838 models
Complete list of parts and 3d models used to create your own Hydroponic Tower: https://kit.co/AllYourTech/3d-printed-hydroponic-tower-suggested-parts Today i'm putting together a 3d printed modular hydroponic tower garden. It's an…
Print approx. €4.87–€5.96 excl. taxPreliminary estimate for PETGSource material: PET
A hydroponic growing lid designed for plant propagation, rooting cuttings, and simple water-based growing. The lid holds multiple small growing baskets above a glass, jar, or container, allowing plant stems and roots to stay supported…
Print approx. €1.78–€2.18 excl. taxPreliminary estimate for one variant
Features Modular structure, easily scalable, put modules together, twist & lock, done Filling module with cap 3-way planting modules (hollow version recommended) Internal/external water dispenser modules Lid Custom net pot for Jiffy-7 41…
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for PETGSource material: PET
History After one year of designing, testing and making a complete prototype, and then six months of running the system, I finally got to the point where I wanted to share my overkill project. This project was made because I always wanted…
Print approx. €10.16–€12.42 excl. taxPreliminary estimate for PETGSource material: PET
Ever want to get into hydroponics (growing plants in water), but only had a bunch of mason jars? Well, if so, here's a solution for you. Get your own hydroponics garden in under half an hour! Assembly/Usage: Replace inner portion of mason…
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for one variant
A simple rack that holds hydroponic tower grow cups upright while establishing roots in a seed starting. Blacks out the water area underneath of the tray to discourage algae growth. Once the seedlings are established and there are roots…
Print approx. €2.65–€3.24 excl. taxPreliminary estimate for PETGSource material: PET
The pots are designed to be a simple as possible utilizing ‘deep water culture’ hydroponics. The seed is germinated in a 20mm diameter rockwool plug which is placed in a perforated basket in the lid of the pot. The pot is then filled with…
Print approx. €2.70–€3.29 excl. taxPreliminary estimate for one variant
These parts are designed to use a few solid layers on the bottom and then a continuous and unbroken profile all the way up the part. Prusa and Slic3r call this vase mode, while Cura calls it spiralize. I watch Hoocho on Youtube and they…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant
The original print was for wide mouth jars, this remix is for regular mouth (2 ³⁄8″ for the inner diameter and 2¾” for the outer diameter), print diameter is 67mm. Pod holds seed starting medium (coconut fiber, perlite or vermiculite).…
Print approx. €2.08–€2.54 excl. taxPreliminary estimate for one variant
The original print was for wide mouth jars, this remix is for regular mouth (2 ³⁄8″ for the inner diameter and 2¾” for the outer diameter), print diameter is 67mm. The original was a 2 piece print, this re-mix is one piece. The original…
Print approx. €1.21–€1.48 excl. taxPreliminary estimate for one variant
I created this seedling tray because i could not find locally more seedling trays. I made it like this after some documentation found on the internet. Print instructions Printer Brand: Prusa Printer: MK3S+ Rafts: No Supports: No…
Print approx. €5.76–€7.04 excl. taxPreliminary estimate for one variant
I noticed user Bethaney Call had mentioned in the comments that at some point in the past there was a planting module without diffuser sieve. As I figure plants with longer roots may get entangled in the sieve, I wanted to have a separate…
Print approx. €4.14–€5.06 excl. taxPreliminary estimate for PETGSource material: PET
Rohrhalterung mit wiederverwertbaren Kabelbindern für Hydroponik-Anlage mit 6,3 cm Rohrdurchmesser. Damit können höhere Pflanzen vor dem Umfallen bewahrt werden. Um in meiner Hydroponik-Anlage auch höhere Paprikapflanzen aufziehen zu…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for PETGSource material: PET
Mount a 3x4" downspout to a hand railing Details fits hand railing width 40mm vertical railing supports must be ~8-12mm in diameter includes zip ties routing around vertical railing, though not required Print Settings Fits on a Prusa Mini…
Print approx. €8.35–€10.21 excl. taxPreliminary estimate for PETGSource material: PET
My original Kratky model used canning lids that are made of metal. After a few uses they tend to rust. Luckily I found a regular mouth jar lid here on printables and modified it to add the rockwool cube holder.
Print approx. €2.18–€2.66 excl. taxPreliminary estimate for one variant
Would you like to make extra income selling these planters (and future new models)? Please feel free to check the models with the included commercial license here:…
The original Modular Hydroponic Tower Garden 3D model created by boundarycondition is no longer accessible due to the user's account being deleted. To ensure the continued availability of this valuable resource, I am reuploading the model…
The original Modular Hydroponic Tower Garden 3D model created by boundarycondition is no longer accessible due to the user's account being deleted. To ensure the continued availability of this valuable resource, I am reuploading the model…
Summary This is my version of the modular hydroponics tower. It was inspired by the modular tower here . It has several key upgrades. More Stable: This tower has a wider base attaching it to the nutrient reservoir making it much more…
Model created by Toshiyuki Ishibashi
Simple mod to improve the 5-fold version of the the amazing Modular Hydroponic Tower Garden Parts are fully compatible, just some minor changes: Standard Pot enlarged the net cups, so they match the height of the standard size versions…
Intro This is a modified version of boundarycondition's Modular Hydroponic Tower Garden and some features of ghoofman's Smart IoT Modular Hydroponic Tower Garden . I finally decided to upload my remix of boundarycondition's Modular…
since the original cap was way to high for me needs, i made it low profile, but this did not distribute the water well enough, and it tended to splash on one side - so i added this “knob” in the middle, that solved this issue prints with…
Hydroponic Planting System is a remix is not only my designee, and I think maybe some of you will like and need one I have adapted to my designee the pot support and the lock mechanism. The module has 3x planting spot's with a 3mm wall…
A modular hydroponic tower with hexagonal base. This is a smaller hydroponic tower (dimensions: 36cm x 40cm x 64.5cm). All parts should fit even on the smaller bed sizes. The model consists of segments that can be connected to build a…
hello friends, I'm Vlad-3d designer from Ukraine , I got this idea and I really want to implement it, first of all, this product is aimed at premium materials and I want to implement it as a final product, but I will also share the final…
This system can be stacked infinitely tall. Let's say that you want your system to be 3 layers tall. Then you will need 1 Holder, 3 Sections, 3 Tubes, and 18 Planters. To assemble, just insert the each tube into the hole in the bottom of…
My Smart Hydroponic Tower – Grow Fresh Greens Anywhere! Hey everyone! I’m excited to share my hydroponic tower design—a compact, space-saving system that lets you grow tons of plants, no garden required! After lots of tweaking, I’ve…
50mm net cup for hydroponic plants. Print Settings Printer Brand: FlashForge Printer: Creator Pro Rafts: No Supports: No Resolution: 0.2 Category: Outdoor & Garden
Hydroponic garden system (like IKEA vaxer). 3 of these 6-cell modules fit in the basic Ikea Greenhouse (model: SOCKER) Print the vase in "vase mode" with one layer. If you printer cannot do that, try the "thicker-vase.stl" file. I used a…
This modular hydroponics tower lets you grow a large amount of plants without the need of lots of room. Each module fits 3 50mm (2 inch) pots and has the water tube running up the middle. Just stack as many modules as you require. Each…
Announcement: 2025 remaster in the works — let me know in the comments if there is anything you would like to see in the new design. Feb 2021 Update: Added a garden hose threads version of the cap. Stole archipelagourbanfarms 's Modular…
After one season of successfully using my printed hydroponic tower, I disassembled it to clean and overwinter the parts. By that I realized, that the construction around the filtration mesh holder won't be usable another season as it has…
Green Onion Mason Jar Station! tired of buying and buying? time to start growing instead! simply chop the bases off the onions and stick them inside a jar of water (with nutrients). they dont need much light and are very hardy. made for…
Modular Concrete Hydroponic Tower - Spiral Mold System (BETA) ❤ Support the Creator / A Special Request If you love this design and want to see more ambitious and complex projects like this come to life, please consider purchasing the…
I made this Airstone. It works by altering small arcs, thus creating little holes. I used some 2 cent coins to weigh it down enough so it will sink to the bottom. However, you may get away with printing it at 100 % infill, as both PLA and…
i printed this in PETG O.2 layer 20 % infill print upside-down with tree support touching buildplate only
At first many thanks to Conr8r for the Upgraded Modular Hydroponics Tower . I made some addons so you can build your own tower with even more flexability. These parts are compatible with his design. I designed additional shelfs with one…
This is a simple water level indicator for the hydroponic tower. I adapted a lid for this and fitted it with a hole and a guide for the swim body. The swim body have to be printed with three outer walls and hollow.
Hydroknecht Hydroknecht is a smart modular 3D-printed Hydroponic system. Based on a rain-tower design it can be built to fit multiple modules with multiple planters. One planter can fit plants with a base diameter of 6 cm. The tower is…
Hydroponic Plant Basket for 75G Marineland Aquarium. Fits perfectly in the space between the glass lid and the back glass panel. One section perfectly fits 1x regular, 2x long, and 1x extra long plant basket. The basket reaches the bottom…
3D Hydroponic Tower with 4 Openings Overview The 3D hydroponic tower is a versatile and space-efficient solution for growing plants in a controlled environment. Designed with four openings, it allows for easy access to the plants while…
The pod caps cover unused slots on the Gardyn column to help prevent foreign object intrusion like dust and debris. The pod gets removed before placing cover to avoid water sitting the cup of the pod.
UPDATE 23.08.2024 The NEW VERSION is more stable and the small lid fits much better!!! ----------------------------------------------------------------------------------------------------------- Printed on Prusa MK4 with input shaping,…
Hydroponic Tower (compact design) Grow your plants without soil. With locking mechanism. I print all my parts with 20 % infill. I will add more parts soon.
Let's say that we want to have a 3-layered hydroponic tower. Then we will need: 3x TowerMiddle ( it's in the printable files ) 3x WaterGive 15x Pot ( there are 3 layers, 5 pots per section ==> 3*5=15 ) 1x Top PRINT IN VASE MODE (in all…
Modular Hydroponic Tower made for 2inch Net Pod this is the best model as of now and its a world of difference with the other one. the fact that you dont need to spend hundreds of hours more to print the net pods, simply use cheap…
This is a new base type for the Modular Hydroponic Tower. I designed this to mount to a ¾" plywood board. I increased the width of the top for better stability and to make room for 4 screw's. The design is meant to be used with #8 x ¾"…
I designed two net pots and a holder for the 5cm pot. The net pots are 5cm and 7cm wide at the bottom. The holder fits on DN110 pipe. Each part is in profile on an extra build plate. I printed and tested the profile on a P1S. I would be…
Intro This is my remix of boundarycondition's Modular Hydroponic Tower Garden and some features of ghoofman's Smart IoT Modular Hydroponic Tower Garden . I initially posted this project in Thingiverse (…
I don't think there is a need for such a complex Pot in the Modular Hydroponic Tower. In fact I prefer a more minimalist design. I simply cut of the last part of the Pot. As a result now 9 pots can be printed in one build plate, and I…
I took the stream breaker and added a cylinder to the top so it can be held down by the lid. I also added some fillets around the legs for strength. I'm not actually sure how people have been attaching the original stream breaker, but…
Tis model doesn't utilize the external mounting points (used for plant supports and circular lighting upgrade), instead clamps on around the tower itself. Thus you can easily adjust its position. It can also be installed alongside with…
This is a model I came up with which is simpler than most of the other options our there. The segments are infinitely stackable. The base has 3x .25" mounting points. The lid has a ½" spigot for a flexible tube to be hooked up to along…
Description Experimental vertical hydroponics system I have designed for growing Herbs indoors. Things you will need for the assembly: M5x40 button head cap screws (x18) M5 nuts (x18) M8 threaded bar (730mm minimum) M8 nuts (x8) M8…
Since none of the original adapters fitted my needs, i designed my own. It has an adapter ring with 147,5 mm diameter Printing Just flat on the build plate, no supports needed Assembly 5 x M6 nut 5 x M6x16 Bolt (longer, if you have a…
This indoor garden includes water reservoir - Option 1: Base => 330mm (3.6L) - Option 2: Base => 250mm pots & trays level gauge filling hole LED grow stand (adjustable) funnel pot for growing sponges/pods You will need potting soil or…
This is a collection of pieces I printed for the bottom module section of the hydroponic tower, plus a mounting adapter (2 parts), a filling/inspection cap and a cap for passing through the electrical cord for the pump. All the parts have…
Modular hydroponic garden system with netcups. Grow your own food in a small place. I used PLA but you can use whatever you want. I bought a small water pump like in the photo and added a tube into it. Happy printing from Portugal :)
This net pot fits the female end of a 4" PVC fitting and print without support.
The model comes in 3 parts, all can be printed without supports - the symbol needs to be glued in and is about 0,1 mm recessed so no multi material or multi color printer needed
Key Features: Space-saving Design: This hydroponic planter is designed with compactness in mind. It can be easily placed indoors or outdoors, making it suitable for any living environment. Efficient Water Usage: With its hydroponic…
Install LED-lamps easily to your hydroponic tower. Two variants attached: 1. 250mm length 2. 350mm length (can be printed with print table of 300x300mm size) Update 16.03.2024: 350mm version added. No supports required, print on flat…
Hallo, hier stelle ich euch mein Hydroponic-Sytem für die Küche vor! Frische Kräuter immer in Reichweite, so stelle ich mir das vor…. :) Ich wollte etwas designen, was sich optisch von den runden Towern abhebt. Das ist mir ganz gute…
I remixed the modular tower from https://www.thingiverse.com/thing:3405964 and combined it with the improved locking ring from https://www.thingiverse.com/thing:4965368/files. For the lid to the 5 gallon Lowes bucket, I used…
A 3D model of an hydroponic tower that uses 3 inch cups, didn't test it too much. Printed just one tower and gave it to a friend, if you have some feedback i will be happy to hear. I used petg with 0.6 nozzle. Link to the 3 inch cups :…
I remixed the original because the holes in the filter-spacer were missing and the box for the water and pump was too small and without a manitance opening for pooring water and measuring the PH- and EC-levels. Printed with PETG for water…
Please reference original creators and myself if sharing/remixing. Credit to Alex Rodriguez for the original design of this system : Modular Hydroponic System Credit to Marc Giovannoni for the : Hydroponic 13mm Diffuser Credit to Andy…
Since the original had a few sharp corners and edges that were a bit tricky to clean and got some dirt and alge stuck in, i've changed the geometry slightly Printing Just flat on the build plate, no supports needed
Bring elegance and greenery together with this Infinity Propagation Vase . Inspired by the infinity symbol, this modern planter combines clean geometric lines with functional plant propagation. The design securely holds two 25mm diameter…
Introducing our cutting-edge planter net cup, meticulously designed to revolutionize your hydroponic gardening experience within your 3D printed hydroponic tower. Born from a fusion of innovation and functionality, this cup is engineered…
The model comes in multiple parts, all can be printed without supports - the symbol needs to be glued in and is about 0,1 mm recessed so no multi material or multi color printer needed
New Version - 13.04.2025 Ive updated the terrace to a new version. Whats new: save filament higher strength easier assambly The new segments can be easy click togehter. The only screws you need are the M5 countersunk head to attach the…
Accessories for the TowerGarden – towergarden(dot)com Instead of the two upper floors of herbs, you now have 8 more normal places at half height. Requires 12xM4 12mm screws and matching nuts Only chemically inert and food-safe materials…
This is a remix of a remix. I really liked the 5-gallon bucket adapter by daemionfox ( https://www.thingiverse.com/thing:4580194 ) for this modular hydroponics tower ( https://www.thingiverse.com/thing:3405964/remixes ), however, when I…
This is a one sided 3-way planting module for more plants at the sunny side. It is a Remix of the 5-way planting module from: https://www.thingiverse.com/thing:3405964 Unfortunately the build has not migrated to Printables yet. As my…
Remixed the bucket lid for printing in 8 separate pieces. The pieces are joined using 24 M4 bolts and nuts.
This modified "Planter Netcup" has a small catch to prevent the net cups from tipping over when the plants grow too big. It is designed to dimensionally fit the net cups as shown in the picture. When screwing in the "Planter Netcup" into…
Huge thanks to Moby1 for creating the model, I just added an angle on Top to print it without support and safe material.
Here is my first version of a modular hydroponic tower. It's my first trial so I will improve it in the future. You just need one of those cheap 3.3V pumps and a pipe to make it work! good luck!
Updated 19.10.2024. This version has the holes for the screws and is ready for the 12 M3 screws and nuts. ----------------------------------------------------------------------------------------------------- Printed on ELEGOO Neptune 3…
Head over to https://www.instructables.com/3D-Printed-Hydroponic-Aeroponic-Garden-Tower-for-U/ for instructions
Line width 0.44 mm. Layer height 0.2 mm. Versions: Name Hole diameter AG 28 Files: netpot-AG.stl the net pot itself netpot-AG-plate-hex.stl bottom plate with 5 mm hexagonal holes netpot-AG-plate-solid.stl bottom plate without holes…
Hey, we designed this hydroponic tower after we tried some other models here. Unfortunately, we were not happy with other models for our usecase. We want to grow up fruits ad vegetables. We needed more stability and bigger pots, so I…
I needed a 4x3" downspout endcap for a hydroponic project. I modeled this for a vinyl downspout I picked up from Lowes. There is ~1mm clearance for silicone caulking to make it water tight. Need a water level indicator for your new…
Tray system for IKEA SAMLA boxes (5l or 11l) as nursery of seeds or cuttings / cloning for hydroponic propagation. The nursery makes already use of the final pots meant for example for the hydroponic tower. It holds up to 6 of the…
This rack holds up to 6 net cups, net pots, basket cups or whatever you want to call it. It is designed to be a simple solution to keep the rock wool of hydroponic plants wet during the germination phase. After that you should put the…
This year I'm experimenting with hydroponic growing, Kratky method specifically. I made this jar lid with inbuilt net pot. It screws onto common glass jars. Jar neck diameter should be 8 cm with 6 lug threads. A very common size in…
This is a hydroponic basket that fits this model. https://www.amazon.com/gp/product/B08TTSD78F/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
This Remix Requires the use of Bucket_Lid_Mount-2.stl from https://www.printables.com/model/232109-upgraded-modular-hydroponics-tower-addons This has been specifically been designed around a blue Lowes 5-Gallon Bucket, others may work but…
Hydro net cup for tomatoes or other large plants. Large beveled lip aids printing or can be flipped over if you trust your bridge settings.
This a plant support for the 4-way module originally designed by boundaryconditions https://www.thingiverse.com/thing:3405964 And it also fits with its spiritual successor by Luitzor https://www.thingiverse.com/thing:5712775 Prints Flat…
Rota ting Hydro ponics Tow er. Pr int pa rts wi th in ner wa lls wi th 12 0% fl ow I us ed a . 8 noz zle and t wo wa lls I n or der to ma ke the to wer rot ate y ou wi ll ne ed a swi vel ada pter on yo ur wa ter ho se. G o to yo ur lo cal…
It prints fine with pla with standard settings, you can print either with or no support All cred should go to Bdroos on thiniverse for the model. I just refined it 😁
Are you struggling to properly water your plants? Look no further, because I got your solution here! This is a self watering semi hydroponic system that comes in various sizes ! Water from the reservoir is transported to the roots by a…
I had a hard time printing the filtered base in PETG, as it didnt like the tiny holes. I opted to redesign that part to have slots instead. it now resembles more of a floor drain design and should be easier to print in PETG.
Note, most of the parts are compatible with the original tower system, so you can use those too. Some parts of the original system with a low bottom might not fit with the new parts that have an internal pipe, if the top part has low…
Hydroponics pot. Lower part is for water and nutrienst. You can use small waterpump to pump water and nutrienst to the plant. I have used BOYU FP-100 water pump. Plant is planted to rockwool and clay granulas. There is float for…
This is a lid designed for Juice Plus Tower Garden. It was designed for the Flex system. Use it to cover the holes that are not in use to prevent rain/bugs/whatever from entering. The pieces actually snap into place and do not move in the…
