52 models
So I was looking for a case for an AZ-Delivery CP2102 USB to TTL Converter (https://www.amazon.de/gp/product/B07N2YLH26/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1) and found this model on Thingiverse:…
I have uploaded Revision 2. The first model is the yellow one in the photographs. Revision 2 is the red one in the photographs. It has additional structures to place the oscilloscope probe tools.
Gridfinity 2x2 Slim Clipper Lighter Stand (20 lighters)- Clipper Classic Medium CP 21 Printed well on: no supports 3 walls 5% adaptive cubic Kindly, LIKE if you download
Looking at another ESP32 holder available here, I was thrilled, but then sad when it didnt fit my ESP32. So I made this up instead. My Model is a KeeYees ESP32 Devboard (ESP-WROOM-32 Chip CP2102) Fits like a glove, with a tad bit of room…
Magazin loading help or speed loader for SIG P210
There are lots of project boxes out there. I needed a specific design that requires no screws. I hope you enjoy my little endeavor. It was a lot of fun to design and every time I design something I learn some new ideas on better design!…
3D Printed Enclosure for CP2112 Module Description: A two-part enclosure designed to securely house the CP2112 HID USB to SMBus/I2C master bridge module. The design includes precise cutouts for the USB connector, pin headers. Material:…
A cleat for Ryobi's 18V One+ Leaf Blower (R18XBLW20), that connects to the Ryobi Link system. Also works for P21012VNM. Prints with no supports. Recommended settings: 0.20mm, Quality, PLA, No supports, Infil 15%.
Here are several designs for the USB to UART boards I had lying around. They are pretty quick to print using 0.2 layer, and can be closed with a bit of glue. There are also convenient slots to see the PCB pinout silk screen. Category:…
PLA 0.2 mm layer height 20 % infill Place the PCB between the two parts so that the pins are covered and the board lies on top of the support pillars. Glue the two parts with super glue. If the board slides inside the two parts. Pull on…
Both parts should snap together. I printed mine on 0.2 mm layer height with 0.4 nozzle on Bambulab A1. No supports needed.
Gridfinity box for holding a Nelko P21 Bluetooth Label Printer. It has additional space for up to three Nelko Label Rolls and the included USB cable. Has a nice and snug fit with the rubber band on the side. Measures 167.5x125.5x28mm i.e.…
This is a replacement designed by me in a simple way for the NESCAFÉ® Dolce Gusto® KP2106 to cover the water container. The original lid was missing at the delivery. Printed in Prusament PETG Lipstick Red, 0.2 mm layer height.
Saeco Philips 2200/3300/4400 EP2121 EP2136 EP3146 EP5144 EP2124 Lid. You can find bean extentions but no one modeled the lid. I needed a replacement after mind cracked
I didn't feel comfortable having the circuitry of this little thing out in the open, so I designed a compact, protective, and practical case for it! Features Allows you to easily read the PCB header names Allows you to see the RX, TX, and…
A remix, scaled to 150%. The stand can be found with the link to the original artist.
It works well enough, you need a piece of tape over the button with such a small exit. I included the adapter part incase you need something different. I used organic supports to the bed to make sure it printed. Pretty sure it would have…
This frame was designed for photos printed with the Kodak P210 R Photo Printer and can be placed vertically or horizontally. Photopaper dimesions of this printer are 5.3 x 8.6 cm. The frame is tilted at 7 degrees backward for a better…
This is a design I made in order to make use of the center cubby space. I used to put my phone on the tray above, but I never liked how it moved around in tight turns. Sadly, the cubby's available space can only take one phone, not two…
Standardizing tool organization in my shop with Skadis pegboards from Ikea, and needed a mount for Grandstream GXP2130/GXP2140 phones. Printing with Skadis pegs against the build plate and Cura tree supports created an awful cleanup…
Gone down the deep end on Multiboard? Me too! Check out my collection of Multiboard Models here!
This is a remix of the Raspberry Pi 3 (B+) / 4 sleeve case designed to accommodate a CP-2102 USB to TTL breakout board , offering a small & compact way to fit into a single case. While I created this model to house a Viessmann Optolink…
I got a new Rigol ds1054z scope that came with Rigol PVP2150 probes (the smaller, all black kind), and I needed something to hold the probes in place on circuit boards. I had already printed this very nice probing station designed by…
4x2 Gridfinity organizer that holds the Nelko P21 + several tapes. With Gridfinity Refined base
Enclosure for the CP2102 USB 2.0 to TTL UART Module 5Pin Serial Converter. Print in PETG without supports, 0.2mm layer height, 20% infill... or, you know, whatever works for you.
Mounts that allow CP2102 to micro usb PCB to be screwed into enclosure. Three variants with different mount points (2mm holes) locations. All require usb micro connector to sit in some enclosure hole to be kept stable. Print Settings…
GIMX enables to cross use peripherals with many of gaming platforms. You'll need a dongle like this (atmega32u4) and the computer (Rasberry PI3, PC, ...) with the GIMX SW. More info: gimx.fr Category: Games
This is the FLSun T1 Pro hose and wiring harness guide with the filament hole. This was provided to me directly from FLSun support and I was given permission to upload the file to content sites.
Just a magazine holder for Sig Neuhasen P210.
To construct the case, the battery is placed into the print near the end (at layer 383 when using a 0.2mm layer height), and the print is then resumed, fully encasing the battery. The weight of the print is 6 grams, bringing the combined…
LaskaKit CP2102 programmer case. G-code and 3mf files are made with manual color swap in mind.
Tapo TP200 TP210 camera mount for prusa XL (lasercut 5mm)
Adapted the USB hole for a better fitting, dimension reduced to make it compact. Is adapted for my board antenna plug, maybe you have to make some adjustments due the antennas are not soldered equal. A remix…
Hi Everyone! *8/31/2026 UPDATE Vastly improved down facing mount with wall mount and pole mount option. Pole mount is also compatible with AP27 outdoor AP. I've created some additional mounts for HPE Networking Instant On access points to…
Holder for a Pixel 3 with case to line up the wireless charger element with the Baseus charger. Baseus Charger: http://s.click.aliexpress.com/e/eNnlXkJO Rev-B: Narrowed the outer walls to 2mm from 2.5mm Increased length slightly to give a…
The buckle supports only Acouve-lab VP216. The motor's narrow side pops into the middle round part of the buckle, no additional adhesive or fastening is required. The velcro strap goes through two buckle extensions on the sides. The…
EQ direct USB adapter for Sky-Watcher EQ6 Pro, HEQ5 and similar mount. Wiring diagram and PCB on EasyEDA BOM CP2102 USB 2.0 to TTL UART Module 6Pin Serial Converter or CH340G USB TTL Converter Adapter STC Brush Module RJ45 PCB socket…
Replacement Grandstream GXP2170 Phone Hook. Printed in PLA with no supports.
Holds the Nelko P21 Printer and 4 P21 Rolls. For use with 4x3x3 42MM Gridfinity grid size
I have created a housing for my CC2530 - CP2102 Zigbee2MQTT Coordinator. The case does not need any screws. Just press the two parts together. Wiring: CP2102 - CC2530 GND - GND 3.3V - VCC RX - P03 TX - P02 Print instructions Category:…
This is a simple two-screw wall mount for the Ryobi P21010VNM Leaf Blower. The tool was scanned (using a Creality CR-Scan Ferret SE), and the scan was used as a template for the mount surface. The mount surface is slightly enlarged and…
This is an Aero Pod for the CP215KOA frame. I designed and test-printed it for use on my unibody CP215, but it should also fit the version with separate arms. The pod is designed to fit the following hardware: HS1177 FPV camera with a…
Replacement Grandstream GXP2135 Phone Hook. Printed in PLA with no supports.
Made for this model: https://s.click.aliexpress.com/e/_c3Zf3Ydp This 3D-printed custom enclosure provides a compact, protective and practical housing while keeping all the main functions easily accessible.
Standfuss zur Verbesserung der Standfestigkeit für den Nelko P21 Label Printer. USB Ladebuchse ist freigestellt, sodass man den Fuss zum Laden nicht abnehmen muss. Ordentliche Klemmwirkung halt damit ohne Klebung. PLA 3 mit Perimeter…
I got this Nelko label maker for like $10 at micro center. Modeled out this simple holder to store it on my SKADIS pegboard. It slides in/out easily but the holder is tight enough that it won't fall out. Print settings don't matter too…
Made for this model: https://s.click.aliexpress.com/e/_c40huFmP This 3D-printed custom enclosure provides a compact, protective and practical housing while keeping all the main functions easily accessible.
A quick fan shroud IU made for the Asrock D2143D8UM / Datto S4P2143. There are 2 models included. One is for an 80mm fan, the other is for a 60mm fan. The body of both shrouds is the same, it's just the fan mounting that is different.…
A cleat for Ryobi's 18V One+ Leaf Blower (R18XBLW20), that connects to the Ryobi Link system. Also works for P21012VNM. Prints with no supports. Recommended settings: 0.20mm, Quality, PLA, No supports, Infil 15%.
Tapo TP200 TP210 camera mount for prusa XL (lasercut 5mm)
This Victron SmartShunt enclosure/cover protects against accidental short circuits and physical damage . Designed specifically for the 500A/50mV Victron SmartShunt (Bluetooth, without physical display ) for a snug fit and optimal…
![CP2102 (UART to micro USB) PCB mounts [Fusion 360 source]](https://media.printables.com/media/prints/222928/images/2038321_71f8776e-540d-4539-9e0c-23db02c01860/large_display_cp2102_uart_usb_mount2_222928.jpg)
