Counting matching models…
This is an almost exact copy of a lego cup, except it's scaled up 12 times to fit humans! Supports are really only necessary for the underside of the handle and the bottom edge of the cup. It is not recommended to use for drinking because…
Introducing the PoopScoop , a scoop specifically designed to pick up your pet's waste quickly and hygienically. If you are tired of struggling to clean the yard, especially on grassy areas, this 3D model is the perfect solution. ✨ Key…
A small adapter that allows mounting Picattiny-style gear (e.g. a tactical flashlight) on a helmet with OpsCore ARC rails. Requires an 8mm M4 screw and an M4 nut - these are used to tighten the adapter in place and ensure it doesn't slip…
After making my first DUMMY 13 to scale, I wanted a bigger one. I scaled the model parts up to 200% in CURA and got to work. Through trial and error, I needed to make adjustments to 3 parts. 1 - The hands will not print (for me). Scaling…
Had to make max use of my Bambu X1C
This is a tape dispenser for tape with patches for IPSC targets. It can hold a tape 23mm with 1000 patches 20 mm in diameter. The hook must be glued on the back. The screw can be unscrewed with coin €1, €2 or 50 cents. It has an opening…
Diffirent sizes to fulfill your needs. Al the sizes are good for dryfire practice. The smaller ones are good for building micro stages for stage design. Smaller sizes also great to simulate greater distances.
What is it ? This is an IPSC competition shooting belt adapter for affordable Cytac brand F-Speeder series of holsters. EDIT 11.4.2022: Added a Tri-Spacer that you can use instead of the regular holster spacers Different files Laser-cut…
Das ist mein Closetsnap oder Kleiderschrank-schliesser! Die Anwendung ist einfach, Ausdrucken, dann den Haken an der Schrank Innenseite an die Gewünschte Stelle halten und Mit zwei Schrauben durch die Löcher Fixieren. Danach messen sie…
Mon support d'origine est resté collé sur mon ancienne voiture… Du coup, j'en ai modélisé un nouveau… Impression en deux morceaux, une petite goutte de colle entre les deux, et un morceau de double face, et le tour est joué !
Copy of Lego cup (Item No: 3899 ) based on my own measurements. Best use as pencil holder (note: it cannot hold water). Be careful if you want to scale down the model. The tolerances for the couplings may be too small. Assembly video…
Hochkippschaufel für die Bruderfrontlader Aufnahme. Prototyp für manuellen Betrieb, keine RC Funktion in dem Modell Verfügbar. würde mich über ein Feedback freuen.
IPSC Patch Dispenser Remixed to dispense 25mm or 1 inch patches. Example prints done in ASA.
A work in progress. This set is made to a 1-36 scale based on IDPA and IPSC targets and designed so you can lay out a course or event on 1x1 inch grid paper where 1 inch = 1 yard. I designed it for a 0.4mm nozzle and 0.2mm layer height…
Introducing the PrintCore SnapScrape. This isn’t just any old 3d printer scraper that you print, use, then throw away. This scraper has multipule features indluding, removable scraper, hook (for getting those horrible parts of filament…
Hook for attaching the strap of a headlamp (such as a Petzl headlamp) or goggles to the Opscore ARC rail of a tactical helmet. Attach one hook on each side of the helmet ARC rail with the hook facing forward, then adjust the strap length…
Glock mag pouch & belt mount for IPSC belt
Recommend printing with 50% infill to provide plenty of strength to hold speaker. Mounting Instructions: Remove the set screw that attaches the original metal stand from the base of the speaker. You will use the set screw from the…
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 25% Supports needed Scale it as you like :)
Print the Cap for the “Big Membran” in PLA/PETG/ASA Print the Cap for the “little Cap” in TPU to snap it over without locking it on the tube.
Scalable IPSC targets with stands for dryfire practice. Print multiple targets scaled according to your needs along their x- & y-axes and place them around to practive dryfire on. Get the best results by printing “large” models for…
Um die Topfscharniere von Ikea an eigenen Projekten benutzen zu können, habe ich mir diese Schablonen zusammengestellt, um so einfach wie möglich zu markieren wo die Löscher hin müssen. Für meinen Fall (19mm Bretter und 3mm Tür Abstand…
Limit the magazine capacity of a CZ 75 SP-01 Shadow from 18 to 15 shots to easier comply with IPSC production rules. Will probably work on most similar guns. Attaches to the magazine spring.
(4) M3 x 4mm x 5mm inserts (4) M3 x 12mm screws (1) 25mm magnet, 4mm mounting screw. I went with a covered ~30lb strength
3D model of International Practical Shooting Confederation (I.P.S.C.) emblem / logo. Various size versions of the emblem are available: 75 x 92 mm 100 x 122 mm 120 x 147 mm 150 x 184 mm The provided 3MF files contain all parts (STL…
Ersatzteile Kippschere für Kellerfenster ähnlich MEA 41 A 290 und 41 A 291 Spare parts for basement windows similar to MEA 41 A 290 und 41 A 291 2026-08-12: Revision 001 mit bespiegelter Führungsnut ergänzt. Nur CAD Modell geändert, nicht…
We designed a custom measurement boxes according to the rulebooks with 7.5mm thick walls for increased durability. Actual internal dimensions of the 3D model (tolerance included) 226mm x 151mm x 46mm Rulebook internal dimensions 225mm x…
Designed in need to hold a magnet on an IPSC outer belt. It's used to hold full ammo magazines when used in IPSC shooting. It consists of 2 parts to hold on the belt as shown in pictures. To assemble you need 4 M4 nuts and M4x16 bolts. I…
I designed some parts for DIY Klipsch-style speakers. I got inspired by the RP-600M speakers. Design Speaker Horn (2-part) designed for Peerless D19TD05-08 Tweeter, but may fit others. 6.5" Woofer "FR-65YL-M" from aliexpress. Woofer Trim…
UPDATE 20.12.23 - Added a tray that hold 20 20x20 mini I'm realy beinging to get excited for Warhammer Old World, and to that end I've been building up a bretonnia army, its got to the poin they need movment trays, and so now they have…
Adapter board to mate the Amazon Power supply board below to the OEM mount holes. Requires 4 M4 screws. Power supply link: https://www.amazon.com/dp/B07GWCPTQB?psc=1&ref=ppx_yo2ov_dt_b_product_details
Here is a basic IPSC logo, with colours separated by heights, so you can print them with filament swapping to get it printed correctly. I have made this kind of designs into patches for my range bag and such. Category: Sport & Outdoors…
EN: One of the guide hooks on grandma's fridge has broken due to age (or grandma's strength :D). So a replacement part was needed. This is a guide used for follower hinges on built-in refrigerators behind furniture doors. They are largely…
Best printed with TPU. You can adapt the infill percentage to the stiffness of your material. When using material softer than 98A shore hardness, I recommend using the shorter flag. Otherwise it will bend during printing and start messing…
+ Löcher + Größer
This seatpost clamp is designed for 27.2 mm seatposts and M5 hardware, allowing you to mount anything you want to it. I'd suggest printing this in PETG, due to this material's flexibility. I used 4 walls and 100% infill, which still…
4 or 3 parts in total: body, cover, screw and wrench (wrench is optional). Any plastic of your choice. Minimum supports (locally on cover and key). Shooting Stickers: https://aliexpress.ru/item/1005008518087267.html More information on my…
The mount is simple to print on its side without any supports. A ¼"-20 x ½" socket head cap screw is used to fix the speaker to the mount. There are counter sinks for the wall screws, sized for #6 drywall screws. A STEP file is included…
Contoured mount for Bosch 12 PSC31 and PSC41 drill, and impact driver units. Fit Ikea Skadis, including inside Vattenkar. Some support required.
This is an IPSC Standard Box, with the inner Dimensions of 226x151x46mm (so including the 1mm tolerance. For some reason the thumbnail is a bit smushed, that's just thingiverse. It is the correct dimension. I've had to fiddle around with…
Target Stand for USPSA/IPSC/PCSL/IDPA Target stand for 1in x 2in sticks and split in two pieces to fit on the X1/P1 build plate. If using outside, it is recommended to print in PETG. The two pieces are held together with two wedges…
Introducing the MPSCARA! UPDATE: This project is no longer being supported. A more-evolved version of this concept with a more active support team is available here . WARNING: This project is still a work in progress, we cannot promise…
This seatpost clamp is designed for 27.2 mm seatposts and M5 hardware, allowing you to mount anything you want to it. I'd suggest printing this in PETG, due to this material's flexibility. I used 4 walls and 100% infill, which still…
Glow in dark IPCS targets, great for indoor and outdoor practice. You can use them in dark or in standard condition even in rain and snow :') When placed on a wall at a distance of 2.5-3 meters, they will serve to simulate targets at…
Anchovy Testing out using an AI app instead of loading up Stable diffusion or using online upscaler. Verdict: Satisfied with Superimage.app. Seams show up, but that was predictable. Easy to fix. Speeds up my workflow and everything is…
A stand to show of you are proud of your Klipsch gear. Can be printed separate to do a color swap, parts can be CA glued but might not need it. I have included the files i used if you want to do a variantion on this. Be loud and proud! If…
Die Teleskopringe sind zweiteilig und gedacht für Teleskope mit 200mm Tubusdurchmesser. Für die Montage werden Nutensteine (vorzugsweise mit Feder) benötigt. Passen sollten alle Typen der Größe 20x12x5 oder kleiner und alle Gewinde M5…
These are 1/6th scale IPSC target models meant for use in your dryfiring training. Every model has within it several 6mmx2mm magnet pockets which allows you to easily configure your target to the presentation you want. The pockets are…
Shell holder for an option 1 initial load (9 shells) for IPSC competition matches. This stops the need to carry your starting shells in your actual caddy, and you don't ever lose count of the shells in the gun when starting your course of…
A relatively simple stand but works perfect for my PC desk setup. I printed using Prusament PETG Carbon Fiber it's an absolute great match with the overall look and feel of the speaker. I assembled everthing with countersunk m3 screws and…
Took the base scanner assembly and adapter tube from https://www.printables.com/model/237687-35mm-film-digital-mirrorless-scanner-holder and added an upper section sized for a 50mm Tominon Macro Lens with adapter tubes to connect to a…
Adjustable magazine carriers for USPSA/IPSC belt rigs. Mounting to a TekLok-compatible clip (consider the PipClip, also in my designs, for a printable option), they can be adjusted for camber and toe, to allow tuning of wrist and arm…
In this case I have reduced the keychain and it does not have the bottle opener functionality that @MatthiasW_1620678
Now V3!! 3.1 is a little shorter. 3.2 goes about as far down as the feet of the printer. both are much bigger than before! The pictures are of my prototype. The final version is a bit stronger and has my name on the front. Just because i…
We all know it: We do our weekly grocery shopping, forgot a shopping cart chip and do not have any suitable coins. This shopping cart chip is combined with a key fob so you always carry it with you (as long as you don't forget your keys…
fixed the lid by removing the Prusa label removed the middle part (it's unnecessary in my opinion) and somehow tried to remove the rings holding it in the bottom (it's not perfect, but it works) upscaled to fit Prusa mini plate warning -…
This capscrew knob is friction fit. This should work for print settings of 0.2-0.3mm layer height. Use several washers, an M5 nut (not acorn, just a regular nut) and a 8mm wrench as a jig shown in the photo to press-fit capscrew into the…
Enhance your audio experience with this custom-designed speaker stand tailored for the Klipsch KD-51M speakers, featuring a bottom dimension of 150mm x 230mm. Notably, it's also compatible with the Jamo S803 and other speakers with…
This is a model of the test fixture that is used by the US Consumer Product Safety Commission to determine if a product has small parts and is not suitable for children under 3 years old. Reference Figure 1 in 16 C.F.R. § 1501.416 C.F.R.…
Es handelt sich um einen Nachbau einer Kippschere mit der Kennung "48 A 59". Sie wurde abweichend vom Orginal um die letzte Einrastung eingekürzt. Die Kippschere verhindert allgemein, dass das Fenster beim Öffnen aus dem Rahmen fällt und…
Simple container for the Klipsch speaker remote that fits the honeycomb storage wall system.
This is a mount designed for the volume audio module for the Klipsh Promedia 2.1 speaker set. I wanted to mount my speakers on the wall but if they are mounted on the wall, the volume module ends up in the air… so I removed it from the…
Introducing the Cadillac dumpscalade! Is it real? Yes! very real and now you can have your own little Cadillac dumpscalade. I made this for fun. I didnt think up the idea but i figured it would be a fun thing to put together since its a…
Wanted to paint my own targets instead of buying some when I have cardboard laying around everywhere. I used IPSC / USPSA Targets measurements. Yes, there is only the A and C boxes. But, I figured if I am in the D boxes, I need more range…
The Mini-IPSC Target Template! Use shortened, sharpened nails in the holes to mark the vertices of each target zone (A zone, B zone, C, zone, etc) and trace the outside perimeter! Once finished and without letting the template move any,…
I created this cap to use a M8 socket head capscrew as a thumbscrew with the V-block and clamp by i606. I have plenty of M8 SHCS laying around so this seemed like a good way to put a couple of them to use.…
Klipsch ProMedia 2.1 Speaker Mount For Ikea Linnmon / Adils desk . -Print With Supports
DIY Home edition of Mostly Printed SCARA. Print instructions DIY Home edition of Mostly Printed SCARA. I was very happy with MPSCARA from Thingiverse - https://www.thingiverse.com/thing:2487048 . So during COVID19 I made my own solution.…
Analog zu meinen anderen Teleskopschellen eine Variante für Tubi mit 140mm Durchmesser. Außerdem zwei angepaßte Varianten für meinen Motorfokus, mit entsprechendem Absatz und Aussparung.
This IPSC target is a throphy we handed out for an IPSC competition match. I've used a spring from a clothes peg to make the plate springloaded, only the spring is a bit to strong for my liking, so I added holes in the base so you can…
This is an angled wall mount for the Klipsch R41M speakers (and possibly others) The angle is 34 degrees.
Designed this Bird House to be Easy to Print in just 2pcs, No Supports, Easy to Clean, has Blink Camera Mount. Fits on most printers 225 x 225, take about 7hrs and 250 g of filament. I printed in PLA, because my Great Grandchildren wanted…
This 3D-printed ClipScoop combines two everyday essentials in one smart tool: a 30 ml coffee scoop and a bag clip to keep your coffee fresh and sealed. Perfect for coffee lovers, baristas, or anyone who enjoys an organized kitchen. Simply…
post a pic when your done! 1、模型仅为皮肤mod，替换原版模型中的主要外型部件使用。要制作完成需要依赖原版模型文件。 2、需要在切片软件中拆分后再摆盘打印。 3、在原版模型的五金配件基础上需要替换或者新增的配件如下： 更换：3.0直径圆柱销长度32mm*1 更换：M5外径6长度35mm对锁螺丝*1套 更换：m3沉头螺丝，长度16mm*4颗 新增：m1机瞄光纤，7mm*1根，47mm*2根…
Festool PSC Circle Marker – Simply Cut Out Circles! Print your own Festool PSC Circle Marker for precise contours with your jigsaw PSC/PSBC 420 or PSC/PSBC 500. Don't have a jigsaw yet? Click here Festool Filament* Festool Green: Festool…
Jung A590 Rocker Switch (Wippschalter) Printer: Bambulab X1 Carbon Nozzle: 0.4 Filament: Bambulab ABS Layer Height: 0.16 Wall Loops: 2 Infill Density: 40% No support or brim needed Have fun
Cześć Festool-maniacy! Tym razem udostępniam Wam etykiety dla wyrzynarek marki Festool! Do wyboru macie etykiety dla skrzynek drugiej lub trzeciej generacji. Zalecam drukować w PETG/ABS ponieważ PLA w rozgrzanym samochodzie może się…
Klipsch ProMedia 2.1 Speaker Wall Mount. Small profile, single screw mounting option. It has a little nub that digs in to the drywall to prevent rotation. Print in the orientation shown on the photo. No supports needed.
Updated 2017feb07: v1.0.1 fixes some calcs that prevented increasing mount tab beefiness, plus beefed it up from 3mm to 4.3mm just to be sure (plastic is cheap !). v1.0.0 models are still there for comparison but suggest to just go for…
Nachbau der Kippschere für ein Fenster im Untergeschossen
GBS 8200 RGB to VGA Converter/Upscaller Box. Two holes at the back: one to allow for an alternate power cord (I use a USB power source) and adding the possibility of mounting a micro USB connector PCB; second hole for an input cable (I…
little gnome with hat, pants, nose, beard and eyes
This is an upscaled BRICK-style leaf that I resized to fit my giant BRICK wreath project. It prints as a single piece and pops right onto oversized studs for fun seasonal decorating. I designed this to swap out different accessories…
3D files included here at Prusa Printers: All parts to make your own popSCOPE. 26x 3D printable QR-code microscope slides which are used to simulate real microscope slides 18x puzzle piece files (glued together to form 9 puzzle pieces in…
I needed to find a way to suspend my Klipsch R52C center channel speaker from my fireplace mantle. The speaker was too tall to simply set on top.. so this was my quick solution. Built in Autodesk Fusion360. The original CAD file is…
My 5-year-old Klipsch speaker woofer trim ring was disintegrating I emailed the local distributor for Klipsch, and they ghosted me. So decided to design this my own to replace that. To install per speaker Print 1 trim ring Print 12 dowel.…
This is a dispenser designed for 2000 piece 20mm patch rolls made by Eemann Tech. Clearance of 0,2mm for all parts except the locking surfaces which have 0mm tolerance. Would recommend using PETG or ABS/ASA for locking tab durability over…
Patch dispenser for roll of patches commonly used in Czech republic as well as parts of Slovakia and Poland (and perhaps other regions) Rolls are about 93mm outer diameter and 39mm inner diameter. 19mm in patches diameter. The lid is…
Die Teleskopringe sind zweiteilig und gedacht für Schüler- oder andere Teleskope mit 118-120mm Tubusdurchmesser. Für die Montage werden Nutensteine (vorzugsweise mit Feder) benötigt. Passen sollten alle Typen der Größe 20x12x5 oder…
When doing dry fire practice, you need something to aim at. This simulates a full size plate at a distance for use in training environments with limited space. Best printed in dark gray to simulate real plates, or red for no-shoots. Print…
Klipsch ProMedia 2.1 Under-Desk Volume Mount Remix, smaller than the OG
This is a model of an insert holder with insert, screw and a torx key. Back then when i designed it (like 5 years ago) i took some liberty and didnt hold 100% to the norm but it is something like a “DIN 4968 VDUH 48 14 45 F”. Why I did…
This is a mounting plate that allows for a replacement PSU to fit in the original PCB location. The original power supply was much larger than an aftermarket PSU. This part is designed for the Noyito AC-DC PSU as discussed on the Klipsch…
Kippschutz für Blumenkasten auf 8x6 Doppelstabmattenzaun Halter Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Infill: 100% Filament: Custom PETG Notes: PETG Post-Printing ============= Kippschutz für…
@Rams_37529 created a model for the Festool PSBC 420 EB but I couldent use it on my PSC 420 EB. So i made some Accessories. The Clip is made for Festool saws which cant us the Battery to lock the adapter. Everxthing is made out of PETG…
basement window Stop bar… Holder.
Klipsch promedia 2.1 speaker mount for this system. Need x2 M5x6x7 heated inserts Used the larger mounting system with 2 holes holder 2 hex - d30 please leave ⭐ review and rate. Buy me a some raman if i helped you out in anyway.…
Für unser 3D-Druck-Setup brauchten wir eine abschaltbare Steckdosenleiste, für die Montage im Schrank. Die Steckdosenleiste hatten wir schon, also fehlte nur noch der Schalter. Wie es sich im 3D-Druck-Hobby gehört: schnell was…
