216 models
Dual Fuel Processor - Remix! Armies rule on fuel. Within the great megalopolises, billions of vehicles crowd the thoroughfares as cargo is delivered, and humans, aliens, and worse are transported through the heavily polluted environment.…
Print approx. €8.33–€10.18 excl. taxPreliminary estimate for one variant
Atmosphere Processor! Within the great megalopolises, the air is heavily polluted by thousands of years of industrial waste. A virtual hellscape requiring rebreathers in much of the lower level. The overlords in the upper levels would not…
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for one variant
Inspired by Michael Brill 's Kenwood Chef Blade Holder , I wanted to attempt to build my own version and take the opportunity to experiment/learn more of OpenSCAD. The first blade counting from the left is facing a different way from the…
Print approx. €5.60–€6.85 excl. taxPreliminary estimate for PETGSource material: PET
Fuel Processor! Armies rule on fuel. Within the great megalopolises, billions of vehicles crowd the thoroughfares as cargo is delivered, and humans, aliens, and worse are transported through the heavily polluted environment. Thousands of…
Print approx. €7.43–€9.09 excl. taxPreliminary estimate for one variant
Quad Fuel Processor - Remix! Armies rule on fuel. Within the great megalopolises, billions of vehicles crowd the thoroughfares as cargo is delivered, and humans, aliens, and worse are transported through the heavily polluted environment.…
Print approx. €20.17–€24.65 excl. taxPreliminary estimate for one variant
This is a container to store Cuisinart food processor blades. It accommodates an arbitrary number of 150mm disc blades, two DLC-10 FP-100TX steel blades, and two disc blade mounts. The Solidworks file is built with equations. Open the…
Print approx. €20.83–€25.46 excl. taxPreliminary estimate for one variant
An organizer for 6 Kenwood food processor cutting disks. Print instructions Check-out the width of the slots for the disks you need to store and adapt them in the fusion 360 model. Print top surface on the bed. No support needed.
Print approx. €8.16–€9.98 excl. taxPreliminary estimate for one variant
This is a custom holder for these Cuisinart 12 cup accessories: FP-12RSD reversible shredding disk (180 mm diameter, 10 mm depth) FP-12ASD adjustable slicing disk (180 mm diameter, 22 mm depth) FP-12STM stem adaptor (2) (18 mm diameter,…
Print approx. €24.57–€30.03 excl. taxPreliminary estimate for one variant
This is a cutter support for a Siemens MK 4.0072 food processor. It is a 30+ year old food processor and I had lost the part. I designed a replacement part in OpenSCAD and printed it in PLA. Print instructions Needs no supports. 3…
Print approx. €1.12–€1.37 excl. taxPreliminary estimate for one variant
This is a pusher for the Philips food processor for the HR 3140-3142-3145 models. STLs available must be printed in the original orientation, like a vase. No supports needed. No glue needed, just fits perfect. I hope you can fix your…
Print approx. €1.37–€1.68 excl. taxPreliminary estimate for one variant
I needed an under desk mount for my PS4 VR processor unit. I needed it to hang lower than the surface it was mounted on, so it would clear the lip on the front of the desk. This is for the second version of the PS4 VR processing unit. The…
Print approx. €1.10–€1.34 excl. taxPreliminary estimate for PETGSource material: PET
Studenti si vytvoří 3 smajlíky jako hodnotící nástroj, poté je vymodelují v programu Tinkercad a nakonec provedou samotný tisk na dostupné 3D tiskárně Prusa i3 MK3S.
Print approx. €0.52–€0.64 excl. taxPreliminary estimate for one variant
With my Ender 5 i had the problem, that retracting a lot on one spot of the filament, led to grinding down the filament or rolling it flat, which results in a failed print, because the extruder can't extrude filament anymore. If you have…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
The native clutch broke due to the fact that there was an attempt to make smoothies from a metal spoon) I printed it from PETG with 100% infill, a 0.4 mm nozzle, and a layer thickness of 0.2 mm. It’s been working (with infrequent use, of…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for PETGSource material: PET
Idea and dimensions taken from the John Deere CCMS Website
Print approx. €6.97–€8.52 excl. taxPreliminary estimate for PETGSource material: PET
This is a printable model od processor in TQFP52 case Printing times with structure - 79g : 3h26m = MK4 4h44m = MINI/+ 6h41m = MK3S/+ Printing times without structure 67g : 2h37m = MK4 2h59m = MINI/+ 4h53m = MK3S/+ Version 1: Processor…
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant
🐉 Dragon Scale Flexible Mesh Created by KNINcustom · Explained step-by-step on my YouTube channel 🎥 👉 https://www.youtube.com/@KNIN_Custom 🔍 Description This is a Dragon Scale–style flexible mesh , entirely modeled from zero in Fusion 360…
🧩 NASA-Style Hexagonal Flexible Mesh Created by KNINcustom · Explained step-by-step on my YouTube channel 🎥 👉 https://www.youtube.com/@KNIN_Custom 🔍 Description This is a NASA-style hexagonal flexible mesh , designed from scratch in…
Simple Process Diagramm Template (ISO 5807) in a 5 mm Grid (20x40)
I think the settings in Bambu Studio are on the very safe side when it comes to how much filament is flushed during a change. I wanted a way to test what would be optimum. I thought about how best to approach this and came up with a plan.…
Created a process and Silk PLA profile for the Elegoo Centauri Carbon. The settings are based on something i found for my Anycubic Kobra S1 and works great on the Centauri Carbon. I added a saved project file with the low poly version of…
A beautiful minimalist painting of a Processor on the wall. Size 198 x 200 mm Print Settings Printer Brand: Creality Printer: Ender-3 S1 Pro Rafts: No Supports: No Resolution: 0,2 mm Infill: 15 % Filament: PLA Notes: Top/botton pattern -…
I always wanted to share the original film processor that I created years ago... Its design was clunky and difficult to build, I finally found the time to simplify it making it easy to print and easy to build. Here are the files :) I also…
Remixed an older design from Discobanan since the original had a lot of friction for me. Safely store your precious Xeons (and Desktop CPUs)! Best printed as the STLs are already orientated.
Trichter mit größerem Innendurchmesser des Füllrohrs (Trichter V2.2.3mf) Grundplatte & Auslauf → issues fixed Added new version of lever. Will also add enclosure for Arduino for motor control and timer. Modelcraft RB350100-0A101R…
Direct die cooling is done at your own risk! Noctua cannot be held responsible for any damage that may occur to CPUs or other hardware components when removing the heat spreader and using direct die cooling. Customers can easily 3D-print…
Direct die cooling is done at your own risk! Noctua cannot be held responsible for any damage that may occur to CPUs or other hardware components when removing the heat spreader and using direct die cooling. Customers can easily 3D-print…
Just print it in the normal orientation, no Supports required. I would use at least 3 wall layers for stability. On the bottom are some indents where i glued foam pieces to keep the part from slipping.
3D scan of Shoulder Blade Scan - Scapula (Right) Missing Coracoid process! (part of the bone is missing) Thanks to the Institute of Anatomy First Faculty of Medicine Charles University for the possibility to scan this model. A collection…
Zum Skript selbst gibt es eigentlich nicht viel zu sagen, außer... es muss nichts mehr im Prusa Start GCode oder End GCode ergänzt werdenzum aufrufen des Skriptes braucht es beide Pfade (Python und Skript) z.B.…
Imagine a world where computation began with gears and steam-powered machinery. Enter Charles Babbage, a visionary mathematician and inventor who conceptualized the world's first mechanical computer, the Difference Engine No. 2, back in…
An der Rührschüssel der Braun Küchenmaschine K3000 gibt es einen oberen und unteren Mitnehmer. Wenn diese reißen, funktioniert der Antrieb nicht mehr. Ersatzteile sind leider nicht mehr erhältlich. Hier ist der obere Mitnehmer, den…
I have rebuilt the part of Andras Bognar so that you can print-in-place and no post-processing or support structures are necessary. Best print in 0.2 resolution Happy Printing!
This is a custom design I made for my PSVR Processor Unit. I needed to keep it out of the way while at the same time stop it from flying about while connected to the headset. I have modelled in some pilot holes but if you need to make…
The knob should fit just about perfect on the shaft if the measurements match. You can find shaft hole specs in the pictures. The diameter is 47.3mm. I found the settings in the project file to have the optimal settings for PLA including…
A remix of calebfwood's 4-blade storage case to safely hold these razor sharp and oddly-shaped cutting tools. Our food processor has only two blades, but we wanted to store the "stem" that holds them alongside the blades themselves, so I…
PRINT THE LEG 16 TIMES! Glue all parts together. Scale down to 55% for true scale. (Not recommended)
Holder designed for Kenwood Food Processor grating discs (Kenwood Chef, Kenwood Major)
This is a replacement for the Pusher for a 5KSM2FPA Food processor which broke. It's not a copy but an in my view improved design. => it's much more robust than the original which just broke as accidentally was dropped => it's closed on…
Holds the blades for the food processor of the Ninja Deluxe Kitchen System.
The detachable ribs are expected to be removed after printing. * Printed in PLA * No brim * No generated support
The robotic arm is a 5-axis robotic arm with 5 degrees of freedom (DOF) . It uses SG90 and MG996R servo motors to move its parts. The SG90 is used for smaller and lighter movements, while the MG996R is used for stronger movements. Each…
I needed some funnels for film processing. I couldn't find any vase mode funnels I liked (and that would print easily), so I designed my own. While I was at it, I added text to make sure I'd never confuse them and contaminate my…
Pour certaines étapes de préparation, on doit garder le couvercle fermé (ajout d'un ingrédient, pesée, etc.), et le trou d'origine est peu pratique. La réalisation de cet entonnoir corrige ce problème. Très utile avec mon Compact Cook…
The BOSCH MC812S814 MultiTalent 8 has a mouthful of a name. It also has some cool stuff. The food processor has a grater addon, that I managed to break while grating cheese the wrong way. So I made a replacement. I used PETG, because this…
Replacement part for the Bosch MUM kitchen machine / food processor. This clutch part conntects the hex rod form the motor with the rotating tool / blade.
Holder for Cuisinart DFP-14BCWNY 14-Cup Food Processor slicing disc and shredding disk as well as the plastic stem adapter thingy. Print instructions Category: Kitchen & Dining Summary Holder for Cuisinart DFP-14BCWNY 14-Cup Food…
Description: This project is called the Rondeo and is used to solve an issue with the Med-El Rondo 3 cochlear implant processor shifting off the charging position during the night. Failed charges are a big problem since it means that a…
A little riser tray to hold the PSVR processor box. That little box gets really hot and I had mine on top of the PS4. I thought it would be a good idea to give them both a little breathing room. Print instructions The legs for the riser…
(2021) Thingiverse seems to have destroyed / lost multiple additional stages of instructions and reference photos. I'm not sure it is worth recreating given the advances in automatic mesh bed leveling. Work-in-progress... would be…
Use at your own risk. I accept no liability if this is printed and used to bypass safety mechanisms of a Cuisinart DFP-14BCNY 14-Cup Food Processor. Seriously, this is dangerous. Only included here to illustrate the geometry of the safety…
PSVR ProcessorUnit Stand. See this site for more information. Sorry, This site is Japanese only. ( https://kitto-yakudatsu.com/archives/2961 ) Print instructions Category: Video Games Print Settings Printer: DeAGOSTINI idbox! Rafts: No…
Wall mounted holder for the slicing disk and the drive arbor of a Ninja BN601 Food Processor. It should hold things pretty well, but I make no safety claims/guarantees.
Not actually a functionally necessary part. You can totally live without one, but it was a nice little 3D design training project. Printed mine in PLA, 0.6mm nozzle 0.2mm layers. Fits snug and secure. Wife loves it, which is important for…
I created this blade display for my Kenwood CookingChef food processor blades. The labeling is according to the numbers on the blades (the edges of the different blades don't have the same height).
V9 Entrance is now easier to push in __________________________________________________________________________ Now with Directional Arrow This Model is curved all the way around allowing for easier compression into the spool Step 1 Rip…
This is a chute to redirect the discharge of brass from the Rollsizer brass processor in a downward direction into a pail or other collector. Prototype 3 has thicker walls and is adapted for 3" round discharge hose to prevent spillage.
Javasolt a minél erősebb anyagból történő nyomtatás a kissebb kopás érdekében .
As of July 5, 2024 the official GCODE for printing the MMU3 printable parts is done with the Print settings configured for ‘SPEED’ rather than ‘QUALITY’ and makers (myself included) have reported problems using the provided file. This…
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … I needed a solution to store the tools I need for the…
Got a Valeton GP 100 and wanted to place it on top of my old Marshall amp, but there was the carriyng handle in the way. So I created this simple stand for the guitar pedal. Printing instructions Print “Stab.stl” 2x with 40% infill Print…
I designed this opener based on the other Model i also designed in order to open the drive axle of the Food processer.
I wanted to mount the Processing Unit (PU) on the wall near the ceiling, so I could run the headset cables across the ceiling and down. I started by mounting the PU to the wall with 3M Command Strips, but I knew I would want to take the…
This is a 3D printable replacement Stopfer (pusher/plunger) designed specifically for the Bosch MUM 4405 food processor. If your original pusher is lost or damaged, this model provides a functional and snug-fitting alternative to keep…
A sign which explains exactly , what a Process Manager does. ;-) Adjust the size in x and y direction in your slicer if desired. It is printed in multi-color with manual filament change at layer height. If you like my stuff, then please…
Gcode-post-processing-script-for-dynamic-side-fan-speed A gcode post-processing script that allows for dynamic speed control of the side fan. Additionaly it can calculate material cost based on extrusion role (e.g. you want to charge more…
Recommended material: PC or PA.
This food processor doesn't come with any sort of holder or caddy for its slicing/shredding attachments. So I designed a 3D printable option. Each holder requires the following metal parts: 3pcs M4x12mm socket cap head screws 3pcs M4x7mm…
Left hand and right hand configuration of my AirPod holder for the Med-El CI processor. I'm SSD, so use one of these to hold my Airpod up to the microphone input on my Rondo 3, and have the other AirPod in my “good” ear. Means I can…
MIFO - Semi-automatic Film Processor (Why MIFO? Why JOBO? - Find the answer to Both) Well Here it is, a semi-automatic temperature controlled water bath film processor. I have included gears for Nikor (Stainless Steel) and Patterson…
This is a layout of a basic tool used to process silicon wafers into computer chips or other devices. A tool such as this would perform a single step in a recipe consisting of potentially thousands of steps to fully process a batch of…
Very basic stand to hold up Intel LGA775 CPUs like Celerons and Pentiums from the mid 2000s. Holds the CPU at a 10 degree angle, and uses less than 1g of filament, while not blocking view of the front or rear.
My Bosch OptiMUM Series 9 food processor came without any stand or holder for its tools whasoever. So I designed this fairly simple stand for the interchangeable stirring tools. The design is based on those for the current 2025 Series 9…
My push cap broke for the Kenwood food processor AT340 (Chef Titanium). So I made a simple new one. The original measuring cup insert fits perfectly. OpenSCAD file to follow. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts:…
Audit Game Process Engineering
This is a script to modify the G-Code to wipe the nozzle with the nozzle brush modifications for Ender 3 (or other similar printers). It allows you to set the wiping mechanism to be at specific intervals of layers. I didn't want to wipe…
Replacement for the safety tab on the Ninja Food Processor. Ours broke off and I didn't want to glue a 3d print onto the lid, so this version fits around the protrusion on the lid where the tab was connected and can be removed from the…
The bevel gears hidden inside the rings causes them to rotate axially when agitated trans-axially. very amusing to idly spin. The center most ring acts as a bushing, and lets you spin the whole device on one's finger. Surely such…
A simple template to draw BPMN graphs or simple flow charts. Printed using recycled PLA in white and brown, 100% infill on a Prusa Core One with the satin print bed.
A simple model to keep my drawer more organized. Fusion file provided so you can change diameters etc if needed!
Designed this holder to stow the shredder and discs for my Bosch Series6 food processor (MUMS6….). It can hold at minimum 3 discs and will be part of the foot to support the shredder itself. Upper part will be locked in the shredder…
As time goes, all plastic in monitors become brittle. Broken deflection board bracket is a common issue (and has replacement models created already). But if you wanted to do a full recap then this backup may save your project if you break…
This is a processor cover box for a PGA 478 / socket 478 processor from intel. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2mm Infill: 5 Filament: Sunlu PETG…
3-Piece CPU. Has a die, IHS, and board
This is a fairly large model so I printed it with a 0.8 mm nozzle and 0.5 mm layer hight. It still took about 5 hrs to print.
I printed it with PLA. If I had to do it again, I would print it in PETG for a little more flex, but PLA works just fine. The design can warp, so you need to be careful with ambient temperatures and moving air while you print. I…
Display nine processors on your wall. Drill holes in vertical joints to mount on wall. Processors are pretty lightweight so only two should be needed.
Case for Raspberry Pi 3A+ with BBC Micro Coprocessor Tube Hat giving full access to all the 3A+ ports and the top 40pin connector of the IO hat. Also has a BBC Micro logo on top and a larger logo on the bottom doubling as an air vent.…
Replacement drive clutch and shaft for Oster 10-Cup Food Processor model # 2142966. This will require a 6mm metal shaft to be glued into the hexagonal printed “shaft”. The other end of the metal shaft, through the food processor bowl, is…
Replacement coupling for OBH Nordica - Food Processor First Kitchen AF47JZ. The original coupling's nut became detached, rendering the blender attachment nonfunctional. After designing and 3D printing a replacement, as well as removing…
Replacement for food processor pusher. Print in PETG or other food safe filament.
This is a variant of the food processor blade holder published by futur3gentleman. The blades used with the 14 cup model of the Cuisinart food processor were larger than would fit in the original design, so I recreated it to accommodate…
This part is located in the handle of the large container of the Ninja blender.
I have a very old Braun 4243 Kitchen grinder and blender. The plastic of the white part (I have no idea what it might be called) deteriorates. So I decided to print a new one. I use this machine quite often. Till yet no one made a better…
I've printet it with transperent PETG (foodsafe). Any plastic should work. Glue it in place with superglue.
Accessory holder for Kenwood FDM30 food processor. Got sick of these bits and pieces sitting loose in the cabinet. One thing to note, I didn't realise the cutting discs are not symmetrical on the back and front, so they only fit nicely in…
This is a cover for a AMD Socket AM2/AM2+ processor. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Doesn't Matter Supports: Doesn't Matter Infill: Doesn't matter Category: Tool Holders & Boxes
This is a replacement safety lever for the bowl lid of a 14 Cup Cuisinart model DFP-14BCNY. The one on our 3 year old food processor was cracked and about to fall to pieces, so I designed a new one. For a $320 appliance, this part is…
![Charles Babbage's Difference Engine: TrialPiece [Work In Process]](https://media.printables.com/media/prints/660789/images/5205811_0cb2a7a9-743b-4260-87ee-4041f1bf48b9_8471e325-4a9f-4442-ad31-81a2a442fa4a/trail_piece.jpg)
