Counting matching models…
Print-in-place Lamborghini Countach in 1/50 scale No supports required Reccomended layer height is 0.1 - 0.15 mm I reccommend setting bridges speed to 10mm/s Enjoy!
This is a repalcement channel knob compatible with the MOTOROLA DP4001EX radio. The knob is compsed of 3 pieces the exterior printed in PLA, and the interior printed in PETG. I used the PETG for the interior because is stroger and less…
This is a low profile bracket for a p400 gpu. The mounting screws cut threads into the plastic. Fit is pretty decent. Print with supports as shown. I set the model to be solid throughout (0 infill) to get it as stiff as I could.
Redirect the airflow from your PC's rear exhaust fans upwards and away from the wall. The purpose is to expel hot air in a direction that prevents it from circulating back into the case through the lower slots. Originally designed for the…
Box for Siemens KTP400 HMI panel and proximity card reader. ITEM aluminum profile bracket included. It contains three sets - custom box, back and holder parts. Print instructions výška vrstvy 0.2 mm, výplň 20% GYROID, materiál PETG.
High profile bracket for Nvidia Quadro p400. The mounting screws cut threads into the plastic. First wanted to add nuts, but I don't think it is needed. Embedded cylinders for extra rigidity, it really helps with holding GPU in a place…
First advice-not props. With them, there is a high possibility of tearing off the spoilers, not to mention the need to clean them after printing. Second advice-only PLA. I printed from PETG (I didn't have a black PLA) and the wheels…
Model with true aspect ratios. Ideal for hanging on the wall, all in one piece. 200x3mm. Collect all the CarSilhouette!
A easy to print mount for the Phanteks P400A (might work with other Phanteks cases) No supports needed, use original screws from the case and route the cables from the Fans on the front. disclaimer: might not fit exactly as I made this a…
Print instructions: Printed with PETG. Infill 15-20%. Print the thread and nut without support . For the dust filter I used PVC sheet, 0.45 mm thickness with 1 mm holes , fixed in place with super glue This is an unofficial,…
the foot of my PC Case broke while moving it, so i recreated a replacement. I think it could mirrored to fit the other side.
Build your own 1:50 scale Lamborghini Countach LP400 from a 3D-printed kit card. Print the card without supports, separate the parts from the frame and assemble your miniature Countach. Keep it on your desk, add it to your car collection…
Print two. A hose clamp will hold them together, so the seam only needs glue or tape to seal. Fitting the duct on is very snug. Made with 0.4mm increments in mind for 0.4mm layer heights.
I made an extremely unnecessary upgrade to my Kobra Go PSU to make it quieter at idle and fit a noctua 6025. I'm a Noctua fanboy, and this fan at 12V gives almost the same CFH as the stinky one that was in there already. I just cut the…
Presenting the Countach LP400 Shell, a striking 3D printable model of the legendary Italian supercar, elegantly concealed beneath a dark, flowing cloth. This model is designed to evoke excitement and anticipation, perfect for showcasing…
Lamborghini Miura P400 SV as a 3D Model. This design can be scaled to any size in your slicer. Print flat with ~5% infill to save material. Perfect as decoration. Category: Signs & Logos
Case for Casio FX CP400 calculator with space for felt padding. Simple design with closure, you can open the box by lightly pressing the bottom part and pulling the two parts apart. After the 3mm thick felt is glued in, the calculator can…
Customized version of http://www.thingiverse.com/thing:1264391 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing\_id=1264391 This is a container for the GIPAT P400 foamcutter on Kickastarter. Enjoy and feel…
This model is a cover for the inside of the pc case of the series Phantek P400, P400a and P400i. they may also work on som other versions of phanteks cases, but unknown which. The cover is ment for hiding away some holes that can be used…
These feet raised your Phanteks Eclipse P400 case off the ground, which helps if you have carpet. You'll need two of each model to raise your case off the ground. I printed mine with 3 walls and 20% infill. This might be excessive for the…
The p4000 server chassis came originally with many proprietary attachments to simply slide into the front cage. However, they are no longer produced and hard to find for a reasonable price. These slides are originally made of metal, but…
The power supply that came with my Anycubic Mega SE is one of several variations of the Chengliang P400W24V, a 400W 24V power supply. Because I switched to dual-Z, I wanted to relocate it from it's stock location behind the gantry…
The in-tank "Salva" brand fuel filter of a number of classic Lamborghinis (and possibly Ferraris) is utterly NLA, or in the hundreds of dollars. The sensible thing to do when refurbishing a fuel tank is probably to use a modern push-on…
Hello! This model is for a stand to put your favorite IKEA Samla 22l box on top of your computer case. There is a parametric F360 file so you can make it suit your needs. The parameters for the computer case are marked as favourites in…
This is a replacement plate for Nvidia Quadro P4000, to add a 80mm fan to replace the blower fan. Be sure to use a high static pressure fan, I have used Artic P8 slim pwm pst. This is a 15mm version and perfect for this. Other 25mm…
Presenting the Countach LP400 Shell, a striking 3D printable model of the legendary Italian supercar, elegantly concealed beneath a dark, flowing cloth. This model is designed to evoke excitement and anticipation, perfect for showcasing…
cp400 mount for mp512 sights Windage ajustments from mp512 sight. Elevation ajustments is jank. Just position the sights accordingly. No clicks. But is works. Print on the side with tree supports.
Model with true aspect ratios. Ideal for hanging on the wall, all in one piece. 200x3mm. Collect all the CarSilhouette!
This is a repalcement channel knob compatible with the MOTOROLA DP4001EX radio. The knob is compsed of 3 pieces the exterior printed in PLA, and the interior printed in PETG. I used the PETG for the interior because is stroger and less…
Disclamer. I don't know what i'am doing. Work in progress. "Anatomic" grip for cp400 pistol
cp400 mount for mp512 sights Windage ajustments from mp512 sight. Elevation ajustments is jank. Just position the sights accordingly. No clicks. But is works. Print on the side with tree supports.
120mm Fan shroud for Jonasbo HP400S cooler. I use my motherboard horizontally, pressfit works fine. For vertical mounting you might need to be creative.…
This is a cover to protect the electronics from the up4000 boards, its held by two of the screws that held the heat sink. Just unscrew them, place the cover and screw them back again. I printed it horizontal with support on the base for a…
