Counting matching models…
Subscribe Now! Time-lapse print video : https://youtu.be/6LVUM_R6hHY Remix to support free and printed. Subscribe to find out more support free 4K Time-lapse video: Subscribe Now! Addiction to 3D Printing? Watch these time-lapse!…
Uses the ancient method of Air Layering which is about growing roots right onto the branches to replicate your existing plants and produce a new one. It works on both indoor and outdoor plants. The propagation pods are safe for the mother…
This is a 1:32 scale model of the only crewed spacecraft to successfully land on the moon. I’ve spent 5 years carefully researching the LM from the inside-out, consulting thousands of reference photos and technical drawings. Although this…
Trollface High and Low Poly Versions.
Silenziatore modulare che può fare sia da silenziatore vero e proprio, sia da prolunga canna... Esternamente è 35mm di ø, ed è lungo 80mm. Il vano interno è 30mm di ø ed è lungo 70mm. Adatto per essere inserito in repliche con handguard…
DESCRIPTION An extra portable wallet that I designed which is easy to print, stylish and built like a rock. Dimensionally it is almost the same height and length as a credit card. Approximately 1.5cm thick. Storage: Holds 5 cards. It also…
https://apolloautomation.com/products/msr-2 The ball mount is a remix of: https://www.thingiverse.com/thing:67911 from Gyrobot
This is a 1:60 scale version of the NASA Crawler that transported the Saturn V and LUT, space shuttle and now the Artemis from the Vehicle Assembly Building to the launch pad. You can build the simpler Saturn V version or the newer space…
Overview: This model was inspired by the Farscape1 LUT. New parts have been made to make it exact per the original NASA 75M-05120 and 75M-05121 drawings. The farscape1 model was pretty sparse so many additional parts are provided by…
Silenziatore modulare studiato per essere un silenziatore effettivo con 7 dissipatori di suono. Rende il suono emesso di fronte alla replica pesantemente otturato, trasformando gli acuti e i suoni alti in bassi. soprattutto è grosso e…
This is only possible thanks to all of my present and past patreon supporter. So a huge shout-out to them!!! ------ Full model is on my https://patreon.com/squirrelf3d - linear rail version - many supported hotend ( list here ) - some…
Daphne and Apollo In ancient Greek mythology, Daphne was a beautiful nymph who caught the eye of Apollo, the god of light, music, and prophecy. The story between these two characters is filled with love, desire, transformation, and…
Supports: Yes Raft: Doesn't matter Infill: 15%
Low Polly Lambo Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
" I N F I L T R A T I V -- S C U L P T U R E S " Open Source Art Project / Non Commercial / No Sale Ready to print: APOLLO ASTRONAUT // DETAILED SPACE SUIT Figure Scale ca. 1:10 / 19cm Artist website: http://www.grueter.com Other…
Due to the 1:60 scale of this model it is rather large, almost 32" x 27", the model consists of a wooden box that is skinned by 3D printed parts. Note that there are decals in the Other Files section. These work well when printed on vinyl…
This is one of the trucks on the Apollo crawler that transported the Saturn V and the Launch-Umbilical Tower from the Vehicle Assembly Building to the launch pad. Each truck was driven by four electric motors. This model is based on a…
Overview: This model was inspired by the farscape1 LUT. New parts have been made to make it exact per the original NASA 75M-05120 and 75M-05121 drawings. The farscape1 model was pretty sparse so many additional parts are provided by…
a highly detailed model of the Apollo 11 lunar lander with a scale of 1:44, easy to assemble and print with any printer Lander the final dimensions of the lander are 15,97 cm by 15,97 cm by 14.69 cm the lander has 36 pieces the printing…
This Apollo model was made by Revopoint POP. If you want to get more models like it, please try to use 3D scanner POP: https://bit.ly/3xb37c3 Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200…
Apollo 11 in 3 parts (shell, inside, top) Apollo11.stl is the shell+inside joined together without top. Apollowhole is just for viewing. Cleaned, solidified, and made printable from Smithsonian 3d scan found on sketchfab. Category:…
riduttori di suono… semplici, leggeri, rapidi nella stampa, efficaci nel ridurre il suono emesso dalla tua ASG all'interno di APOLLO 40mm vanno inseriti 7 riduttori di suono. buon divertimento. MATERIALE: ECO-SMART PRINTOLOGIST
The Apollo’s Gesture – Classical Marble Statue brings the timeless beauty of Greek and Roman art into modern spaces. Inspired by the elegance of Apollo, god of light and the arts, this statue depicts a heroic pose with an upward gesture…
Bollard key with longer handle and triangular insert. For more comfortable use on bollards with jammed mechanism. Print in PETG or ABS for good durability. Thanks to rflrkn for pointing out that the initial print file had too few infill.…
If you like what I do here, come visit my (German) Discord or my Facebook group. Discord: MX-creations Facebook: 3D printed Grow Tools & Accesories - free .stl designed for me and shared with u, works great ;) for the following guide i…
This model consists of the flooring parts for the Apollo Launcher / Umbilical Tower used to launch the Saturn V rocket. This is part of the Apollo Umbilical Tower model. See the parts spreadsheet of that model for a complete list of parts…
This model consists of the stair portions of the Apollo Launcher / Umbilical Tower used to launch the Saturn V rocket. This is part of the Apollo Umbilical Tower model. See the parts spreadsheet of that model for a complete list of parts…
This is part of the Apollo Crawler Transporter. The arms attach to the side of the main structure and hold the trucks. Four arms are required. Note: The FlagDecal and NASASymbolDecal png files are used to print on vinyl transfer paper to…
This is a recreation of a toggle switch guard used on the many control panels in the Apollo space capsule. I have also included two variations of the switch head, one with hole and one without. I recommend using a resin printer for the…
This model is larger than most, if not all of the plastic models. The scale was chosen so it woud fit on a bookshelf. The ascent and descent stage are held together using 6x3mm magnets. The front of the ascent stage is removable, again…
The structural end detail contains a fuel tank, two radiators, flooring and various support columns. The parts list is for one end structure, two are required. Note: The FuelTankDecals and HazardDecals files can be printed on a vinyl…
This consists of the vertical and horizontal cable trays of the Apollo . These are part of the larger Apollo Umbilical Tower model. As each floor is added, the horizontal cable trays as well as the lights should be added to the underside…
This is the center structure details of the Apollo Crawler. Note that the two sides are not identical. One of the sides has a control room and the other side has radiator vents. Note that the Side 2 Skin is the same for Side 4 as well.…
This model consists of the Colby crane that sits on top of the LUT. This are part of the larger Apollo Umbilical Tower model. This model is made to be automated with two readily available stepper motors and two Arduino Nano Everys. If you…
This is a model of the cabs on the Apollo crawler. There are two seats and a console that need to be painted something other than the light grey. There is also an A/C window unit on the back wall that should have the rear and side panels…
A low poly rendition of the classic dodge ram hood ornament. Unsure what all dodges it will fit, but I know it will at least fit ‘06 - ’10 model years of Dodge Charger. To mount you just need to glue a 1" bolt into the hexagonal hole on…
This consists of the Swing Arm #1 that attach Umbilical Tower hoses to the Saturn V rocket . This are part of the larger Apollo Umbilical Tower model. Notice that when adding these parts, some parts are the same from level to level.…
This model consists of the equipment for the Apollo Launcher / Umbilical Tower used to launch the Saturn V rocket. This is part of the Apollo Umbilical Tower model. See the parts spreadsheet of that model for a complete list of parts by…
Wireframe Apollo Astronaut Support Free Remix Subscribe Now! Remix to support free and printed. Wireframe Version: Solid Version here https://www.thingiverse.com/thing:4615496 : Category: Sculptures
The Apollo Automation R PRO-1 PoE mmWave Multisensor (LD2450 and additional LD2412 add-on option) is our most advanced presence sensor. Designed for power, precision, and reliability, the R PRO-1 is a compact PoE mmWave sensor built for…
https://apolloautomation.com/products/mtr-1 The ball mount is a remix of: https://www.thingiverse.com/thing:67911 from Gyrobot
Simple box for casting votes, polls, or collecting suggestions. Eyelets allow lid to be locked using a U-lock or zipties. Box base is 17.5cm x 13cm, and 17.5cm tall. The slit in the lid is 1cm x 14.5cm. Box needs to be printed bottom…
This model consists of the Level 0-30 structure portion of the Apollo Launcher / Umbilical Tower used to launch the Saturn V rocket. This is part of the Apollo Umbilical Tower model. See the parts spreadsheet of that model for a complete…
This consists of the external piping that runs up side 2 of the Umbilical Tower. These are part of the larger Apollo Umbilical Tower model. These pipes include the water and Environmental Control Ducts (ECS) pipes. Notice that when adding…
This model consists of the railing portions of the Apollo Launcher / Umbilical Tower used to launch the Saturn V rocket. This is part of the Apollo Umbilical Tower model. See the parts spreadsheet of that model for a complete list of…
The LEGO Saturn V is an awesome model to build and showcase. Unfortunately I do not have the shelf space, so I designed these mounts to hang it on the wall at a 45 degree angle. You can print multiple sets of these if you want to separate…
This consists of the Swing Arm #9 that attach Umbilical Tower hoses to the Saturn V rocket . This are part of the larger Apollo Umbilical Tower model. Notice that when adding these parts, some parts are the same from level to level.…
This consists of the external piping that runs up side 3 of the Umbilical Tower. These are part of the larger Apollo Umbilical Tower model. These pipes include the LOX and LH2 pipes. The LH2 pipes are the three with the yellow bands. The…
This model consists of the elevator portion of the Apollo Launcher / Umbilical Tower used to launch the Saturn V rocket. This is part of the Apollo Umbilical Tower model. See the parts spreadsheet of that model for a complete list of…
This is part of the Apollo Crawler that transports the Saturn V. The walkways go all the way around the crawler. Below the walkways is a two tier cable tray. Notice that between the two cable trays I added some small black wire. Note:…
My Bosses-Boss threw me a 20 dollar bill and handed me the Apollo-11 5 OZ 50th Anniversary Coin and told me to make him a display for it. After about an hour I came up with this. Link to the coin…
This consists of the Swing Arm #1 that attach Umbilical Tower hoses to the Saturn V rocket . This are part of the larger Apollo Umbilical Tower model. Notice that when adding these parts, some parts are the same from level to level.…
This model consists of the machine room portion of the Apollo Launcher / Umbilical Tower used to launch the Saturn V rocket. This is part of the Apollo Umbilical Tower model. See the parts spreadsheet of that model for a complete list of…
Extension for the rear fender of the Apollo City / Trittbrett Fritz E-Scooter. Protects the rear suspension from getting dirty. Printed in whatever you like, add supports. See Pictures for print orientation! German Community Thread:…
This consists of the Swing Arm #2 that attach the Umbilical Tower hoses to the Saturn V rocket . These are part of the larger Apollo Umbilical Tower model. Notice that when adding these parts, some parts are the same from level to level.…
This model consists of the Lighs for the Apollo Launcher / Umbilical Tower used to launch the Saturn V rocket. This is part of the Apollo Umbilical Tower model. See the parts spreadsheet of that model for a complete list of parts by level…
This model consists of the Levels 60-380 structure portion of the Apollo Launcher / Umbilical Tower used to launch the Saturn V rocket. This is part of the Apollo Umbilical Tower model. See the parts spreadsheet of that model for a…
In-Place Upgrade for the front fender of the Apollo City / Trittbrett Fritz E-Scooter. Protects the front suspension from getting dirty. Printed in PLA, No supports, add brim. German Community Thread:…
This model consists of the Level 30-60 structure portion of the Apollo Launcher / Umbilical Tower used to launch the Saturn V rocket. This is part of the Apollo Umbilical Tower model. See the parts spreadsheet of that model for a complete…
juego de mesa y silla para para figuras Polly Pocket
This consists of the Swing Arm #3 that attach the Umbilical Tower hoses to the Saturn V rocket . These are part of the larger Apollo Umbilical Tower model. Notice that when adding these parts, some parts are the same from level to level.…
This consists of the Swing Arm #8 that attach Umbilical Tower hoses to the Saturn V rocket . This are part of the larger Apollo Umbilical Tower model. Notice that when adding these parts, some parts are the same from level to level.…
This consists of the external piping that runs up side 4 of the Umbilical Tower. These are part of the larger Apollo Umbilical Tower model. These pipes include the hydraulic pipes and cables. Notice that when adding these parts, some…
This consists of the Swing Arm #5 that attach Umbilical Tower hoses to the Saturn V rocket . This are part of the larger Apollo Umbilical Tower model. Notice that when adding these parts, some parts are the same from level to level.…
A model of the famous Apollo Command Module. Print with normal settings FDM or SLA. Please rate the model or give feedback!
This model consists of the mid-level structure for the Apollo Launcher / Umbilical Tower used to launch the Saturn V rocket. This is part of the Apollo Umbilical Tower model. See the parts spreadsheet of that model for a complete list of…
This consists of the Swing Arm #6 that attach Umbilical Tower hoses to the Saturn V rocket . This are part of the larger Apollo Umbilical Tower model. Notice that when adding these parts, some parts are the same from level to level.…
This consists of the external piping that runs up side 1 of the Umbilical Tower. These are part of the larger Apollo Umbilical Tower model. Notice that when adding these parts, some parts are the same from level to level. Higher levels…
This consists of the Swing Arm #7 that attach Umbilical Tower hoses to the Saturn V rocket . This are part of the larger Apollo Umbilical Tower model. Notice that when adding these parts, some parts are the same from level to level.…
This model consists of the two anemometers, the antenna and the antenna platform for the Apollo Launcher / Umbilical Tower used to launch the Saturn V rocket. This is part of the Apollo Umbilical Tower model. See the parts spreadsheet of…
This consists of the DRRS arm that stabilizes the Saturn V rocket . This are part of the larger Apollo Umbilical Tower model. Notice that when adding these parts, some parts are the same from level to level. Higher levels may use parts…
Detailed Figurative Study of an Apollo A7-L Spacesuit. Part of art projects "Infiltrative sculptures" and "Kunst im Eigenbau". NON COMERCIAL Post-Printing Category: Sculptures
This model consists of the cameras for the Apollo Launcher / Umbilical Tower used to launch the Saturn V rocket. This is part of the Apollo Umbilical Tower model. See the parts spreadsheet of that model for a complete list of parts by…
In order to save on filament to build farscape's MLP I created a set of skins which once printed are applied to a wooden box. Original model can be found here. https://www.thingiverse.com/thing:911891 These skins are sized to fit 220x220…
This is a remix from the Pollen press Remix by ScotchyScotch, I broke the shaft several time so i tried to make it stronger. Remix: https://www.thingiverse.com/thing:4770150 Original from Elfrizzy:…
(not so) To scale model of the real life building for “Los Pollos Hermanos” from Breaking Bad. Made in blender, printed at 0.20mm layer height with 10% infill. In total, it took about 20 hours to print everything. Notes: LPH_Full.stl has…
https://apolloautomation.com/products/air-1
On July 20th, 1969, the world felt just a little bit larger as Neil Armstrong and Buzz Aldrin set foot upon the lunar surface – the first humans to ever do so (only after leaving their friend Michael Collins alone in orbit about the…
¡Lleva la acción y la nostalgia de Fortnite del mundo digital al físico con esta exclusiva colección de sprites 3D! Diseñados con un estilo pixel art único en 3D, estos modelos capturan la esencia de tus personajes y objetos favoritos del…
Pollen grains from the 3D Printed Pollen Project by Oliver Wilson. https://3dpollenproject.wixsite.com/main I removed the species names on the files so that they are not identifiable by the file name. This way students who are looking at…
The holder just barely fits on the mk3. Print two wall pieces, scaled to around 93%, on their side for strength. Feel free to experiment with the scaling, 93 worked well for me. There is some droop, but I wanted it slightly sloped, so it…
Mewtwo Pokémon low polly. Credit to my friend Michael Edewaard for the 3d modeling skills.
A requested foregrip design from our community poll. Hardware: 2x m4 30mm bolts (Pan head or button head are best) 2x m4 nuts Thank you, all who responded to our poll. We will be creating more soon. If you would like to participate in the…
A simple pollen scraper. This mini shovel is easy to use and the perfect size for your tobacco or herb grinder. Recommended to use a rigid material such as PLA+, PETG, ABS, PC etc. Print on your highest resolution as this is a very small…
A modified Clark-Cortez motorhome was used to transport Apollo-era crews to the launch pad, beginning with Apollo 7 in 1967 and continuing through the Apollo-Soyuz launch in 1975. This vehicle remained in use through STS-6, and is now on…
Apollo 11 50th aniversary. Color change plate. Print instructions colors: 1- black 2- white 3- blue 4- yellow 5- brown
These Support Interfaces are used in conjunction with my 1/60th Scale Apollo Saturn V MLP skin set.
THIS IS A WORK IN PROGRESS - ALL STLs ARE COMPLETE AND FIT, BUT SOFTWARE IS INCOMPLETE. [UPDATE 29/06/2024 - BOM Updated as I'd marked the PI3 mounting hardware as M3, when it's M2.5 and the Pico as M2.5 when it's M2. Added schematics for…
https://apolloautomation.com/ The ball mount is a remix of: https://www.thingiverse.com/thing:67911 from Gyrobot
“Gotcha” Apollo Justice's cherished and consistently worn bracelet. It tightens on his wrist when when a witness displays nervous habits, however this one is just a prop for cosplay. Fits a wrist 3" (or 76mm) in diameter. The two sides…
This is a remix of https://www.thingiverse.com/thing:3592040 changing the drone LEM into a watch display for your Omega Speedmaster MoonWatch. I increased the scale and added a LEM cup to hold the watch in place. Omega has created a LEM…
Chicken nuggets dough cutter Cortador de masa patitas de pollo
in my mini world my bike is the astronaut's spaceship
The Apollo Automation M-1 LED Matrix is a vibrant, high-performance display featuring 4096 pixels in a HUB75 format. Powered entirely by our new 5V (USB-C or WAGO) controller, it requires no additional power sources, keeping your setup…
Bring classical elegance and divine light into your space with this refined bas-relief sculpture of Apollo, Greek god of the sun, music, and prophecy. This model features Apollo emerging from a cracked stone frame, holding a reinforced…
A must print for a Rottweiler owner!
