Counting matching models…
17-04-2024: Added double threaded version as someone requested (experimental) Harder to print and needs support(the base files do not) My projects often revolve around solving niche problems i have. I typically use pill organizers for my…
" Creality K1 door gap filler with supplementary drawer" This design aims to utilize the gap space between the door and the chamber itself. By filling up this gap, it enhances the chamber's sealability and provides a storage area for…
Replacement Komplement Shelf Pin/Bracket for PAX cabinets Print Settings Printer Brand: Creality Printer: Ender 6 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: .16 Infill: 15% Filament: Hatchbox PLA Notes: Printed on Ender…
Manu Militari (witch translate to “With a military hand” in Latin, meaning using military force or force of arms) is an hex-based terrain tiles system that can be used for wargames, strategy games, RPGs and so on… The tile system At its…
Don't forget to hit the like button if this helps you :) Improved calibration prints with minor modification to connect all the printed squares for easy removal from the bed. (uses a 0.4mm line width) These prints work seamlessly with the…
Introduction: Are you frustrated by the absence of suitable measuring spoons for your dietary supplements? Whether it's your booster or creatine, accurate measurements are vital, yet these spoons are often lacking in product packaging.…
Drawer Organizer for IKEA PAX Komplement 100x58 Enhance the functionality of your IKEA PAX Komplement 100x58 drawer with this customized organizer. Designed as a remix of the original "Parametric boxes for drawer" Fusion 360 file, it…
Tomorrowland PeopleMover Carriage
***Added a new V2 with thinner walls and larger interior. V2 is compatible with V1*** 1st published print so be nice :-) I have a few other things that I have worked on for RC cars (traxxas maxx) and some odds and ends around the house,…
Since the original mounting mechanism is quite poorly designed and breaks easily when disassembling, I designed a more robust one. It does not rely on clips and makes gravity do the job of keeping your rail in position :)
Drill hole marker for IKEA complement hinges. For 19mm thick wood! !!! WATCH OUT !!! IKEA has changed the orientation for the softclose hinges, so check which markings are required for the model you are using. use Place the door and body…
prep your supplements / pills for the week and easily transition for the next dose with stackable containers
This pill container has been so much better than anything I have purchased commercially. Absolutely love it. It locks into place at every section and you squeeze the outsides to move it to the next section. Great in PLA. Both parts take…
This drill guide helps to precisely drill the holes for door hinges
Nothing more to add. You can modify the size of the cornerpieces easily in the 3mf file, if you have any problems fitting these into your pax komplement. Have fun and keep printing
This is a drawer divider made for the 100cm x 35cm Ikea Pax Komplement mesh drawer (product code 902.572.94). Attaches to the drawer using zipties and can be placed in any position to achieve the desired compartment width.
This model derived from the original IKEA KOMPLEMENT 12571 or 21590 clothes rail holder. It should be printed at least with PETG or stronger materials like Prusament ASA or PC Blend. The print should be done with 25% infill, random seam…
Funnel to be used with standard water bottles to allow for the addition of supplements. Fits over threads so as not to be easily knocked out of the bottle opening.
Supplement comfort legs for acer nitro 5 (25 mm). 2024/02/25 New model stilized. I add the f3d to be able to modify, as it seems that there may be different sizes or models between countries. Acer nitro 5, legs to slightly tilt the…
Complement for the cool Yarn Bowl for CatSandwhichFibers. A base and two stands for keep the yarn stand up. https://www.thingiverse.com/thing:2482299 Category: DIY
Special thanks to Gulsifer and ZombieHedgehog for the design, ideation, and testing that went on to create these supplemental files. Big thanks to Rolohaun for the original printer design and Kanrog for the original Barracks design we…
The 3D model "IKEA KOMPLEMENT Shelf Hook for all PAX Wardrobe Frames" is a detailed and accurately scaled replica of the original KOMPLEMENT shelf hook designed specifically for use in all IKEA PAX wardrobe frames. This model provides a…
This is a remixed model. @SeanStarkey_219658 did an amazing job designing this thing. I just wanted to print it at once without the need to glue the frame from two parts etc. I printed the thing at Bambu P1P (if you let Bambu Studio align…
Useful space-saving boxes to keep your komplement drawer tidy. The models are divided into two groups A and B. Inside an Ikea Komplement drawer you can insert two lines for model A and one line for model B. For each model A and B there…
Redukce z lega technic na Duplo. OpenScad. Nastavitelná.
Here is a remplacement for the Komplement clothes rail. You don't need to use any supports to print it. I printed it with these parameters: - 0,2 mm layers height - 6 walls - 30 % infill Please give it a 💖 if you like it 🥰
Parts form Ikea - Komplement - 130900/130901
This is a quick clip that partially snaps in place but can also be easily slid along for a tag system that requires no support, is partially angled for easier reading, and is designed to work with the Komplement Mesh Basket products.…
This is a modular model. I needed something larger but my small print area on the Ender 3v2 limits the size. So I worked this thing out. I'm sure a better tuned printer would print a much nicer model. I'm sure you can see by the serious…
I modeled this after the pre-2021 Tomorrowland Transit Authority Peoplemover sign when it was sponsored by Alamo. I modified the sign proportions to accommodate printer limitations, but maintain the spirit of the original design. The sign…
This is a replacement model for IKEA's KOMPLEMENT coat hanger rail mount, piece code 21590.
Modern Filament Spool Rack/Holder (Ikea Komplement) This filament spool rack is designed with a modern and sleek structure, providing not only storage but also a stylish addition to any 3D printing setup. The geometrical patterns on the…
No excuses—always get your creatine in! This heavy-duty container keeps your supps locked in. A compact creatine travel organizer that holds exactly 8-10 grams when filled completely (tested)—so you can skip the scale on the go! Designed…
These are supplemental components for the Portal 2 Turret model posted by whosawhatsis: https://www.thingiverse.com/thing:8277 and used for the Sentry-Picam project: https://github.com/TinkerTurtle/Sentry-Picam The RPi components are for…
Replacement for rail holder
Simple dispenser for ESN (and similar) supplements from the container. Two Versions: Normal 64 mm diamenter Large 73 mm diameter
230324 IKEA "Komplement" like bracket replacement or 2 way mount Still had a IKEA komplement cloth hanging rod lying around, one bracket was missing and I wanted to mount it vertical under a shelf. So I designed this horizontal and…
english: Almost everyone who has ever installed a robotic lawnmower knows the good advice to plan a reserve loop at the perimeter wire in several places to make any repairs or changes easier. Usually this is done with a wire loop in the…
One-a-day vitamins / supplement / medicine tube, meant to go in an old fizzy tablet tube. Could of course be used for anything. Feel free to use and improve the openscad file. Probably should be printed with supports for the "handle".…
Ikea Metod cupboards lack a low height drawer. There is one available in the Pax/Komplement series. However, the Pax standard width of 50cm does not fit the Metod's 60cm. Further, on the bottom of my cupboard, the door hinge got in the…
a short 2-slot bit holder implement, able to hold three 4mm bits. It is specifically designed for the Mini Flex Companion; it will likely fit in other short slots, tho I've not tested yet. EDIT: Tested, It will fit in the Flex Companion…
Pieza hecha para suplementar la tuerca de la bateria moto que a veces es dificil enganchar sobre todo si tiene conectado para accesorios,con lo cual reduce l altura del tornillo y no llega a enganchar en la tuerca , ya que la altura del…
This sturdy, extended shelf allows you to stack two Komplement separators on top of each other. Unfortunately, only one Komplement separator fits in the IKEA PAX wardrobe because the standard shelf is too short. This sturdy, extended…
I loved the Bowden tube connector mod (linked: Remixed), my goal was to be able to have a color matched and similarly designed handle for the left side of my core one, minus the hole for the Bowden tube connector. This is my first upload…
Bonjour, Voici un modèle réduit d'aviron que j'ai modélisé à la demande de collègues. Ce n'est pas très détaillé mais il peut faire très plaisir à votre/vos amis amoureux de la "pelle" ! Si vous n'avez pas d'imprimante n'hésitez pas à me…
Moving into a new apartment with your old Ikea shelves sometimes leads to reinforced shelf pins ;-) I am very happy with the result. It is really strong and works with the original screw. The thinkering with different print orientations…
HOW I MAKE IT: SPOOL HOLDER: https://www.thingiverse.com/thing:4765789 PLA: https://bit.ly/3svAHrb FOLLOW ME: Youtube: dukedoks Instagram: @dukedoks Facebook: @dukedoks SOFTWARE: Fusion 360
When assembling the shelves inside a pax wardrobe I found the shelf holders a bit hard to press. So I made a simple tool to hold the holder in place and have more surface to press on to. I have attached the STEP file also for making your…
Information: As IKEA do no longer sell the plastic box and its accessories for their PAX-series, the only option was to solve it with 3D printing. For more information about the plastic box: https://en.ikea-club.org/item/s19808460.html…
Komplement drawer divider A divider to divide 50 cm wide PAX Komplement drawers. The two pieces slot in place and are held together by the drawer. To print For a Prusa CORE One or similarly sized printarea place both pieces at a 45 degree…
Have always been in search for a key bar thingy that the keys can stay in lock position without swinging out randomly due to loss of pressure from the screws. can't pull the trigger to get the Keyport Slide, not just because of the…
I have designed a new end piece for the IKEA Komplement wardrobe rod (old type) with an oval cross-section. After printing, just slide the rod into the part (it cliks into place with a mechanical lock. The rod hanger is attached to the…
Echo Dot Gen. 5 Wall Mount Drilling Base
H0 scale - 188 mm Platform complement (height) - thanks to phildc (3rails.com) To be glued on the previously published here (1222647) low concrete platforms No support needed Complement de 188 mm pour quai de voyageurs (hauteur) - merci à…
This Pill dispenser can be remixed. Currently holds 5 pill containers. Hope you like it!
This model is featured in figure 6.16 of Visualizing Mathematics with 3D Printing . Category: Math
shelf for supplements, magnetic for the fridge magnets 40x12x4 space inside 4x 60mm
Brackets are fixed to the drawer front and back with 10mm 6g countersunk woodscrews and a suitably sized 6mm threaded rod (print brackets have 6mm thread designed in). The threaded hole is offset to allow it closer to the drawer bottom to…
Just print as many hooks as you like to complete your coat rack with some hooks. Designed with a diameter of 25mm for exact fitting the Ikea Komplement rod. :) Enjoy
Yafia, M. et al. Microfluidic chain reaction of structurally programmed capillary flow events. Nature 605, 464-469 (2022). https://doi.org/10.1038/s41586-022-04683-4
I used this baseplate for my Gridfinity with the size of 5x10 for my 25cm trays and 9x10 for my 40cm tray, but any other should be fine as well! My fitter was printed with ASA and therefore warped. With PLA you may achieve different…
Caja adicional para aprovechar el espacio superior disponible en la consola central de almacenamiento de la SUV - Blazer RS - Chevrolet. Solo ocupa una parte por lo que deja visible la parte inferior. Lo diseñé en dos partes por lo que NO…
This is a stylish divider for the Ikea Komplement drawers for those that want to create additional compartements. Takes about 6-8hs and 250g to print. Can be Printed in Multicolor or Singlecolor. Min. Bed Size is 256x256. (X1C or…
EDIT: I've made a better detachable version! I recommend using it instead: A short 1-slot USB implement. It fits very nicely in my Roxon Mini Flex Companion. For usb drive, you would want to use an ultrasmall drive like this or similar:…
I nedded a box not to forget to take all my supplements every day. Everything I can buy couldn't fit 3-5 pills of creatine, so I made this. It is compact and can stand on a side. It has 7 conpartment for every day of the week. The middle…
this is heavily inspired by the IKEA Komplement holder, of which we have one. Printing a second one was much faster than going to IKEA and buying it. Screws into the existing 5mm/System 32 holes with the standard Euro-Screws ( I used…
supplemented filament output
Some spare part for the clothes rail Komplement from IKEA https://www.ikea.com/fr/fr/catalog/products/30256891/ Block the tube with a screw Ø8mm head Print Settings Printer: I3 MEGA Rafts: Yes Supports: Yes Resolution: 0.2 Infill: 40…
I lost my gamer supps scoop so I printed a similarly sized one. Made the handle shorter to fit tall and wide tubs! Print open side up, use slim trees, .12mm layers.
Hier eine sehr simple Konstruktion für die IKEA komplement Schmuckeinsatz mit 6 Fächern und mit 12 Fächern. 0,2mm wäre mein Empfehlung.
For use with the configuration where the AMS sits on top of the printer. The light attaches to the handle on the printer's glass lid. Quick and easy to remove. Printing: Printed in Bambu PETG Basic (Grey) on the smooth PEI plate with…
This model is an addition to the sound project of the 3D printed M41A rifle from the movie Aliens. Electronics are placed in place of the magazine and control elements such as a switch, wheels for adjusting the volume and a door for a 9V…
New version with detachable USB. It holds very solid, you might have to lightly file the locking-bump so it slides in smoothly. Compatible with any Roxon flex-series multitool. UPDATE 3.0: The design has been modified to be shorter and…
The SV08 stealthchanger mount moves the head up 15mm and slightly forward. It will require raising. The bed shims require M4 thread inserts. Remove the bed, insert the shims as per photo, use the 6 original bed screws to fasten the shims.…
It can be screwed in using IKEA's 100325 screws (or similar).
Grab Todd's files HERE as you will need them for most of the storage. My files just fill out the gaps in the box so things don't shift around and you can add two more cars from expansions into the sideways box, have a dice tray, and store…
I've created a nice Coat rack in the space between two walls with a Ikea Komplement rod. It turned out great and sturdy. You can find the hooks I designed also on Printables.
Bonjour, Voici un livre tout simplement. Je l'ai modéliser pour offrir à un collègue partant à la retraite. Le livre en STL est vierge. Je rajoute les .STEP pour que vous puissiez le personnaliser facilement. Je peut aussi vous le…
This is a model to convert a regular IKEA “Komplement” wardrobe rail into two shorter parts with a downward 90° angle. ##### The individual parts can be used as regular replacement parts as well ##### My girlfriend wanted to have a short…
I love this supplement dispenser. In use, the Pill Pods would flip on me all the time and not stack properly. Probably my loading technique. I reprinted after reducing the passage way tolerances in both directions. The tighter fit works…
I needed a clothes rail for an IKEA Pax wardrobe. So I created this remix to use an old broomstick as a rod. Suitable for a 15/16" (23.8 mm) broom handle. It works great and you can save 10€ :-) Cheers
Suplemento para Creality Filament Dry Box 2.o para carretes de filamentos del 21cm de diámetro, tipo Printalot o Plastar
Gridfinity holder for the Parkside distance laser 3x1U, 5U height
If you are implementing a toolchanger using the stock SV08 toolhead, the rear located fan would need removing since it gets in the way when docking/undocking the head. This cowl allows the rear fan to retained by rotating it out of the…
A cause d'un effort trop important, l'accouplement d'origine avait cassé. Recréé à partir de la pièce d'origine. Imprimé en Prusament PC-CF
holds 3 long 1 layer implements.
suplemento para la parte posterior de la impresora, para evitar que el perfil tenga movimientos no deseados seleccionar hay varias piezas para seleccionar con diferentes espesores, para seleccionar la que mejor se ajuste a su impresora.…
Reveal 4-n-1 land leveler. This is a model I designed in tribute. When printing this model it is best to scale it to 200% or more for detail and assembly reasons. Files are separated to easily print in color. I printed in PLA using High…
Hi Makers, Few month ago I revamped my old Ikea Komplement pull-out pants hanger that was not in use anymore into a small part organizer. You will find a small handle and a box with separators in the 3mf file. I can, of course, adapt the…
I saw this thing floating around a gym and decided to create my own version. This handy little funnel will hold powder supplements to be dispensed into any receptacle. In particular, this will fit into any water bottle sold at any retail…
This remix (similarly to the original model) helps to put komplement shelves to levels where otherwise it would not be possible due to the hinges. I could not print the original model successfully with my printer, hence I created this…
A supplemental badge that changes the "PRUSA" text on the frame to "PRUSAWIRE" with the Positron logo to the side. There are 2 variants of this available: “ Easy Mode ” - The part is printed as a single piece with an optional filament…
The Ostia pre molded insert that comes in the box is one of the few that is decent. This just adds a few quality of life things to make setup faster. The supply boats simply allow for the cubes to fit better. They were narrowed slightly…
I needed to mount a shelf underneath a fixed in place built wardrob. This bracket vill give you about 25mm (1") space between shelf above. Use 4x30mm screw to mount it. You need to print 4 mounting brackets.
Complementary phone rack for my desktop organizer, very simple print, nice thin walls. No integrated induction charger (yet! :-)) Shown in the pictures printed in Bambu Labs lava grey PLA-CF
This is a magnet label to better organize ikea pax/komplement basket contents. You can print the stl and write on it or modify the step file in order to print two colors on the first layer Holes are for 20x6x1.5mm magnets
9mm higher shelf so that 4 drawer and a basketdrawer under the hinge works. Not possible with orginal IKEA solution. Thanks Dan ( @Dan_3D_49659 ) for this solution. I made it only 9mm higher with cutting the model and extrude it.
A series of parts I printed to supplement my enclosure… “Axis M1065 mount” - an adjustable height and single-screw mount for the IP camera watching the printer “Axis P1224-E mount” - an adjustable height and single-screw mount for the…
Add-on for using IKEA KOMPLEMENT pull-out rails (602.632.44) under the desk, for example in the kitchen unit. If you want to use one basket (for example 002.573.02 ), you will need one of the front-left and one of the front-right and two…
