Counting matching models…
A threaded cap for the Petzl Laser Speed Ice Screw. The cap threads on with tight tolerances and will not fall off. Printing with 2 walls, 15% infill in PETG is very robust.
This TPU print covers the spike of your Petzl ice axe.
This pulley is a similar design to the Petzl Ultralegere pulley that can be mounted on a carabiner and used easily. There is also the .stp file for customization. If someone want i have also the Autodesk Inventor file. The inner hole is…
Needed a tip cover for my new Petzl Ride ice axe. It is meant to spend most of its time in my pack and the only sharp part is the tip. I designed this easy to print in tpu cover to exactly fit the tip when it is in my pack. Works like a…
Fix if you broke this strap holder part. 10 minute print on standart settings on bamboo P1P
Use Case : Works for the following typical strap sizes: Printing Tips : Recommended material: PETG, PLA Recommended infill: Gyroid at 40% No supports and brims needed Works perfectly for printers with 0.10mm tolerance (0.20mm is…
Just receive an request of custom models of a “petzl descender” I just complete the models in fusion 360 It is quite hard to print. I print it in 0.1 layer height with lots of support Just treat it as a key holder or toy
This is an GoPro compatible action cam adapter for the Petzl Sirocco climbing helmet. It is intended to be taped to the helmet with a double sided outdoor tape like known from the original GoPro or action cam mounts. The two holes face…
Meine Version eines PVC Rohrschneiders für Elektroinstallationsrohr
I was looking for a solution for mounting stuff to my new Petzl Vertex Vent helmet, in particular it was the battery pack of my headlamp. So i found KIL0's design, which seemed quite sturdy, i printed it and was very satisfied.…
Ice axe wall mount designed to fit Petzl Nomic's profile (wrapped). My Ice axes are wrapped in a rubber tubing. So may be slightly large for yours. But the profile is still the same. I also included Screw Placement Template for ease of…
I designed this adaptor to my Petzl Vortex helmet so I can mount my LEDlenser H14R.2 to it. It can also be used as a base for designing mounting brackets for all kind of stuff. The parts are connected with M3x20mm sink head screws and…
This is a replacement for the original Petzl Quark trigrest which has broken. It is a first iteration and I already can see the part should be a little wider inside. If you want to fix it - there is a fusion 360 model attached. Just let…
Petzl headlamp helmet clip
Required hardware: 4x M4 countersunk 4x threaded insert to assemble base and top 2x 4mm countersunk woodscrew to mount the whole assembly to a piece of wood or furniture Printing Instructions Prusament PETG Urban Grey layer height 0.3mm…
If you own an Actik, Tikka or Tikkina Headlamp from Petzl, you probably already lost one of these. It is one of the two clips used to adjust the lenght of the lamp's headband. Even though the lamp itself is quite robust, these tend to…
Hopefully adding to the original design - my Petzl clip kept falling off - couple times I caught, last time lost. I downloaded another but it did not have the ability to attempt to "lock" the remaining bar on the strap in place. This one…
Useful for mounting of Petzl LED torch onto a bicycle helmet. No need to glue on another mount if you already have a GoPro mount glued on. This replaces only the circular part of the Petzl Kit Adapt set. I made this for my dad - hopefully…
To reduce the chances of forgetting the spare Petzl Core in the pocket of my running shorts and having it ultimately end up in the washing machine, I've designed this little case that can be attached to all sorts of things – for example,…
A adapter to connect your Petzl vizir to the Petzl Vertex Best helmet.
replacement to use any simple headband for your petzl light
This little platic piece covers the tip of the climbing knive "Petzl Spatha" in order to reduce the risk of injuries when cutting harnesses, ropes or belts which are wrapped around a human. The protruding part is ment to be placed between…
Gridfinity bin designed to hold 5 Petzl Core batteries. Bin size 1x2x4.
A 3D printable Petzval style lens with mount options for Canon EF and Nikon F cameras. Uses a 42mm diameter 145mm focal length achromat for the front lens and a 31.7mm diameter 175mm focal length achromat for the rear. Together they are…
Personnalise your Vertex with an ID tag, your initials or your blood group : no more sticker or sharpie-shaming ! Small and large labels versions included, just type in your design and enjoy ! Weight : Small approx 1.3 grs Large approx…
Cap for the Petzl Laser speed light ice screw. Just printed it a bit bigger than the original one to fit perfectly the new version of the Petzl ice screw. Category: Tools
Pour bien ranger et protéger une lampe frontale PETZL Tactikka Core. Les lentilles sont protégées et il reste juste la place pour le bandeau de serrage. Instructions d'impression Tout filament peut convenir à cet usage. Impression en…
The front points on ice climbing crampons should be stupid sharp. This is a set of protectors to keep them from poking holes in stuff other than your WI6+ ice project. Even in a crampon bag the front points are exposed and this protector…
This Mount enables you to mount your Petzl Duo S headlamp on a GoPro mount. Print settings: 0.2mm layer height 20% Infill No support required! The model shown in the picture was printed in Bambu PETG-CF to ensure a better stability due to…
Allows charging while the batteries are in the holder. Downside is that only two fit into a 1x1 square. I did consider a staircase type of holder to allow access to the charging port on a 1x2 bin, allowing for 6 batteries in that bin, but…
Plastic clip sized for Petzl Vertex. Probably works with other helmets/hard hats too - chime in with a comment if you have another helmet this fits.
This is a Wurkkos FC11 Headlamp Clip (for Petzl Tikka) to attach your flashlight to the side of a headlamp band. Right now, it only works on my old Petzl Tikka strap (25mm and with small buckles on the end), but I may make a version with…
A spare part for your Petzl flashlight that you will never lose. 1)We put the clip on the headband as shown in the picture. 2) Thread one end of the headband through the sturdy clip on the other end of the headband. 3) Thread the end of…
It's a power button replacement for good old headlight Petzl TIKKA XP: I added some improvements to make the button fit better in the socket. Obviously you need to use TPU to print this model. Also, I recommend to set Infill density to…
This model use flexible property of petg to attach your ice axe on the wall.
Use: This part is designed to be slid onto the non-gate side of a small (non-HMS style) locking carabiner in order for a Petzl Grigri to not accidentally cross load itself while belaying. This is a reasonably common occurrence without…
A nice compact holder for two Petzl Quarks. Displays them nicely but does not take up a lot of room so you can mount other equipment around them. Printed with 15% infill as they are not that heavy. 3 x 5mm screw holes
Designed to engage the tooth pattern of a Petzl Quark cascade style pick but will probably fit a wide range of tools. I printed in TPU but PLA could work. Also, check out my front point protectors for the popular Petzl Lynx crampons here .
Perfection for broken/lost head lamp clip
Gridfinity bin (2x2) for Petzl Actik headlamp
played a bit with an editor adding more shapes into my aperture plate collection. use black and enough layers to prevent light-leaks. not sure how to correct for a specific aperture, setting the camera on automatic time using a fixed…
Small Clip and Holder for Headlamps on Helmets. Printed in PETG and used standard adhesive tape to fix on the Helmet.
This is a mount for the Petzl SWIFT RL headlamp to mount onto a bike. The model is made to work an external part that can click into an already mounted adapter on the bike, such that i can quickly switch lights. This means that for this…
Dieses Teil ersetzt das Gummiteil, das den Ein-/Ausschalter der Stirnlampe bedient. Ich habe es mit Klebeband auf der Lampe befestigt. Gedruckt mit TPU A95 von 3DJAKE.
Small case for the Petzl SWIFT LT. This case is designed to stow away the headstrap of th Swift LT neatly, while not in use. You are still able to fully operate the headlight. This print makes the compact and light SWIFT LT even more…
Welcome, insret is made for Czech verison of this game but shoudl fits to ENG version too. Verison is designed to store base game + Dark Alleys expasnmion. Print: 1x Dungeon monster wheel cards 1x Dungeon petz tokens 1x Dungeon petz…
Oprava poškozených horolezeckých přileb Petzl Elios - náhradní spona a regulační kolečko velekosti
Holder for when charging your petz battery in the field
Turn your Petzi Treat Cam into a Pet Feeder. Needed to use my Petzi Treat Cam to feed my cat while I'm away. Designed this to hot glue to the front of his Petzi and use as a Feeder. Fits great and is removable. No more flinging treats and…
I got tired of storing all my activity gadgets in a box. I had this idea of a charge station and made mounts to accommodate most of my items. This thing includes the following: Female mount for Garmin Computer/Varia Rear Light Male mount…
I made this mount to attach a Fenix HP25R headlamp to my Vertex helmet. The mounts prints good from the side, with supports Use double tape on the Headlamp_mount_lock and glue it to the helmet to make the mount permanent, Category: Sport…
Apeture plates for petzval lens (150mm f4 - oryginal) Clasicc: f4, f5.6, f8, f11, f16 And special ones: -soft focus c-8 - makes lens softer, creates interesting bokeh -star s-8 - makes star-shaped bokeh -rangefinder f9 - works as…
This key opens the Petzl Tikkid headlamp battery case without needing a metal tool (screwdriver or coin). Design features Key to match the screw head (including curvature), for easy turning. Wider handle for a solid grip. Wording “TIKKID”…
j'ai une lampe petzl Ultra, et le fil électrique s'est casse au raz de la prise surmoulée. j'ai pris le temps de concevoir une piece détachée, et meme deux pour remplacer cette prise et ne pas jeter ma lampe cela fonctionne aussi avec les…
Based on the video from Petzl and Hard is Easy, I made a tool to oil and “massage” your Neox. You 've to press it on the wheel firmly and then use the port to directly oil the gap. After that you can use it with a cordless drill to spin…
A battery frame for integrating an 803035 LiPo battery and a Li-ion charging module into the battery compartment of Petzl headlamps compatible with the Petzl CORE battery. Required parts: Li-ion charging module 4 mm nickel strip 803035…
To reduce the chances of forgetting the spare Petzl Core in the pocket of my running shorts and having it ultimately end up in the washing machine, I've designed this little case that can be attached to all sorts of things – for example,…
The Petzl Noctilight case is advertised as beeing designed also for the Zipka headlamp, but I didn't like the fact that it was “flying” around in the case and that you couldn't turn the light on/off without opening the case. So I designed…
This is a mount for the Petzl SWIFT RL headlamp to mount onto a bike. The model is made to work an external part that can click into an already mounted adapter on the bike, such that i can quickly switch lights. This means that for this…
A spare part for your Petzl flashlight that you will never lose. 1)We put the clip on the headband as shown in the picture. 2) Thread one end of the headband through the sturdy clip on the other end of the headband. 3) Thread the end of…
I designed this adaptor to my Petzl Vortex helmet so I can mount my LEDlenser H14R.2 to it. It can also be used as a base for designing mounting brackets for all kind of stuff. The parts are connected with M3x20mm sink head screws and…
The Petzl Noctilight case is advertised as beeing designed also for the Zipka headlamp, but I didn't like the fact that it was “flying” around in the case and that you couldn't turn the light on/off without opening the case. So I designed…
Use Case : Works for strap buckles about 14.20mm wide or less There is another version in case you need a wider opening for strap buckles: AirPetz Chonky : Printing Tips : Recommended material: PETG, PLA Recommended infill: Gyroid at 40%…
Holder for secondary battery for Petzl headlight Actik Core. Printed without support from PETG 0.2 mm. Just cut off thin joiner to let headlight belt in and adjust the cover little bit so it will fit and hold in the rail. Orientation on…
This models allows the user to mount small picatinny rail accessories (like the https://www.printables.com/model/1488294-wurkkos-hd10-flashlight-self-locking-mount-for-pic flashlight mount) to the front or back accessory mount of various…
Wlcome and simply enjoy! * TIP - use top side down to get a more stiff movement
Credit by mdweston Summary Fairly straightforward use of the Boardgaming Insert Toolkit v2.20. I love BIT as it lets me store games vertically without bags and holds pieces in place.I chose to leave the Petz dials in their bag for…
Cool Toy YAY for ur finger :) YAY. Print Settings Printer: Ender 3 V2Neo Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.12 Infill: 15 Filament: . Tpu prefferably but Pla sould work fine White Notes: . Category: Toy & Game…
Its a Duck for yah finger. :) Print Settings Rafts: Doesn't Matter Supports: Yes Resolution: 0.12 Infill: 15 Filament: . Tpu prefferably but Pla sould work fine White Notes: . Category: Toy & Game Accessories
Made for use with 1/8" diameter bungee cord, figure out the knots yourself. Originally printed on a Bambulabs X1C.
The origin insert is here: https://www.printables.com/cs/model/378151-dungeon-petz/comments The expansion_box insert is too large for my Prusa mini so I split it to two part.
Older (2019) Petzl Actik headlamps have (probably) a manufacturing defect which leaves a ~1mm gap between the "door" and the body. It is just enough for thin wires. Note: This will not work on new (2022) Actik and other new headlamps for…
