Counting matching models…
Dont forget to post your makes! I use the following settings to print this model with a hole for hanging: Orientation: Top Brim: 5mm Mode: Vase Bottom layers: Enough to get two layers into the spiral, about 40 for 0.3mm or 60 for 0.2mm…
This 20 x 20 x 20 mm calibration cube will help you with printer tuning. I also added an upwart pointing arrow and a 3DBenchy-style first-layer-squashing test on the bottom of the print. Printing Recommendations: 0.2 mm layer hight, no…
Designed with the support and contributions of the “Recreator 3D” Discord community. This design uses a router bit as the main cuter. Has support bearings on both ends of the cutter for added support and tool longevity. Uses a small cheap…
This model was uploaded on makerworld but did not work with prusaslicer very well. I painstakingly repainted it for 2 color mmu printing on my Prusa XL. Enjoy
"Articulated Crystal Dragon by Saber3D" had a few versions, namely the original and an "Updated" set of models that has better/thicker connecting rings. The "Updated" models would not load in PrusaSlicer with the correct multi-material…
STOP!!! If you don't choose to participate in what is considered a BETA print. Follow this link to known working files. https://www.printables.com/model/179820-the-recreator-3d-mk5kit-ender3-diy-3d-printer-fila BELOW …is the BETA Step…
This remix is based on the elegant Filament Rack originally designed by BTR3D . Big thanks to the original author for the simple and practical idea. Modifications I made: Replaced the 15 mm aluminum tube with a 3D-printed cylinder (up to…
This is a case for TS100 soldering iron. It is made by JamesK1. Link to original .
Original design here: https://www.thingiverse.com/thing:6186432 I really like the design and idea from dalia5. I remixed theirs. Some items in this remix: - Increased tolerances - reinforced cutters - guides 'snap' into place - penny…
I was really looking for a good fan duct for the Bondtech BMG setup on my CR-3D C1. https://www.cr-3d.de/unsere-produkte/c-serie/ But obviously this fanduct will fit on any setup with an E3D V6 and Bondtech BMG Extruder (Volcano Version…
MELD: A Filament Joiner September, 2022 After working with Mosaic’s Palette 2 Pro, I wanted to find a cheaper off the shelf method for filament joining that didn’t cost $500. Sticking to Recreator3D’s mission; I started work on, MELD: A…
Have you ever looked for a Drybox to print directly out of it while it stands on the top of your printer? Even with the QIDI printers, where you have struts on the backside, it is now possible to print directly out of the storage box. you…
I really struggled to get the original design with bearings working reliably, so I did this remix using 18mm snap blades, which I have hundreds of. The blade will cut about 10 bottles before you need to snap that section and go to the…
I have already used cardboard spools but this is only if I have to print 1 color. Ordered this brand because I needed this exact color for a multicolor print. Spools of R3D are Ø195 so this already didn't fit. (I made the outside diameter…
The Official Recreator3D Mascot... Captain Recreator! Created by the Amazing, Wekster! https://www.patreon.com/wekster https://www.thingiverse.com/wekster/designs FACEBOOK: http://facebook.com/groups/recreator3D DISCORD:…
Let us know how you go! Print the inner cover in TPU/TPE as the airtag is a tight fit and will not work with other materials. You can then print the outer cover in any hard plastic of your choosing/colour and slide it in, put on the ring…
If you find my work useful you can: paypal.me: https://www.paypal.com/paypalme/printyourfix Visit my website for contact form: https://printyourfix.com/ Follow me on Instagram: https://www.instagram.com/printyourfix/ Visit YT channel:…
This model widens one side of the spool ring adapter to stabilize a R3D 1kg 194x58mm cardboard spool while it rotates within a Bambu Lab AMS. Features: Reusable R3D nameplate for easy identification when reusing Instructions: Print one of…
The Recreator3D.com Community Bottle Dryer Prints on a 200x200 Bed Uses a 40MM Fan for Air Circulation To Power the Fan, Use a 5 Volt Fan and Wire it into a 5 Volt Power Cord for a Phone Charger or equivalent. Just make sure to use a…
The Matter3d spools are a bit smaller than all the other variations I've seen. I resized the original fusion file in Blizzards model to “197mm” diameter and it fits like a glove. Update March 24 2023 : I received a spool that was too…
An organizer made for some of your typical 3D printed tools and more. Even has a place for your calipers!!!
The Recreator3D.com Community Bottle Dryer V2 is made for smaller build volumes . No longer limited to size! Very interchangeable and easy to alter for your varying bottle sizes . Easy to put together. Some strong glue is suggested to…
The Recreator3D.com - Mini Spooler, Holder and Enclosure.
Cartographer3D Mount for Qidi Plus 4 ⚠This was a fun proof of concept to get Cartographer working on the Plus 4, but Stew's Beacon mount will serve you much better, please use that instead.⚠ I am leaving this page up as a resource to the…
RatRig V-Core3 without enclosure: Led mount Dayspring RatRig VCore 3 LED by Vector3d da Jake90 | Scarica il modello STL gratuito | Printables.com BOM: 2x sup_led_enc (1).stl 2x sup_led_enc (2).stl 4x cap head screw M6x12 4x Tnut m6 3030…
Technology Outlet is a 3D retailer based in the UK. I purchase their Copymaster3D filament, which I believe to be of reasonable quality and priced accordingly. They are now using cardboard spools, which they said would work fine in the…
ENGLISH: Modification of the filament guiding system: - Modification of the system bar by a plain steel bar of 8mm instead of 10mm. - Modification of the support feet of the bar, 8mm hole instead of 10mm - Modification of the guide to…
Just slightly modified the remixed source.. added friction clasps and remove the pins on the top lid as I found it causing a fitting problem. FYI. The one I printed has one clasp in the center versus the updated model has 2 clasps. No…
I designed this shroud for the Prusa XL to decrease PETG stringing in multicolor prints, so please give it a try and let me know how it goes. This is printable with .6 or .4 nozzle, using the orientation in the pictures, which should be…
My buddy @JS-Studio made me this awesome model for my birthday! SuperBart or Super3DPrintman is now available for you to print and I can't thank Jan enough for this one. The face looks incredibly lifelike and that body also looks.... LOL.…
ENGLISH: Setting up a bearing system on the large wheel : Materials required: 2x 608ZZ bearings 1x threaded rod 8mm diameter, 152mm long This system is added to the original system, avoids waste. 1. Print the bearing holder part in 2…
This model adjusts a few parameters specifically for Matter3D cardboard spools (non-corrugated). The main differences are Inclusion of four reinforcement areas that correspond to where the cardboard spools are often warped Sized for…
ENGLISH: Changes in ventilation: - Change of fan for a 40x40x10 Silencer (12v) - Addition of a LM2596 step-down device (model below). - Housing for LM2596 hooked on the side of the aluminum profile FRANCAIS: Modifications de la…
Made to facilitate mounting the lead screw without needing some sort of adapter. Having an early ender 3, the lead screw nut does not feature 4 mounting holes. Therefore, I remixed HumbleDeer's SETP file to accomodate this nut. The…
So a while back I decided to dive into learning to sculpt in Blender and decided I would make some basic six point of articulation action figures in the process. My patrons have had exclusive access for a while but thought it was time to…
drill bit has an 8mm “insert” since the torque is relevant, use a 3d infill (recommended gyroid 40%) and 4-5 perimeters, PETG or ASA/ABS are recommended.
I encountered difficulty attaching the original design due to the fastener being positioned beneath the tensioning rod. The use of hex wrenches with a ball end could facilitate this process, but my current set only has flat ends. The…
This is a resized license plate holder to fit EU-size rear license plates for the 3DSets Landy
The switch wires are shorter on the E3V2 so I modified the original housing to comfortably work, as long as you use the switch adapter that I also remixed.
Support Dayspring RatRig LED by Vector3d BOM: 4x cap head screw M6x12 4x Tnut m6 3030 4x heatinsert M3 4x M3x6/8 you can buy it here: Dayspring RatRig LED - Vector 3D Download: led.cfg klipperscreen.conf printer.cfg…
These are the XY Joiners made by Vector3D https://github.com/AdamV3D/V-Core-3-Vector3DEdition/tree/main/Printer combined with the clamping mod of MFBS. https://www.thingiverse.com/thing:4947482 I changed the hole size back to 5mm and…
Modified "Bottle Cutter - Top - 8mm" part to fit 5 Forint (HUF) coins. 21,4mm
Bracket for 3030 profiles to mount the Daylight/Daybreak lighting at a 45 degree angle. M6 12mm screw for profile mounting with T-nut. M3 Heatinsert for mounting the lighting - length almost does not matter. Mine had a length of 5mm and a…
Plate with ducting to allow the use of 40x40x10mm fans (like the Noctua ones in the photo) for a quieter experience. The step file is available if you wish to edit it for tolerances or to use heatset inserts, for example. By default, the…
Target If you don't want to mess with the backside PTFE tube gasket, use this minimalistic lid raiser to route the Cartograpers3D USB cable to the external USB port. For all others who are looking for a lid raiser to stop the PTFE tube…
DISCLAIMER: YOU ARE GONNA NEED TO CUT A SMALL PIECE OF THE ORIGINAL SHROUD OTHERWISE THIS WON'T FIT OR USE ANOTHER SHROUD DESIGN [ 955271-sv08-toolhead-cover ] Give this a read before you start and follow it to calibrate the probe […
This is Mover3D. A 3D printed, moving light, using the industry standard DMX-512 communication protocol for lighting control. Thus, it can plug in to any standard lighting control console, creating the ultimate lighting desk toy. Mover3D…
I created a Shapr3d file of a thread. You can easily modify and adjust the model using variables. If something doesn't work, I'm happy to help.
Based on https://www.thingiverse.com/thing:3369418 Made for XCR3D Titan extruder version (which is cheap "optimized" clone version) Very light and simple design to make it perfectly align with hotend To be used with Pancake motors up to…
-improvement The plastic gear is now not in contact with the motor rod. (this prevents the gear from being blasted by friction and heat.) It now use an aluminium coupler to make the link between the motor rod and the 3D printed gear.…
Here you have our extruder indicator, enjoy ^^ “R” Stl is for print with multicolor (3colors) “Front cover” Stl is for print with multicolor (2colors) designed for use with 8mm magnets Telegram Ryper3Ddesing group (spanish group):…
press-fit 10 cents SGD coins to use this PET plastic Bottle Cutter with the Recreator3D. 6mm size strips
This remix has the model entirely redrawn as a solid body. The model present in the MK5KIT r2 assembly is a converted mesh file, and not a true solid body. This version is a solid model recreated as faithfully as possible with a few…
This is a remix of Vector3d's VLMP soldering iron holder. I found the basic holder kept pushing the soldering iron out of the holder when I applied downward pressure. This adds adjustable screws to increase the tension. You will need the…
I really liked the model by Jevermeister , but it is for the 3.0 version. I combined that with the 3.1 version of the original mod, using TinkerCad. It has some rough spots, but works. I like that the spacers are not used and that it…
Star Trek theme badge model created for Subsector3D's birthday 2023. Designed with different heights to allow for color changes if desired.
Original by toymakr 3d
BOM: 1x - Cartographer Flat Pack 2x - M2 Nylon bolt ( 50pcs M2 M2.5 M3 M4 Black White Nylon Plastic Phillips Pan Head Cross Round Screw Bolt length 5mm-50mm - AliExpress 13 ) 4x - M3 Heat Inserts 4x - M3x8 26-30 AWG stranded silicone wire…
A AMS adapter ring for R3D paper spool, prevents R3D spool from jamming in AMS. If jams still occur, they can be relieved by using this desiccant spool tumbler filled with desiccant.
After printing and assembling Dustin's design I discovered that between my print settings and the thickness of the bottles I was trying to cut the plastic strip was forcing the bearings apart rather than being cut by them. I added a rib…
Using a Creality CR-10S as a driver and LCD? To use it with stock Firmware without reflashing, you’ll need to make sure to have a thermistor connected to the bed as well closing connection on the filament runout sensor. Then the g-code…
The Recreator3D community cutter works well for cutting PET bottles for pultrusion recycling, but normally needs labor-intensive disassembly and reassembly to swap out the top part for different cutting depths, making it difficult to…
The Galaxycore of the Masterspool is a good idea, but the model had two problems: the tips of the wings are too thin and break off easily the thread had some errors in the stl-file (you can see them if you zoom in in your slicer), so it…
updated 4/10/2020 V7 more cowbell (height shaved off) I have been able to print 1 per hour updated 4/9/2020V6 shaved down height to save time and material updated again 4/2/2020: V5 added a version with a solid cover for the top updated…
This innovative model introduces compatibility with a plastic brusher designed specifically for effective nozzle cleaning. Additionally, the model supports Cartographer 3D Please prefer to use ABS or ASA filaments. UPDATE 13/4/25 I…
!!! Attention !!! This project is still being produced. Please be careful of any possible damage. --- Print Setting 3 walls 20% 3D Honeycomb. The outer gear should not use brim. Aggressive elephant foot compensation is OK. All part not…
Original on toymakr3d.com
I purchased Victor3D's VLMP Heat Set Insert Press Kit and I'm using it with a Weller WESD51 soldering iron. My use of the soldering iron is not exclusive for pressing heat set inserts, so I made a small cable management clip that allows…
It is just a hacky remix of JamesK1 TS100 case to allow two additional tips for the miniware TS100 soldering iron. Print it without support. PETG works best. PLA is okay, if it is not a very brittle version of it. Use Filament or a 1.75…
Ho realizzato questa base per poter montare l'Hero Me Gen 3 fan duct, gli altri pezzi potete recuperarli dal progetto originale. I fori per fissare le ventole sono stati adattati per usare dei bulloni M3. Il file potrebbe avere ancora…
Replaces the TR8x8 leadscrew & nut with an M6 rod. Uses an M6 nut. Optional retainer ring.
modified PET bottle cutter to press-fit Singapore SGD 10 cents coins.
I recently bought a bunch of filament during a recent sale from Matter3D so I made labels for each type I bouth.
i made this to help quickly wind a spool with stripped down plastic bottles. for PET/HDPE recycling added the mounts, spacers, rod, and spool for a complete set! also has a 9v battery terminal adapter, fits M4 machine screws for…
I wanted a diffuser for the daybreak neo leds I had on my trident 250 the original file was too short so I adjusted the file to suit the vector3d daybreak neo led strip.
This remix adds a plate to the left of the hotend on a Recreator3d MK6 Fun Size, replacing the mini spooler. This plate is designed to be used with the V3 Community Bottle Cutter and has the appropriate matching M3 mounting holes, as well…
Original by Toymakr3d
This is a main carrier for XCR3D 2in1 hotend for a Sapphire Plus/Pro/SP-5 Bowden. I love this hotend, never gave me any headache. Used different part cooling fan guides, its a remix as well, changed them a bit. Im not a professional CAD…
Motivation The Recreator3D MK5 build assumes you have an Ender3 V1. In my case the donor printer was V2, so many things had to be adjusted for the V2 parts, including the fan shroud. The fan cover STEP file taken from Creality GitHub was…
The original cooling fan wasn't strong enough, so I made this stronger version. Printed parts: holder 1x cover 1x spacer 4x Other parts: 24V* 40x40mm cooling fan 1x M3 bolt 4x M5 bolt 2x M5 T nut 2x *You can also use a fan with a…
Simple part cooler for XCR3D 3in1 S1 (non-mixing) aka BigtreeTech ZSYong 3in1 hotend, attached at the heatsink with existing fan screws, uses 50x15 blower fan. Printed without support.
Love Vector 3Ds threaded insert press but wanted a stand to hold it with parts trays for the inserts and having a stable base to work with. trays inner walls are all curved into the center so you arent digging in the corners for the…
This is a remix of Part 5B for the Recreator3D MK5 series of PET Pulltruders. This now uses a 608 bearing in place of the POM wheel. If you wish to remix this to use a different size bearing or for any other reason feel free to find this…
A simple modification of the RainbowShift case from Vector3D to add in place a DC barrel jack connector, to make wiring / powering easier. RainbowShift can be purchased directory from https://vector3d.co.uk/product/rainbowshift The DC…
ITA assemblare il gruppo e fissare alla base con una vite a esagno incassato M4 X 70mm con dado normale M3 annegato dal lato opposto. fremare l'anello in testa senza fermacavi utilizzando 6 brugole M3 X 8mm Con fermacavi aggiungere una…
A spacer for the hexagonal hole in the reduction gear that mounts on the wheel bearing. The hexagonal walls are too large to capture the hexagonal locknut, but the standard Ender M5x30mm bolt can be inserted in the well. This spacer makes…
This is a mod for the Recreator3D MK6 that turns it into an Automatic Material System (AMS) which is able to automatically feed new filament into your printer when the filament you started the print with runs out. Purpose: When making…
Remix pour la mise en place d'un Micro Interrupteur Fin de Course avec 3 Broches comme détecteur de fin de filament. Eng Remix for using micro switch with lever arm for the filament sensor. Category: 3D Printer Accessories
Laser cut out of 1/8in or 3mm plywood or acrylic and glue together. you can add or subtract inner pieces for different width pet strips.
Uno dei miei modelli più belli e pieni di significato Ho 4 figli ognuno ha un puzzle con il solo suo pezzo di colore diverso Solo quando si trovano tutti e 4 potranno fare il puzzle del colore particolare Logicamente ho messo il modello…
You can't really use the cnc belt teeth, as the belt needs to be in front in an mgn9 setup. I use these in addition to the metal clamp provided with the cnc toolhead carriage.
Adapter plate for the Recreator3D MK6 filament maker. Replaces the power plug used with the internal power supply with a plug for an external one. The power supply I used is liked below.…
this mount uses the existing stock probe holder allowing vertical adjustment and minimal changes to the printer. fits kobra neo and similar printers. In printer.cfg these are the printer specific settings that need changed in addition to…
The Daybreak has a different diffusion system, which my ptfe was hitting. This diffusion bar is much better in that regard. I had to remix because the screw was at the wrong spot. I created 3 versions: 2mm thickness (original) 0.6mm…
Spool Insert for the flimsy carboard spools that Matter3d use to help the rolls spin smoother on your spool holders
Please watch the development of this project: and follow me on instagram and youtube for more content like this :D @raphaelbastosdesign You can print it at 0.2, 0.15 and 0.1 layers heights. Use the orientation show in the 4th picture and…
This mount uses the existing stock probe holder allowing vertical adjustment and minimal changes to the printer. fits Kobra neo and similar printers. In printer.cfg these are the printer specific settings that need changed in addition to…
You will need to print the plunger, cap, and one of the tubes. I have uploaded two sizes to allow for printing on machines with different Z heights. If you want you can substitute the printed tube with a piece of PVC pipe from the…
If you wish to use the Cartographer3D with the original lid riser, there's no straightforward route for the USB cable to follow, meaning that not only do you have to drill or file a hole, but you need to make it large enough for the plug…
Print one normal one mirrored. The cover was made by Sacr3D Etching https://www.prusaprinters.org/de/prints/64576-mini-12864-screen-cover-and-brackets-for-bear-fram
