20,419 models
NO, THERE IS NO WAY TO GET A LICENSE TO SELL THE BOX COMMERCIALLY. MY DESIGNS WILL ALWAYS BE FREE FOR NON-COMMERCIAL USE ONLY. PLEASE STOP ASKING! The design is based on the " Tool box parametric " by Yanev and provides some more options…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
IMPORTANT Read the description carefully before print! Check the changelog at the bottom before printing, there might be updates to the model The original model and the parametric one are not stackable with each other! Prusa Mini version:…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for PETGSource material: PET
V2 : increase of the mecanical play of the axis to avoid that the two parts are welded during printing. Improved closure. Just change the dimension in fusion 360 to resize it.
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
Print orientation: flat
Print approx. €0.24–€0.30 excl. taxPreliminary estimate for one variant
I saw a few models on here for printable SKADIS pegboard and I love the idea. However, many of the models were dimensioned wrong for my printer or intended purpose. I decided to make a simple to edit, parametric file for generating…
Print approx. €14.37–€17.56 excl. taxPreliminary estimate for PETGSource material: PET
For Raspberry Pi Zero W so you can use Octoprint with your MK3/MK3S/MK3S+ printer. https://help.prusa3d.com/en/article/raspberry-pi-zero-w-preparation-and-installation_2180 If you prefer a step-by-step guide, it is available here:…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for PETGSource material: PET
Remodelled version of Filament Dust Filter by sneakypoo . Almost identical to the original, but remodelled from scratch in Fusion 360 making it parametric so it's easy to tweak and sharing the F3D file so anyone can easily customize it.…
Print approx. €0.24–€0.30 excl. taxPreliminary estimate for one variant
Tested in PETG, recommended to print in PETG
Print approx. €0.52–€0.63 excl. taxPreliminary estimate for one variant
Inspiration: https://makerworld.com/en/models/815908-over-door-hook-wall-shower-hook-many-thickness#profileId-767349
Print approx. €1.17–€1.43 excl. taxPreliminary estimate for one variant
5 different sizes M3 corner mount brackets. Customize to your liking using the STEP file. suggestions are also possible
Print approx. €0.35–€0.42 excl. taxPreliminary estimate for one variant
Extension cord holder, easy to print! Mounted using screws D=3mm. Customizable using the STEP file. :)
Print approx. €2.29–€2.80 excl. taxPreliminary estimate for one variant
Updates 09-12-2023: Fixed several basin parameters & updated to Blender 4.0 . Updated Files - Parametric Seed Starter.blend 18-07-2023: Added a mid-section to the air-pruning strips in the cups. Updated Files - SeedStarter_0.4n -…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for PETGSource material: PET
Update: Extra hole for screw mounting ( d = 3 mm )
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Update: Print in place hinge, better snap, better opening handle Print orientation: side
Print approx. €0.57–€0.70 excl. taxPreliminary estimate for one variant
MTG Commander Deck Box 100+ sleeved cards. Default inner dimensions are: width 70, depth 65, height 93 mm but all can be adjusted. Parametrized Fusion360 file for easy adjustment included. MTG deck box for 100+ sleeved cards. Heavily…
Print approx. €7.18–€8.77 excl. taxPreliminary estimate for one variant
This is a custom-designed picture frame, available in several sizes and configurations. Each side piece prints individually and connector pieces hold it all together. There are several variations of the connectors depending on how tight…
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant
Unstable fusion360 source file It seems like a recent F360 update broke the model file. Since it is not the first time, I'm in the process of ditching Fusion360 from my workflow altogether. I'm learning FreeCAD and will attempt a redesign…
Print approx. €1.51–€1.85 excl. taxPreliminary estimate for one variant
Model consists of 4 bars (two sides, upper one and lower one) and four connection pieces. The longest one is the side bar and can only be printed diagonally on the bed. Lower bar has two integrated latches that hold the picture from the…
Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant
Für meinen Virtuellen Flipper (VPin) habe ich eine einfache und kompakte PC ATX Halterung gebraucht. Es sind vier Druckteile notwendig. Das linke und mittlere hat eine Aufnahme, um das Netzteil darunter festzuhalten. In dem Beispiel ist…
Print approx. €5.59–€6.84 excl. taxPreliminary estimate for one variant
Very nice skull made out of a fine mesh. Can be printed in different scales and used as a coin holder or just an organzin help. Print instructions To achieve high detail, print with a 0.25 nozzle at 0.10 mmlayer height and lightly torch…
Print approx. €7.78–€9.51 excl. taxPreliminary estimate for PETGSource material: PET
You can print and use this to replace existing adjustable bed frame support, which is usually made of weak and thin material. I recommend to glue a piece of rubber to the foot to avoid any noise. 0.3mm, rPETG, 5h.
Print approx. €5.15–€6.29 excl. taxPreliminary estimate for PETGSource material: PET
This design was inspired in 2 other designs in this site: https://www.thingiverse.com/thing:2339441 https://www.thingiverse.com/thing:2668159 Since I could not find for the original file to adapt it to my battery with protection circuit…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
Modular Picture Frame Kit Update 03/06/2026 The metric frame parts 120mm up to 180mm angles were wrong. They were 44.13 degrees and should obviously have been 45 degree cuts for the corners. Thanks to Frey4cre for pointing this out. These…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for PETGSource material: PET
Did you lose/break the lace lock on your shoes, coat, sweatpants, hoodie, or camping gear? Did they not come with one to begin with? Say goodbye to self-untying shoes and slowly descending sweatpants with this 100% 3D printed gadget.…
Print approx. €0.15–€0.19 excl. taxPreliminary estimate for PETGSource material: PET
A modern approach to the wavy style plant pots with the use of parametric settings. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a…
Print approx. €3.72–€4.55 excl. taxPreliminary estimate for one variant
A standard and dual screwgate locking carabiner, using a print-in-place pivot mechanism, and available in multiple sizes . The STLs for three different sizes of each style are included here for convenient printing. This model is fully…
Print approx. €0.82–€1.00 excl. taxPreliminary estimate for one variant
[DESCRIPTION] This model is a battery adapter : from battery parkside x20 team sold by Lidl to any Makita tool using 18v battery. It is an remake from Myle's work (see : thingiverse.com/thing:3110392 ). Thickness differs from original…
Print approx. €2.44–€2.98 excl. taxPreliminary estimate for one variant
Parametric glue spreader. No need to go to the shop. The print files all have teeth glue lines 1,5 - 2,5 - 3,5 mm. The shape of the glue line is triangular. The FreeCad file is included so you can modify this trowel exactly to your needs.…
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for one variant
Easy to assemble stand for a 4”x6” photo frame. Having a few homemade ¾” hardwood photo frames for 4”x6” photos, it was only natural to come up with a sturdy stand for them. Hopefully these will work for you. The stand’s back is around 6”…
Print approx. €2.63–€3.21 excl. taxPreliminary estimate for one variant
This is simple picture frame with stand. The connection between the front part and the rear part is press-fit. Originally the frame was created for a picture height / width: 105 mm / 150 mm (PictureFrameFront.stl,…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for PETGSource material: PET
This is a parametric planter with a vented, self-watering reservoir and water level indicator. I designed this in Fusion 360 and have included STLs for a 4", cylindrical version with interchangeable smooth, fluted, and knurled variants in…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
I wanted a wall hanging frame for my selfprinted photos wich didn´t need much filament and looks fancy ;) The frame is scalable through the parameterized f3d file. Depending on your printers print quality, the inner frame sit´s tighter or…
Print approx. €0.29–€0.36 excl. taxPreliminary estimate for one variant
Update 2025-06-01 : Added STL files for a spool column to allow spool stacking. They're sized to allow for a wide variance in spool widths and hub diameters. I've got a bunch of filament spools sitting around, and wanted to turn them into…
Print approx. €0.34–€0.41 excl. taxPreliminary estimate for PETGSource material: PET
Remix of my IKEA Halvklart lithophane picture frame New back design Added more stars New button What you need Printed parts (frame, cover, button) IKEA Halvklart USB LED spolight Don't forget to look at the remixes that use different…
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant
This is a parametric model for detergent brands that lie on their side and dispense out of a spout. The model clips onto the spout and provides a tray to catch drips and store the detergent cup. See the comments in the OpenSCAD file for…
Print approx. €2.57–€3.14 excl. taxPreliminary estimate for one variant
Box for 85mmx54mm card 35mm of storage You cant find cards size and height in 3df file parameter. Print an glue 5mmx1mm magnet. (see my board game collection : https://www.prusaprinters.org/social/38889-djedje_zr7/collections/72597 )
Print approx. €1.79–€2.19 excl. taxPreliminary estimate for one variant
This is a parametric door threshold ramp to help robot vacuum cleaners to get over door lips. If your printer can produce good bridges then I recommend printing it in the finished orientation to create a surface for the wheels of the…
Print approx. €3.12–€3.81 excl. taxPreliminary estimate for PETGSource material: PET
UPD v23: Fixed wall thinkness issue on top cover UPD v25: Fixed fillet fails to calculate for small “holes"; Fixed top/bot X axis pattern for large boxes (>50mm width) UPD v26: Fixed side wall holes number and offset calculation, now…
Print approx. €2.56–€3.13 excl. taxPreliminary estimate for one variant
Make your collection visible New version of TCG display is available collection https://www.printables.com/model/1490952-multiple-tcg-sports-cards-wall-holder-and-display PSA graded TCG spots cards wall holder and display frame.
Print approx. €2.48–€3.03 excl. taxPreliminary estimate for one variant
Hungry? I know I am, but you cant eat this benchy! This is a wacky benchy that is surprisingly easy to make. 80mm/s and .9 layer height, zero infill, use a .4 nozzle. Make sure to set nozzle diameter to 1 ! And 1mm for all extrusions! If…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
Info: remodelled and made a great model from @Meistel Edel (thx!) parametric , so any size can be easily created any width/height any number of holes the plate is 3.2mm thick Variations: exported few most common variations for convenient…
Print approx. €0.83–€1.01 excl. taxPreliminary estimate for one variant
Magnetized dust collection couplings are not my original idea, but I was tired of searching for a model that fit the many unusually sized dust-ports in my shop, so I made this one parametric. Assembly involves gluing your magnets into the…
Print approx. €12.98–€15.87 excl. taxPreliminary estimate for PETGSource material: PET
Modified from default caps to custom-made for 3d printer upper v-slot frames. I used it for my Creality Ender 3 v2 printer but it might work for other models too. Basic parameters: Dimensions: 210x210x72 mm Supports: not required Please…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
Embroidery sock frame is a great tool, but the model needs some tweaks for brother 10cm hoop even after setting the params in OpenSCAD. The most important is that the model needs some room beneath. I made room beneath, strengthened it and…
Print approx. €1.13–€1.39 excl. taxPreliminary estimate for one variant
Quick fix for RJ45 plugs whose little clip broke off. Because there are so many variations of RJ45 plugs and every one needs a different version of this model, I uploaded a .STEP file and an editable Fusion 360 file where all the…
Print approx. €0.10–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
To edit the text in PrusaSlicer (you must be in Expert Mode ): Switch to 3D editor view Right click on the text to be changed. Select “Edit text”. Edit the text. Slice! For multi-color, add tool changes or filament changes at the desired…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
UPDATE: added a currently untested version with a small hanging hole, the files for this print are marked with _hang stargate: print with supports at 0.12 base: no supports, i printed at 0.12 but 0.2 should be fine base: no supports, i…
Print approx. €2.22–€2.71 excl. taxPreliminary estimate for one variant
I designed this picture frame in Fusion360 to be customizable, print support free, snap fit together easily and feature a storage spot inside for special items. It is intended to fit a 4"x6" or 100mm x 150mm photograph. I used a piece of…
Print approx. €0.57–€0.70 excl. taxPreliminary estimate for one variant
I needed some clamps for an unusual PVC pipe I had laying around. So I made this design inspired by our local generic hardware store clamps. It's parametric and can be customized in Fusion 360. The minimum pipe diameter is 16mm. There are…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
A simple, modern picture frame stand, with a low profile so that it is hardly noticeable. Fits most picture frames and works for portrait or landscape orientation. Can also be used to stand up signs and other artwork.
Print approx. €4.55–€5.56 excl. taxPreliminary estimate for one variant
This is a fully printed quadcopter frame, which can be flown acrobatically and has mounting points for a lot of different components. I designed it as a testing platform and made it as modular as possible. The arms went through multiple…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Low poly model of an egg (only the wireframe) Print instructions Use a brim (About 5 - 10 mm) Can be printed without any support (possible that some oozing has to be removed) Print with 0.15mm layer height For better results use the Layer…
Print approx. €3.12–€3.81 excl. taxPreliminary estimate for one variant
Info: well, I have jumped into the “remote holders contest” (for hiding them in a convenient way) too late, but I finished this model (and printed 😀) just on time design is parametric (see source file), so any book width/height is…
Print approx. €4.47–€5.46 excl. taxPreliminary estimate for one variant
This is a drawer organizer for Nespresso Vertuo pods inspired by the $20 ones you can find on Amazon. However, unlike those, you can customize this to exactly fit your drawer: just update the code with your drawer dimensions and generate…
Print approx. €8.25–€10.08 excl. taxPreliminary estimate for one variant
Based on the design from @Kittelot and trimmed in order to fit on the Prusa Mini. I also removed the center of the backing in order to save on material since it was not required. It fits 4x6" photos nicely! Print Settings: Print with…
Print approx. €0.48–€0.58 excl. taxPreliminary estimate for PETGSource material: PET
Case to GL iNet Slate 7 router. You will need six M3x30 screws to assemble it.
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for PETGSource material: PET
Este es un juego de ajedrez completo para impresión 3D , diseñado desde cero en FreeCAD con un enfoque paramétrico , limpio y funcional. El proyecto incluye los archivos fuente originales de FreeCAD , lo que permite modificar fácilmente…
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant
Recommended printing settings (or download gcode): Infill: 80%+ Brim = enabled Supports = Everywhere Orientation: see image This 3D-printed sawtooth frame hook is designed to provide a secure and stylish way to hang your artwork using…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
I have made updated model with lid and viewing ports, check it out: New version I present to you fully parametric boxy things dispenser - originally meant for dishwasher tablets. You can use it of course for anything with boxy shape.…
Print approx. €3.21–€3.92 excl. taxPreliminary estimate for one variant
Small storage box with size 8x8 cm and 5,5 cm height, or any dimensions you want. The Freecad model is parametric so you can change it to any size you want. Just change the parameters in the spreadsheet inside of Freecad. The walls are…
Print approx. €0.92–€1.12 excl. taxPreliminary estimate for one variant
A simple 4x6 picture frame. My daughter needed a picture frame for a school project. Nothing too fancy, just glue or tape the picture into the frame.
Print approx. €5.89–€7.20 excl. taxPreliminary estimate for one variant
Features Holds 56 standard bits + 9 Long ones (my kit has 52+4, so there are slots to spare) Holds the magnetizer/demagnetizer thingy Has a small pocket for carrying miscellaneous items, plus 7 more slots in the lid, where you can put…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
Check out the attached instructions.
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant
This upwards facing picture hook is made for canvas printed posters on wooden frames. They have a closed wooden frame all around and getting them on the wall with a zero gap is difficult with normal picture hooks. That is why I designed…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for PETGSource material: PET
🔒 Notice of Use This design is for personal, non-commercial use . Commercial use is not permitted, either digitally or physically . 📩 If you would like to obtain a commercial license , please contact me directly or sign up here:…
Print approx. €2.26–€2.76 excl. taxPreliminary estimate for one variant
It's just a bit of fun. I have designed and printed a pair of glasses frames to suit my glass's lens shape in clear PETG Prusament. I have attached the part models of the frames and arms in a STEP format if anyone would like to customise…
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for PETGSource material: PET
My Voron 2.4r2, 300mm, is fully paneled with Plexiglass. I designed these feet to be used with 450mm 2020 extrusions for the ERCF MMU and still be able to utilize panel clips, and be able to remove the plexiglass panels for printing PLA…
Print approx. €4.82–€5.89 excl. taxPreliminary estimate for one variant
Present and display your collectible photo cards in these elegant picture frames Prints without support due to multi parts click connect design 75° angled to mitigate reflections 56mm x 88mm maximum size of the card Separate inner frame…
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for one variant
The "Parametric Magnetic Hinged Box" is a 3D model made with FreeCAD. Designed with different needs in mind, it offers a hinged lid and magnetic fasteners for a secure close. It's versatile and perfect for multiple uses, like lunch boxes,…
Print approx. €0.62–€0.76 excl. taxPreliminary estimate for one variant
Instructions For assembly you first need to print all three parts and proceed with the following steps: Grab the rotary part, an soldering iron and your two M4 threaded inserts. Install both inserts at both sides as seen in this video.…
Print approx. €5.36–€6.55 excl. taxPreliminary estimate for one variant
I shoot a lot of Instax, especially now that I adapted a LomoGraflok back to my Graflex SLR, and I like to scan the film for sharing or before giving away the unique physical copies after shooting portraits. I designed this frame to save…
Print approx. €1.58–€1.94 excl. taxPreliminary estimate for one variant
A waffle structure bowl! Easy to assemble and looks great in any place - can store decorative balls or fruits - depends on your liking. Print information: Recommended using a lower layer hight (0.15/0.2mm) and a smaller nozzle (0.4/0.3mm)…
Print approx. €0.40–€0.48 excl. taxPreliminary estimate for one variant
Add a touch of passion to your home or office with this Prusa logo wall art! This creation has been carefully designed. It's the perfect accessory for 3D printing enthusiasts, technology aficionados, or anyone fascinated by the beauty of…
Print approx. €10.85–€13.26 excl. taxPreliminary estimate for one variant
I wanted to have a picture of my family on my desk at work, so I created this simple Instax photo frame. Prints at 0.2mm, no supports, Prusament Galaxy Black PLA. UPDATE: [03.03.2024] V2 Design available with bigger clearance and extended…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
Print with PLA or PETG with 0.25mm or 0.3mm layer height. Place on one side left or right doesn´t matter. Turn on “ Brim ”, otherwise the print might get loosened due to small adhesion surface on print bed. No supports needed. You can…
Print approx. €0.35–€0.42 excl. taxPreliminary estimate for one variant
Simple box to keep ramen organized in my cupboard. It is sized to fit at least a package of Neoguri.
Print approx. €15.43–€18.85 excl. taxPreliminary estimate for one variant
This print can be used to display award medals on a wall. It consists of two modular parts, a frame and a plate. There are two versions of each. The frame has both a simple version and a version with mounting slots to simplify attaching…
Print approx. €1.08–€1.32 excl. taxPreliminary estimate for one variant
Design can be modified inside OnShape completely by using Variables. Link to OnShape…
Print approx. €3.69–€4.51 excl. taxPreliminary estimate for one variant
English see below Das Scharnier ist vollständig parametrisch erstellt. Parameternamen klönnen dem Bild entnommen werden und direkt in Fusion 360 verändert werden. Damit die Komponente kann in eigene Modelle überniommenw erden kann, habe…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for PETGSource material: PET
This is a simple openscad model of a washer for any screw size you need. Simply modify the dimensions to your needs. The cost of printing is close to zero and the time to warm-up is most likely the longest part. The worth of being the…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant
Frame your memories with love using our unique accessory, a heart shaped instant camera frame. Let each photo tell a tale of affection as it rests within the gentle curve of our Heartfelt Memories frame, adding a touch of romance to every…
Print approx. €2.03–€2.48 excl. taxPreliminary estimate for one variant
Držák USB flashdisků apod. Určen především pro montáž na zeď. Update v3: plně parametrický FreeCAD model, STEP model nastavitelný rozměr otvoru, hloubka, rozteč, úhel, délka, průměr montážního otvoru, … Update v3: full parametric FreeCAD…
Print approx. €1.47–€1.80 excl. taxPreliminary estimate for one variant
The gcode fits for HEUER FRONT 140 with replaceable jaws. With the FreeCAD file (.FCStd) you can easy customize the protective jaws for many other vices. In particular, round or oval workpieces can be securely clamped and worked.
Print approx. €4.99–€6.10 excl. taxPreliminary estimate for one variant
I wanted to design something slightly more compact and easier to use than my original travel case with integrated stand. In the end: it's slightly more compact there is a version of the stand in which you can insert a 1€ coin to add…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for PETGSource material: PET
Print model with PLA, PETG, ABS using 0.2 layer height, 15% infill. I use 0.6mm nozzle but 0.4 will also work. Prints without support. You will need 2 small magnets per frame: 5 mm in diameter and 2 mm thickness. You can get them cheap…
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant
This model was designed to be a table display for Instax Frames. It can be used together with my Instax Frame and Keychain model or with standalone Instax frames. Printing Advice This model requires a little bit of support on the camera…
Print approx. €2.94–€3.59 excl. taxPreliminary estimate for one variant
See: https://github.com/prusa3d/Original-Prusa-i3/pull/172
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for PETGSource material: PET
This is a standard embroidery hoop that uses M3 fittings for the tightening mechanism. The default size has an inner hoop diameter of 80mm and a mesh file is included for that size. Please note that this model should be sliced with pauses…
Print approx. €2.07–€2.53 excl. taxPreliminary estimate for PETGSource material: PET
This watering can attachment makes it possible to water with pinpoint accuracy even with large watering cans (10 L).
Print approx. €0.57–€0.70 excl. taxPreliminary estimate for PETGSource material: PET
This is a screw mounted zip tie mount. It fits 4mm DIN screws, but you can edit the .scad file to make it fit any screw or zip tie. To customize, you will need OpenScad and the dimensions relevant for customizing (just measure them but…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for PETGSource material: PET
A rugged parametric box for spare fuses for your car/motorcycle/caravan. It holds 19 fuses. You will need 3 М3х40 bolts and 6 M3 nuts for the hinges. Print settings: Print in PETG the box and the seal in FLEX material; 0.2 Structural…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for PETGSource material: PET
A friend of mine shared a link to buy this kind of object, and I decided to make an easy to parameterize and 3D print version. ^w^ Usage: Simply press the object firmly onto the injection site (the side with the spikes facing the skin)…
Print approx. €0.43–€0.53 excl. taxPreliminary estimate for one variant
To fix the frame with the 2.5" drive, use the original screws that are used to fix the 3.5" drive to the cabinet. K upevnění rámečku s 2,5" diskem použijte originální šrouby které se používají k upevnění 3,5" disku do skříně.
Print approx. €0.84–€1.02 excl. taxPreliminary estimate for PETGSource material: PET
These transplant pots are 3D-printable versions of the thin black plastic starter containers you might find at your local nursery. These pots are designed to be semi-flexible to allow for easy removal of a started plant by gently…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for PETGSource material: PET
===Update=== Stand added ===Update=== Instax Mini Magnetic Fridge Frames, with an overall thickness of only 3mm. I recomend the textured sheet for a shiny surface finish. The frames can be equipped with magnets (6mm x 3mm x 1.5mm) to…
Print approx. €1.57–€1.92 excl. taxPreliminary estimate for PETGSource material: PET
T connector for hoses that I use for my ant farms. I made the design parametric (inner diameter, outer diameter and length). I also uploaded some STL for a 9, 10 and 12mm hose (Respectively 7, 8 and 10 inner diameter).
Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant
This 3D-printed IDC box header frame is designed to convert a regular 2-row pin header into an IDC box header. This is a useful solution for those who need to replace an IDC box header but cannot find one in stock, or for those who want…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for PETGSource material: PET
Simple little holder for instant pictures
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant
The settings in the 3mf file use 1.2 mm extrusion width on a 0.4mm nozzle, which works great on my printer, but YMMV. The 3mf is set up for PETG, but includes 100% fan and slower minimum speed, because my first attempt with less fan and…
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for PETGSource material: PET
Timeless parametric (many sizes) model of various étagères to choose from. A perfect addition to the nutcracker model (which is also nice and easy to print). - highly print-optimized. - each form ca be easily split in slicer to remove the…
Print approx. €3.82–€4.67 excl. taxPreliminary estimate for one variant
