758 models
[Update] ---2024/05/10--- Free 3mf file released!! If you want to make multiple prints, use various 3mf for Bambu and Prusa. This is Flexi Japanese Dragon. This model is based on Japanese dragons, especially those of Katsushika Hokusai:…
Print approx. €3.07–€3.76 excl. taxPreliminary estimate for one variant
Update: Prusa XL 5T (4 Color) Multi Material Single Print project file added In my pursuit of a 3D-printable Torii, I faced a common issue – all models out there weren't quite compatible with FDM printing. They required more support…
Print approx. €0.35–€0.42 excl. taxPreliminary estimate for one variant
This box is inspired by Japanese locking lid tool boxes. This is an ingenious locking mechanism and it is simple yet elegant. Your fitment may vary. Depending on 3D model settings and different filaments, you may have to slightly adjust…
Print approx. €6.82–€8.34 excl. taxPreliminary estimate for PETGSource material: PET
A Japanese shrine gate made for mothers day. Can be used as desk ornament or, if your like my mom, in the garden. Simple glue construction makes it an easy to make multi-color and print without supports. -Scalable -Easy to construct…
Print approx. €0.62–€0.76 excl. taxPreliminary estimate for one variant
Update #1 I fixed the hooked top, so now the small sticks snap in properly, and I added a "candy" looking side panel. If the tolerance of the printer is not accurate enough, cut 0.2 mm from the top of the side panels. On the other hand,…
Print approx. €1.22–€1.49 excl. taxPreliminary estimate for one variant
Legal Note: Ghost of Tsushima is of course copyright of Sucker Punch Productions all rights reserved. I was inspired to create my own version of a Japanese garden lantern after playing the brilliant game Ghost of Tsushima, I came across a…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
I experimented to find a decent solution to keep my Japanese saws on my french cleat wall, and the result is this holder. The saw coils when it is put up into the holder from the bottom. But because the holder itself hangs freely on the…
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for PETGSource material: PET
Giving full credit to the original design - this is a remix of this lantern - Japanese Garden Lantern Lamp by Keenan - Thingiverse I printed everything at .15 layer height. I did supports only on the middle section on the openings for the…
Print approx. €8.99–€10.99 excl. taxPreliminary estimate for one variant
Japanese Torii (Bonsai Decoration) 90mm x 120mm x 7mm the small panel is held together with double-sided tape Files : Japanese_Torii_Top.stl Japanese_Torii_Middle.stl Japanese_Torii_Foot.stl (To plant or to place) Japanese_Torii_Panel.stl…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
This is a small jig to make square cuts using a japanese hand saw. After printing you can just pop the magnets into the holes. I used 8x3 mm neodym magnets like these: https://www.amazon.de/gp/product/B007KZGADE. They give great support…
Print approx. €1.41–€1.73 excl. taxPreliminary estimate for one variant
Regular hexagonal coaster from Thingiverse (by YewShmz) with traditional Japanese pattern called "Asa-no-ha(麻の葉)".
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant
The Kabura-ya Kabura-ya (鏑矢, lit. 'turnip[-headed] arrow') is a type of Japanese arrow used by the samurai class of feudal Japan. Kabura-ya were arrows which whistled when shot and were used in ritual archery exchanges before formal…
Print approx. €2.72–€3.32 excl. taxPreliminary estimate for one variant
The third in the Japanese Elemental Oni series - see also InfernOni , TyphoOni , Little Sakura , Little Coral , Little Bramble Wear it or display it! Meet the OniKaze (OH-nee KAH-zay), fearsome spirit of the wind. Version from the photos…
Print approx. €2.99–€3.66 excl. taxPreliminary estimate for one variant
Japanese Temple Guardian
Print approx. €11.12–€13.59 excl. taxPreliminary estimate for one variant
I really appreciate you if you can consider a coffee for me if you like the design! Update - Jul 18, 2023 Adding tight tolerance STEP and STL files for the templates which has 0.05mm distance. The regular tolerance has 0.1mm distance…
Print approx. €3.36–€4.11 excl. taxPreliminary estimate for PETGSource material: PET
From time to time, my Apple Watch was knocked off the charging cable by accident causing it to not completing charging. It was quite annoying as the watch would be left useless without proper charging. Hence, an Apple Watch stand is…
Print approx. €5.47–€6.69 excl. taxPreliminary estimate for one variant
A simple yet elegant fan, inspired by the Japanese handcrafted fan (Uchiwa), or non-folding fan. With just a few grams of filament, you can create a striking piece that also perfectly fulfills its function. The images above were printed…
Print approx. €1.19–€1.45 excl. taxPreliminary estimate for one variant
You need to print 6 pieces : Plank A x 4 Plank B x 1 Plank C x 1 You will need some patience and dexterity to success this one ! Here is the link for the solution (on this fantastic french website about “Casse-tête”) :…
Print approx. €3.51–€4.29 excl. taxPreliminary estimate for one variant
Japanese hand saws are sometimes very expensive tools and require a certain amount of care when stored. The usual Japanese way of storing them in a fabric roll-up bag is very gentle and practical for travelling, but if like me, you only…
Print approx. €7.76–€9.48 excl. taxPreliminary estimate for PETGSource material: PET
Construction Manual First of all. This is inspired by Chris awesome Mondrian Table Lamp heavily. Therefore I mark this as a remake. He uses 3D printing all the way. As I don't have that many filament colors, my design uses a quite common…
Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant
9g of filament and less than an hour to print a fully functional and attractive fan. Printed in Prusa PLA, with a 0.40mm nozzle and 0.28mm layer height. Reducing the initial layer speed helps improve layer quality, simulating the look and…
Print approx. €30.06–€36.73 excl. taxPreliminary estimate for one variant
Introducing our collection of adorable Japanese-style floating toys! Perfect for bath time fun or adding a relaxing aesthetic to any indoor water feature. Our Songoku toy is based on the legendary monkey king character from Chinese…
Print approx. €8.17–€9.98 excl. taxPreliminary estimate for one variant
Formado en dos partes, el cuadro y las tres flores. El cuadro se imprime en dos colores manejando las capas de impresión. Cada “tallo” de flor tiene una pequeña superficie en donde se puede pegar la flor con pegamento fuerte.
Print approx. €1.02–€1.25 excl. taxPreliminary estimate for one variant
Vitavia Target 2500/3800/5000 greenhouse panes holders. Item No. 1301, 1302, 1303. The original broke after 5 years.
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
Draw Cute Kaomoji Anywhere! Introducing eight credit card-sized templates featuring different emotions. Slim Design : Each card is only 0.6 mm thick for economical printing and easy stacking. Quick Print : Print all eight cards in less…
Print approx. €1.45–€1.77 excl. taxPreliminary estimate for one variant
Japanese Wave Style box fit for a few make-up palettes. Or anything else that fits in the box. Used 2 models as inspiration: https://www.printables.com/model/477191-assembled-tissue-box-with-japanese-pattern-with-sp…
Print approx. €4.17–€5.09 excl. taxPreliminary estimate for one variant
This design was created by @ravi72munde. For instructions look here: I printed it at 100%, and it worked quite well. Some light sanding was required to ensure a proper fit of the "lock base" and the "lock base lid" inside the box. In my…
Print approx. €0.99–€1.21 excl. taxPreliminary estimate for one variant
INFO Inspired by this model: https://www.printables.com/model/222261-japanese-tea-ocha-coaster I decided to use the word chopstick in Japanese (Hashi “箸”) for the chopstick holder. PRINT Can be printed with solid color, or with color…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
When you want to attach a Furin (Japanese wind bell) on a window or a door. It can be quickly printed and then you can stick it by some double sided tape.
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant
My collection of Japanese vases. The creation was intended for my wife, who loves Japan and its architecture. Each vase is for its own place. Printing with PETG Prusament Galaxy Black 3 layers 0.2 line 10% grid fill Random seam…
Print approx. €2.53–€3.09 excl. taxPreliminary estimate for PETGSource material: PET
Simple two part variant of japanese INRO to store your trinkets. Mine holds spare key, USB key, Yubi, several microSDs, nailclipper, firesteel, olight I3T torch and small ball pen, since I tend to forget them regularly.
Print approx. €0.91–€1.12 excl. taxPreliminary estimate for PETGSource material: PET
This idea is coming from 💮 emoji, in which the Japanese text 「たいへんよくできました」, means “You have done it well”, or “You aced it”. This is the “Hanamaru”, or “Flower Circle” version of it. This symbol is used in Japanese schools on a exam…
Print approx. €2.28–€2.79 excl. taxPreliminary estimate for one variant
Hello, Today I have Japanese scythes, sickles for you. They are ideal for opening boxes, or perhaps as an accessory for cosplay. They are not sharp! They are not dangerous. You have 2 models from me, one is whole and the other is in 2…
Print approx. €2.27–€2.77 excl. taxPreliminary estimate for one variant
Školní pomůcka pro truhlářské a tesařské obory. Model po složení stojí sám. Vhodný pro Odborné a technické kreslení a matematiku. Vhodné tisknout různobarevně. School aid for carpentry and carpentry. The model stands alone after assembly.…
Print approx. €4.70–€5.74 excl. taxPreliminary estimate for one variant
It is a button that can be flexibly combined on the front and back with a screw structure. I placed cloisonne and arabesque, which are traditional Japanese patterns. I added button1 in same design with different shape. Top and bottom…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
The panes in our porch light sconces deteriorated with age. This is a simple replacement. They are printed in ABS to withstand the elements and thin enough to let the light through. The pyramid shaped dome is my idea to discourage the…
Print approx. €2.77–€3.39 excl. taxPreliminary estimate for one variant
Japanese Wave Style box fit for pens, pencils, markers, or anything else that fits in the box. Assembled size: 95mm X 80mm X 95mm Printed on a 0.4mm nozzle @ 0.1mm (because anything larger than that does not look good, in my opinion).…
Print approx. €4.38–€5.35 excl. taxPreliminary estimate for one variant
A stupid joke print based on a stupid joke based on some failed gatekeeping in /r/xbiking. "French Talisman" in Japanese (at least according to Google Translate) Print file includes a pause for color change at 1mm height.
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for one variant
Japanese Armored Turtle Netsuke
Print approx. €3.47–€4.25 excl. taxPreliminary estimate for one variant
stackable storage box with japanese influence update · added STLs photos show printed in matte black pla and brick red petg-cf 0.16mm layer height 20% adaptive cubic infill no brims or supports the top section (in brick red) has different…
Three piece lantern printable without support, the pieces snap together. Designed as a corded lamp, a candelabra base (E12) socket with metal clip snaps into the base, a standardized part which is readily available online. Multiple sizes,…
stackable storage box with japanese influence #2 update · added the STLs, including 2 new grid options (grid 2 and grid 4) photos show printed in matte black pla and brick red petg-cf 0.16mm layer height 20% adaptive cubic infill no brims…
Japanese pattern bookmark (5 patterns + STARWARS pattern) Recommended settings are : X:30mm Y:60mm Z:1mm ＜In order from the top left＞ ・Asanoha Pattern ( Nezuko Pattern from Demon slayer ) → It contains the wish for the healthy growth of…
A Japanese castle inspired tower to roll your ttrpg role playing dice. 4 seperate pieces, pre-supported, pre-painted .3MF files. The bottom 3 pieces fit together snug, the top roof piece is looser so to be removed for larger dice,…
Supports required for the bushes and roof. Great detail and easy to remove supports. "Tree supports on build plate only" Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
This is my personal take on a traditional Japanese Oni mask — reimagined with a modern, stylized edge. The fierce expression, sharp horns, and aggressive curves were all sculpted to bring out that intense, demonic presence. Whether you're…
It is ergonomic thimble (finger guard) It fits finger rather well, as it is not round in cross-section (similarly to most fingers) It has: -dimples -concave top to push needles -ring guarding somewhat from slippped needle injuries -ribs…
Enjoy this nice japan pattern
Ever since I learned about kit cards I wanted to make one of my own. I tried to fuse my love of traditional Japanese woodwork and joinery with the art of 3D printing and create a relatively flat kit that allows you to build and snap…
Supports required for the roof. Great detail and easy to remove supports. "Tree supports on build plate only" Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
I made it in the image of a traditional Japanese lantern. Necessary items in addition to 3D printer products A 60*120 piece of paper “ precisely " cut from A4 paper LED tape light Power supply Please refer to the image for how to…
Check out a new puzzle box here Inspired by a random Reddit post, I designed this from scratch. There was no reference so it's mostly trial and error with additional locks. Please make sure to split the file into parts in your slicer, not…
Bring the power of Japanese folklore to life with this Japanese Oni Mask . Inspired by traditional demon masks, this detailed model features sharp tusks, fierce eyes, and intricate ornamental patterns that make it a striking display piece…
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 Custom display base are also available from $5! Contact me to discuss what you want! If you…
Supports required for the roof. Great detail and easy to remove supports. "Tree supports on build plate only" Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Hey everyone! Exciting news – we've just launched the AnkerMake Model Platform. Here, you can access models designed by AnkerMake users themselves, as well as our latest official designs. What's more, we're currently running a model…
This is a Lantern with swappable panels inspired by the Japanese Garden theme. The panels can be swapped for many themes : Disney, Valentines Day, Christmas, Halloween, Easter, Thanksgiving, etc. Making this a year long ever changing…
Torii Gate - Japanese Wall Art
IJN Japanese Battleship Yamato from World of Warships. Best printed at a length of 180-200mm Infill: 8 Supports: No Walls: 2 This is a stylized model by Subhunter59 and is for free use.
Japanese castle model made heavily referencing Matsumoto Castle and Himeji Castle. I chose to only model the keep as this project already took longer than expected. The model is 140mm tall and uses about 200g of filament if printed with 3…
At the entrance of many sacred Japanese shrines, gardens, etc are these Komainu “Lion Dog” statues--usually in pairs, on either side of the entryway. I took about 100 photos of this komainu at the Portland Japanese Garden, and then used a…
🇯🇵 日本へようこそ! Welcome to Japan! This was modeled by Dany Sánchez . This easy 3D print represents a typical Japanese 5-story pagoda used to store several buddhist relics, similar to the ones seen in the Hōkan-ji Temple in Kyōto, or the…
A 4-part Japanese Torii gate General: 0,2mm layer height Printer using PLA Black and Red colour Sizes: 3 pre-generated sized available to download. Main dimensions table below: Height [mm] Width[mm] Small 73 110 Medium 117 177 Large 161…
Sculpture of a japanese mythological creature - kitsune, nine-tailed fox). Designed to print without supports! Print instructions Should print without supports if your printer can do short distance bridging. The gcode works on Prusa MK3…
You will need to print six panel parts. Each part was printed with a 5% infill with a .2mm layer height, at 50mm/s. Tree supports were used while printing the top part. You can use any standard tealight or rgb tealight with this model.
Has your desk or Zen Garden ever been missing a Japanese castle for decoration? No more! This is not any castle in particular but meant to be a decoration featuring elements common in many Japanese castles. The model is scaled to be small…
Design Concept The design is inspired by traditional Japanese Oni masks, featuring intricate patterns and fierce expressions to capture the essence of the mythical demon. Purpose This half face mask can be used for cosplay events,…
This is a remix of Keenan's great lantern model. I separated the the cross hatch panels in order to get a cleaner print. Otherwise the model is the same. If you want the model with the socket, download the base from the original.
I really loved the design of this lamp. So I started making this model with my own personal touch. I especially wanted to add a flame effect on the entire height of the lamp. So I searched on the net to find a lamp led flame effect that I…
These Japanese styled lanterns were designed as centerpieces & table numbers for a friend’s wedding. Battery powered fairy lights were placed in each lantern to illuminate them for the event. 16 centerpieces consisting of 96 individual…
Following a request for more benches! This is a unique twist on the usual benchy. Like, download, and comment below if you want to see more models like this!
Description This 3D-printed tōrō lantern model is inspired by traditional Japanese stone lanterns, commonly seen in gardens and temple pathways. Its design is characterized by a pagoda-like structure with a sturdy base, geometric lines,…
_______________________________________________________________________________________________________ ☀ If you want to sell prints of this model, as well as all of my models, future and past , become a member of my Patreon for a…
Japanese Lantern A Japanese lantern based on the design of ProgressTH, however an improvement to his original design since this does not require glue and you do not have to hold the pieces awkwardly to assemble the lantern. The lantern…
A 1:64 scale miniature hot wheels diorama of a Japanese store. Files are separated for better printing with different filaments.
Japanese Pagode Light. Use only low wattage and low heat output bulb. LED prefered. DO NOT USE WAXCANDLES!!! Use a commercially available lamp socket. Holder for socket to make yourself or pass on dimensions via a personal request. I'll…
A Japanese Berserk logo for a multicolor print
A tanto knife with a removable sheathe and customizable scales. I positioned it standing straight when I printed it to minimize supports on the blade spine. The print will have better results at slower print speeds for less wobble near…
A modern version of a Japanese table lamp. Designed use a clip in light bulb socket (E12). Hardware needed to build 4x M3x15mm socket cap screws 12x 3x8mm pins 1x clip-in-light socket such as,…
Four little Japanese garden miniatures. I initially made these to submit in the 2023 Chopstick Holder contest [here] , but missed it by a few hours. Thought I'd post them anyways :P My printer gave me some difficulty with the tiny…
Simple lantern base to hold LED tea lights, made to fit the paper lantern patterns made by Wise_Man . In addition to the lantern base you will need: 4x printed sides of your preferred pattern from the original model LED tea light (max…
Data for three-color printing by A1. It is a little small in terms of work size for adults to wear. The 3mf files are for BambuStudio's A1 printer. If you want to print on other printers, open the 3mf file in BambuStudio. If you want to…
Add a sleek and minimalist touch to your decor with our line art wall decoration, featuring a classic Japanese car. This piece highlights the iconic design and smooth lines characteristic of Japanese automotive craftsmanship. It's a…
This lantern is a unique creation that can be assembled without the need for any adhesive and can also be easily disassembled. The primary objective of this project was to provide enthusiasts with the opportunity to incorporate their own…
Buy the full version on Cults3D! Visit my store for paid models! https://cults3d.com/@1xmerch Explore the iconic skyline of Tokyo with this meticulously crafted 3D model, designed for seamless 3D printing. This urban landscape captures…
Supports required for roof. Great detail and easy to remove supports. "Tree supports on build plate only" Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
This 3D printable piece features identical geometry on both sides and is designed to be printed twice using model 'A.' Whether used as a standalone piece or incorporated into your projects, it delivers exceptionally satisfying and…
Made the temple base one solid object for easier printing, added some decorations to the sides, a sun image in the centre and a small step at the front. This can now be scaled up or down as required and printed without supports or rafts.…
A case to organise your loose 10, 50, 100 and 500 Japanese Yen coins. It holds up to five (5) of each denominations. Any loose 1 and 5 yen coins can possibly be stored in the slot between the 10 and 50 yen coins. Decided to remix the…
Can you solve this 3d puzzle? It consists of 51 parts. In original size each cube has an edge length of 2 cm (little smaller because of some tolerance), so the whole puzzle is 22 cm long in every direction. Difficulty: Medium Print…
This is a remix of NilsDougan's very cool coaster laser cutting patterns (thing:2821011) adapted to work with FDM printers. The STL is scaled to 4in (101.6mm) sq by 2mm thick. Print instructions 0.2mm 50% infill Avoid standard PLA if…
This beautifully crafted, Japanese-inspired uchiwa hand fan is a perfect blend of tradition and modern innovation. Designed with the elegance of classic Japanese art in mind, the fan serves both as a functional tool to keep you cool and…
This model is for personal use only. Do not sell this model or prints of this model. For licensing this model to print and sell, shoot me an email at [email protected] If you make this and post it on social media, state it was made…
Supports required for the roof. Great detail and easy to remove supports. "Tree supports on build plate only" Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Japanese Settlement and City pieces for Catan. I did not make a Japanese road part preferring to use the ones already available on Printables.
resolution : 0.2mm infill : 20%
A keychain with japanese Honda text.
I recently used a knurling inspired by a traditional Japanese pattern called bishamon kikko and thought that the pattern resembles interwoven hexagons and could be printed as a ‘fabric’ I haven't seen before. So I ended up doing that……
Hello everyone, I’m P1lotz , a professional 3D artist from Scandinavia, and I have been working in this field since 2019. This time, I have chosen to design a Japanese-inspired dragon! The body moves freely around ✓ The legs move up and…
