Counting matching models…
Needed a way to discretely store my rifles in a locked closet. The walls are rather soft, so I didn't want them leaning on the drywall--scratching the walls and getting dust everywhere. This mount allows the rifle to mounted vertically or…
This is a flipbook machine! Frame 10 frames of your awesome stop motion creation into this vintage TV and whizz away The model prints in multiple parts that can be assembled without glue or fasteners and can hold 10 Instax Mini photo's…
Raider X Only | Raider MP17 Here I had trouble with 0.6 print head, which would not accurately print the surface of the cheek weld near the flux rails. The rail position distance to the surface is limited by the “gas cap” of the raider,…
Halterung für eine Logitech MX-Keys Tastatur um diese unter der Schreibtischplatte zu befestigen (wahlweise schrauben oder kleben) Zusätzlich habe ich noch eine Halterung für ein USB-Ladekabel beigefüft, das in Verbindung mit einem…
I remodeled https://www.printables.com/model/309871-sunlu-tecbears-fila-dryer-s2-filament-trockner-s2/files
Since I feed my filament from above, the original position of the FRS is not optimal. You Need: 1x M3x35mm countersunk 1x M3x25mm countersunk 2x M3x8mm buttonhead Except for the troughhole of the M3x35 screw you screw the other screws…
Raider MP17 TEST Model | Raider X Version Here Test model: I have added width for the rail holes to allow for shimming the rails. Once a known shim width has been determined, I will reproduce the model with the measured space consumed by…
Requires pair of two. Simply hooks in the air vent. Print in any material available. Dimensions can be adjusted to fit your phone (if needed) using the OpenSCAD file provided. Holders can be easily be removed, stored, and re-deployed in…
I like my LCD on top. Since there was none available I made one. It fits the original LCD case. Fusion 360 file is added if you wish to edit it.
Bumper car felt like a perfect fit, given the Crash Derby game description, so i designed this one. It matches the size of the original models and reuses the same base. Easy to print with no supports. Comes with the original base and the…
The Drybox is a remix and recreation of above models. It is build to fit directly on top of the Prusa MK3S+ Printer and has a shaft to hold the spool, so no need for any bearings and other tubes. To attach everything you will need this:…
This is a simple model of a MOSFET (Metal-Oxide-Semiconductor-Field-Effect-Transistor). It consists off many different layers and thus there are many objects if you decide to print them in different colors. In the photo of the design, the…
Print with 4 perimeters Parts required -2x 2M, 2x 4M bolts, nuts -cheap 3rd hand for soldering
cool creation by meshy Have fun
Soporte para GoPro / Cámara Deportiva – Elegoo Centauri Carbon Este soporte ha sido diseñado específicamente para adaptarse a la puerta de la impresora Elegoo Centauri Carbon , encajando perfectamente sin necesidad de herramientas ni…
This design is a fender assembly designed to mount on the Ibis Ripmo AF Clevis to protect the linkage and seatpost from mud and small stone spray. The printed parts have two slots in which the user is supposed to insert two pieces of…
minidriver for precision bits printed settings: 0.20mm layer height, 4 perimeters, and 25 of infill
Grimm's Fairy Tales - Cinderella - Stepmother Lady Tremaine 3D printable model.
Grimms' Fairy Tales - The Juniper Tree - Evil Stepmother Serves Stew to Unknowing King
Grimms' Fairy Tales - The Juniper Tree - Evil Stepmother Decapitates Stepson 3D printable model.
Grimms' Fairy Tales - Evil Stepmother Makes Stew Out of Stepson 3D printable model.
RC (1/10th buggy, ...) racing. More and more people use a personal transponder to monitor their lap-times. When not racing but training a personal system can be very usefull. Lapmonitor produces a system for this purpose. (…
A thicc TPU mount to protect your Action 2 on Supafly Syncmode/Flipmode frames with a slot for TBS or CameraButtter glass ND filters – you put it in before the camera so that it doesn't slide out like on other mounts.
This Mount is meant to be Printed 4 times and can be clipped to the top of a MSI Optix MAG274QRF-QD screen. The two cable files can be printed once each and are used to stop the cable from pulling the tracker out the Top.
Update 2019/07/02 updated parts, finer tuned dimensions. one has a shorter top-plate. A small platform that can be mounted on top of the central diff or slipper. The lapmonitor-transponder can be taped on top of it or retained with a…
Der Wischwasserbehälter beim Leapmotor B10 liegt leider so weit unterhalb des Niveaus des Motorraums, dass beim Nachfüllen immer etwas Flüssigkeit daran vorbeiläuft. Um dieses Problem zu umgehen habe ich diesen Trichter entworfen, der…
Filament guide without run-out sensor
My CR-6SE sits in a cabinet which used to house a rigidbot. The side-mounted spool on the CR-6SE makes it markedly wider than the Rigidbot, and the original top-mounted spool holder by Miller_Maker sat too high to fit in my cabinet. A…
I made a few parts for the devterm so you can either a) remake parts you broke/lost or b) personalize your devterm. To that i also added a strapmount; this strapmount is meant to guide the strap (20mm and 25mm) around the Devterm. Its not…
Grimms' Fairy Tales - The Juniper Tree - Evil Stepmother Hates Her Stepson 3D printable model.
Grimms' Fairy Tales - The Juniper Tree - Musical Bird Drops Millstone on Evil Stepmother's Head 3D printable model.
This uses all OEM hardware from the original flux raider X. Get a much more desirable cheek weld and at a much higher mounting position - now in line with the optic hood. Ideally, use a 0.4 nozzle for the contours and layer lines to come…
Here is a Rush FPV Cherry mount for double antennas. the stock antennas are crap so here is an option for mounting better ones. They fit into the mount with some of the tube cut off, a nice snug fit so won't come out in a crash. Only…
JE Machine SOPMOD Stock Storage Tube. Mirror the Cap model in slicing software if you need the locking stud on the other side.
I've designed this to make some more mounting room on my stock bike rack, which is only intended for bike bags. It simply snaps on top and can be further secured with zipties. Apart from the 3D-printed parts, you'll need: 10mm Diameter…
Celebrate a special bonus mom (stepmom) with this stylish 3D printed text sign. “Super Bonus Mama” is designed to show appreciation for someone who may not be your mom by birth, but absolutely is by heart 💛 The combination of bold white…
If you like this give me a sub on IG or Youtube https://www.instagram.com/martymcfly_fpv https://www.youtube.com/channel/UC0Ps_VxWIuz_74Qz01wQ68w?sub_confirmation=1 Works with most sessionmounts. I use it with apex session couch…
A Simple police car to be used in Zombicide Prints in three parts that need to be glued together. Other Versions There is also a version for laser-cutting . Support My Work Should you want to, you can support me on Patreon . If you are…
Zombicide simplified Pimpmobile, to use with original token & printable in less than 30 minutes. I wanted to print @kap42 Pimpmobile, but with a simplified design, to make it printable in less than 30 minutes and specially without havin…
Combine with the original model to make the full assembly.
Top mount spoolholder for Monoprice Mini Delta. Design is simple and easy to print on the small bed of this printer. Based on gammarostock's filament holder for his delta rostock mini pro 2 Total you need 6x M3 bolts and washers 6x M5…
Everyone who owns a TronXY X5 or maybe a successor knows the wonky Y Endstop. This little clamp which sits on the 8mm rod holding the end-stop switch and fixated only by a 3mm screw which bends the plastic to its limit to keep the…
Should you remove the headrests to gain some space when the seats are folded down, you lose the capability to fix stuff like a trunk protection cover on the headrest rails. Those dummy inserts let you still fix things. The narrow one is…
Print in TPU with support on side. Works with most sessionmounts. I use it with apex session couch https://www.thingiverse.com/thing:3864181 if you like this give me a sub on IG or YT https://www.instagram.com/martymcfly_fpv…
Bring dynamic action to your stop-motion projects with this Wolverine-inspired claw set, designed specifically for animation and display. This model pack includes multiple claw extension positions, allowing for smooth transitions and more…
The orange clips that allow the engine covers to lock in place are easy to lose. Upon disassembly one of them fell down and had never been seen again. As stellantis was unable to help me by providing an official replacement part, I tried…
Pumpmon Digimon Creature Model
Brackets to set the unoriginal prusa drybox slim on top of a 300mm voron 2.4 . printed in asa, 4 walls 5 top and bottom, 40% infill, basically voron print standard i printed them with the round hole on buildplate, supports needed. bolts…
So I made my own retro gaming console modeled after "PMO" (a relative of BMO that appears in, like, two shots in “Adventure Time!”). This is essentially a fancy shell for the Raspberry Pi Zero 2W, which I use for retro game emulation…
Fits Vifly Finder 2 Fits Capacitors ⌀12mm±0.2mm; max length 31mm Probably fits the Syncmode as well. Just mind the camera angle.
10mm flat cutout riser pad designed for longboard and topmount setups. The cutout shape reduces material and weight while maintaining full structural integrity around the truck mounting area. Countersunk bolt holes allow hardware to sit…
GoPro Mount for Strapmounting Category: 3D Printing
So this fun little project became extremely important when my daughter broke the clasp on her topmodel jewellery box. Dad to the rescue with a little CAD design and some intelligent slicing. It saved us a bunch of money not having to…
I had a Hue Lightstripmount lying around that I wanted to mount under my desk. Very crude design to fit 4mm x 20mm wood screws. May be updated with a better design in the future.
Celebrate a special bonus mom (stepmom) with this stylish 3D printed text sign. “Liefste Bonus Mama” is designed to show appreciation for someone who may not be your mom by birth, but absolutely is by heart 💛 The combination of bold white…
mount for the Transit Max router from pepwave. 3 pieces, base, clip arm and clip top. screws are required for assembly. 2.5mm x 14mm hex screws x 2 or top clip, and 3.0mm x 12 mm for the clip arm to the base Print Settings Printer Brand:…
Piccola sveglia disegnata con Fusion 360 e stampata con bambulab P1S filamenti eSAN. Il meccanismo dell'orologio è Sang tai (Amazon) con filetto lungo 15mm
Case to hold a lap monitor transponder, push button, voltmeter, 18650 battery and 18650 charge/discharge BMS You will need: Lapmonitor transponder voltmeter display (https://www.aliexpress.com/item/32909618539.html) push button…
Under Desk SnapMount – Clip It, Screw It, Store It! Say goodbye to clutter and hello to clean desk vibes! The Under Desk SnapMount is your 3D-printed secret weapon for stashing external hard drives, power bricks, or whatever’s making a…
With this print you dont have to use tape anymore to regonise the movements of your Motor. Simpel, Cheap, Good.
with screwholes but can also be glued or sticked with doublesided tape to any surface of your choice. Printed without supports Hairclipmount is printed upright Hairclipbar is printed flat for strenght the parts are just stuck together and…
Adapter for GLS115 Mini prism Pole to Rampmount Tablet Claw
i made these right after setting up the dual mountup dual monitor stand to keep it from tipping over i have cats that like to come up here and i dont want to lose 2 monitors crashing down uses screws to keep it in place yet just enough…
Build a simple StopMotionBox using printed parts and wood without using screws or glue or anything else. You can simply disassemble and store it and assemble it when you have a project :) A paper of A4 fits onto the ground plate. On the…
Case for Digilent Pmod I2S2, uses two M2.5 screws and nuts. No supports needed, will probably print fine with whatever filament/layer height you feel like using. Note that the pins are slightly recessed into the case, so depending on the…
Pretty self explanatory. If you have some Zippr Zipmounts and want to get a flush fit with your seatpost then these will help. My intention is to use reusable zip ties so that I have a secure but "quick" to release/attach. Category:…
A simple spacer you might need when installing your Lampmount onto your REPRack
Dieses Gehäuse für ein RGB-LED-Modul (5 V / 5050 Full Colour LED) wurde entwickelt, um das Modul sicher aufzunehmen und sauber in Elektronik- und DIY-Projekte zu integrieren. Das LED-Modul kann von unten eingeklipst werden und sitzt…
Screwdriver Holder for Honeycomb Storage Wall (HSW) Clip-on screwdriver holder designed for the Honeycomb Storage Wall (HSW) system. The holder features elongated mounting slots, allowing flexible positioning and orientation on the wall…
I had the problem, that my lampsocket broke, so i cant mount the lamp on the ceiling. So I designed this thing. Please note: This is designt for a Lamp with a lamp with ayn inner socket diameter of 109mm. Ich hatte das Problem, dass mein…
Should work for every tubular light with a diameter of 27 mm (or less with not a perfect fit) Can be used on either end or in the middle of a REPRACK bracket and can be screwed in for better support
This model will hold a LeapMotion and can be mounted on a camera or microphone stand. The clamp is articulated so you can adjust the angle on which the LeapMotion holder is held. The hinge is held tight by a M3x20 with a nut on the other…
Lost the original so I made this.
The Hallbar frame is quite cumbersome to remove as you either have to unscrew the rails completely or unscrew the rails from the frame from the underside. I have the frame mounted under the sink, so it also gets in the way when I have to…
Studenti by se měli naučit navrhnout a v profesionálních 3D softwarech vytvořit charakter pro svůj film a ten pak zhmotnit prostřednictvím 3D tisku.
With this print you dont have to use tape anymore to regonise the movements of your Motor. Simpel, Cheap, Good.
Case for Digilent Pmod I2S2, uses two M2.5 screws and nuts. No supports needed, will probably print fine with whatever filament/layer height you feel like using. Note that the pins are slightly recessed into the case, so depending on the…
Der Wischwasserbehälter beim Leapmotor B10 liegt leider so weit unterhalb des Niveaus des Motorraums, dass beim Nachfüllen immer etwas Flüssigkeit daran vorbeiläuft. Um dieses Problem zu umgehen habe ich diesen Trichter entworfen, der…
