Counting matching models…
Inspired by the design on tinkercad by örjan https://www.tinkercad.com/things/ejnXN5An6ae And by the design by Polestar itself for a protective snow cover for the chargepoint I designed this. The portrusion is meant to keep snow mostly…
I had this great idea to create some accessories for the excellent Dummy 13 model. Well about half way through I realized someone had already beaten me to it (see https://www.printables.com/model/649568-ski-set and…
Battle stringiness by enhancing retraction and/or wipe, or eliminating Z-hop. At the end of the day, a good quality filament or a very dry one will just not string. The two white prints in the picture are simply befor and after a spool…
+ detect thin walls + 2/3 perimeters + 10% infill Double cupholdeer and arm rest support for the Polestar 2. Cupholders fits 330ml cans and macdonalds cups. At least here in europe :) Built so the armrest can extend over the cupholder.…
Three stackable moss pole styles and base Each pole is 200mm tall. Print with a brim Some support may be required
Just a quick hanger/clip for grow tent poles (16mm, most common size). Works well for trellis support, and LST anchoring. Recommend adjusting print height and fill based on strength needs (whatever you're tying down / supporting) These…
Attach Ski Poles together for better transport
I leave my flag out in front of my house all year. The only time it comes down is before a huge storm or tornado warnings. But living in the Midwest, storms can form quickly, and without much warning (especially in the spring.) Twice over…
The Polestar 2 Activity Key is designed to be disposable. However, if you do not want to throw it away and buy a replacement when the sealed battery runs out (~2 years), it is possible to extract the key electronics, replace the battery…
The Parts are split into bodies which allows for easier printing without support. Parts are labeled A,B and C which are meant to be glued together. Be careful to glue them in the correct orientation. There is a Fusion 360 file attached so…
My custom version of the Polestar 2 charge cover, optimised to fit smaller 22x22 cm print beds like the Elegoo Neptune 4. The supplied .stl file does not contain the Polestar logo due to copyright reasons.
Improved poles for Crochet Granny Block Better printability Tight fit
There is two models: one for adults ( 16 mm diameter) and one for kids (13 mm diameter). Print in PETG or other deformation-resistant material (avoid PLA). Use supports between the top and the bottom clips.
NFS Heat Polestar, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for better…
A trash can modeled to fit in the center console of the Polestar 4. It has four 9mm diameter holes in the back to press fit / glue in magnets. It prints in 3 parts: Main trash can Lid bottom Lid top You can also only print the main trash…
The Polestar 2 parcel shelf has, in my humble opinion, two design flaws. When you remove the shelf, a string can fall through its hole easily and you can lose it on the ground without realizing it. The string is strongly tied with no…
Update Available A new and improved V2 version of this Tent Pole Hook & Eyelet system is now available. V2 includes: Improved locking mechanism Redesigned geometry Stronger and cleaner shapes 100% support-free printing Better everyday…
The 10th addition to my logo lineup, the Polestar Logo.
This is the Original file. Contact my Email at [email protected] if you would like modifications or permutations of the design to your specific needs. Despite the claims of Spencer3D on Ebay to the contrary. I also provide printing,…
I remixed this from: https://www.printables.com/model/90514-polestar-2-charger-snow-cover so like that it fits north american models.
This is a bin for the front part of the central console in the Polestar 2. Handy to keep your loose change, for example.
Simple clip to be used as temporary storage for your hiking poles when you need both of your hands free during a walk. Two models available one for full size 25mm strap, and B model for narrower shoulder strap, only difference is the slot…
Very simple central console horizontal divider Printed in PETG
Polestar 4 Charging Cradle Retaining Lip – Keep Your Phone Secure! 📱🚗 Does your mobile phone slide out of the charging cradle in your Polestar 4 whenever you accelerate a bit too enthusiastically? You’re not alone! This retaining lip…
I remixed this to fit 22mm grow tent poles which is commonly used in AC Infinity tents (among others). I printed this in PETG and it uses roughly 5.3grams of filament .20 Walls: 3 15% Gyroid
The battery in my key was dying, so rather than buying a new key, I cut open the shell and replaced the battery. I didn't really want to glue back together the original mangle shell, so I modeled a version that snaps closed. It's no…
This reduce the chance of snow building up around the charging plug. Printed mine in PETG-CF.
Parametrized Ski Clip to transport skis and poles together, slightly over engineered ;-) Completely parametrized, therefore works for a wide variability of skis and poles, even elliptic poles and asymmetric skis (different width/thickness…
The 4 parts consist of the basic shape and the 3 shapes that can be integrated into it. Supports must be printed for the radius files I used PLA This model fits into the Polestar 4 middle console The photos are the individual parts and…
Holder for Ski Poles Printed without supports on Prusa i3 MK2.5 In PLA
A basic organizer for the top of the Polestar 3 armrest compartment. The armrest compartment of the Polestar 3 is quite large but that is due to its depth. This means that it can easily hold longer items, but who does that in the armrest…
If you have ever maintained a swimming pool you will be familiar with this type of clip. I needed replacements and ended up designing my own. My priorities were durability and printability. I carefully chose the dimensions to make sure my…
I have designed a holder for the Polestar 4 where a tablet can be attached to the rear seat. Unfortunately, it's a bit tricky to print because of the ball. Any holder from the trade for a ball size of 16.8 cm (is almost standard) can be…
Overview : I have several painter’s poles that adjust to various lengths. I’ve developed a number of attachments for them, but the ACME thread definitions in Fusion 360 are not compatible with the ¾” (075) x 5 tpi definition used for…
I wanted an Air Tag holder for my keyring with a Polestar logo. After being dissatisfied with many clip-together models, I made one that is screw-on – Very secure! Strong, heavy duty, rugged. The white part of the Tag protrudes slightly…
I liked JamesThePrinter 's design, but I wanted a little versatility. So, I reduced the base diameter from 135mm to 100mm, and extended the pole to be taller. I have provided many options to customize your base and pole sizes.…
Rubber tip caps for «Nordic Walking» poles. To be printed with soft material (TPU, NinjaFlex, …).
Support Ring for Amateur-Radio antenna poles. Our working title was "UFO-Dish". It's purpose is to fix and stabilize the fiberglass tower during use. We tested serveral copys and use them during fieldday-events. There're versions with…
Retention cradle to keep a phone in the centre of the charging pad and to prevent unwanted rear ejection under acceleration. Should fit any current 'non-Max' iPhone and any 'normal' Android handset. Max dimensions 79mm x 160mm
Polestar 4 Charging Cradle Retaining Lip – Large Version for Big Phones! 📱🚗 Does your mobile phone slide out of the charging cradle in your Polestar 4 whenever you accelerate a bit too enthusiastically? You’re not alone! This…
Never saw much use for the cup holder in the middle console of my Polestar2. So I decided to design a piece to organize stuff I use and need more frequently. There's room for: 4 charge cards A coin for shopping cards. (modelled after a 2…
Download the required hook from here: https://cults3d.com/en/3d-model/various/polestar-2-cup-holder-mroek
There are four sizes. Small, for TrueSDX power cable, Small twin, for Yaesu FT-817 or similar size cord, 12 gauge and 14 gauge twin power cords. They are in half shells, so print two of the size you need. They take M4x12mm screws.…
Replacement clutch for trekking or Nordic poles for poles with a diameter of 16 and 18 mm You can print this useful tool if it breaks or gets lost For strength, increase the number of perimeters to 4
A few minor changes was made to the original model. When i first made the cupholder, I had very thin walls in some areas. One guy had put up some pictures of the location. I made the walls a bit thicker which fixed this issue. Made the…
Update: 12/21/2024 Added a little extra room to the latching part of the case. Previously it was difficult to get the key tag in and out. You may need to still file down the bump if it is still too difficult to remove. The key tag that…
This pool pole holder is meant to help you organize pool pole based accessories vertically on a deck pole. It has spaced out holders for 3 poles and fits tightly to a deck pole. Note Before Printing: Please measure your deck post and pole…
This fits my MLOK cage I designed for my radio. It will relocate a pair of Anderson Powerpole connectors. Related Models Icom IC-2350H Cage - https://www.printables.com/model/1246431-icom-ic-2350h-cage MLok Relocation Bracket BNC -…
Фиксатор лыжных палок: Ø 16 мм, Ø 14 мм, Ø 10 мм.
A very very simple remix of a model that's already itself a remix. Print as oriented with your chosen infill; 100% infill makes for very strong pegs. You'll have to print the original model in order to make use of this model.
Info Simple clip with 16mm diameter (I also made clip with hole for ruber - as fuse). I also made split pin with 4 x 20 mm. Note: Reducing the clip size in the slicer should be fine to use on a smaller diameter. (not tested) Print…
This hiking pole cap was made to fit the black diamond distance FLZ hiking poles and replace lost standard rubber tips such as these decathlon poles. The cap inner diameter is 10.1mm and the hole height is 28mm with a snug fit on the…
This is a 17mm ball head mount for the Polestar 2 car's central control. It can be easily inserted into the ball head base without the need for adhesive, making it quite stable. The standard 17mm ball head allows for easy connection to…
Supports 20mm Installation PVC Tubes on a common 16.1mm growtent pole. Made this to stop my tent from getting sucked together by exhaust fan pressure Printed with 0.4 Nozzle 0,2 Layerheight Polymaker ASA No Support 100% Infill Please be…
I have designed a key and mobile phone holder as a cup holder for the Polestar 4. This has space in the smaller front holder, whereby the mobile phone is still clearly visible in this position ;-). Have fun
selfie stick ski pole mount (insta360) with 5 mm nuts and compatibility with ski poles with triangular section. Print with PETG, ABS or similar materials. V2 reinforced. Included stl: clamp body Collet and cover must be downloaded from…
I replaced the soldered battery with a battery holder for CR2032
when handeling those heavy lead acis batteries it comes handy to cover the poles to protect against short circuits.
Got sick of Setting up my annex on my camper trailer. Came up with this to put on the end of poles. Join poles together and have them on a hinge. Have included different types as I'm not sure which way I'm planning on going but they are…
Parametric Cable Holders for Various Diameter of Poles You can adjust: Pole Diameter Holder Thickness Holder Height Width and Depth of the Cable Holding Section The Chord Length (Entrance Size) and Tightness (Tolerance between the Pole…
The idea for this GoPro-Mount was born while leading dives and me wanting to take video backwards to get footage of my buddy behind me. This lead to this mount for a diving tank (regular 80cuft aluminium or 12l steel) and to prevent…
This clip mounts onto a shoulder strap of a backpack and can hold two trekking poles to allow you to free your hands for a while - ex. when you want to take a photo Works with shoulder straps up to 80mm wide. Prints in place, best with…
This is a fixture clip for easy and quick mounting of an LED strip to a pipe, like a camping pavillion. This also allows for easy removal of the strip before teardown without having to fiddle around with cutting tape off of a pole. It's…
This is a pool post fence bracket created with Fusion 360 which is very useful if you have a metal fence with two top 25mm x 25mm tracs separated by 124mm. The thickness is designed in such a way that the bracket can be installed on both…
The little rubber bung thing on the end of the parcel shelf lace snapped when it got caught on something in the boot ( trunk ). I designed this little plug so that the lace can be threaded through it then shoved back in the rubber bung,…
Polestar Keychain w/ Logo, hollow design Bicolor revommended
A split ring meant to be place at the base of a lally type support pole. It can be finished with sealant and/or paint.
Universal hook for Biltema / Angel-Cache fishing rods. Unlike standard screw-in or glued hooks, it requires no modification of the rod. It is intended for a 7–8 m carbon-fibre telescopic fishing rod with the last segment removed. The hook…
ECO-WORTHY 12V 8Ah 96Wh LiFePO4 Battery with F2 terminals on 45mm center “SLA” form factor : 65.5mm(d) x 151mm(w) x 93mm(h) [ Need to scale for different batteries ; now includes: original ECO-WORTHY model with terminals set at 45mm…
This tip protection is used when your polls are traveling in your duffle or suitcase. Its meant to protect the duffle or suitcase from tarring or puncturing. This tip protection is made to be threaded onto poll.
If, like me, you are a little clumsy and, for whatever reason, pull too hard on the chair leg and end up breaking the plastic part, you will find a replacement part here to reassemble and use the chair. Fits the Helinox chairs with the…
The alignment pins are on the small side and meant for use with glue or epoxy. If you want a more snug press fit, scale up a couple percent!
Komperdell kompatibler Teller für Stöcke Ich empfehle die Teller aus TPU zu drucken
An in-line fuse block, fusing both positive & negative lines, for circuits using Anderson Powerpole connectors. 0.25" female spade terminals are used for the fuse holders. This model uses standard bladed fuses, not mini. Short lengths of…
Polestar 4 Dashboard Holder for Saphe Drive Mini 🚗✨ Keep your Saphe Drive Mini securely in place with this custom-designed dashboard holder made specifically for the Polestar 4 . It fits perfectly between the ambient lighting and the…
Wall mounted. 100% infill. Use screws.
Description: I needed a simple way to give cuttings and small plants more light in a crowded tent, so I designed this clip-on corner shelf. It snaps onto standard 16mm tent poles and holds a 4" pot securely, turning unused corner space…
A replacement Snow plate for ski poles. Is plugged in the pole. Print without supports. Print settings: 0.20mm speed 50% infill no supports no edge Thanks for download and like. Leo
Langlauf Nordic Walking Ski Poles Holder / Clamp V3 - D15mm / D12mm - up to 47mm V2 - D16mm / D13mm - up to 50mm PETG is maybe better for cold wetter and more flexible.
Pretty simple, but functional! Originally, I looked for an adapter that someone else has made. I'm very new at this printing adventure, so I took it upon myself to start my journey to create a functional part I will use. This adapter…
The rubber caps of my hiking poles always got lost easily. Printed in TPU, these replacement caps fit tight and until today sustained well more than a year of heavy duty hiking. Suitable for pole tips with a diameter between 12mm - 15mm.
Telegraph poles for wargaming, to decorate your worn torn tabletop game. Made for games like Fallout, Mutants: Zone Wars, This is not a test, Last Days, Zona Alfa and others. Standing and fallen. Find all my building on Cult3D: TedGhast…
tip bumper for Leki Sherpa poles
Polestar 4 Charging/Credit Card Holder – 5 Slots (Fits Driver's Door Side Storage) Looking for a neat and organized way to store your charging cards or credit cards in your Polestar 4? This custom-designed 5-slot card holder fits in the…
Polestar (Volvo) Waterproof Small Key Replaceable Shell, 3D Printed. When the battery of the small key fails, you can open the shell and replace the battery yourself. The original battery can be directly installed in the replacement…
Telescoping fibre-glass poles were originally designed as fishing rods, but they are also used by radio amateurs to erect antennas in the field. A popular brand of these poles was sold by Lambdahalbe in Germany. Owners of such a pole…
Polestar Keychain. Made it for my dad cause he drives a Polestar 2 so why not upload it for other people to use.
Clip for Black Diamond Trail Trekking Poles (16 mm) A practical clip designed to hold together a pair of Black Diamond Trail trekking poles or any other poles with a 16 mm diameter . It makes transport and storage easier by keeping the…
Remix of the great model from Peter H with adapted dimensions to replace the original feet on the Helinox chairs with 17.4mm poles. In my case they are used on my Swivel chair , but according to Helinox's description they should also fit…
Uploading this per request of some other Polestar 2 owners. I didn't want to have to carry along the fairly ugly standard key that came with the car, so I made this holder to store the board from the activity key in my Ridge wallet. This…
I printed many 22mm grow tent pole clamps , but did not want to use a bolt and nut or zip tie to secure the clamps to the poles. Instead, I designed a pin that can secure the clamps to the poles. The pin has a wing to help turn the pin…
Print in PETG with 3 or 4 layers.
This is a holder for 16 mm trekking poles. Because there are many diffrent poles widths and many diffrent backpacks, i include step and free cad files.
This is a protective case for the D-Planet 5A DC-DC Adjustable Buck Converter 4~38v to 1.25-36v Step Down Power Module. The case snaps together and houses Anderson PowerPole connectors on either side. Use the slot with a small screwdriver…
This is a four connector extension cord for power poles. This is the head piece for the four connector end, the single connector end uses my already existing single power poles shell further down my page. I'll link it at the end of this…
Simple design can be adapted in slicer to required dimensions. Designed for 14mm radius and 70mm height, can be scaled in one direction or all. Simple to print, can be printed without support or with organic one for better inner quality.
I still had some old fiberglass tent poles at home – a great material for making fishing rod holders. The thread ist the standard BSF 3/8 threaded, as used by bite indicators. So I designed an adapter that can easily be glued onto a…
I've always been concerned while transporting my hiking sticks about the possibility of the sharp and hard tip of my sticks to hurt somobody or something. while strapped to your backpack, on the trunk of your car or inside your wardrobe…
Re-implemented the ski holder to be customizable, but w/o a metal latch (it doesn't look necessary to me). If two of these are used, ski poles can be used as a handle for the assembled thing. Upd1: made it wider to resist ski falling out…
Custom inserts for the Polestar 4 door bins to keep your items organized and secure. Features: Cup Holder: Fits 2 x 33cl cans. Keeps them upright and rattle-free while driving. Divider: Organizes the large door pocket into smaller…
