Counting matching models…
[ New version of the bookmark piece , see update below] This bookmark comes in the shape of a cute little cat peeking over the book's top side. It is a remix of YahooJAPAN's cat: https://www.thingiverse.com/thing:182091 . The assembly is…
If you like this model, please follow my profile - it will help me a lot 😎 TwinJet Speedboat is a lightweight, balloon-powered water toy designed for quick, repeatable launches. The first two gallery images are visualizations created…
Self draining scrub daddy holder. Printed with 15% infill and supports to baseplate.
I needed a calibration model to verify my maximum print speed without sacrificing too much quality. Made a quick one and it works pretty fine in my opinion... Basically it is a cube with chamfers, sharp corners, a hemisphere and…
Test de velocidad con la forma del circuito de Montmeló para que podáis poner a prueba vuestras máquinas. La idea es ver a qué velocidad empieza a mostrar peores resultados nuestras máquinas. IMPORTANTE: Es importante que conozcas tu…
I remixed a wall mount for Lego Speed Champions sets, as the original design had two separate wall mounts for a single set. I joined two together, ensuring they were the precise width required for accommodating any Lego Speed Champions…
The Revolver Born from a particularly frustrating weekend of printer maintenance, tinkering and DIY I bring you “The Revolver”. A fully 3d printed screwdriver for ¼" Hex Bits What started out as a fun weekend, slowly spiralled into…
We love the Star Wars Kit Cards by benzz88 Edabot Nakozen and delman83 After designing the millennium falcon and tie interceptor kit cards, a coworker suggested I try a landspeeder. This was made to fit together when printed on my…
UPDATE 5/17/20 I have completed 2,3,4 of the updates i thought would be good. If someone could please**try it and let me know how it works with the bottom ribs I would be forever in your debt I have printed several of the speedloaders on…
UPDATE: The main spacers were missing from the file list and have now been added. The hole in the hand crank has been adjusted to fit the input shaft. This is my rendition of a “constant mesh” 4 speed manual transmission gearbox. A…
It seems most printer knobs are either good at precision/comfort, or they are good at speedy rotation, not both. This knob upgrade truly has the “Best of Both Worlds”, precision using an aesthetically pleasing, traditional “knurled knob”…
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
Meet the AirFlow Spinner , a tiny print-in-place fidget toy designed to spin fast and smoothly straight off the print bed. Its slotted wings reduce air resistance and create that “high-speed air intake” look, making it feel quick, light,…
Recommended support for the head and legs
This easy-to-print model is for a silhouette of a Peering Cat with 3 different models for various display techniques that requires no print supports. The Silhouette can be placed on a shelf, placed in a window, screwed to the top of a…
This is a wall mount designed for LEGO F1 Speed Champions sets. The most popular commercially available mount for these sets (which this model was inspired by) requires the use of screws, which is not always an option for renters or if…
Note from comments: The speedboat challenge is done with the original benchy. The text is meant to be at the bottom and is part of the challenge. Any runs posted without the bottom text or other changes to the model are disqualified. The…
🐇🌷🥚🐣 Springtime is synonymous with Easter and PEEPS! These delightful Marshmallow Bunnies have been a beloved treat for nearly seven decades and a vibrant addition to Easter baskets worldwide. Who took a bite out of my Bunny?! Check out…
A fun bookmark of a cat peeking over the pages. Also an easy multicolor print. This is a remix of https://www.thingiverse.com/thing:3984712 — I made the clip a bit longer and sturdier, and adjusted the cat's face a bit to make it easier…
This is a 3d printable AK magazine speed loader for AK magazines in 7,62 and 5,45. It was inspired by the podavach U-Loader with the goal to make it 3d printable on a standard 3d printer. It gives you the ability to load AK mags at least…
Attention! If you have a Prusa XL, you'll want to check out my new loader that mounts to the frame and is always at the ready: Also, be sure to check out the remixes for some great optional parts! No XL? How about Core One INDX? About…
This is an easy-to-print flat model of a cat peeking out from behind an object. Works best if put in a window. Update 2025-07-20 - Colored Eyes I added a version with the eyes filled in on the middle layers, providing the capability to…
This is a 3D printing speed test. It consists of two 3D models, optimized for testing speed and acceleration of the perimeters and the infill respectively. You can use these to tweak your speed and acceleration settings and look for…
Hi! This is another Electric speed loader for Airsoft. This is the basic version. You can also get the upgrade package here: https://cults3d.com/en/3d-model/game/airsoft-electric-speed-loader-upgrade-package-to-advanced-version It counts…
Updates: 2/23/2021 - NEW v2 MODEL! Increases overhang length, makes the cones more pointy, adds support to the microcylinder on the left so it does not wobble and cause false testing, and also adding some other new windows and holes. Also…
A blatant knockoff of Lee Valley's Veritas Pocket Squares (imperial and metric). See https://www.leevalley.com / for the real thing. The tops are chopped off (for ease of printing) so they are actually 1 tick short (ie the 1½" square is…
Object description: This wire stripper is as the title says, a tool which cuts in the outer insulation of a cable that you can easily peel it off. I made the experience that a lot of professional tools work with a spring mechanism and cut…
You can show off your love for Peeps and add some Easter flair to your hoodie drawstrings! They make a perfect gift for your co-workers! Print a pair in every color! Print one pair in 30 minutes and uses under 5 grams of filament! They…
3 spline locking joints Fully 3d printed. Locking taps built in to hold the pad in holder. Will be a snug fit. Recommend Slicing Tolerance set to Exclusive. Frame mount>Arm 1>Arm 2>Pad Holder I would recommend supports on the pad holder,…
Object Description: Orange peeler. Using the front side, cut the peel into several pieces. Lift it with the flat end of the peeler and remove the pieces. If you need a version with a lower cutting depth or any other modification, don't…
Original: Updates: 2/23/2021 - NEW v2 MODEL! Increases overhang length, makes the cones more pointy, adds support to the microcylinder on the left so it does not wobble and cause false testing, and also adding some other new windows and…
Hi, I'm an amateur “bastlíř”. I'm the proud owner of a 3d printer i3 MK3S+ and I want to find out the limits of this printer and how else than 3dbenches. I want to share this experience with you. For each version I always write its pros…
Speed Test v2 Testing your printspeed !!and change the acceleration for more speed!!
This has been remixed from https://www.thingiverse.com/thing:1615502 and turned into a picture frame. Parts Needed (4) M3*8 screws Print Settings Supports suggested for the opening of the photo. Layer height of 0.20 mm or smaller. 10%…
This is a wall-mounting bracket to be used with the smaller F1 Speed Champions Lego sets. It can be printed without supports (big, flat side down) and features a 4mm countersunk hole for attaching. Print pictured used the following…
V1.4, 16. Aug. 2024: Minor changes to the simple base Minor changes to the display V1.3, 20. Dec. 2023: Simple base added V1.2, 19. Dec. 2023: Shorter lever rods Shorter lever handles Panel added V1.0, 17. Dec. 2023: first release I…
I printed the STL "original" with an Ultimaker 3 Extended in PETG/PLA. You can print the STL "optimized4print" easyer without PVA.
Remixed from the excellent source model - thank you FW_3D for uploading the .step files 🙏 Differences from the original: Added clearance for rounds Added captive guides to the pusher to keep it engaged Rotated viewing slots to allow…
If you read this, please leave a ❤! An adapter I made to I can more easily reload my airsoft pistol mags. Printed in PETG. The short version sticks out less but requires a little extra finesse with gloves on. Edit 11/29/2023 V2:…
Glock 9mm double stack magazine speed loader - 2 Versions. One has more rounded sides on the top end. I printed these with 100% infill and they are very sturdy. These have less slack around the magazine than some of the other models I…
Are you stuck idling when you'd rather be driving? This pocket-sized six-speed gear box fidget may help. Feel free to make vroom-vroom noises as you lace through the gears. The gear graphic on the back identifies you as a proper gearhead.…
**Updated 9/23/2022: pants.stl reloaded with the flat side down** Speedy Gonzales, a cartoon character in the Looney Tunes and Merrie Melodies series of short films produced by Warner Bros. He is portrayed as "The Fastest Mouse in all…
This print is to test ones printers capabilities to print at ever-increasing speed print speeds from 40 mm/s to 220 mm/s in 5 mm steps using print modifiers.
Airsoft speedloader m4/ar15 You need: 1 m3x20mm 6 m3x10mm 6 m3x10-20mm 1 m6x20 1 m6mm nut 1 half pen spring Printed with: 0.4mm nozzle, 3 Walls, 15% infill and 0.16 layer height. Message me if the tolerances is too tight for your printer.
Model updated! Please download new 3MFs The 3MFs re-uploaded on April 12, 2026 should now work in FS >0.9.3 and print more cleanly. Summary A reduced-palette design based on the experience of jusdisgi on Maker World and me which we…
Hello, this is my first model I have designed and it is a way to hang the LEGO Speed Champions on the Wall removing the clutter from my TV Stand. I designed it using a hole large enough for a screw and to be attached using a drywall…
This is just an improved Printer Profile and Print Settings for the Kobra S1 that increases printing speeds significantly, while not loosing out on quality. I have increased the max speeds for the motion limits of the printer as well as…
FORTNITE PEELY, NOW IN DUMMY 13 FLAVOR! Wanted a poseable Peely so made a very lazy remix of a Peely model to incorporate Dummy 13 connections for the arms and legs. I could have done it a bit better, debated recessing the arm connections…
this is an upgrade to a very nice display holder that i use these build extends the original design and offer a different display mount because i wanted something slimmer that wont engulf the hole screen. this model is fully incorporated…
Use this in combination with the speedbump riser that you can download here: https://www.printables.com/model/536359-creality-k1-riser-the-speedbump-closed-and-ventila Printed in ABS supports are needed and you can use the standard bolt…
Riser that makes room for the canbus chain to move in a safe way instead of bunching up in the corner with the chance it unlocks the extruder (it happend twice) Both ventilated and closed models for download Supports are needed for all…
Join me as I design, 3D print, and assemble a custom RC boat powered by a high-performance brushless DC motor! In this video, I walk you through the entire process—from CAD modeling the sleek hull to 3D printing the parts, installing the…
Was looking for speed loaders with a better one handed grip and decided to make one for 9mm and 45 ACP Print Settings Printer Brand: MakerBot Printer: MakerBot Replicator 2 Rafts: No Supports: Yes Resolution: 0.2 Infill: 100% Filament:…
I re-mixed the Lego Speed Champions Car Lift model to better accommodate the pre-2020 cars that are 6 studs wide (the newer cars are 8 studs wide and will not work unless you scale up the model.) I also redesigned the floor to reduce…
This is my first attempt at an articulating dragon model. It is designed for printing on dual extruder printers. once printed it measures about 23 inches long but can fit on print beds as small as 150mm X 200mm. If you like this model…
This is a simple box for blister plasters from Compeed or other manufacturers. The hinge is designed to get a piece of 1.75mm filament to hold the box and the lid together. Print it with your default settings for your filament type you're…
The stand should fit the majority of the 8 wide speed champ cars. It's just wide enough to fit the McLaren Solus GT on the bottom and the Merc F1 is too long for the top to give you an idea for scale. The tabs on the ‘Car stacker plate’…
A very easy-to-build Airspeed Indicator for flight simulation. It comes in two different versions: either articulation by an SG-90 micro servo or with a 28BYJ-48 stepper motor (recommended). UPDATE 2024-12-21: Fusion 360 Source added…
Peep sight rotation can be very annoying and time consuming to fix. One solution is to twist the bow string to perfectly align peep but it requires to have a bow press. One other, fast and easy solution is to use this little tool, that…
“Never miss a beat (or a bathroom break)!” “Mix & Relief – Spin tracks, not your bladder!” “The Bathroom Line is longer than your setlist!” 🎧 The Problem: Every DJ has been there. You’re in the middle of an electrifying set, the crowd is…
My version of a high speed curve for Gravitrax, with a separate connector on the bottom that you can glue in. This makes it more easy to print. I added the Fusion 360 file if you want to use it as a base for your own creations. Category:…
How it works: https://vimeo.com/544208321 This is the 6 version of my speedloader. It has many new features: the cartridges does not fall out when the magazine is not inserted it is suitable for smaller printers there is the possibility…
Speed square size 16 cm (can be printed on Prusa Mini). It is possible to print flat (when I tried to print another speed square in portrait, it was not completely rectangular).
As a follow-up on my temperature-tower and Acceleration-tower for Bambu Studio, I created this Speed-tower. Its width is designed to fit in a 1x2 gridfinity basket. First model is a test from 40mms to 220ms. Second model is from 160mms to…
easy print, just slice and print!
Settings see pictures, all other settings to default. Thanks for downloading in advance and please don't forget to like this modell!
Update 26-11-2025 Added a new version for testing angle variables between 25 and 70 degrees. Remix user @MarioL_3d_designer This is my remix both models: Ultimate Fan Speed Test and Cooling direction test. Stronger pillars, supported to…
In this type of gearbox, all the gears of the main shaft are in constant mesh with the corresponding gears of the countershaft. Two sliding dog clutches are provided on the main shaft. Gear ratios: 1.38, 1.00, 0.78, reverse 1.86 and…
this is a v2 for my previous design Flsun v400 Speeder Pad Display Holder Upgrade after v1 these are the new features to the new design: more robust holding less material better cooling : spacers in the back of the screen more air way…
Lego Speed Champions Stand for post 2020 models. This is a remix of a great model created by RobC. You need to take pillars and other parts from the original model and my remixed platform.…
A nice model to display some Lego cars! No supports needed and can be done in under two hours. For Speed Champions cars a 4x6 plate is attached to the bottom (see photos). I also recommend some glue between the 3d printed part and the…
We're huge fans of the LEGO Speed Champions series over at casadebricks.com With so many great cars, we started to run out of space to display them so built these stand options. Simply print at 20% infill with 4 perimeters and then push…
Peeps Bunny figure! They're silly, cute, and won't rot your teeth! And you can stand them up and use them as dominoes! :) Updated 3/26/2024: Uploaded 3mf file with appropriate layer change for color. Happy printing & Hoppy Easter!
It's a rupee I made in fusion 360, print in your favourite color and post a make! It only takes ~20-30 minutes
An articulated Peely based on Fortnite that has movable legs and arms and can hold on to his pickaxe. This toy is intended to be seated and has not been designed to stand on its own. This toy is print in place but you will need to turn on…
This is your basic speed square with metric markings on both sides. A speed square is essential for most wood working projects. It is also very useful for a lot of other projects. If your printer is properly calibrated the square will…
Here's a video of it in action! https://youtu.be/EtTMcURcMaU A boat that you can use to propel itself using a balloon. The entry on the top of the boat fits a standard balloon but should be ziptied for best use You can also scale the…
This is a rupee from the legend of zelda.
This is remix of peeking cat bookmark https://www.printables.com/model/346623-peeking-cat-bookmark-3d I made it one pice and stronger (thicker). Also made it flat (I cut cats head a little bit from back). Now you can use it with smaller…
Internal recirculation air filtration duct for AD5X. This model use the same 24V 5015 fan/blower model as the one found on the toolhead with 4 wires. This allows PWM capability and interchangeability. The mod help reduce fumes and…
Modified from an existing design, fits with a 5mm x 3mm circular magnet. Glue needed by the way if you want the magnet to not fall off whenever you take finger rest off, since I made the hole to be 5.5mm wide. If you'd like it to fit with…
This speed loader is designed to load Sig P365 magazines. The Sig P365 magazine in particular can be difficult to load. I noticed my wife was having a hard time loading her magazines so I designed this for her. Needs to be printed with…
Do you like interesting car models, especially F1, from the LEGO Speed Champions series? Give them a representative space in the frames on the wall. The available IKEA Sannahed 25 × 25 cm frames are ideal. First, print a test piece on…
Print however you want to, my settings were pla .4mm nozzle with .15 layer height. The circular hole is designed to accept a 6mmx2mm magnet glued in place(there is a magnet in the mouse so really any small piece of metal glued there…
Hello, Today I have a 5-speed training gearshift for you. It is great for practicing manual gearshifting in a car. It prints several parts, there are also files for multi-color printing. For proper functionality, you need to use a Print…
Here is the lovable Easter Peep. I used Sainsmart pastel TPU. They have fuzzy skin with 5% infill (very flexible). I have included the g-code for the Prusa MK3S+. Have fun.
These are 45 degree angled mounting platforms to display your 8 stud wide LEGO Speed Champions, the mounting plate hooks into the chassis pieces with 4 studs, I made a modified version for the 1970 Ferrari 512M, see the 4stud file for…
A sleek, minimalist 3D printed display stand for the LEGO® Speed Champions DeLorean. This stand is easy to print and will look great on your shelf! I printed my stand using default print settings with a few modifications. Since the bottom…
This remixed part will serve as a replacement for the stock GoPro mount in order to provide a location for mounting 21x21 mm HGLRC M100-5883 GPS module on a SpeedyBee Mario 5 frame. GPS mount with GoPro v2: better fit and easier…
The source marked this model as adult content.
This is a simple speed square. It is a tool commonly used by construction tradespeople to quickly mark 90°, 45°, 22.5°. and 10° angles. It also includes a 140mm ruler along the bottom edge. Numbers are more visible if filament color is…
Speedload your mags fast and easy: Pull the follower down a little bit so it's easier to get the little nose from the adapter to hook it. Pull the adapter over the mag with the nose facing the bottom of the mag I like to hold the adapter…
Hi! This windwheel works wonderfully and because its fully ball beared the slightest breeze is enough to make the wheels spin fast :) Printing: -Parts are constructed that everything is very easy to print even on old 3D printers and not…
In this type of gearbox, all the gears of the main shaft are in constant mesh with the corresponding gears of the countershaft. A sliding dog clutch is provided on the main shaft. Gear ratios 0.75, 1.33 and neutral. This model was…
When evaluating the surface finish of untested filaments, this test id for you. Especially when printing with matte materials, the flow (or in this case the speed) is defining the finish and how glossy/matte the surface will be. This test…
Minnie can be held in place with a small dab of Sticky Tack
![LEGO Speed Champions Modular Display Stand [last update 21.07.2024]](https://media.printables.com/media/prints/532084/images/6044190_522b121d-3533-45b1-9d14-b2a10072eb0b_b8c2e7a3-f852-4a50-bf7b-1311d4b55232/sc-2024-3-2.jpg)
