Easily Remount Polymaker to Bambu Spools v9.0 - 4 Step Process UPDATED
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Easily Remount Polymaker to Bambu Spools 4 Step Process
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 67
- Makes
- 0
- Views
- 987
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
V9 Entrance is now easier to push in
__________________________________________________________________________
Now with Directional Arrow
This Model is curved all the way around allowing for easier compression into the spool
Step 1 Rip off Cardboard side of spool that DOESN'T have the filament line on the inside of it
For Clarification look inside the new spool and you will see the line
Step 2 Place object in following the arrows lining it up with the filament line inside to not break it but so that its on the edge so that the Bambu Spool slides in beside it
Step 3 Insert bambu Spool Thicker Nipple Sideand align it to the object
Step 4 Flip Spool over, Rip off Cardboard side, insert Bambu Small Side and twist
__________________________________________________________________________
I printed this in ASA at 100infill, you want them to last
YOU Have to Force it in
support is needed for the bottom cutout but that all
Want to buy me a Slice of Pizza? http://buymeacoffee.com/TheTexMech