Counting matching models…
Update 10.02.2023: I remixed the rotor with the toroidal design :) Feel free to test ist out! https://www.printables.com/model/394700-toroidal-rotor-4-strong-flying-propeller In addition, there are now many other great remixed propellers…
News 2024-04-10: Please also check out my new Blade Dispenser for this Bed Scraper: This is the XL version of my popular Optimized Bed Scraper with quick-change blades. The cutting edge of the blade is 45 mm, a full 30% longer! Each blade…
Material: PLA Infill: 10-15% (honeycomb for me) Perimeters: 4-5 No layers top and bottom NOTE ********************* 29/09/2025 Its new companion Cell Stand , made in the same style, will be the new cell phone holder on your desk. For…
Working from home often results in beverages and computer equipment sharing the same desk. This is a perpetually hazardous arrangement (and I speak from experience). This design is for a cup/drink holder that places the beverage below…
The siphons are printed separately and then simply pushed into place. I did it this way to avoid using supports. Water level indicator The floating water level indicator is a bit tricky. Print the indicator (1 perimeter, no infill),…
I did not make this model, but decided to upload it here so it is preserved. Just in case it gets deleted from official site ( https://projecthailmary.com/ ). 3D Model Print Instructions: Grace Sculpture Keychain This model includes two…
Like this design? Check out the Pocket Copter! Fast to print and assemble. No screws or glue needed. Prints without Support Structures: https://www.printables.com/model/421807 Pull Copter Finger Ring Projectvideo:…
New options: Split versions for small printers and new mid part to improve stability when collapsed (see updates below) Also modern laptops and notebooks get quite hot if standing flat on the desk and the vents have to work harder than…
This fully functional Cryptex has an easily changeable code and is modeled after the Cryptex described in the novel 'The Da Vinci Code' by Dan Brown. (Thank you Prusa team for this wonderful video of the Cryptex) Design I made this…
Do you have the following printer errors when printing with the AMS? Failed to pull out the filament from the extruder Failed to feed the filament into the toolhead Well, give this little mod a try! In my case, I found the most common…
Collapsible Basket Optimized for 3D printing This basket prints in place as one part and doesn’t require any supports. It prints flat but folds it into a basket! This is a remix of the first collapsing basket I designed, that version uses…
Compatibility: This case design is compatible with Raspberry Pi's 2B/3B/3B+/4. It may be compatible with other models, however, these were the ones I was personally able to test it on. Two Top Depths: (01/06/2022) The top half is now…
These are lego compatible bricks. The models here are only a selection for convenience. All x*y sizes can be configured on the Perfect Printable Bricks website . If these don't fit quite right with your legos you can fix that with the…
Hose adapters for all common (at least what I could find online) hose sizes. All adapters have: Each size has an option of Outer Diameter measurement or Inner Diameter. Outer Diameter (OD): Intended for the printed tube to go inside your…
These boxes are specially designed to be printed really fast and also to have as many holes as possible to let the wet air reach the silica-gel inside. The screw cap is an easy and durable way to close the box and also open it again to…
News 2024-04-04: Upon request, I designed an XL version of this scraper with 30% longer blades: News 2024-03-10: Please also check out my new Blade Dispenser for this Bed Scraper: Optimized Bed scraper with replaceable blades Since the…
The Polymaker spool adapter is designed to help your cardboard spools print more consistently by reducing friction and creating a structured rolling surface. The spool adapter clips around the face of the Polymaker cardboard spool and is…
Simple button to make removing the PTFE tube from the AMS buffer a little easier. There are 2 versions. One is a permanent install, and the other slips over the tube so it can be removed.
Edit, 23. 7. 2026: Updated the MOST 1:100 version and cover image. Added MOST 1:100 description. MOST 1:100 explained MOST stands for Magnetic Open Source Toys. 1:100 is the scale. These are the rules: 1 real meter = 1 toy cm Use ∅ 5mm ×…
👇 Click the image below to explore my other 3D printable models. ✨ I prefer print with PETG filament. Z mount connection Z mount slepení Glue the two parts of the Z mount. The top edge must be lined up. Alternatively, you can sand it. To…
Strong shelf brackets designed to hold a 300mm deep shelf board! These were made with Fusion 360's topology optimization feature for the unique look, but they're definitely not too shabby in the strength department, either. Each one holds…
Inspired by https://www.prusaprinters.org/prints/63523-laptop-stand I created this stand that raises the laptop a bit higher. It is compatible with Prusa Mini and I printed it with Prusament PLA Galaxy Silver with 0.2 layerheight, no top…
Update 1: Added a version with a longer front lip that fits better if your monitor has curved or thick bezels and fixed the weird slicing bug that added strange lines on top of the model. Update 2: I now recommend printing the…
Check out my profile for the laptop stand V2 with a larger angle. connect version Drill version
Normal 3d-printed brackets can easily break if you overtighten the screws. These brackets are specially designed for FDM-3D-printing. Because of their wide surface areas on every layer they can withstand multiple times more force than…
This is an stand for an latop iPad and an e-book with al hexagonal pattern. There is also a solid version if you prefer a cleaner look. If you want to modify it to fit perfectly on your devices follow these steps. Measure the width of…
V2- PTFE bowden tube guide and CANBUS wire support **** 7NOV24 -Removed a zip tie hole on the long arm's that was a weak point **** I've made some adjustment after some feedback from the community. Changes made over V1: Added a option to…
A flexible velociraptor! How cool! This is a very flexible (with 19 joints!), print-in-place model I spent a long time designing. A lot of attention to detail is in this model, and a few of the smaller tail links are weak due to their…
Quick Setup Drill Depth Guide I did not use drill depth guide before and sometime I regretted it. Now there is no excuse, as I always have them with my drill bits. Design Features: Quick to setup. Just set the distance between the stopper…
UPDATES: 12/2021 "A" parts for small servo "B" parts for big servo 03/2024 Improvements on the following parts: Body L and R, Case Holders, Gear 1 and Rear Frame R. 05/2024 improved design, ready to print plates, new parts and updated…
We are thrilled to announce the release of our successor to KLAMMA, the culmination of countless hours of design work and dedication. This new version represents a significant milestone in our journey, building on the strong foundation…
Fully parametric folding laptop stand designed from scratch in Shapr3D. Set your display size and the model updates automatically; a thickness variable lets you tune looks and material use. Adjustable height via angled notches with a…
Low Poly Bunny Sculpture – Minimalist Cute Rabbit Decor 🐰 UPDATE: I've uploaded version 2 model with more polished low poly model. You may download model files with a postfix 'v2' p.s. Thanks to those came critizing me whether I'm using…
UPDATE 25.2.2022: check out my lego duplo BRIDGE ! https://www.prusaprinters.org/prints/137837-set-lego-duplo-train-bridges-optimized UPDATE 11.2.2022: added 0.3mm layer height gcode files for all tracks → faster prints , still looking…
IMPORTANT: PrusaSlicer thinks some of these keycaps used inches. This is incorrect. Tell it “no” if it asks about that (but say “yes” to multi-material). I included screenshots of the correct responses to these pop-up dialogs if you look…
A grumpy gargoyle that prints without supports! https://youtu.be/23MjyorK3xk Printing Can be printed in both FDM and resin No supports required Requires minimal infill All Sculptember Models Ghost Mummy Frankenstein Werewolf Dracula…
Projectvideo: https://youtube.com/shorts/1tkvioQbD9o v2: https://youtube.com/shorts/hchjgssc5oo The Pocket Copter is easy and fast to print and assemble and flies great! Requires no extra hardware or glue and prints without support…
More durable than it looks. No support required.
Build plate corner guides for the Elegoo Neptune 4 and 4 Pro printers. It accounts for the margins needed to give clearance to the underside of the heatbed You can stick it with double sided type, I used VHB. Printed in PETG for more…
Update 03.01.2022: version v3 is available. The bend radius has been changed to roughly 40mm to address the binding issue, which could create problems when loading stiff/rough filaments. Update 29.12.2022: added new version…
This is a transferred project from Thinigverse - creator: MakePrintable Link: https://www.thingiverse.com/thing:1541512 Original Description: Sometimes, the little things mean the most. We've designed a creative idea to inspire Mom's…
A print-in-place figure of Optimus Primal from Transformers: Rise of the Beasts. Created by Nikko Mendoza.
This Project is Outdated! For the latest Revisions check out: Stackable Storage Boxes – 2024 Update The following description is no longer updated: Discover my specially designed storage boxes, meticulously optimized for 3D printing.…
____________________________________________________________________________________________ 🇬🇧English🇬🇧 ((In 🇫🇷Français 🇫🇷 at the bottom of the page )…
EDIT: I have added 2 more variants of the kit (looped and un-looped) with the main fuselage flipped round the right way. Should remedy any confusion, but keep in mind the very thin footprint at the rear! The F22 Raptor is a 5th generation…
This adapter allows you to use Meta Quest 2 head straps on the Quest 3. Instructions: Download under ‘model files’ and print with supports. Enjoy Haydn Bao Design notes: From v4 to v5, the geometry updates are minor. There's just a few…
This is adapter that relocates the PSU power switch on PRUSA CORE One (and CORE One +) to more accessible location. I'm happy with how the adapter works and if you also have trouble reaching the back of the printer, I'd be happy for you…
This adapter system wraps the edges of an ESUN 1kg 199x62mm cardboard spool in order to: provide smooth rotation within a Bambu Lab AMS prevent carboard debris from depositing within a Bambu Lab AMS Features: Reusable ESUN nameplate for…
Labubu Mini - This model is shrunken down to 2/3rds of the original size. Plus I added the option for a keychain. The body can be printed without any supports. I did add a brim to make sure it doesn't tip while printing. Options include…
UPDATE!: I have revised the original Overture Spool Adapter based on feedback and experience after creating my Polymaker Spool Adapter. Version 2 of the spool adapter works just like the original except, I have added the small retention…
UPDATE : I had issues printing the honeycomb when the two pieces were not aligned 100% the same. Caused an issue when I inserted the 1/8" rods (not being perpendicular) So, I added three 1/8" holes that would always print the same place,…
Update (5/3/23): I would now recommend that people consider trying the ShortStack Remix linked in the 4/17/23 update directly below if it meets your needs. Its been used for a few weeks with decent success, and seems mostly equivalent to…
I seen the contest: last meters to make good use of the last meters you have. So i thought lets do something. im not a designer, but i wanted to make something to minimize plastic waste and make something useful. i made some small cable…
Designer HORSE Sculpture Printed with fuzzy skin effect. Fuzzy Skin: Contour Fuzzy Skin Point Distance: 0.15 Fuzzy Skin thickness: 0.15 If you're interested in the commercial use of my models, check the link to my Patreon…
This is the well known Temptower from Tronnic as .3mf to load into PrusaSlicer as well as sliced and ready for the Prusa Mini. Just print the gcode. All gcodes were created with PrusaSlicer 2.2.0 using -) PrinterSetting: "Prusa Mini"…
Want to reuse toys you already have in a new way. Why not challenge your fantasy by making gigantic bridges and ramps with wooden trains (like Brio or IKEA) with help of simple Duplo bricks. These adapters will make this happen! I got…
Please leave a like if you enjoyed the model or it helped you. :) Remixed from : https://www.thingiverse.com/thing:4715615 Started off by making it a bit easier to print by adding a slopes to some of the overhangs. Then ended up taking…
SIM Adapter Kit Card Simple set of SIM adapters in kit card form. Nano to mini Nano to micro Micro to mini Prints quickly, with no support. Snap out the one you need. Print at 0.16mm (0.2mm initial layer height) for best results. Take…
A replacement filament spool holder for serveral Elegoo Neptune FDM 3D-printers. If you want a second spool holder, your spool holder broke or your spool is to small to fit on the original one. Supported Printers Elegoo Neptune 3 Pro…
Vertical laptop stand with different options for an inner gap to fit variable thickness. The model is printed in 4 parts to avoid supports and to have nicer surfaces: 2 sides and 2 bottom brackets to hold everything together. Assembly…
This coupler allows you to join two ends of PTFE tubing together with magnets! This will be useful if you want to have an airtight connection between two PTFE tubes but still want to be able to pull/push the filament inside sometimes. I'm…
A great deal of care must go into a design before there’s nothing left to optimize. I think we can all agree that Zack Friedman’s Gridfinity system has become a benchmark for organizational systems across sharing platforms. However, every…
The Velociraptor Head is a little more complex to print than many of my other animal heads because the teeth require support. You will probably also want support for the back of the jaw, but this model printed fine for me without support…
📝 Description 🔒 This model is protected by copyright If you want to sell physical prints, check the subscription here: 👉 https://www.patreon.com/cw/Nieuchronny Cute mini velociraptor 🦖✨ Part of my mini figurine series – small, detailed,…
This is an OpenSCAD module library for propellers and spinners. See this excellent video by Bruno Antunes on how to integrate this library into Fusion 360. This design models elliptical propeller blades that transition smoothly through…
Soda can opener with option to use as lid for bee and other Insects, will also reduce spillage if tip over. How to use it: Open soda can Insert the soda can tap into hole in front Pull up to open the soda can Push it down to lock it on…
PTFE Guide for K1 extruder No supports needed. Improves filament guidance to the extruder Other mods for Creality K1 You can buy me a coffee with a donation. Me puedes invitar a un café haciendo una donación Click to danate
Celebrate the essence of Christmas with this beautifully stylized Holy Family sculpture. Featuring smooth, flowing shapes and a modern artistic design, it captures Mary, Joseph, and baby Jesus in a serene, graceful embrace beneath the…
This model was featured on The 3D Printing Nerd We love the Star Wars Kit Cards by benzz88 Edabot Nakozen and delman83 After designing the millennium falcon kit card, I thought I would try to design a tie interceptor to go with the other…
Adapter folded from two parts to limit the use of supports DeWalt battery adapter You will need: 5x M3 - 15mm screws 2x male connectors and wires
Updates Have a look at the new slim version! Description This is a set of snap-in spool adapters designed for the OpenPrintTag . Some filament brands have oversized inner spool diameters, which makes the OpenPrintTag unable to stick in…
It does make noise, you cover the right hole on the chamber and you blow.
vert vertical laptop stand designed with the 14 inch Macbook Pro, but you can adjust the gap size to meet your demands by scaling only the Y axis it has cutouts on the bottom for 10mm rubber feet update · i've now published separately…
Prusa released the printable parts for MK3s+ and the fan shroud is much better than the stock one of the Mk3s, so, for everyone who don't want to fully upgrade from Mk3s to Mk3s+ but still would like better cooling, I cut the second…
This is my WIP third generation tri-loop or tri-blade design which improves upon the second by following more traditional rules of propeller blade design whilst also reducing weight at the outer edge, (hopefully) improving prop response.…
Simple tool for lubricating LM8UU bearings. Print instructions New version! We found a few things we could improve, so we did, as we always do :-) Screw the printed tool on the Prusa Lubricant tube, carefully put the bearing on and turn…
Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! Tip is thinner, handle with care! Keep your charging ports spotless with the Port Cleaning Tool V2! This optimized version is specifically designed for…
The frame rate doesn't do it justice, but it does indeed spin like a helicopter! Maple trees are a diverse group, boasting around 132 unique species. These trees produce seeds, commonly referred to as double samaras, which come in a range…
I split this design into two cards, A & B, so it be printed with smaller build plates. No AMS/MMU is needed since it is a single-color print. The overall size of the velociraptor is about 145mm tall once assembled. Each piece is about…
Update V2: I completely rebuilt the Duplo connector. I changed three things of the original "Minimalist Duplo - Brio, IKEA, Wooden Train adapter" with Tinkercad in order to fit my needs: I reduced the inside height of the Duplo connector…
https://www.buymeacoffee.com/augustas This portable and compact laptop stand is the ideal solution for elevating your laptop to a comfortable viewing angle while on the go. It is made of durable plastic and can be easily folded and stored…
Don't forget to hit the like button if this helps you :) A perfect calibration square print has alluded me since I got my Ender3S1. Sure I have lots of prints that work but most of them are smaller and around the center of the plate. If I…
Cat, Hexa Sculpture ------------------------ 6.3.2026 : update to way better v2
Made this to be able to put the bed back in place more easy and add a cable chain on my neptune 4 plus Thanks to: scrogathon & Matt Queen & Sascha and Berry C & Daan87423 They Helped me a lot for making the mount possible on the neptune 4…
How to setup the profile: Go to File → Import → Import Config Bundle and select the .ini file. Download this program and go to Print Settings → Output options and replace “thumbnail-path-here” with the path of the program you downloaded…
Kleine Spulen passen nicht ins AMS. Bambu Lab gibt eine geeignete Spulenbreite von 50-68mm und einen Durchmesser von etwa 200mm an. Kleinere Spulen wie etwa die 250g magicPLA von 3DJake können mit dieser Adapterspule und den passenden…
Print-In-Place Folding/Expanding Laptop Stand that holds my 14" Dell Latitude 4500 Laptop at 45 degrees with zero issues. All interlocking parts are designed with 0.5mm gaps. Print instructions 0.4mm nozzle 0.2mm layer height 20% Infill 3…
Flickopter The simplest flying toy you'll print this year. Don't let its size fool you—this tiny helicopter is surprisingly addictive. Just one flick and you'll immediately want another try. Challenge your friends, compete for height or…
3D Printable Screw Generator for Fusion 360 This is a fully editable Fusion 360 file designed to generate screws specifically optimized for 3D printing. Most standard metric threads are designed for metal manufacturing, not for FDM…
I updated my popular 10" rack mount for Lenovo ThinkCentre Tiny. It adds up to two standard keystone jack sockets, so you can bring Ethernet/USB/HDMI (or whatever keystone you like) to the front of your rack. I made some additional…
On the new ELEGOO Centauri Carbon's the PTFE tube running into the print head is way too kinked and causes loading and printing issues. If you have one of these machines please snip the small zip tie at the end of the tube guide and…
Overview My adaptation of cryptic calendar for 3d print. Original project you can find on on youtube. Instruction Monolith has two version. First version of calendar (yellow one on photos) are colored from bottom so you can get additional…
Laptop stand with cables holes. In slicer remove top and bottom layer and add infill as wanted. I used honeycomb. For link I recomend use at least 45% infill. I use more than 2 perimeters to make it stronger. Material: PLA, ABS, PET-G,…
if you like this kind of stuff consider supporting me on my Patreon www.patreon.com/wekster
Hollow HORSE Sculpture Printed with fuzzy skin effect. Fuzzy Skin: All Walls Fuzzy Skin Point Distance: 0.15 Fuzzy Skin thickness: 0.15 If you're interested in the commercial use of my models, check the link to my Patreon…
Hi there! Welcome to my most complex model so far! Do you hate models that are a nightmare to print? Because I do! Easily printable models is an attribute that I want my name to stand for! I designed this engine model from scratch and…
Keep your tires safe and legal with this compact Tire Tread Depth Gauge ! This tool helps you instantly measure tread depth to see if your tires still meet the legal minimums: Winter tires : 4 mm reference Summer tires : 1.6 mm reference…
Demogorgon (Stranger Things) - Relief Sculpture Infill: 5% gyroid Supports: NO Layer: 0.12 Feel free to download it too Vecna (Stranger Things) - Relief Sculpture…
Minimalist Duplo - Brio, IKEA, Wooden Train adapter that you can use for connecting Duplo bricks with wooden train tracks to make bridges and slopes. The peg on the outside is modified a bit so it fits on a Duplo brick too. Print with…
Have you ever had a pain in your neck or back after a working day spent in front of a laptop? I had… Two pieces of plastic made my workplace much more comfortable and convenient. And Mr Neck is happy now. Try and let me know your…
