Counting matching models…
The CAD file for the following motor: https://www.qsmotor.com/product/10inch-3000w-hub-motor/ 10inch 3000W Hub Motor 1) Motor Type: DC Brushless Hub Motor 2) Version: V2, V3 3) Rated Power: 3000W (maximum 6000W). 4) Voltage Range: 48V,…
QSMPÖH Quick Swap Miniature Painting Ö Holder for standard soda bottle caps Ideal for batch painting. Love the model by (needs reference) but I liked better the idea of up-cycling soda bottle caps, so I re-draw the handle and design a…
The purpose is to make connecting drybox as easy as possible. 0.2 and 0.3 layer heights were also OK. Drybox i'm trying to connect: https://www.printables.com/pl/model/98008-drybox-for-4-spools-ikea-samla-22l-based Other similar part:…
About: The Festo fitting is screwed into a threaded insert. This model uses M5 inserts from Ruthex (other inserts are also possible). The core hole diameter is 6.4mm and the depth of the hole is 9.5 mm. If you need a different core hole,…
I used 0.4 Nozzle, 0.2mm Layer Height, 4 Perimeters, Solid infill, . Printed fine without any supports on MK4 (when parts oriented flat on). I used Prusament PETG-CF. Other items needed: 3x Festo QSM M5-4 (2 for socket: A+B and 1 to…
this is Pepito he is gangster and an minecraft egg
Big funnel on the inside to help with loading of the filament. Modeled for a M5 Festo fitting instead of the M10's Zcubed and Regis use for the PTFE..
empanada is a egg from the qsmp and an cute lil egg
Would recommend a 0.15 layer height and PETG. Tightening the QSM M5 4 requires a bit of force to dig into the thread. Use the wrench from the MK4 kit to tighten. Update 2023-08-10: Added a version 2 with wider profile for stiffness, and…
Compatible with Prusa MK3. This part is designed to fit the standard brass insert that comes with the Enclosure Kit , which unfortunately does not fit the MK3 out of the box. Therefore you'll need to harvest the insert from the original…
To prevent the filament from absorbing moisture and degrading, such as ABS, ASA or water-soluble filaments, it should always be kept dry To ensure that the filament remains dry during printing, it is recommended to print directly from the…
Changed Double M6 to double M5 Thread
I would recommend printing it with supports. I printed it with 15% Infill and snug support.
I made an remix for the mmu Buffer
this remix of the front part allow to screw a QSM-M5-6 fitting and a piece of PTFE on the opposite side to reduce friction when the spool is almost empty and the filament string enters angled (so the filament do not rub on the edge of the…
KmanSweden made a super simple filament passthrough for the Repbox, i tweak this design slightly to allow for dual fittings on both sides of the model for other passthrough needs. I also provide a style similar to the original, as well as…
