Counting matching models…
Update 23rd November v2.1 Added an additional model suitable for 6x2mm magnets. Update 14th November v2.1 Added an additional model suitable for 5x2mm magnets. Update 13th November v2.1 Added an additional model suitable for 6x3mm…
Update 10/27/22: Some user has asked me for a version to fix on the machine and here you have it to test. Attached is a "beta" version of the divider to fix in the corner of the machine with double-sided tape. I emphasize beta. It would…
Keep your pneumatic tools organized and always within reach! This wall-mounted holder is designed for air compressor tools such as impact wrenches, air ratchets, blow guns, tire inflators and die grinders. The holder keeps your workshop…
A more simple Y-Splitter for the Bambu Lab AMS PTFE connection.
.STEP model of the pneumatic fitting commonly on Creality hotends with bowden tubes. For use in CAD, not for printing. https://thangs.com/mythangs/file/605391
The output is tangential to the coil which allows the filament to unwind much more naturally than with the original output. It is necessary to glue the part with a heat resistant double sided adhesive, this avoids screwing the part and…
Small air tank for pneumatic Lego Technic. When slicing, don't forget to disable supports on the inside of the air tank :) I recommend to coat the print with either spray paint or epoxy to ensure, that air does not leak from the…
This a drop-in replacement part for the K1 extruder cover. It's compatible with all versions of the extruder (V1, V2, V3). I have made this cover because I wanted to be able to upgrade the extruder V1 and V2 with the most interesting…
I re-made JBE's remix of the original connector by Phil-ip with the following improvements: Regenerated from original model without using re-meshing, avoiding geometry noise. Added internal taper to lower part of M10 thread, eliminating…
Lock clip for PC4 fittings and ptfe tube connectors
Lego compatible air tank
Je to můj první modlel, tak prosím o schovívavost :D Jedna verze je s dírama, druhá bez. Tiskl jsem to na PRUSA MK3S+ a MINI+. Z matného černého PET-G. Pokud máte funkční, správně seřízenou tiskárnu, tak se vám ani moc nezbortí převisy :D…
This is a remix from the Y-Splitter for Bambu Lab X1. add 10mm Brim no Support needed print with ABS or PETG the O-ring of the fittings must be removed…
This is a work-around for those Creality K2 Plus owners who experience a failure in their extruder's PTFE tube's Pneumatic connector such that it stops holding your PTFE tube. You can use this with an M10 Pneumatic connector that will…
This design belongs to this dry box concept ( https://goo.gl/Lesu5Q ) which allows keeps your filament dry serves as a spool holder at the same time. This design allows you to replace the pneumatic connectors. Some users reported, that…
The engine is designed to not require any additional fasteners but it still needs some non printed parts and some tools. The assembly guide can be found as a PDF in the files. I'd recommend printing the 3mf files as their are some parts…
Hang all of your pneumatic tools under a cabinet, in your car og in the ceiling. There is a little indent so that the tool doesn't fall out by it self. You have to lift the tool and then pull it out. Hope you like it! PS. This is for the…
Simple clips for cable management
Filament outlet with PTFE pneumatic connection for Sunlu S2 Dryer with holes for M3 screws
Pieza de sustitución para cepillo Dyson Pneumatic.
I remixed the model from LayersFarm to fit a M6 pneumatic connector instead of M10. It's the model for 5x5mm magnets .
Remix : 1.logo X1 → P1P 2.improve filament plug phenomemon 3.add a magnetic base with 2 6*3 magnets BOM ： 1.glue 2.6*3 magnets X7（N52 will be better） Print Material: PETG (optimal) - PLA (best) Layer height: 0.08mm (optimal) - 0.12mm…
Prusa screwed up bad with their PTFE conectors - they are unobtanium, along with brass olives that you CAN'T even order from them. So I modified greatest thing ever made by Ondřej Kotas on thingiverse (…
I looked at other models people had made to hold air tools. I wanted one that held the tools at and angle so they don't have a chance to fall out of the holder, so I designed this. It looks small and like it won't take a lot of weight,…
Adaptateurs de pneus gonflable de chez RollyToys pour être monté sur les tracteurs Peg Perego Ground Force. Adaptateurs pour roues arrière et roues avant. Pour les roues avant il faudra en plus repercer l'axe des roues avec une mèche de…
Tweaked the PC4-M6 remix of this fantastic design to add 6x3mm magnets.
tappo di chiusura per valvole dei pneumatici
This adtabter allows the humid air to escape from the dryer. Unlike the edgett model An M6 thread is used for the fitting and an angle of 70 degrees so that the guide works with as little resistance as possible. Info: Make sure to print…
I made a filament drybox out of cereal storage containers (I used these: https://www.amazon.com/gp/product/B07NP98YKY) and Pneumatic PTFE fittings (I used these: https://www.amazon.com/gp/product/B01KHN1HWY). I designed this nut that fits…
Lego 4697B (Pneumatic T-Bar)
Pneumatic Push-in Fitting Removal Tool This is a tool for removing the standard push-in fittings from pneumatic equipment. Made for both 4mm and 6mm tubes. I couldn't find any already-made tool models for this job, so I thought I will…
Wanted to make an air horn for my kids ride on truck similar to a train or large truck horn. designed to print without support and then bolt together with 1/4 20 bolts. use a few layers of 0.01~inch acrylic or metal (like the walls of an…
Demo and assembly guide: https://youtu.be/9Cofmy4bZX4 3d View: https://skfb.ly/6KoX8 Added a balloon remote for it: https://www.thingiverse.com/thing:3675568 If you like how it works, you can support me by purchasing one of these body…
Designed for 0.2 mm nozzle but may work with larger nozzles. Category: Tools
A #4 Pneumatic Push Fittings Plug designed to plug unused port on filament dry box. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.1mm Infill: 100% Filament: CCTREE PLA White Notes: For better…
Locking clip for 1/4" push-to-connect pneumatic tube fittings. Based on McMaster part 51055K413. Great for automation and robotics projects where you need to ensure pneumatic tubes will stay in place. Highly recommended for FIRST Robotics…
Heyho I have two designs here. The first is to prevent the filament from being pulled over the metal thread. The M5 -> M10 adapter is for people who don't have a suitable M5 pneumatic fitting at hand but, like me, have lots of M10…
Wankel pneumatic rotary engine. A working model, you can run with your lungs.
THIS PROJECT IS WIP. PICTURES AND MODELS WILL BE UPLOADED AS THEY ARE TESTED. This is the first of many push-to-connect fittings designed to carry compressed air or low pressure liquids. These are designed to be print-in-place , but also…
Little Clip to put into a Pneumatic Push Fitting to prevent unwanted decoupling. The size in the filename is referring
You will need 24 #6x1 Screws and 8 #6x1.5 Screws. I used Sheet Metal Screws with a Pan Head. @Menards Three (Part# 88244 Handi-Pack) ¼ x 2 Compression Springs @Menards Three (Part# 88252 Handi-Pack) ¼ x 1-1/16 Compression Springs @Menards…
No pneumatic fitting? No Problem. This remix doesn't require it. It's a smooth bore hole now so just run the PTFE tube straight through as is. Provided 3mfs for you with a few options ranging from 3.90 to 4.20mm in 0.05mm increments,…
I have been using Clyde Bradshaw's guide for a while with great success. However I've changed my print setup and now have a drybox with multiple filaments coming out of PTFE tubes, so I designed this to accomodate them. It was designed in…
The hinge creates vertical lift-up action using a basic hydraulic gas strut. For use in furniture/cupboards. Print in ABS or other hardwearing plastic. Join with rivets. The strut size when opened is 27cm. Open Source & Public Domain -…
With the help of biden templates, it is possible to recreate a large number of standardized characters on a technical drawing. PRINT SETTINGS:⠀ • Layer 0.15mm⠀ • 15% Gyroïde Infill⠀ • My PLA : Temp Tool 215 / Bed 60⠀ • No Support • Brim…
These two objects are non-marring feet or tip attachments that are placed on the tip of the Central Pneumatic 2-in-1 pneumatic air 18 Gauge stapler/brad nailer (SKU 68019, 61661, 63156 & 64269) and the Banks 18 Gauge Air Brad Nailer (SKU…
Fully functional replacement for metal fittings, tested up to ca. 1 bar. Comes in four versions, barbed, straight-long, straight-short, and 90° angular. Use with 6x1.5mm or 5x1mm O-rings. Can be tightened with a 7mm wrench, but don't pull…
Pneumatic connectors/fittings clips These pneumatic connectors/fittings clips are designed for use with the Ender3 extruder (PC4-M10, KJH04-M6 and PC4-M6). The design is parametric, allowing the clip to be adjusted to fit various…
This is a remix of ub3rmario 's Sovol SV06 Minimal Filament Guide model. It's the same basic idea but instead of leaving the filament to move from side to side in the original filament guide this approach incorporates a PC4-M10 fitting…
Aus dem Model von Murphy345 habe ich die Schraube für den PC4-M10 Connector genommen und das passende Gegenstück, bzw. den passenden Einsatz für den CrealitySpacePi Filamenttrockner entworfen, da ich die Mutter aus dem eigentlichen Modell…
Pneumatic network actuators (PneuNet) are a type of soft robotic actuator composed of a network of channels and chambers embedded in an elastomer. The design was originally created by the Whitesides Research Group at Harvard. I modelled a…
(USE THE PRINT FILES; MODEL FILE SIZES ARE INACCURATE) Made this model for a 3D Modeling class. Used for cosplay.
This spacer clip stops your office chair from sinking, when the pneumatic cylinder is broken. 2015-05-25 - Added ChairFix2.scad which has a secondary clip to stop it popping off, if your chair like mine, has a slightly conical outer…
This build features a large LEGO Technic pneumatic air tank fixed to a 15-hole beam. The tank is 13 cm long, 3.5 cm high, and 2.8 cm wide.
Open Change Parameters in 360 to change nut width and height and use the time line to make adjustment to the thread. Nut is 12mm wide with a 1/8 BSP pipe thread
This is a cap to go over the end of a 1/4 inch NPT fitting on any of your pneumatic tools. I used PETG. I haven't tried PLA, but I don't believe it would be flexible enough for this design. The collar is just flexible enough with the…
Pneu et jante de F1 18 pouces de 2022. La jante est découpée en 2 parties pour faciliter l'assemblage sur le pneu. Je l'ai imprimé en résine avec un Elegoo Saturn et résine Sunlu washable. La marque sur le pneu est modélisée. Print…
A very simple air powered engraving handle... but it works! Shaun Hughes on Youtube https://www.youtube.com/user/express375 pioneered making really simple air-powered engravers using an electric tyre pump as the pneumatic engery source.…
**USE AT YOUR OWN RISK! I am not responsible for any use of this item. You can cause thousands of dollars in water damage, get serious burns, or be electrocuted when working around water heaters. This is ONLY for people with experience…
Pneu et jante F1 avec un socle Print Settings Printer Brand: Zortrax Printer: M200 Rafts: Yes Supports: Yes Resolution: 0,14 Infill: 0,20 Filament: SOVB ABS Noir Category: Vehicles
Instructions printing I'd recommend printing the Lower housing and the the cap with 0.9 flow, this seems to help with the threads this model is designed to be printed with .2mm layers (also first layer) I had some trouble printing this…
This fitting replaces the exit fittings that come with the repbox to add PC4-M10 pneumatic couplings to connect PTFE tubes directly to the repbox. This is a remix that compared to the original: extends the passthrough at the top to fix a…
A little bit simplified models of pneumatic car jacks in deflated position. I tried to keep dimensions of the real ones, but to make it printable I had to be creative in some parts. It will look good in a corner of car workshop diorama…
The new fittings/connectors for the Repkord Repbox version 1.5 are very unreliable. Not only are the connector threads insecure but the fittings barely hold on to 4mm ptfe tubing without serious force. Additionally if you have the sealed…
Tripple splitter Bambulab with PC4-M10 pneumatic connectors
The model has a width of 4 mm which should be enough for standard PTFE fittings i printed this in TPU at .2 layer height and 15% infill
Small pneumatic tool hanger. There's a slope in the slot that holds the connector as well as a tilt to the model itself as you attach it to the wall. Some other models seemed a bit like the tool would slip out. This feels much more secure.
Simple adapter to use a M10x1.0 pneumatic fitting on the outgoing side of a BMG extruder. The standard PTFE tube clamp was really loose on my extruder. Needed parts: M10x1.0 pneumatic fitting Print Settings Printer Brand: Creality…
The M-45 motor is a versatile pneumatic stepper motor with up to 0.5 Nm torque, size 45 mm x 40 mm and thickness only 15 mm. It is constructed as a rotational two-cylinder pneumatic stepper motor with Lego Technic-compatible shaft. An…
Author : Zcubed https://www.prusaprinters.org/prints/68407-repbox-15-fittings-for-pc4-m10-pneumatic-couplings Minor modification to facilitate filament insertion. 07-02-2025 - Add version for PC4M8 connector
Intro This valve is a 4/2-way pneumatic valve which can be pneumatically or mechanically operated. The valve can also be used as an actuator to move other things. The valve has six pneumatic ports. The topmost two are for actuating the…
Organizer for this socket set
Yo la commu 👌 Voici un petit outil bien utile, simple d'utilisation et d'impression ! Une petite jauge de profondeur pour contrôler l'usure des pneux de vos voitures. Impressions simple et rapide, ne consomme que quelques grammes de…
This I made in blender so I can use a PTFE tube for the SV08 for filament input aswell, also I made a bracket what places the filament runout sensor to the place of the filament spool holder. Swap the stock screw of the filament sensor to…
Pour faciliter la construction de https://www.printables.com/fr/model/417978-fusee-hydropneumatique, améliorer ses performances et le taux de fiabilité, quelques modifications. - Allégement de la coiffe 66g → 40g - Impression du ressort…
This is an upgrade for you Prusa Mini to use M10 pneumatic fittings with the existing brass threaded fitting on the hotend and extruder. The exterior of the coupler is hexagonal which will allow for a wrench to help seat it against the…
This is a Bowden Tube coupler which uses (2) PC4-M10 pneumatic fittings on both ends. I designed it so I could easily open up the tube which goes into my printer enclosure and connects to my BMG extruder. I gonna see if I can integrate a…
Označovače pneumatík - čiapočky. Označenie pozície pneumatiky na aute pri ich výmene z letnej na zimnú sadu a naopak + čiapočky dvoch prémiových značiek.
basically I remixed this for my drybox, you connect the valve from the outside and from the inside it acts like a nut securing the valve but also provide a dust filter.
Turn PET soda bottles or Sigg water bottles into air tanks for fischertechnik pneumatic applications. Both kinds of bottles are suited for compressed air up to at least 1 bar, the Sigg metal bottles are perfect for vacuums. The PET…
This model is compatible with the lego system.
This Remix allows a M6 nut to slot in the clip, for threading a PTFE coupler.
Remixed For two 10mm x 2.65mm round magnets. Center fillet was not working in Rhino, so I just lofted a surface. I printed this in PLA with the suggested settings. I had to clean out the X1 side a bit. I'm not sure if it was filament from…
Wall bracket for Parkside PDT 40 D3 pneumatic stapler and staple box. If you like my designs give me like and share. If you like them a lot invite me to a coffee. https://www.buymeacoffee.com/kjbturok…
Filament guide adapter for a 30° angle for dry boxes, suitable for pneumatic quick adapters 4 mm (M10x1 & 1/8-28). This adapter is ideal for dry boxes, e.g. Ikea Samla etc., to ensure the correct angle outlet to the printers and to…
Voir le remix ; https://www.printables.com/fr/model/425105-fusee-a-eau-hydropneumatiquewater-rocket La fabrication et le lancement de fusées à eau est une activité facile et peu onéreuse . J'utilisais, jadis, exclusivement des bouteilles…
I used these to help improve filament loading in my filament enclosure (see pictures). My set up might be fairly specific but other may find other uses for these. The Cabinet is an Ikea Platsa 60x40cm wall mounted. As it turns out the…
didn’t find a cheap adapter so I made one. To use with 8mm pneumatic like this: https://amzn.eu/d/0fq8IZU just use hot water to heat up the tube for like 10 seconds and push over smaller end. it should be watertight once cooled down. If…
M6 pneumatic connectors mount for Filament box or printer enclosure. Printing instruction: Filament type: PETG, ASA or ABS Layer height: 0.2mm Infill: 30% Assembly instructions Drill a 12mm hole into your enclosure to fit the thread if…
Français en dessous :) __________________________________________ With this part you can have a neat and sturdy filament entry for your Ikea Lack enclosure.…
In this viedeo I build a pneumatically driven linear generator. You could blow the exhaust air from pneumatic systems into a generator. This would recover some energy. Compressed air is expensive. The pneumatic linear generator is not…
Custom Socket organizer with labels. Printed on the X1 Carbon in ABS, would be fine with PLA as well. Made Specifically for this set
Introducing the Parkside Pneumatic Accessories Wall Holder : because your garage deserves better than the “random pile of shame” in the corner. This sleek, no-nonsense wall mount is custom-built for the Parkside air compressor and its…
Pneumatic fitting 6 inside and 10mm outside radious silicon tube with M14 thread. It holds the tube pretty solid.
Socket holder for the 17pc Olsa Tools Stubby Impact 8-24mm 3/8dr set. Should also fit the Astro and Husky rebrands.
I made this Cable Comb to better organize my pneumatic system for my Midterm test. It also allows for quick changes and fast setup due to the clip design. It became very popular among my peers, so I decided to share it. The hole distance…
I misplaced the cap that connects to the extractor to the tube after I drained the oil once, so I decided to model a replacement. Hopefully someone else finds this useful! This piece is for the Hold Industries Pneumatic Air Operated Fluid…
Motivation I wanted to provide a continuous PTFE tube connection from my Polymaker PolyDryer Storage Box to my Prusa CORE One. Solution Design and print a custom adapter and nut to accept a pneumatic fitting for a PTFE tube that achieves…
I remixed the model from LayersFarm to fit a M6 pneumatic connector instead of M10. It's the model for 4x2.75mm magnets. Edit 8/8/2023: Fixed messed up internal geometry thanks to https://www.printables.com/@aonomus
