P
PrintablesChris Inguelph
1LB propane tank and solder holder
Holds a 1LB propane tank and solder
- Downloads
- 26
- Likes
- 5
- Rating
- 0
Search results: propan
199 models
P
PrintablesMrKit
Residential Propane Tanks - O/HO/N Scale
Standard Residential Propane Tanks Available Scales: N (1:160), HO (1:87) and O (1:48) Overview: Elevate the realism of your model layouts and dioramas with our Standard Residential Propane Tanks. These tanks come in 150-gallon,…
- Downloads
- 866
- Likes
- 112
- Rating
- 5
P
PrintablesCupo
Gas Bottle Tool, Propane Gas for Camping
This dual-purpose gasbottle key serves two main functions: Easily remove and secure the black protective cap of the gas bottle. Assist in connecting the gas bottle to a hose. Main features: Magnetic Feature: A 2mm magnet is embedded in…
- Downloads
- 664
- Likes
- 104
- Rating
- 5
P
PrintablesDocPO
20 lb propane tank cap
Fits a Type I Outlet. This is modeled after a 15⁄16" Female ACME. This should fit barbecue grill cylinders manufactured after October 1994. I printed with PETG 0.15-0.20 layer height.
- Downloads
- 643
- Likes
- 42
- Rating
- 4.86
P
PrintablesDaTryhard22
1/10 Scale 5lb Propane Tank - Multicolor - High Detail
Here is a highly detailed, multicolor-ready, 1/10 scale model of a 5lb propane tank. Due to the number of different colors on each layer, the multicolor prints will take a very long time and generate a substantial amount of waste…
- Downloads
- 621
- Likes
- 127
- Rating
- 5
P
Printablescjnaz
ACME / QCC Type 1 propane female cap and male plug
The threads are designed to have a 10 degree taper on the "bottom" side to match the ACME thread surface it engages, and flat on the "top" to minimize unnecessary binding. The plug has an center tapered seat that engages the propane hose…
- Downloads
- 596
- Likes
- 53
- Rating
- 5
P
PrintablesJohn S
Propane Torch Holder
Just a simple holder for 14 oz (400g) propane tanks. Print instructions Category: Tools Print Settings Supports: No
- Downloads
- 545
- Likes
- 52
- Rating
- 5
P
PrintablesMS_Manufacturing
Scale Propane gas bottle
1/10 Scale Propane gas bottle
- Downloads
- 502
- Likes
- 54
- Rating
- 4
P
PrintablescluckOmatic
Disposable Bottle/Camping Propane bottle stand.
Printed with no supports. PLA.
- Downloads
- 450
- Likes
- 77
- Rating
- 5
P
PrintablesMartin Rejsek
Isopropanol/bottle holder for honeycomb storage wall
Holder primary designed for 1L of Isopropylalcohol bottle, but in general for any bottle. For taller bottles there is additional ‘fencing’.
- Downloads
- 413
- Likes
- 86
- Rating
- 5
P
Printablesltlowe
Oxy-Mapp / Oxy-Propane Tank Holder
A holder for Oxy-Mapp or Oxy-Propane torch tanks with carry handle and a spot for lighter and torch when not in use. I designed this to fit two standard North America size Berzomatic style Hand Torch Cylinders. 14.1 oz Propane 16 oz Mapp…
- Downloads
- 384
- Likes
- 29
- Rating
- 5
P
PrintablesCaleb_3D
Trichter für Kaffeefilter, Filter Isopropanol oder Likör, ISO, Resin, funnel, Dual Trichter
Hallo ich habe hier einen Trichter im Trichter quasi so das wenn man nen Kaffeefilter rein macht das ISO z.B. dann nicht nur unten sondern auch seitlich gefiltert werden kann. gedruckt habe ich diesen mit PLA, wie PLA auf dauer auf…
- Downloads
- 383
- Likes
- 29
- Rating
- 5
P
Printablessetnicka
Butane-propane camping tank cap
Cap for butane-propane camping tank. It is good to cover valve of your butane tank to protect it from getting dirty. This is simple cap designed for Coleman C500. But it should fit on any similar tank. If you want to modify this you can…
- Downloads
- 357
- Likes
- 83
- Rating
- 4.17
P
PrintablesFantastic Plastic Person
1lb Propane Cylinder Cap
A cap for a one pound propane cylinder, used to keep it clean and protect the treads. It should be printed in TPU and without supports.
- Downloads
- 336
- Likes
- 68
- Rating
- 5
P
Printablesmscalora
US Propane Tank dust cap with paracord tether lug
Added a paracord lug to the blank dust cap model PrusaSlicer PROJECT file included along with a naked STL See upstream project for details I also added three tiny paracord lug models you can put in your “gallery” for slicer remixing
- Downloads
- 297
- Likes
- 41
- Rating
- 5
P
PrintablesAdrian Herbez
Small Propane Tank (1:18 scale)
Outfit your figures with the best in portable hydrocarbon storage with this propane tank! This is a relatively quick print, so I've also included a plate with 9 of them, in case you'd like to get your propane and propane accessory side…
- Downloads
- 295
- Likes
- 31
- Rating
- 5
P
PrintablesKyleG
Propane Hose Dust Plug
Dust plug for a propane hose to keep debris out and protect the mating face. Prints upright without support. STL, Fusion 360, and STEP files are included. Category: Household
- Downloads
- 283
- Likes
- 18
- Rating
- 4
P
PrintablesSomeKyleGuy
1 Pound Propane Tank Holder
Just a simple crate to hold four 1 lb propane tanks. Fits any LP gas tanks measuring 100mm or less in diameter. Provides a stable base for four tanks so they do not fall over or roll away in winds or when in boats/vehicles. I use mine on…
- Downloads
- 278
- Likes
- 36
- Rating
- 0
P
PrintablesHaryn
Propane or Mapp Gas Cylinder Holder
Simple wall mountable propane/mapp gas cylinder holder. Print Settings Resolution: 0.28mm Infill: 30%
- Downloads
- 252
- Likes
- 17
- Rating
- 5
P
Printablesltlowe
Propane Tank Spacer Ring
I didn't like the aluminum spacers that came with the tank monitor set so I made my own spacer ring to lift a 20 lb North American Propane tank by 10mm for use with Mopeka style sensors. I don't have a Mopeka “Halo” to compare, but this…
- Downloads
- 248
- Likes
- 47
- Rating
- 5
P
PrintablesXero
Propane Torch Knob (BernzOmatic)
The knob on my propane torch snapped when I dropped it. So I made a new knob with the features we all love like press fit and knarled. Have a great day!
- Downloads
- 243
- Likes
- 8
- Rating
- 0
P
PrintablesHanselcj
Propane Tank Valve Wrench
I do a lot of grilling and where I live everything is tank exchanges. You get an inspected tank every time, which is good! The bad thing is they use a 400lb gorilla to close the valve down before it leaves the blue rhino facility.…
- Downloads
- 224
- Likes
- 33
- Rating
- 4.83
P
PrintablesInqEnzo
Propane tool thread protector
After downloading and making a propane cap for a 20lbs tank I thought it would be nice to protect the threads on my propane heater and propane torch that I connect to that tank. So here you go a threaded cap that will protect those hose…
- Downloads
- 216
- Likes
- 19
- Rating
- 5
P
PrintablesD-man5005
Camping Propane Wall Holder
I needed a holder to wall-mount a camping propane bottle (the shorter, fatter green bottles). This does the job well, you can use two screws or two #10 bolts to mount this to a wall.
- Downloads
- 214
- Likes
- 32
- Rating
- 4.67
P
PrintablesDarbooka
Propane tank heater stand for Coleman 1lb tanks
Made this for a heater that attaches to a Coleman 1lb propane tank. Without the stand, the slightest nudge would make it fall over. With the stand, it can be smacked around and will stay upright. Printed in PETG, no supports, 15% gyroid…
- Downloads
- 210
- Likes
- 17
- Rating
- 5
P
PrintablesMike
Propane tank wrench
this is my simple design for a propane tank wrench. Printed in pla Print instructions Printer Brand: Prusa Rafts: No Supports: No Resolution: 0,2 Infill: 20
- Downloads
- 207
- Likes
- 26
- Rating
- 5
P
PrintablesNerdMomma
1lb Coleman Propane Base
Hubby needed a base for a 1lb Coleman propane bottle. I just did a little math and increase the original file in size by 1.36. Category: Outdoor & Garden
- Downloads
- 184
- Likes
- 20
- Rating
- 4
P
Printablesasylumph9
G-Scale 1:29 Liquefied 3in Propane Tank And Frames
Very easy to make liquefied propane tank, just make 2 ends, insert 2"x4" pipe in the center to hold the two pieces together and make two tank support frames! One day I'll do a remix making it more round instead of choppy!
- Downloads
- 169
- Likes
- 37
- Rating
- 0
P
PrintablesKovs
Camping Propane Wall Holder
No changes made to file except being scaled to proper size. Thank you @D-man5005 for the design.
- Downloads
- 147
- Likes
- 28
- Rating
- 0
P
Printablesbsurfn99
propane bottle base
This is an add on base for your propane bottle into in order to provide for better stability. I had a banged up bottle that would not stand up on it's own, so this adapt was then made, worked out great. Category: Tool Holders & Boxes
- Downloads
- 140
- Likes
- 19
- Rating
- 5
P
PrintablesCodex Fons
Propane tank secret container
This is a quick modification of duanesdiesel's scale propane tank that turns the model into a secret storage/stash container. The two parts friction-fit together tightly. Can be scaled, but make sure to scale both parts exactly the same…
- Downloads
- 133
- Likes
- 29
- Rating
- 0
P
PrintablesJohn S
Propane Tank Dust Cap
Just a simple dust cap for propane tanks used on grills. Meant to be printed with a flexible material. I used a 95A hardness TPU. Print instructions Category: Outdoor & Garden Print Settings Rafts: No Supports: No Filament: Whatever TPU…
- Downloads
- 132
- Likes
- 16
- Rating
- 4.5
P
PrintablesLuke
Propane Bottle Venting Cap (for 1lb bottle)
I found this cap, which is pretty much perfect. https://www.thingiverse.com/thing:3164779 I also found this plug, which is cool, but not easily removable. https://www.printables.com/model/25391-1lb-propane-discharge-plug I decided to…
- Downloads
- 128
- Likes
- 16
- Rating
- 5
P
PrintablesSimon Tiplady
30mm Propane Handwheel Adapter V2
Handwheel for use with the 30mm propane gas regulator fittings typically found on UK caravan's. Rebuilt in Fusion360 with rounded edges.
- Downloads
- 128
- Likes
- 16
- Rating
- 0
P
PrintablesThinner42
Propane gas wrench for BBQ tanks
This is a simple wrench to attach pressure reducer or horses to small propane tanks. This design is the fourth iteration of the design and is the sturdiest so far. Text can be added inside the flat spot in the handle portion. Printing The…
- Downloads
- 126
- Likes
- 17
- Rating
- 5
P
Printablespennyfarmer
1lb propane tank caddy
WARNING: Hold the center piece while fitting the top on. I was forcing the top on the third one I've printed and the center piece broke. I was holding the base when it happened. I may add some tolerance to the connection to make it…
- Downloads
- 107
- Likes
- 90
- Rating
- 0
P
PrintablescluckOmatic
14.1 oz propane/mapp cylinder stand
Just my take on a stand to keep my mapp torch upright.
- Downloads
- 103
- Likes
- 7
- Rating
- 5
P
PrintablesOG_3D
Bottle holder for Isopropanol
Bottle holder for Isopropanol two drill holes for wall mounting suitable for 1 litre bottles
- Downloads
- 102
- Likes
- 10
- Rating
- 5
P
PrintablesRoggason
Wall-Mounted Isopropanol Bottle Holder – 750 ml Spray, Support-free 3D Print
🧴 Support-free Wall Holder for 750 ml Isopropanol Bottles This 3D-printed wall holder is designed to securely hold a 750 ml isopropanol spray bottle , keeping your workspace tidy and your cleaning supplies within easy reach. The design is…
- Downloads
- 99
- Likes
- 12
- Rating
- 0
P
PrintablesGrafton 1046
Propane Torch Pegboard Mount
Holder for a standard propane bottle on 1" spaced pegboard with “More Fire” debossed on the front. Can be split into parts in prusa slicer for mmu printing.
- Downloads
- 97
- Likes
- 10
- Rating
- 5
P
PrintablesBuffster08
Honda EU2000 Propane / Natural Gas Conversion
This adapter sits between the carburetor and the airbox to provide injection of natural gas or propane wile still allowing for full function of gasoline. I printed this in TPU so it would self seal. I used this in conjunction with a KN…
- Downloads
- 94
- Likes
- 9
- Rating
- 0
P
PrintablesSimon Tiplady
Propane Handwheel - Gas Spanner V1
Handwheel for use with the 30mm propane gas regulator fittings typically found on UK caravan's. New version available here: https://www.printables.com/model/490632-30mm-propane-handwheel-adapter
- Downloads
- 93
- Likes
- 8
- Rating
- 0
P
PrintablesSean Roach
Newer Propane bottle plug
Dad needed some plugs to keep dirt and debris out of his propane cylinders. I'm sharing both models. This one is for the newer propane bottles that have threads on the inside and outside. It's the same model, but this one was shortened to…
- Downloads
- 93
- Likes
- 10
- Rating
- 0
P
Printablesculturestate
German propane hose / regulator dust cap (DIN 477)
Should fit all DIN 477 / JIS m22-14 / BS 341 Nr. 8 / W21.8-14 / .860" x 1/14 fittings with left-handed threads. Threads are designed slightly undersized for looser tolerances when printing.
- Downloads
- 92
- Likes
- 8
- Rating
- 4
P
PrintablesGerryPB
Knob for propane cover lid
Knob for the Camco RV propane cover lid. The one it comes with is a bit small and is difficult to use. The thread is #10-32. A360 view https://a360.co/2pmbelL Print instructions Category: Replacement Parts Print Settings Supports: No…
- Downloads
- 91
- Likes
- 4
- Rating
- 4.5
P
Printableskaje
Base for Small Propane or MAPP Gas Tank
This is a base to help stabilize a small tank/torch combination, when you need to use it hands-free. This is for a tank 74.25mm in diameter. Although these small tanks will stand upright on their own, they tend to be top-heavy and prone…
- Downloads
- 90
- Likes
- 16
- Rating
- 3
P
PrintablesTwentySix2
Propane Bottle Anti-tip Base
I got tired of my torches tipping over - lots of times I will be using them, lit, on a work bench but the standard bases are quite narrow and tippy, particularly if they get dinged at all. These are printed out of TPU and slide securely…
- Downloads
- 89
- Likes
- 34
- Rating
- 0
P
PrintablesDmK
Propane Cylinder Base
Get the right version for your cylinder: either 14.1 or 16 oz. These are designed to be printed with TPU. How I Printed: I printed with NinjaTek Cheetah TPU (shore hardness 95A) with the following settings: Layer Height: 0.2 mm Infill:…
- Downloads
- 89
- Likes
- 8
- Rating
- 0
P
PrintablesKeilTheOld
holder designed to keep Bernzomatic propane and MAP bottles upright
Holder designed to screw to a board and keep Bernzomatic propane and MAP bottles upright. The bottle slides into the top and will stop at the seam holding it firmly.
- Downloads
- 87
- Likes
- 18
- Rating
- 5
P
PrintablesKenny "XDr4g0nX" Verhoeven
Madbull Propane Adapter Cap
I recently bought a airsoft GBBR and I didn't want to buy tons of green/red/black gas bottles to use it so I bought a Madbull propane adapter to use on a 465g Coleman propane bottle. However the stem looked a bit fragile in my bag so I…
- Downloads
- 86
- Likes
- 4
- Rating
- 4.5
P
PrintablesRealnuf
500 gallon propane tank (HO scale 1:87)
Generic 500 gallon propane tank in HO scale *smoothed version has rounder sides and support braces are now triangle shaped added a version of the smoothed tank that contains a hollow and a drain hole if you want to resin print these…
- Downloads
- 85
- Likes
- 12
- Rating
- 5
P
PrintablesEvan Looney
Two Piece Wall Mount Propane Torch Holder
Easy to print two piece wall mounted Propane Torch holder. The two piece design makes printing easy but you will need to ensure the parts are aligned on the wall so the torch sits in them correctly. This was easy to do by mounting the top…
- Downloads
- 84
- Likes
- 4
- Rating
- 0
P
Printableslouisdedecker
Propane gas bottle wrench
I printed it using a 0,16mm layer height to make the piece extra sturdy, increase the wall loops (6) and sparse infill (40)
- Downloads
- 82
- Likes
- 5
- Rating
- 5
P
PrintablesDrakein3D
Sturdy Propane Tank Feet
These are simple, supportless printable feet that grab on to the bottom of an American-style propane tank and keep it off the ground. This keeps it from leaving rusty rings on your concrete, and from the bottom deteriorating over time.…
- Downloads
- 81
- Likes
- 15
- Rating
- 0
P
PrintablesPixel-Pete
Skadis Halter für 1L Flaschen Isopropanol
Halter für 1L Flaschen Isopropanol für das IKEA Skadis System. Gedruckt mit Sovol SV06 (Düse: 0,4mm / Schichtdicke: 0,2 mm) ##################################################### Holder for 1L bottles of isopropanol for the IKEA Skadis…
- Downloads
- 79
- Likes
- 5
- Rating
- 5
P
PrintablesLHJ Industries
Propane Torch Holder
This propane holder is designed for quick, secure installation and everyday convenience. It features pre-drilled mounting holes compatible with common garage rack systems, but it can also be easily screwed directly into a wall, workbench,…
- Downloads
- 79
- Likes
- 10
- Rating
- 0
P
Printablesgravity
Isopropanol Dispenser 🚰
This dispenser is watertight. However, it's not that easy to get it watertight. Apart from proper print settings some parts have to be sealed with silicone. The design evolves around the physics effect of keeping water inside an upside…
- Downloads
- 78
- Likes
- 79
- Rating
- 0
P
PrintablesLittleJoeMuc
Big bottle holder (Isopropanol)
A holder for big bottles up to 90 mm diameter, mountable with screwing to a wall or wood. Remixed the design from https://www.printables.com/de/social/157513-hammerschmit/about I printed it with paint on supports for the upper arch, in…
- Downloads
- 78
- Likes
- 8
- Rating
- 5
P
PrintablesBuilderJeff
Propane Bottle Mount
This model securely stores two 1lb propane fuel cannisters. There are provisions for bungie cord loops over the bottles' top. Bolt holes are build it to secure inside your camper, truck cap, etc. They are sized for 1/4-20 hardware. This…
- Downloads
- 77
- Likes
- 10
- Rating
- 0
P
PrintablesSneezer
Isopropanol bottle holder
Simple and quick to print ISO bottle holder. Works great with 4 perimeters. I have printed it in PLA. It looks best when you draw the z-seam at the back of the mount. Have fun printing!
- Downloads
- 76
- Likes
- 8
- Rating
- 5
P
PrintablesChopperOriginals
LP Propane Cylinder Valve Indicator - 8 Ears Style
I just modified the Gas Cylinder Valve Indicator from Luma, here on printables to fit my 100 lb propane tank. This tank has the type of valve knob with 8 ears. Picture of the valve attached. If you have the other style with 6 ears. Check…
- Downloads
- 71
- Likes
- 10
- Rating
- 0
P
PrintablesWDNick
Undershelf MAPP / Propane Cylinder Holder
I designed this holder to keep the cylinders off the shelf and save some space as I'm cleaning up and reorganizing my shop. The holes are tilted at 4 degrees so they should not work themselves out although they would probably be fine if…
- Downloads
- 68
- Likes
- 13
- Rating
- 0
P
PrintablesAlloysome
BurnzOmatic Propane Bottle Holder
Bottles tip over, this holder fixes that… Printed at 20% infill True to size, its snug and STAYS on when using DENTED BOTTLES DO NOT FIT
- Downloads
- 68
- Likes
- 17
- Rating
- 0
P
Printablesinfern01555
Flame King LP Propane Tank Cover Access Panel/Cap
If you have any of the “light plastic heavy duty” Flame King LP Propane Tank Cover models on your RV, chances are pretty good you've lost at least one of the caps along the side of the highway somewhere. I've lost two so far, and you…
- Downloads
- 68
- Likes
- 3
- Rating
- 5
P
PrintablesPeter Sutter
1L Isopropanol Spout / 1L Isopropanol Ausgießer
My 1L Isopropanol bottle shipped without spout, hence I designed one myself. You do not need to remove the spout when closing the bottle. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No Resolution:…
- Downloads
- 66
- Likes
- 6
- Rating
- 5
P
PrintablesGROG
Propane Base
After 3 camping disasters, with pots and pans tipping over, I've upgraded the base for my friend's propane stove. There are 2 models available. Possible improvements: print with minimal infill and a screw lid on the bottom to fill with…
- Downloads
- 65
- Likes
- 6
- Rating
- 0
P
PrintablesIllusionistPM
Coleman Propane Stove 5400A700 Replacement Knob
This print replaces the plastic intensity knobs on the old Coleman two burner propane camping stove. Unscrew the screw from the metal stalk, remove it and the thin circular metal "Off" plate if you still have it. Put the plate into the…
- Downloads
- 65
- Likes
- 5
- Rating
- 5
P
PrintablesKeither
Propane cylinder holder
This print holds a 400 g propane or MAPP gas cylinder upright while in use. The cylinders are about 75 mm diameter. It has 3 screw holes in the base so that it can be attached to a piece of wood or bench to improve stability.
- Downloads
- 65
- Likes
- 7
- Rating
- 5
P
Printableswbphelps
Propane tank spacer ring
I tried ltlowe's spacer ring, but my tanks are a bit beat up, and I needed a larger gap. I also added some drain holes to help prevent rusting the tank bottom. Fits most common US 20#, 30#, and 40# tanks (all have the same bottom ring). I…
- Downloads
- 64
- Likes
- 7
- Rating
- 0
P
PrintablesMaking Changes
MAPP or Propane Gas Stand (Sand Filled)
Prints hollow just fill it with any ballast you have, I used Play Sand. I printed it without support for the threads. It could technically use them but I wouldn't bother if you're willing to clip a few strings in post.
- Downloads
- 64
- Likes
- 11
- Rating
- 0
P
PrintablesJim M
Propane Torch Holder
Holds a lit propane torch so the flame is horizontal for hands free work.
- Downloads
- 60
- Likes
- 8
- Rating
- 0
P
PrintablesChopperOriginals
LP Propane Cylinder Valve Indicator -6 Ears Style
I just modified the Gas Cylinder Valve Indicator from Luma, here on printables to fit my 100 lb propane tank. This tank has the type of valve knob with 6 ears. Picture of the valve attached. If you have the other style with 8 ears. Check…
- Downloads
- 58
- Likes
- 11
- Rating
- 5
P
Printablesarnmac
Propane Dust Cap
This is a dust cap for a 20lb propane cylinder. There are two versions available here. 1 has the text “DUST CAP ONLY” and the other has no Text to allow for your own custom text or a logo. No support is needed. Printed with TPU with 25%…
- Downloads
- 58
- Likes
- 7
- Rating
- 5
P
Printablestsangstagangsta
1lbs Propane Tank Holder (x2)
Two 1lbs coleman green canister holder. With two hook loops on the sides to hook and secure it or if you wanted to put multiples the loops should help secure them to each other with a bungee or some rope.
- Downloads
- 54
- Likes
- 5
- Rating
- 0
P
Printableskaje
Cap for Empty Propane/MAPP Cylinder - 4 Versions
This cap is for small (net weight 14.1oz/400g) propane or MAPP gas cylinders which are empty. It is not safe (and in many places not legal) to simply dispose of these empty cylinders in the trash as they are considered hazardous waste.…
- Downloads
- 54
- Likes
- 7
- Rating
- 0
P
PrintablesEpicMount
Propane Tank Ring Stand with Drainage
This separates your propane tank from the surface it rests on to prevent rust stains. PETG recommended to maintain shape during the hot months Slight camber from the center of the ring to drain holes should prevent rust on the bottom of…
- Downloads
- 53
- Likes
- 7
- Rating
- 0
P
PrintablesSean Roach
Older Propane bottle plug
Dad needed some plugs to keep dirt and debris out of his propane cylinders. I'm sharing both models. This one is for the older propane bottles that have only threads on the inside. It fits, but the jury's still out on what propane might…
- Downloads
- 53
- Likes
- 6
- Rating
- 0
P
Printablesroger.f3
Propane tank riser & Mopeka sensor retainer
I needed this to rise the tank above the mounting bolt head for the propane tank mounting tray also retain the Mopeka propane tank sensor centered on the tank bottom. The Mopeka sensors have magnets, but they are not strong enough and it…
- Downloads
- 51
- Likes
- 8
- Rating
- 5
P
PrintablesJura
Propane gas cylinder key | Klíč na plynovou lahev
Easy to print and easy to use key for gas cylinder (hexagon nut). Suitable for use for garden grill, camping car etc. The key stays put on a gas hose, so you wil never have to search tool box for the right key or pliers. Extremely useful…
- Downloads
- 48
- Likes
- 4
- Rating
- 0
P
PrintablesSamP
BernzOmatic Propane Torch Knob
I had a habit of not tightening my torch all the way and coming back to an empty tank (and a garage that smells like propane). This makes it easier to grip and easier to fully tighten the knob. Category: Tools
- Downloads
- 48
- Likes
- 3
- Rating
- 0
P
PrintablesPrintyet
Isopropanol Flaschenhalter
Das ist ein Isopropanol Flaschenhalter für 100ml Flaschen von Amazon. Damit die Flasche schick befestigt werden kann. Es gibt zwei verschiedene Versionen einmal mit Schraublöchern (4mm) zum anschrauben oder halt eine Version zum ankleben…
- Downloads
- 48
- Likes
- 7
- Rating
- 5
P
PrintablesOlias
Propane Tank Regulator Collar Wrench for Weber Grill
Sometimes I find it hard to grip the collar around the propane tank. I wasn't able to find one for a standard Weber regulator. This is only 10mm thick which allow it to slide in between the regulator and the collar. It is just long enough…
- Downloads
- 48
- Likes
- 8
- Rating
- 0
P
PrintablesMirko Kehr
Stand for 11 kg Propane Cylinders
The rust rings on the floor have always bothered me when using gas cylinders. Small pieces of wood under the gas bottle help, but they have to be realigned whenever you move the gas cylinder. These clip-on feet keep the floor clean and…
- Downloads
- 47
- Likes
- 6
- Rating
- 5
P
PrintablesRamonL
Blackstone 17" and 22" griddle propane inlet cap
This is a dust cap mainly to protect the thread and seal of the intake nipple. Its threaded in 9/16-18 UNF and a clearance of .55mm to make it easy to seat, its not made to hold pressure. I printed it with a 0.4mm nozzle and a layer…
- Downloads
- 47
- Likes
- 8
- Rating
- 0
P
PrintablesTBX
Isopropanol Bottle Nozzle KS28
Isopropanol Bottle Nozzle for KS28 bottle thread with cap Print it with tree-organic supports, 100% infill and brim Outer bottle thread diameter 28mm, pitch 3mm. Used the original cap sealing and cut it a little
- Downloads
- 46
- Likes
- 3
- Rating
- 0
P
PrintablesGotwoodcustoms&3d
Propane Tank Table
sitting around are propane fire with no where to put are drinks or other things. i designed a table that fits on the top flange of the propane tank and you can attache a piece of wood to that. easily pops on and off.
- Downloads
- 46
- Likes
- 11
- Rating
- 0
P
PrintablesSzwalkiewicz
Propan 2 micro fpv camera mount
for 19x19 fpv camera Category: R/C Vehicles
- Downloads
- 45
- Likes
- 4
- Rating
- 0
P
PrintablesAndrewY
Natural Gas/Propane Adaptor for Coleman Powermate Pulse Plus 1750
Natural Gas or Propane carb adaptor. Fits between the air cleaner and the carb. Set up to use a 7/16 hose to connect to pressure regulator. Gasoline operation is not affected. Will need longer screws to attach airbox and adaptor as the…
- Downloads
- 45
- Likes
- 3
- Rating
- 0
P
PrintablesFilmatura
MadBull Propane Adapter Cover
The end of broken fill nozzles!!! Fits madbull and its clones, perfectly protects the tip ;)
- Downloads
- 44
- Likes
- 4
- Rating
- 0
P
PrintablesTXT-Tlusty
BOTTLE HOLDER WITH Isopropanol (IPA)
Uchwyt na butelkę IPA z logo Anycubic
- Downloads
- 44
- Likes
- 13
- Rating
- 0
P
PrintablesMearcat
LPG/Propane gas cylinder 3/8" valve cap keeper
Simple cap keeper for camping gas / LPG / propane bottles (1.25/2/3/4 kg) that have a 3/8" LH thread and plastic valve cap - supplied with the Companion branded cylinders (Australia). The keeper securely presses into the plastic cap…
- Downloads
- 43
- Likes
- 8
- Rating
- 0
P
Printablesdavid pacheco
Propane Tank Base Ring
Propane tank TPU base ring. used to eliminate rust ring on ground where tank is placed
- Downloads
- 43
- Likes
- 4
- Rating
- 5
P
PrintablesInnovations 3d
Propane Cylinder Stand for Coleman – Modern and Stable Design
This stand is designed to keep your Coleman propane cylinder stable and secure during use. Its modern design combines functionality and style, featuring a hexagonal texture for a sleek look and an embossed Coleman logo. Compatible with…
- Downloads
- 41
- Likes
- 7
- Rating
- 0
P
Printablesmhparsons
Propane Tank Rack
Modular rack system designed to hold 20 lb. Propane tanks horizontally on a shelf (or floor). Print as many cradles as required and connect them with the links.
- Downloads
- 40
- Likes
- 14
- Rating
- 0
P
PrintablesTony
1LB Propane Discharge Plug
A simple plug to maintain equalized pressure in waste Coleman-style 1lb propane tanks. NOTE: Installing this cap may or may not allow you to dispose of these waste items in your normal disposal stream. Consult your local waste authority.
- Downloads
- 40
- Likes
- 6
- Rating
- 0
P
PrintablesChironex_81
Ikea Skadis tray isopropanol alcohol
This is a Ikea Skadis tray remixed for an isopropanol bottle from Maxxis. The dimensions are 120x50mm.
- Downloads
- 38
- Likes
- 5
- Rating
- 0
P
PrintablesNick Danger
Camco Propane Tank Cover Nut Replacement
A much easier to use hand nut for the top lid of a Camco Propane Tank Added two versions that use a heatset thread insert (M5x9.5) - https://www.amazon.com/ruthex-Threaded-Insert-Pieces-Ultrasound/dp/B07YSVXWS8/ref=sr_1_1_sspa?th=1
- Downloads
- 38
- Likes
- 3
- Rating
- 5
P
Printablesrsilvers
Propane Torch 91037 to Burnz-o-matic cylinder Boring Company Flame Thrower
When making a Boring Company style (not a) flame thrower, I needed to adapt the left-hand threads of the wand to a Burnz-o-Matic extension hose to use blue cylinders. I tested for leaks using soapy water, and it was leaking all over, so…
- Downloads
- 38
- Likes
- 2
- Rating
- 0
P
PrintablesTD3D
Linear Rail Isopropanol clean box
Fits for LGM9H and LGM12H Different lenghts available. Integrated holder keeps the linear rails in position while cleaning. The funnel-shaped end helps with emptying. 250, 300, 350, 400mm. Can be printed in 2 pieces and then glued together
- Downloads
- 37
- Likes
- 11
- Rating
- 5
P
PrintablesFusilier
Jerry Can / Fuel Can / Propane Tank Tag
I use these tags on all my fuel/propane containers. I manually turn the indicator dial as I use the container and I can tell their status at a glance, even across a crowded garage. Be careful when gluing on the knob so that you do not…
- Downloads
- 37
- Likes
- 11
- Rating
- 0