43 models
The adapter is tight so that there is no play and can withstand the load of the filament. The adapter is attached using the original spool holder screw. The Digital spool rack is attached using the original bayonet. Layer 0.2mm Perimeter…
Print approx. €1.36–€1.66 excl. taxPreliminary estimate for PETGSource material: PET
Unlike the original Prusa XL spool holder which is too large for Master Spools, this remix offers a more compact design specifically for them. While maintaining 100% compatibility with the original setup, the redesigned holder has an…
Print approx. €1.17–€1.43 excl. taxPreliminary estimate for one variant
PrusaXL Purge Tray R1 Few people had issues installing the original. The two clamps options are designed to grip the bed tray outside the foam protected area. The tray is spanning across the print bed retained by the two clamps. Use the…
[edit - the current gcode file prints a model with fairly substantial walls. This makes for a robust moon, but is not ideal for lighting purposes. Currently working on slimming down via the model creation process.] I could not find a moon…
Have developed further on a damn good idea. Change it so there is more room to remove the purge filament.
GCode File Description: Flow Calibration for Prusa XL with Prusa PLA This GCode file is specifically designed for calibrating the material flow (flow rate) on a Prusa XL 3D printer using Prusa PLA filament. The purpose of this file is to…
Prusa XL Filament Dry Box Take 1 Uses the supplied filament supports. At the moment is not really airtight but considerably reduces the filament exposure to humidity, if silica gel pouches are place in the box. Require PC4-M6 couplings.…
Superlube 3oz. tube cap adapter for use in greasing PrusaXL Tool Changer
This is remix of Prusa_i3_MK3S Nozzle brush . Use silicon nozzle brush 5.7mm x 28mm and cut half to get size 5.7mm x 14mm Aliexpress: https://www.aliexpress.com/w/wholesale-silicon-nozzle-brush-for-bambu-lab-a1.html Video:…
Loved the investigation and simple design of this banding fix but I didn't want to use double sided tape so I remixed the model with a spot for a 15mm x 3mm circular magnet.
PrusaXL - Simplified Nozzle Size Marker R1 Still only two parts - simple snap in retainer, with improved indexing spring.
Dial gauge holder with extruder mounting for Steinle dial gauges or other dial gauges with 8mm mountings. Fastening fits into the extruder mounting head on the PrusaXL. The locking mechanism must be operated manually. Messuhr Halter mit…
PrusaXL - Dual Nozzle Size Marker One Ring for nozzle size One Ring for nozzle type
This tool holder can be hung into the extrusion either on the left or right side of the printer. There are two separate base versions for the side. Things you can get organized with the “base” version: The 6 XL Prusa Allan/Torque wrenches…
I had square nuts on hand, but no heat set inserts, so a quick remix it is. This mounts onto the original XL enclosure, and the nuts slip right in. Print with a heat resistant material- ABS/ ASA are preferred, but PETG will work.
I Downloaded the Fusion360 File, made appropriate changes to width and height. Moved it into Inventor (for speed) and cut it to fit, added the border. I split the model to fit on the XL's bed (yes even with a larger bed one can find or…
Prusa XL Filament Dry Box Replaces the supplied filament supports, using the same size screw. Require PC4-M6 couplings and dia3 x 10 mm long dowels for the filament rollers. (optional can use the pins available in the .3mf file) Sizing…
These feet are designed to mount a self-adhesive, dampening foot to the printer. I've gone with some 1.5" Hemispherical Sorbothane feet from Isolate-it , but you can use anything you'd like. Remove the existing feet, leaving the extrusion…
PrusaXL_Extruder WHA/PTFE Inline-Clips Snap-In design, two pieces only. Designed to keep the wires and the PTFE tube within the guiding spring width. Should help reducing the tangle between the different tools. Update: Following some…
Check out the magnetic version : BOM PETG T spring nuts M3 for 3030 - https://a.aliexpress.com/_Eyj33i0 or 3d printed nuts for 3030 for M3 screws M3 screws - 10 mm - https://a.aliexpress.com/_EHrTBG4 A1 silicone brush -…
PrusaXL - Simplified Nozzle Size Marker Only two parts - simple snap in retainer. See the upgraded version: https://www.printables.com/model/761237-prusaxl-simplified-nozzle-size-marker-r1
This is a work in progress. This is a filament drybox that is designed to hold a spool of filament until the spool is deplete. Store the filament in the drybox, mount it onto the printer in the drybox, dry it (using the PolyDryer) in the…
Filament Runout Sensor Bypass for PRUSA XL Connected Boden tube from extruder to back of part. Boden tube does not release after inserting. can be used on either side of the XL Additional Hardware: Boden tube quick disconnect X2 Boden…
PrusaXL, Pi4 case mounting clips. Place your Pi somewhere you can see it! The two clips are identical and they are made for Malolo's screw-less Pi4 case with hex dome cover. Inset the clips horizontally in the extrusion slot and then…
There are two versions of the body, one for the right side and one for the left. Due to the modeled threads for the PTFE connector, mirroring may not work since the threads will be reversed. A left side version is available as an STL. A…
Covers for the hex back cover in Prusa XL. They are held in place with 8x3 magnets. The hole for the magnet is only 2mm deep to not waste unnecessary material. Left and right covers are unique, three middle covers are the same. I…
Modified filler brace to mount directly to the PrusaXL, using the original M5x85 bolts and M5nEs nuts the printer came with. I also added two little protrusions into the 3030 extrusion to help align the brace with the nut, as well as…
This 5kilo spool holder is designed to fit onto the side of the PrusaXL with the original spoolholder screw. It has 8mm of thread out of the bottom to screw into the XL mounting point and is 170mm Long with 165mm being the spool width. I…
PrusaXL Adjustable Idler Pressure with 3 step pressure adjust, without changing springs tension. Redesigned the clamping hinges and replaced the steel spacer with a dial, supporting 3 levels of adjustment. Three dials are available with…
Print your own Prusa XL ….. Photostand :) Use enforced support as shown
PrusaXL Cable Parking Guide Update, 2024/03/12, longer arms/wider opening
Feet to mount 52mm or smaller Sorbothane hemispheres.
PrusaXL Skinny Spool Bearing. Both options can support various spool width. Spool_Bearing_R4.3mf - print in place Spool_Bearing_R3.3mf - made to use proper bearings - recommended
PrusaXL Filament Sensor Frame for PC4-Mxx adapter Allows fitting a pneumatic adapter of you choice without any disassembly. Option 1 frame for PC4-M10; Best Option as the PTFE tube will reach the correct location inside the Filament…
choose "supports everywhere" as support for the hooks mount with m4 locknuts to the profiles
You will need supports. Uncheck “Only on buildplate” in your slicer as it needs supports inside. Print with the 2 protusions facing the bed. PLA is fine. You will need a small M4 CHC screw and a M4 T-nut.
This drybox fits standard diameter spools, of any width. It is compatible with the 2kg Prusament spools. Spools with smaller diameters will not sit on the roller bearings, but should still be compatible as long as they fit around the…
Halterrung für diverse Anbauteile wie z.B. das ESP32-CAM gehäuse. Die Halterrung hat eine Bohrung mit Ø 3,5mm und wird einfach im Aluprofiel eingehängt und über das PrusaXL Abdeckblech eingeklippst.
Of all the upgrades the XL+ has, the spool holders bother me. Loading a spool takes careful alignment. No longer! I contemplated downgrading to the old spool holders, but then a thought struck; I have a 3D printer - I can solve this…
Eibos Easydry PrusaXL Side Mount, Fits above Sunlu S4 dryer on my brackets I also designed. Works with or without Prusa XL Enclosure. Requires 2 3030 nuts and holes are sized for M4x16mm hex socket cap screws My Eibos has the extended box…
During my war with small space for printers, I found place to store all 3 plates for PrusaXL. It is on fencewall, so I made simple model for keep all plates on one place. Of course, it can be mounted on wall, MDF or any vertical surface.…
Be advised; this is just an idea. I don't have the brainpower to figure this out on my own. The end goal is to "just throw on a spool" and the RFID via magic tells the printer what material is (about to be) loaded. There are many projects…
