Counting matching models…
God, I just need to release these. I'll keep iterating on them forever and never get them out there otherwise. THE NEW AND IMPROVED BLASTER ARMS ARE HERE! READ THIS: ALL of these guns are designed to be printed vertically; I personally…
Scroll Down for Assembly Instructions Purpose This set of models is the result of testing to help reduce VFA (Vertical Fine Artifacts) coming from the misalignment of the Y axis belt on the MK4. As originally designed, many of the parts…
Update --------- LANKA Overhaul Mods for Leedle's cool Lanka stringer blaster. Thanks for making these files free and remixable. Changes made (shown in the pictures in green color): modified the mag retention to use angled Talon mags…
17.02.23 - Uploaded the STEP for the version I've been running for a while now. Main changes: Now using a bent 3003-H13 aluminum mounting plate instead of the original 3D printed mounting plate. Switched to Orbiter v2. Changed bed…
------Y Motor Mount -Moves motor 1mm to the left. This is to utilize more of the shaft allowing more adjustment. -Moves motor .5mm toward the front of the printer. A very common problem with the stock mount is that the motor binds against…
10/12/2021 update: Added a mount for an accelerometer for input shaping. Updated the Y tensioner to a new, better version with less backlash which now requires an M4 bolt >34mm long. The original bolt from the old tensioner can be reused.…
Would like to thank Okef256 for the original model. It doesn't seem to get much attention, but it is great. Modifications: Modified mount to attach to Ender 5 mount plate instead of linear rails. Added hex holes to allow install with 3mm…
Hi this is my first real project and it was created in Tinkercad so please give feedback and suggestions! I love long pic rails, and carry handles, and I love the Ontos, and that's all there is to it. UPDATE: Added circuitry deco files…
YL-69 case redone for a tighter and stable fit. Please use 2 pcs. 2x6mm screws to mount as shown in the photo. Also added a case for the YL-38 comparator. Needs another 2x6mm screw to fasten. Category: Electronics
TL;DR first: Welcome to my Overhaul of the Creality Ender 2! Im starting here with version V2 (V1 is only in one picture; there was too much wrong with that), which comes in 2 iterations/stages: ++++++++ Stage 1: ++++++++ changing out the…
Anycubic i3 Mega Hotend Overhaul This overhauled hotend housing allows you to see the printhead easily, allows for adequate cooling of the heat sink, hides all of the wires by moving the plugboard behind the x-carriage, and also has a…
If you have an MK4 or 4S, you may need this remix. The Y-motor holder was striking the bottom part of the Y-carriage, so the height was reduced to be the same height as the printer's original Y-motor holder. The Y-belt mount and retainers…
These models include shock absorbers, rear axle, stabilization arm, rear reflectors and all the hinges to fit everything
1/35 replacement for original plastic engine grills. Tested only on Academy 35015 and worked fine
This is a full kinematics overhaul for the Tronxy X5S and X5SA series printers. I have tested all these parts together, and have had clean prints at up to 120mm/s with PETG. It requires 3 mgn12 linear rails, the length of which will…
Hybrid Overhaul for the Vz-330. You will need the SnakeOilXY extended CoreXY module to make this work with Klipper. MUST print in ABS-GF or better plastic!!!! Filled filament is a MUST on this build.
This particular project was done on a Seadoo spark, but I believe Seadoo uses these same mechanisms on other skis. Speed ties… great until they don't retract properly, especially if you have done any speaker modifications where a long…
Useful for power washing, scrubbing, cleaning, and painting the housing without letting any contaminants get inside. Also contains the residual gear oil so it doesn't leak everywhere. Note: The driver's side axle plug fits into the axle…
Adjusted X Carriage to work with Rapido UHF and the HGX Lite V2 Extruder mounting holes.
Requires parts from V3 114mm travel telescope, 450mm version, please support the original OTA mods these sets of parts replace the stock version to move the focuser, viewfinder and phone mount to make ease of use on an equatorial mount or…
260611 Gardena Streuwagen 300-430 (2017) The Gardena 300-430 has a serious flaw ;-( and is basically not repairable. After a couple of years (2-3) the wheels are starting to turn with a heavy resistance until it does not rotate anymore on…
A modified left mount that fits the BLTouch/probe on the inside of the mount. This reduces the distance from the nozzle, decreasing the x/y runoff needed to probe the whole bed. x_offset: -20 y_offset: -17
Adjusted X Carriage to work with Rapido UHF and the HGX Lite V2 Extruder mounting holes.
Update --------- LANKA Overhaul Mods for Leedle's cool Lanka stringer blaster. Thanks for making these files free and remixable. Changes made (shown in the pictures in green color): modified the mag retention to use angled Talon mags…
Anycubic i3 Mega Hotend Overhaul This overhauled hotend housing allows you to see the printhead easily, allows for adequate cooling of the heat sink, hides all of the wires by moving the plugboard behind the x-carriage, and also has a…
A modified left mount that fits the BLTouch/probe on the inside of the mount. This reduces the distance from the nozzle, decreasing the x/y runoff needed to probe the whole bed. x_offset: -20 y_offset: -17
For a 3/8 square drive. Has built in retainer so it won't fully off whilst securing the inner piston. Original manufacturer part number: 7220858 I've printed mine in TPU.
