Liczymy pasujące modele…
Handwheel for use with the 30mm propane gas regulator fittings typically found on UK caravan's. New version available here: https://www.printables.com/model/490632-30mm-propane-handwheel-adapter
Dad needed some plugs to keep dirt and debris out of his propane cylinders. I'm sharing both models. This one is for the newer propane bottles that have threads on the inside and outside. It's the same model, but this one was shortened to…
Standard Residential Propane Tanks Available Scales: N (1:160), HO (1:87) and O (1:48) Overview: Elevate the realism of your model layouts and dioramas with our Standard Residential Propane Tanks. These tanks come in 150-gallon,…
This dual-purpose gasbottle key serves two main functions: Easily remove and secure the black protective cap of the gas bottle. Assist in connecting the gas bottle to a hose. Main features: Magnetic Feature: A 2mm magnet is embedded in…
Fits a Type I Outlet. This is modeled after a 15⁄16" Female ACME. This should fit barbecue grill cylinders manufactured after October 1994. I printed with PETG 0.15-0.20 layer height.
Here is a highly detailed, multicolor-ready, 1/10 scale model of a 5lb propane tank. Due to the number of different colors on each layer, the multicolor prints will take a very long time and generate a substantial amount of waste…
The threads are designed to have a 10 degree taper on the "bottom" side to match the ACME thread surface it engages, and flat on the "top" to minimize unnecessary binding. The plug has an center tapered seat that engages the propane hose…
Just a simple holder for 14 oz (400g) propane tanks. Print instructions Category: Tools Print Settings Supports: No
1/10 Scale Propane gas bottle
Printed with no supports. PLA.
Holder primary designed for 1L of Isopropylalcohol bottle, but in general for any bottle. For taller bottles there is additional ‘fencing’.
A holder for Oxy-Mapp or Oxy-Propane torch tanks with carry handle and a spot for lighter and torch when not in use. I designed this to fit two standard North America size Berzomatic style Hand Torch Cylinders. 14.1 oz Propane 16 oz Mapp…
Hallo ich habe hier einen Trichter im Trichter quasi so das wenn man nen Kaffeefilter rein macht das ISO z.B. dann nicht nur unten sondern auch seitlich gefiltert werden kann. gedruckt habe ich diesen mit PLA, wie PLA auf dauer auf…
Cap for butane-propane camping tank. It is good to cover valve of your butane tank to protect it from getting dirty. This is simple cap designed for Coleman C500. But it should fit on any similar tank. If you want to modify this you can…
A cap for a one pound propane cylinder, used to keep it clean and protect the treads. It should be printed in TPU and without supports.
Added a paracord lug to the blank dust cap model PrusaSlicer PROJECT file included along with a naked STL See upstream project for details I also added three tiny paracord lug models you can put in your “gallery” for slicer remixing
Outfit your figures with the best in portable hydrocarbon storage with this propane tank! This is a relatively quick print, so I've also included a plate with 9 of them, in case you'd like to get your propane and propane accessory side…
Dust plug for a propane hose to keep debris out and protect the mating face. Prints upright without support. STL, Fusion 360, and STEP files are included. Category: Household
Just a simple crate to hold four 1 lb propane tanks. Fits any LP gas tanks measuring 100mm or less in diameter. Provides a stable base for four tanks so they do not fall over or roll away in winds or when in boats/vehicles. I use mine on…
Simple wall mountable propane/mapp gas cylinder holder. Print Settings Resolution: 0.28mm Infill: 30%
I didn't like the aluminum spacers that came with the tank monitor set so I made my own spacer ring to lift a 20 lb North American Propane tank by 10mm for use with Mopeka style sensors. I don't have a Mopeka “Halo” to compare, but this…
The knob on my propane torch snapped when I dropped it. So I made a new knob with the features we all love like press fit and knarled. Have a great day!
I do a lot of grilling and where I live everything is tank exchanges. You get an inspected tank every time, which is good! The bad thing is they use a 400lb gorilla to close the valve down before it leaves the blue rhino facility.…
After downloading and making a propane cap for a 20lbs tank I thought it would be nice to protect the threads on my propane heater and propane torch that I connect to that tank. So here you go a threaded cap that will protect those hose…
I needed a holder to wall-mount a camping propane bottle (the shorter, fatter green bottles). This does the job well, you can use two screws or two #10 bolts to mount this to a wall.
Made this for a heater that attaches to a Coleman 1lb propane tank. Without the stand, the slightest nudge would make it fall over. With the stand, it can be smacked around and will stay upright. Printed in PETG, no supports, 15% gyroid…
this is my simple design for a propane tank wrench. Printed in pla Print instructions Printer Brand: Prusa Rafts: No Supports: No Resolution: 0,2 Infill: 20
Hubby needed a base for a 1lb Coleman propane bottle. I just did a little math and increase the original file in size by 1.36. Category: Outdoor & Garden
Very easy to make liquefied propane tank, just make 2 ends, insert 2"x4" pipe in the center to hold the two pieces together and make two tank support frames! One day I'll do a remix making it more round instead of choppy!
No changes made to file except being scaled to proper size. Thank you @D-man5005 for the design.
This is an add on base for your propane bottle into in order to provide for better stability. I had a banged up bottle that would not stand up on it's own, so this adapt was then made, worked out great. Category: Tool Holders & Boxes
This is a quick modification of duanesdiesel's scale propane tank that turns the model into a secret storage/stash container. The two parts friction-fit together tightly. Can be scaled, but make sure to scale both parts exactly the same…
Just a simple dust cap for propane tanks used on grills. Meant to be printed with a flexible material. I used a 95A hardness TPU. Print instructions Category: Outdoor & Garden Print Settings Rafts: No Supports: No Filament: Whatever TPU…
I found this cap, which is pretty much perfect. https://www.thingiverse.com/thing:3164779 I also found this plug, which is cool, but not easily removable. https://www.printables.com/model/25391-1lb-propane-discharge-plug I decided to…
Handwheel for use with the 30mm propane gas regulator fittings typically found on UK caravan's. Rebuilt in Fusion360 with rounded edges.
This is a simple wrench to attach pressure reducer or horses to small propane tanks. This design is the fourth iteration of the design and is the sturdiest so far. Text can be added inside the flat spot in the handle portion. Printing The…
WARNING: Hold the center piece while fitting the top on. I was forcing the top on the third one I've printed and the center piece broke. I was holding the base when it happened. I may add some tolerance to the connection to make it…
Just my take on a stand to keep my mapp torch upright.
Bottle holder for Isopropanol two drill holes for wall mounting suitable for 1 litre bottles
🧴 Support-free Wall Holder for 750 ml Isopropanol Bottles This 3D-printed wall holder is designed to securely hold a 750 ml isopropanol spray bottle , keeping your workspace tidy and your cleaning supplies within easy reach. The design is…
Holder for a standard propane bottle on 1" spaced pegboard with “More Fire” debossed on the front. Can be split into parts in prusa slicer for mmu printing.
Should fit all DIN 477 / JIS m22-14 / BS 341 Nr. 8 / W21.8-14 / .860" x 1/14 fittings with left-handed threads. Threads are designed slightly undersized for looser tolerances when printing.
This adapter sits between the carburetor and the airbox to provide injection of natural gas or propane wile still allowing for full function of gasoline. I printed this in TPU so it would self seal. I used this in conjunction with a KN…
Knob for the Camco RV propane cover lid. The one it comes with is a bit small and is difficult to use. The thread is #10-32. A360 view https://a360.co/2pmbelL Print instructions Category: Replacement Parts Print Settings Supports: No…
This is a base to help stabilize a small tank/torch combination, when you need to use it hands-free. This is for a tank 74.25mm in diameter. Although these small tanks will stand upright on their own, they tend to be top-heavy and prone…
I got tired of my torches tipping over - lots of times I will be using them, lit, on a work bench but the standard bases are quite narrow and tippy, particularly if they get dinged at all. These are printed out of TPU and slide securely…
Holder designed to screw to a board and keep Bernzomatic propane and MAP bottles upright. The bottle slides into the top and will stop at the seam holding it firmly.
Generic 500 gallon propane tank in HO scale *smoothed version has rounder sides and support braces are now triangle shaped added a version of the smoothed tank that contains a hollow and a drain hole if you want to resin print these…
I recently bought a airsoft GBBR and I didn't want to buy tons of green/red/black gas bottles to use it so I bought a Madbull propane adapter to use on a 465g Coleman propane bottle. However the stem looked a bit fragile in my bag so I…
Easy to print two piece wall mounted Propane Torch holder. The two piece design makes printing easy but you will need to ensure the parts are aligned on the wall so the torch sits in them correctly. This was easy to do by mounting the top…
I printed it using a 0,16mm layer height to make the piece extra sturdy, increase the wall loops (6) and sparse infill (40)
These are simple, supportless printable feet that grab on to the bottom of an American-style propane tank and keep it off the ground. This keeps it from leaving rusty rings on your concrete, and from the bottom deteriorating over time.…
Halter für 1L Flaschen Isopropanol für das IKEA Skadis System. Gedruckt mit Sovol SV06 (Düse: 0,4mm / Schichtdicke: 0,2 mm) ##################################################### Holder for 1L bottles of isopropanol for the IKEA Skadis…
This dispenser is watertight. However, it's not that easy to get it watertight. Apart from proper print settings some parts have to be sealed with silicone. The design evolves around the physics effect of keeping water inside an upside…
A holder for big bottles up to 90 mm diameter, mountable with screwing to a wall or wood. Remixed the design from https://www.printables.com/de/social/157513-hammerschmit/about I printed it with paint on supports for the upper arch, in…
This propane holder is designed for quick, secure installation and everyday convenience. It features pre-drilled mounting holes compatible with common garage rack systems, but it can also be easily screwed directly into a wall, workbench,…
Simple and quick to print ISO bottle holder. Works great with 4 perimeters. I have printed it in PLA. It looks best when you draw the z-seam at the back of the mount. Have fun printing!
This model securely stores two 1lb propane fuel cannisters. There are provisions for bungie cord loops over the bottles' top. Bolt holes are build it to secure inside your camper, truck cap, etc. They are sized for 1/4-20 hardware. This…
I just modified the Gas Cylinder Valve Indicator from Luma, here on printables to fit my 100 lb propane tank. This tank has the type of valve knob with 8 ears. Picture of the valve attached. If you have the other style with 6 ears. Check…
I designed this holder to keep the cylinders off the shelf and save some space as I'm cleaning up and reorganizing my shop. The holes are tilted at 4 degrees so they should not work themselves out although they would probably be fine if…
If you have any of the “light plastic heavy duty” Flame King LP Propane Tank Cover models on your RV, chances are pretty good you've lost at least one of the caps along the side of the highway somewhere. I've lost two so far, and you…
My 1L Isopropanol bottle shipped without spout, hence I designed one myself. You do not need to remove the spout when closing the bottle. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No Resolution:…
After 3 camping disasters, with pots and pans tipping over, I've upgraded the base for my friend's propane stove. There are 2 models available. Possible improvements: print with minimal infill and a screw lid on the bottom to fill with…
This print holds a 400 g propane or MAPP gas cylinder upright while in use. The cylinders are about 75 mm diameter. It has 3 screw holes in the base so that it can be attached to a piece of wood or bench to improve stability.
This print replaces the plastic intensity knobs on the old Coleman two burner propane camping stove. Unscrew the screw from the metal stalk, remove it and the thin circular metal "Off" plate if you still have it. Put the plate into the…
I tried ltlowe's spacer ring, but my tanks are a bit beat up, and I needed a larger gap. I also added some drain holes to help prevent rusting the tank bottom. Fits most common US 20#, 30#, and 40# tanks (all have the same bottom ring). I…
Prints hollow just fill it with any ballast you have, I used Play Sand. I printed it without support for the threads. It could technically use them but I wouldn't bother if you're willing to clip a few strings in post.
Holds a lit propane torch so the flame is horizontal for hands free work.
I just modified the Gas Cylinder Valve Indicator from Luma, here on printables to fit my 100 lb propane tank. This tank has the type of valve knob with 6 ears. Picture of the valve attached. If you have the other style with 8 ears. Check…
This is a dust cap for a 20lb propane cylinder. There are two versions available here. 1 has the text “DUST CAP ONLY” and the other has no Text to allow for your own custom text or a logo. No support is needed. Printed with TPU with 25%…
This cap is for small (net weight 14.1oz/400g) propane or MAPP gas cylinders which are empty. It is not safe (and in many places not legal) to simply dispose of these empty cylinders in the trash as they are considered hazardous waste.…
This separates your propane tank from the surface it rests on to prevent rust stains. PETG recommended to maintain shape during the hot months Slight camber from the center of the ring to drain holes should prevent rust on the bottom of…
Two 1lbs coleman green canister holder. With two hook loops on the sides to hook and secure it or if you wanted to put multiples the loops should help secure them to each other with a bungee or some rope.
I needed this to rise the tank above the mounting bolt head for the propane tank mounting tray also retain the Mopeka propane tank sensor centered on the tank bottom. The Mopeka sensors have magnets, but they are not strong enough and it…
Easy to print and easy to use key for gas cylinder (hexagon nut). Suitable for use for garden grill, camping car etc. The key stays put on a gas hose, so you wil never have to search tool box for the right key or pliers. Extremely useful…
I had a habit of not tightening my torch all the way and coming back to an empty tank (and a garage that smells like propane). This makes it easier to grip and easier to fully tighten the knob. Category: Tools
Das ist ein Isopropanol Flaschenhalter für 100ml Flaschen von Amazon. Damit die Flasche schick befestigt werden kann. Es gibt zwei verschiedene Versionen einmal mit Schraublöchern (4mm) zum anschrauben oder halt eine Version zum ankleben…
Sometimes I find it hard to grip the collar around the propane tank. I wasn't able to find one for a standard Weber regulator. This is only 10mm thick which allow it to slide in between the regulator and the collar. It is just long enough…
The rust rings on the floor have always bothered me when using gas cylinders. Small pieces of wood under the gas bottle help, but they have to be realigned whenever you move the gas cylinder. These clip-on feet keep the floor clean and…
Isopropanol Bottle Nozzle for KS28 bottle thread with cap Print it with tree-organic supports, 100% infill and brim Outer bottle thread diameter 28mm, pitch 3mm. Used the original cap sealing and cut it a little
This is a dust cap mainly to protect the thread and seal of the intake nipple. Its threaded in 9/16-18 UNF and a clearance of .55mm to make it easy to seat, its not made to hold pressure. I printed it with a 0.4mm nozzle and a layer…
sitting around are propane fire with no where to put are drinks or other things. i designed a table that fits on the top flange of the propane tank and you can attache a piece of wood to that. easily pops on and off.
Natural Gas or Propane carb adaptor. Fits between the air cleaner and the carb. Set up to use a 7/16 hose to connect to pressure regulator. Gasoline operation is not affected. Will need longer screws to attach airbox and adaptor as the…
The end of broken fill nozzles!!! Fits madbull and its clones, perfectly protects the tip ;)
Uchwyt na butelkę IPA z logo Anycubic
Simple cap keeper for camping gas / LPG / propane bottles (1.25/2/3/4 kg) that have a 3/8" LH thread and plastic valve cap - supplied with the Companion branded cylinders (Australia). The keeper securely presses into the plastic cap…
Propane tank TPU base ring. used to eliminate rust ring on ground where tank is placed
This stand is designed to keep your Coleman propane cylinder stable and secure during use. Its modern design combines functionality and style, featuring a hexagonal texture for a sleek look and an embossed Coleman logo. Compatible with…
Modular rack system designed to hold 20 lb. Propane tanks horizontally on a shelf (or floor). Print as many cradles as required and connect them with the links.
A simple plug to maintain equalized pressure in waste Coleman-style 1lb propane tanks. NOTE: Installing this cap may or may not allow you to dispose of these waste items in your normal disposal stream. Consult your local waste authority.
This is a Ikea Skadis tray remixed for an isopropanol bottle from Maxxis. The dimensions are 120x50mm.
A much easier to use hand nut for the top lid of a Camco Propane Tank Added two versions that use a heatset thread insert (M5x9.5) - https://www.amazon.com/ruthex-Threaded-Insert-Pieces-Ultrasound/dp/B07YSVXWS8/ref=sr_1_1_sspa?th=1
When making a Boring Company style (not a) flame thrower, I needed to adapt the left-hand threads of the wand to a Burnz-o-Matic extension hose to use blue cylinders. I tested for leaks using soapy water, and it was leaking all over, so…
Fits for LGM9H and LGM12H Different lenghts available. Integrated holder keeps the linear rails in position while cleaning. The funnel-shaped end helps with emptying. 250, 300, 350, 400mm. Can be printed in 2 pieces and then glued together
I use these tags on all my fuel/propane containers. I manually turn the indicator dial as I use the container and I can tell their status at a glance, even across a crowded garage. Be careful when gluing on the knob so that you do not…
400g Propane Tank Scaled down from 1lb tank to fit 400g propane tank
This thing will hold the propane adapter in place in storage mode.
Ah, the end of camping season in Canada—a time to reflect on all the little tasks I should have done but didn't. One that kept haunting my backcountry dreams was creating a cap for my trusty propane-powered gizmo—the legendary "tiger…
This is currently just work in progress, that I don't know how far it will go. Basically just trying to learn to model things. I will test print when I get the chance. For the moment the dimensions may be off until I get time to figure…
