glassware
Pant nábytku – opakovatelné otvory 26mm
This is a Speed loader for herb capsules that fit into the Planet of the Vapes Lobo unit. Loading capsules can be a pain. It can be messy. It can be slow. Now this is here to help. If this is something you're interested in, check out my…
Hold everything you need in a ThightVac. It have little arm to help removing the pod without having to remove the insert. Hold up to 15 pods (capsule), a brush and a tool . Or 10 pods and place to store used one without juggling between…
Update: I've added a version that includes grease channels to help retain more grease. This drive gear replacement for the Neato Botvac D7 is bolstered to ensure it is strong enough to withstand the forces the beaterbrush gives it. The…
After a few years of use the dustbin was not latching to the vacuum cleaner and this rendered the vacuum cleaner useless( sensor detects whether the dustbin is properly closed). At first glance the part could be glued, but this was only a…
Záslepka pro otvor 83mm. Koukněte i na mé další modely .
Help filling POTV Lobo vaporizer pod with a optional pod lifter to remove filled pod. Works Great with Scoop Also check ThightVac Insert Station To clean glassware
I modeled this to replace the worn out hexagon portion of the Neato Botvac that seems to tear up on every vacuum. I printed mine no supports, but on a raft just to make sure the gear teeth came out clean. I have about 6 months of runtime…
A compact bottle opener that you can have with you at anytime. You need only 2 washers with 8.8mm outside diameter and 0.8mm thickness (the inner diameter is usually 4.2 - 4.4mm, but it is not significant). Print instructions I recommend…
Kotvenie je do dvoch otvorov pod sebou. Skrutkovač stačí zdvihnuť o 10mm a zobrať. Po nasadení zostavajú kolmo, nekývaju sa.
I printed using the AnkerMake M5C using their PLA+ Grey Silk filament on fast print with Auto Generated Supports on.
I made the scraper 14 mm wider, bringing it from 26 to 40. The tray was modified to accomodate the larger scraper. I also inlcuded a little packer on the end for the capsules, which was useful on my pax budkup system edit: I added a…
I had a water pipe adapter (WPA) from Planet of the Vapes (POTV) for my Storz & Bickel Crafty+. Unfortunately, it didn't fit the Venty. So, I spent some time learning Fusion to create a modified plastic ring to fit the Venty. It uses the…
I have browsed and looked at MANY classic chess set. I would like a game with a clean appearance that is easy to decode with good playability. I like the slender Russian pieces with heavy bases. When I came across Botvinnik-Flohr ll sets…
I did not want to spend $15 on the linked POTV Lobo Tightvac Capsule Caddy below. https://www.planetofthevapes.com/products/potv-lobo-dosing-capsule-caddy-insert-for-tightvac-0-6l Just a heads up, this model is a little loose inside of…
This is a hard shell case for the Planet of the Vapes (POTV) Lobo vaporizer. I wanted something that was a close fit, reasonably airtight to control odors, and had some latitude on the height of the case depending on the glassware in use.…
Náhradní mřížka na zahradní domeček. Ideální pro rozměr 198x78. Díky přiloženému modelu je však velmi jednoduché upravit rozměr pro jiné rozměry. Doporučený plast je UV stabilní ASA, nebo podobné.
V programu www.tinkercad.com jsem vytvořil válec a „položený“ válec, který jsem rozměrově upravil pro snadný úchop rukou. Do obou jsem vložil válcový otvor 3cm na uzávěr, válcový otvor 2 cm a otvor kvádru pro pružení. V programu…
How does it work: https://cdn.blog.prusa3d.com/wp-content/uploads/2022/12/VID-20220629-WA0000.gif The door frame is approx. 400x400mm. Cutting it in PrusaSlicer may be necessary (depending on your printer type). The pulley wheel should be…
Otvírák na pivo v motivu Warcraft Hordy. Rozměry: Délka- 91 mm Šířka- 67 mm Výška- 8 mm V nastavení tisku: 20% výplň. Žádné podpěry. Možnost změna barvy v přechodu z podstavy na logo. V jedné z fotek je ukázáno čím se lahve otevírají.…
Chemická kotva - šroubovací hlavice pro aplikaci hmoty. Vnitřní šnek by měl zároveň pomoci mixování dvou složek. Tisk bez podpor. Doporučuji co nejmenší výšku vrstvy pro snadné zašroubování (já tiskl 0,12mm layer height s 0,2mm…
I bought 12 of them, and its easier to fill 12 at once! Let me know if you have any issues printing this model.
Filter for a one way valve for wells etc. 3 different sizes
Držák WAGO svorek 5x 5W na DIN lištu+montažní otvory. Velikost WAGO cca 30x10x18.5mm. Koukněte i na mé další modely . Pokud mě chcete podpořit, můžete zde: PayPal , BuyMeACofee , QRCode . Děkuji
the only cookie cutter a man needs - memories of beer will bring tears to his eyes, believe it.. jediné vykrajovátko co muž potřebuje - vzpomínky na pivo mu vyhrnou slzy do očí, věřte tomu..
A full rugged enclosure for the Plant of the Vapes (POTV) Lobo system. Perfect friction fit rugged case with top and bottom inserts for all your storage needs: Used/dirty dosing capsules The Lobo itself 1 x 18650 Battery (one inside the…
The three models are: the base, the lid, and a converted that will convert one of your 18650 slots to a mouthpiece slot just in case you have too many mouthpieces and not enough batteries, like me. You should only need to print 2 of these…
Otvírák na pivo pro nejlepší táty. Nezapomeňte vložit minci 1 KČ! Před slicováním je třeba model zmenšit na 9,96% velikosti (tj. na velikost 45,8 x 101,89 mm) ! Nastavení tisku: Materiál: PLA Tryska: 0,4mm Teploty: 200/60 °C Vrstva: 0,2mm…
A beautiful minimalist painting of a Sailor with anchor on the wall or with a stand on the table. Size 180 x 200 mm You can find the small print stand for the table on my profile ↓…
Otvírák na pivo pro Ufony. Nezapomeňte vložit minci 1 KČ! Před slicováním je třeba model zmenšit na 9,96% velikosti (tj. na velikost 45,8 x 101,89 mm) ! Nastavení tisku: Materiál: PLA Tryska: 0,4mm Teploty: 200/60 °C Vrstva: 0,2mm…
Hladal som taký tvar , aby bol čo najekonomickejší na spotrebu materialu a dlžku tlače. Súčastne som chcel mať nablízku popis velkosti nastavca. Preto som zvolil centrovanie za hranatý stred a nie centrovanie na obvod, lebo orech 32 je…
krytka vetracích otvorov v nástupnom priestore karavanu WEINSBERG CARACOMPACT 600MEG. Otvory sú zdrojom hluku počas jazdy. Krytky zreteľne hluk znížia.
Printed in overture PLA+ .2mm Snug supports under flat brim only
Vytištěno z PETG, bez nutnosti podpěr. Budu rád za LIKE, případně foto a koment :-) Printed from PETG, no supports required. I would be happy for a LIKE, or a photo and comment :-)
Soak POTV glassware for Lobo. Use minimal amount of alcool. Print with more top layer to prevent leaking. Lobo station ThightVac Insert Pod Filler Scoop
A hollow drive modeled after the ones used in Voices of the Void. Has holes for LEDs and a Cherry MX keyswitch. I recommend soldering resistors and wires to the LED's first, then placing them in the holes and use hot glue to fix them in…
Designed for a 10mm opening. Material: PLA+ White or TPU Infill: No Filling: 20% Diagonal
SK Jednoduchy premotavac cievok filamentu sedi na spulky od Alpaplastic Odporucany material PETG, 20 Stien alebo 100 infill potrebne suciastky: 1x DIN 933 M 6x50 8.8 ZN 1x DIN 557 M 6 ZN 1x Sekundove lepidlo 1x…
Tisknu z ABS bez podpor.
Printed with PETG Pro, you will want to rotate the model in your slicer to have the top of the model on the print plate. No supports needed.
Držiak pre klasické posuvné meradlo, petg.
kryt na toaletní papír s otvorem na odtrhávání
Otvírák na pivo pro nejlepší táty. Nezapomeňte vložit minci 1 KČ! Před slicováním je třeba model zmenšit na 9,96% velikosti (tj. na velikost 45,8 x 101,89 mm) ! Nastavení tisku: Materiál: PLA Tryska: 0,4mm Teploty: 200/60 °C Vrstva: 0,2mm…
Plastová okna mají otvory pro odvádění prosáklé, nebo zkondenzované vody. Původní kryty otvorů po čase degradují vlivem slunečního svitu a UV záření. Vytiskněte Krytka.stl a nahraďte původní degradovaný kryt.
Priemer otvoru na vloženie kliešti je 20mm. Tlačené z petg.
Výplň pro stavebnici SEVA s otvorem a bez otvoru. Infill for SEVA construction kit with and without hole.
“Piramid” — Inspired by Voices of the Void I’ve always loved the look of the Piramid spacecraft from the indie game "Voices of the Void," so I decided to recreate it as a 3D printable model for tabletop and display. This model is scaled…
A set of pliers and a key to losen a stuck superglue cap. Pliers inner diameter: 12.5mm. No supports needed. Set kleštiček a klíčku na uvolnění zalepeného víčka vteřinového lepidla. Vnitřní průměr kleštiček: 12,5mm. Podpěry netřeba.
[CZ] 🛠 Otvírák na pivo ve tvaru kladiva Originální 3D tištěný otvírák na pivo inspirovaný tvarem kladiva! Model se skládá ze dvou částí – hlavy a rukojeti (body) , které lze jednoduše spojit. 🔩 Montáž Pro kompletaci je potřeba vložit…
Tamp 6 potv lobo dosing capsules at once, but don't pack them too tightly or you'll restrict the airflow. Let me know if you have any questions!
nasadí se na násadu o průměru 22mm
Holds 5 capsules plus a puck to indicate when you are out. Recommend printing the puck and 1 of the caps in a secondary color to mark the ‘used’ end.
Bajonet pro ukotvení dvojitého dna pro Octavii 2
Size is 70,5x20,4x2 mm. Velikost je 70,5x20,4x2 mm.
It's a remix of the original with no support needed. https://www.tinkercad.com/things/fxlI4BvneEF/ Category: Household Supplies
I printed it in PETG for durability on the Satin print surface of my MK3S+. The not completely smooth finish gives it apparently enough grip, such that the robot vacuum can drive up on it. The 150mm width is chosen for compatibility to…
This latch solves the issue by forcing the lid shut. Put a tape on top of the flat surface if it is not tight enough.
Záslepka proti úniku vody přes skimmer při vypnuté filtraci.
Needs to be printed in a flexible like TPU. Its an alternative mouthpiece for the Volcano bags that accepts glass such as the Planet of the vapes or Dynavap stems
The first toy I ever created, Robot V, went through numerous iterations and prototypes before reaching its final form. Each version represented a step forward in my creative process, as I meticulously refined and reimagined the design. My…
Opener for CA hobby glue (20g) Suitable for PECKALEP, KAVAN, and other brands Print parameters PLA used 3 perimeters 0.2 layer height 15% infill Otvírák pro pro CA modelářská lepidla (20g) Vhodné pro značky PECKALEP, KAVAN a další Tiskové…
I really liked the original, there were only 2 things I changed: I turned the designs 180 degrees so it's much easier to print The squares with rounded corners do look really nice, but my printer was not happy with it. So I made the holes…
Šablona pro předvrtání otvorů na čepy do trámků/prken o tloušťce 20 mm (střed otvorů je 10 mm od kraje a rozteč otvorů je 32 mm) Původně určeno pro prkna s profilem 70 x 20 mm a vřeteno s průměrem Ø 18 mm , ale použitelné je i pro…
Oi! dese gits iz redikulous but dey got a propur revolushun started ta free da grotz frum ork oppreshun. A propur komuni....kommooni..koomuni... ...sharin' revolt haz ta haz a komitte: da Gretchin Revolushunary Komittee (GRC) to guide it.…
Najmenší priestor pre ihlové pilníky zabera otočný organizer . Vnútorný zápich na poistný kružok sa čistí dosť ťažko, ale ide to. Pri montáži najprv nasadiť do držiaku poistný krúžok , potom opatrne zasunuť kotuč . Pomahal som si tým, že…
Krytka odvodňovacích otvorů rámů oken
Plug to 7.7 mm hole | Zátka do 7.7mm otvoru If you like this model, give it a thumbs up :)
Case for my raspberry pi BMOtv project. Very similar to the Simpsons TV by Brandon Withrow. Here's the GitHub page it's still a work in progress so check back for updates.
Description Neato Intake and dustbin holder spare part. Made this from measurements of original part. Some differences exists but its mostly the same. Print instructions I printed this in PETG Prusament and have not had issues (yet) with…
Shorter than usual models (25+100mm) In download pack STL + DWG (for changes if it needs) UPD_Rev01: pin connectors 0.5mm less for easier pulling into next modul
Nástavec na otvírání střešního okna pro trubku o průměru 18mm. Adapter for opening the roof window for a tube with a diameter of 18 mm.
Náhradní krytka do dveří dodávky Spacetourer / Peugot Traveller / Toyota Proace Verso. Tištěno z PET-G.
During operation of the botvac, dust accumulates in the filter and ultimately blocks the air flow. The filter is waste and must be replaced. Using the adapter and a hoover, the dust can be sucked out of the filter, thus extending its…
tištěno na multicolor s pauzou na vložení podložky průměr : 16 mm , vnitřní 8,5 mm. tisknuto z PTEG , 100 procent výplň
A simple vase mode TPU sleeve that fits over your POTV One or similar vaporizer if you drop it often like I do or are just looking for a more sturdy way to keep the mouthpiece from falling off. Features Vase mode prints fast! Air intake…
Watering hole stuffing for Savic Rody Cavia cage (70 x 45 x 31 cm), it is originally for guinea pigs, but also can be commonly used for hamsters. We have faced the problem with biting the plastic around the watering holes so I designed…
Krytku jsem vytvořil po tom co se mne už po mnoha letech původní rozpadli.
Výška nádoby: 100 mm Šírka nádoby: 20 mm Počet otvorov: 2 Priemer otvoru: 1,5 mm Vzdialenosť otvorov: 20 mm Nádobku žiaci môžu chytiť do ruky tak, že prstami uzatvoria otvory, nalejú si do nádobky vodu a pozorujú ako ďaleko vyteká voda z…
The printer enclosure from Tukkari TS is simple and inexpensive. It is equipped with a ventilation hole with a cover. Unfortunately the cap is difficult to remove, so I invented a sliding cap. When I print PLA material I open the cap,…
Vytvořil jsem z obrázku png který jsem našel na internetu soubor SVG a z něho potom model stl.
This is just a small leaver to help pop-out the filter in the dust bin. Hope you like it! Print instructions Prints well in both PLA anf PETG
Náhradná pomôcka je použiteľná na otvorenie manuálneho zásobnika na papierové utierky na ruky. Materiál: PLA Priemer trysky: 0,4 mm Výška vrstvy: 0,3 mm Pomôcka je vytvorená v programe FreeCAD.
CZ: Záslepka pro otvor, který vznikl poté co se přešlo na elektrické stahování oken. Nutné tisknout s podpěrami EN: A plug for the hole that was created after switching to electric windows.
![[VOTV] Piramid](https://media.printables.com/media/prints/433bf2c3-10d2-4922-b3a1-e5d6e37d3f53/images/10175381_06d27464-2ed1-4ce9-b4ab-34dbd942fe4e_c83b0a46-b969-47ff-bbf0-1ca1d91303bd/img_2921.jpg)
