Counting matching models…
Do you have an Arctis Nova Pro Wireless? Do you like a clean looking desk top? Do you not want to have to reach too far to adjust the volume or other settings on your Arctis Nova Pro Wireless? If your answers are Yes, then here is a…
Remix of Minecraft Sleeping Fox. Designed so tail section fits better as an assembly to look closer to one solid piece.
Leap into Frosty Adventure – the Arctic Fox! 🦊❄✨ Dashing across snow-covered fields and beneath shimmering auroras, the Arctic Fox arrives with playful charm and a tail as fluffy as the northern clouds. With its sleek body, perky ears,…
The Arctis Nova Pro uses a different ear cup mounting mechanism than past headset versions, preventing the use of existing replacement ear cups. Along with the availability of compatible replacements only using faux leather (hot and…
A under desk mount for Steel Series. Should just slide in from the front.
This is a 3d printable Magazines for the Tikka T3X Tac A1, CTR and Arctic rifles. Included are models for a 5 rnd and a 10 rnd version (with the 5 round variant being the more practical choice) which are a dircet replacement for…
Due to climate change the polar bear has become an threatened species. ** Making people aware about the situation has already helped other animals. Let's do the same for the polar bear and start printing en showcasing this low poly…
For commercial license subscribe to my Merchant Membership ! The Arctic Dragon has awakened from the frost—now in two sizes! ❄ Meet the Baby Arctic Dragon, a small and adorable poseable creature, and the Elder Arctic Dragon, a majestic,…
A cheap and easy fix for cracked and broken Arctis headphones, You will need, Retaining Clip plyers or E clip plyers Loctite Super glue MUST BE THIS TYPE! A soldering iron A screwdriver A 11mm or 7/16" drill bit OR Dremel and patience……
Arctis Nova Pro Wireless controller under desk and side mount. Attached with Screw holes, or an .STL for no screw holes if you wish to attach with double sided tape as I have done. I made 7 different variations of these mounts before I…
Cool model, great for a gift. Support me by liking this model, it only takes one click! And if you can, please follow me! This dragon took some time to make. To print this model, just download the file and print it! No supports are needed…
Note! There is now a V2 version of this toolhead cover available. Multiple fixes and improvements, including STEP file support and a removable fan duct. You can find the new version [here] . Didn't like how the Ender 5 Max had no airflow…
A very cute articulated Minecraft Arctic Fox, the tail and the legs are articulated and move. I painted the nose and eyes with a pen. There are two versions, one bigger and one smaller(80%) Hope you like the model
Best to mix up the colours for the insert. Use supports for the overhang at the top. (warning I haven't done many tests for the tolerances of the inserts, please let me know if it's not the right size)
It's my remix scaled down of the snowmobile of 3Drcnc. Lot of work and test on this open source project to make it easy to print, easy to build, powerful, reliable and easy to buy parts to make it (same screws and bearings for all the…
Description Garmin just released a new version of their popular Varia Radar system: the RCT715 . This product diverges from the rest of the Garmin line, in that it no longer has the quarter turn mount, and the existing mounts out there…
EN version : The original Scan was made by the Mammal Research Institute, Polish Academy of Science during the Open Forest Data project . You can download the original data here . :) I fixed the model to make it printable. The skull is…
Just made an adaptor for the steam frame to use a wireless face tracker please be careful when attaching. I removed the original design as it felt way to risky and didn't hold very well. I know provide a mount designed by Chell, just with…
This is a set of blocks that can be used to recreate the Arctic Batman figure that was part of the Arctic Batman vs. Mr. Freeze: Aquaman on Ice set from 2013 at 500% scale. This is a rare figure that's only appeared in this one set. All…
I need to travel with my headset sometimes and decided to create a case for it! Can hold both the headset and the DAC along with any cables you may need as well. DAC fits in the middle of the headset band (see image) inside the case. Fits…
Case for TRCT5000 infrared sensors with positioning help. Fits easily and needs no screws. If you want to see the status LEDs, just print the top part with transparent or white filament. Print Settings Printer Brand: Creality Printer:…
Welcome to version 2! This is the new and improved version of my original Ender 5 Max toolhead cover. There are a few notable improvements in this version. - Shell thickness has been optimized to be more consistent and a touch thicker at…
M,in,te,d - Arcturus More in the design I have added more in the current design of the Arcturus by Lixulia.https://github.com/Lixulia/Arcturus The Arcturus case is an already solid case however I wanted to modify it to what I feel is the…
Arctis Nova Pro Wireless controller under desk mount and headphone holder. Headphone holder bracket added to under-desk design
Arctic Liquid Freezer III AIO Radiator Tubes Comb 13mm spacing
This model does nothing but add a base to the AM waveform design from here by ABCDOMG. I've added the original file (sized appropriatly to fit the base) but other than this nothing was changed.
cookie stamp of arctic animals :)
Custom DIY case for the Retro Chip Tester Professional (RCT) After getting my Retro Chip tester assembled I was looking for the best housing option. I found a few models in a zip from the Retro Chip Tester website (…
Mounting bracket to allow mounting the base station for a SteelSeries Arctis Nova Pro headset under a desk. Print standing on the back end; the stopper on this end doubles as mouse ears to enhance adhesion.
A can holder that clips on the top of your 2013-2014 XF/M (likely more years and models compatible) gas cap. The holder accommodates a 355 ml can with neoprene koozie. 3D model found here if you want to tinker -…
Simple holder that mounts on the wall for the Arctis Wireless Pro headset (should work fine with the wired version). Can print decently without support, and be mounted with regular screws into the wall as there won't be a lot of weight on…
I wanted to eliminate an audible hum I was hearing from a couple of my P12s, so I designed this 2mm dampener. You could use these with any 120mm fan, of course, but the corners are cut to match the P12 series specifically. There are 2…
Articulated Fox, with both Arctic and Fennec paint styles. Designed by Teal Cat Creative Please support our work and purchase a commercial license via our Patreon if you intend on selling our prints!
Enables you to mount your Steelseries Arctis Nova Pro DAC to your Aluminium profile simrig. The mount also has a place to store your spare battery.
A cable comb to help organize Arctic Cooling AIO radiator tubes. For use with 12.5mm OD tubes. I've only created one size and spacing for this, but it should be relatively easy to change if required.
Die Halter werden einfach aufgesteckt, habe sie auf einer 240 Liquid Freezer II verbaut, sollte aber auch auf die anderen Modelle von Arctic passen. Da die erste Version aus pla war und deutlich instabiler Gestaltet war habe ich sie nun…
Minor Update based on comments. - Added a left model that is mirrored I made this for the side of the headphones without all the electronics but it should work on both sides with some trimming. The square portion is ~11.4mm wide, and the…
Print these with support for smaller clip. Slot the front catch in first before clipping the back into place. Then slide the ears around into the purrfect position.
I printed these with PLA+ with a 4mm nozzle and 0.2mm layer height. I used the default Cura profile for PLA. I advise using raft for adhesion as it will help with the support material removal. You'll also need magnets from amazon, I used…
I added it so you can print just the name and cat in green and the back plate in black, if you wanted to glue them together. or print as one and paint the top layer. Most settings should work 0.4 nozzel 0.14 layer height 7% infill 2 walls…
This is an extender to use with the original cusions to get rid of the ANC mic bump. it will add 4,5mm to each cusion. Print laying flat without supports. I needed to use a small layer-size on the top clips to get a perfect fit.
Under desk mount for the Arctis nova pro wireless, charger. Printed in PLA with 3 walls. top and bottom. And 15% infill. Printed upright as shown in the preview, with supports for the overhang.
This is my own design for a "SteelSeries Arctis Pro Wireless" Headphone Stand. It fits exactly around the base / sender so you can hang the headphones right over the base. The connections fit exactly, so no glue is required (might need…
This custom mount for the Arctis Pro Nova and GameDAC Gen 2 is designed to provide a sleek and practical way to organize your headset and DAC amplifier. It’s easy to 3D print and compatible with most desk surfaces, offering stability and…
Small vibration damping pads to be printed in TPU that can be inserted in each corner of an Arctic P12 PC fan. Try some different amounts of infill to see what works best with your flavor of TPU. They clamp in place pretty well, but you…
Print in a higher temperature resistant material.
This is a remix for fitting my base I printed the Original part in DevilDesign Black PLA, and I wasn't able to fit the deck in the support without snapping in 2, so i made this remix to fix the problem Steelseries Artics Pro Deck
I took a lot of inspiration from the actual Honey Badger handguard and with a lot of trial and error, I got it to fit well and look good. It uses the retaining bolts and caps from the original handguard, and has very little give once…
This is the Support Arm Endcap for the Enraged Rabbit Cottontail Buffer for the ERCF v2 remixed to accept a BTT MMB CAN v2.0. The only change from the original v2 assembly instructions is the addition of two more m3 heat set inserts.
Porte clef yamaha ou arctic cat.
Hello! I designed in Fusion 360 to help get my DAC mounted underneath my desk.
Holder for Arctis Nova Pro Wireless and the Base Station Category: 3D Printing
I found a couple prints floating around for sale on Amazon but they were meant for cans, I wanted to be able to take my Contigo go cup full of coffee on the trail with me. Fits two styles of the Contigo cup, they are both a few years old…
Update Note: V8 .3mf file is revised based on a chunk of model I got from Tailfin. The new design matches the compound contours of the rack arch beautifully , but I didn't include the .F3D file of that version since I don't own the…
Clip-On mounting bracket to connect a TRCT5000 infra red sensor to a Elster BK-G4 gas meter to non invasively track gas usage by tracking the revelations of the little mirror embedded on the six on the last digit of the gas usage on the…
This Arctic fox statue balances realism and printability with simplified fur and strong silhouette. Shown as a real FDM print with visible layer lines for accurate expectations. Powered by MakerWorld – Image-to-3D…
Fairly simple part, settings vary between printer and slicer software and material. For this bracket I got really good results for the resolution and settings listed as well as a nozzle bed temp at 220/60c (Cura slicer 4.13.1). This…
Printed 0.15mm Filament: 3DJAKE magicPLA
I recreated the headphone cup caps (they may be called “Speaker Plates” for my SteelSeries Arctis Pro Wireless. It maybe be possible to FDM print these with a 0.4 mm nozzle, but I have not attempted it yet. I just wanted to try and…
Got tired of my drink mix scoop being a little to wide to easily dump into my soft flasks so I mad a quickie funnel. Fits just right for dumping a scoop of stick drink powder into a soft flask without getting all over... I don't use the…
Noctua fans are fantastic, however, not very budget friendly. A very close competitor for PC case fans is Arctic, specifically, the Arctic P12. I happened to have these fans installed in my rig and decided i wanted to try out Noctua's…
If you like this model and use it please upload a like, it really helps others find it! I wanted to use less plastic, verify it was v2.0 of ERB compatible and convert the ERCT to use the new fysetc ERB v2.0 which lets me expand to 12…
Remix of the shrek plates without the shrek ears
Help support my design work by visiting my referral links: Upland referral (virtual property trading game): https://r.upland.me/qk9X Unstoppable Domains referral: https://unstoppabledomains.com/r/cc353d5f40d64e8 Visit my website:…
Updated 11/14/24 Should load into slicer as intended to print, minimal or no supports. Thanks for the help with development and testing to user @Arson_2595054
Description This Arctic hare statue is designed for smooth printing and realistic proportions, presented as a real-world FDM print. Powered by MakerWorld – Image-to-3D https://makerworld.com/makerlab/imageTo3d
COVID is primarily spread through aerosols exhaled by an infected person. These can drift in the air for extended periods, infecting others in the same space. Filtering out these infectious aerosols is an important concern for maintaining…
battery compartment expender for the ar15/m4 arcturus pdw/karambit. with this mod you can fit 1200mAh/3s battery's (with the 40mm ring) without any problem. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No…
Simple holder for SteelSeries Arctis 1 Wireless headphones, would work with other headphones of the same brand with same cable extender for dongle. Jednoduchý držák pro sluchátka SteelSeries Arctis 1 Wireless, bude fungovat i pro jiná…
Remix. Just added some 12mm holes so it can be a bit more useful when sitting on desk.
During the past year I had to wear my Arctis 7 a lot more and for a lot longer than before due to lockdown and the transition to online. After prolonged periods of use, my ears started to hurt. Either I have big ears or the Arctis 7 has…
Steelseries headbands are notoriously bad. Comfy, but wear out easy. This clip for the Arctis Nova Pro is made to hold the headband securely in place. Printable in PLA.
A pack of arctic/tundra based miniature bases for all your wargaming needs (D&D, 40K and all the other abbreviations). This pack contains multiple bases and I'll update it whenever I add new bases to this category. I'll be discontinuing…
If you enjoy my designs and would like to support my work, or get a commercial license to sell prints of my models — you can join me on Patreon: 👉 https://www.patreon.com/cw/AR3DP --- The CF Arctic Fox captures the animal in a calm seated…
Please review, it was designed for someone else i cannot test it. 2025-04-10/No setback model now available no support PA6-CF 3rd iteration
Hi there, i designed an adapter for all Arctis ear pads for the new SteelSeries Arctis Nova Pro Wireless headset. assembly Instructions: You need to remove the ear pads (there is a video on youtube on how to remove it) check if the…
Arctic Liquid Freezer Einfache Aio Lösung für ein Schlauch-Management. Die Halter werden einfach aufgesteckt, habe sie auf einer 240 Liquid Freezer II verbaut, sollte aber auch auf die anderen Modelle von Arctic passen.
Hello, Welcome to my profile, full of models and miniatures :-) I have a Cute Arctic Moose Family for you, maybe for a diorama, or just for play. Very cute animals. It is suitable for coloring. My children absolutely love it :-).…
Realistic Arctic wolf 3D model – lifelike fur, muscular build, piercing eyes, rigged and textured for cinematic use. I use an A.I. App on MakerWorld then I bring the models into Tinkercad to fix them.
Arctic Cat Can Buddy. Sometimes when on the hill you want to stop and have a soda/redbull/water etc. This little guy will attach to the fuel cap and keep your can secure for you! This is not my own concept but I can’t find an original…
Steelseries Arctis Pro Cyberpunk plate Just need magnets once printed You can use multiple colors using mmu/coolor change as height are different for each colors. Though I would recommend resing printing and painting
This holder will let you place once for all the transmitter under your desk. It have not being designed to be removal. It's ugly but work's well. You can place it with 3M tape under a glass table or any desk. The battery tray is still…
There are a few thicknesses included. I printed with Overture High Speed TPU and the thinnest ones worked best. I included the thicker ones for softer durometer plastics.
Print instructions Print in PLA The multi-color effect can be easily achieved even on single-color printers. Just print the logo first, change the filament, and print the cover “on top” of the logo. To avoid collisions, the logo and cover…
Inspired by the designs and videos of Daniel Riley of RC-Testflight, our 2-motor airplane is a high-performance model aircraft that is both easy to build and capable of carrying up to 1kg of payload. With a wingspan of 1.5 meters and…
Battery case for your SteelSeries Arctis Nova Pro headset. I only used prusament PLA for this, 15% infill, brim, no supports. Pretty much default settings. Most filament materials should work.
For Kugoo F3 pro max
This mount for the Garmin Varia RCT715 attaches directly to the seat post. Im my case it is for a Wilier 0 SLR, but you can change the profile of the seat post in the attached Fusion 360 file to match your bike (just change the 1st sketch…
TLDR Deshroud mod for the Ventus 3080/3080Ti/3090 in the Cooler Master NR200 case Fan shrouds designed to perfectly fit the Arctic P12 and bridge the gap between the fan and the GPU heatsink The Normal Fan Screws version of the fanshrouds…
Replacement caps for the removable plastic caps on the Steelseries Arctis Nova 7 headset. The magnets that fit in the holes on the bottom side are 10 mm x 5 mm x 2 mm. The logo can be printed in another color and glued inside the logo on…
this model is an adaptor for a garmin varia RCT715 rear tail light and camera to mount to a tubus rack. The spacing on the fastener is 50mm (M5). The design uses brass heat set inserts and M5 fasteners for retention. I use McMaster part…
Inspired by High-efficiency Noctua 120mm fan grill I am using ARCTIC P12 fans for their excellent price to performance for DIY projects and I need a fan grill so my fat fingers / my cables would not end up in the fan blades. I got…
This is a fully detailed model of the German polar research station Neumayer III , operated by the Alfred-Wegener-Institute in Antarctica ( https://www.awi.de/en/expedition/stations/neumayer-station-iii.html ). Built entirely on ice, it…
Many similar out there but waten cutout text insted of embossed so made my own version. Logo from internet rest is self designed… Used bambu slicer to color text.
A simple holder for LED stips supplied in ERCF v2 kits by Fysetc. Works with any vanilla (non-Fysetc) ERCT couplers – both 90° from RC1 and 180° from RC2. If you don't like the couplers provided by Fysetc, or if you already printed all…
A simple case/stand for the Retro Chip Tester Pro from 8-Bit Museum https://8bit-museum.de/sonstiges/hardware-projekte/hardware-projekte-chip-tester-english/ Prints without supports. Securing holes around the perimeter for small…
Update: Added a MEDIUM size which should sit tighter than the large but not give you a headache. After using my Arctis Nova 5 for barely over a year the outer frame snapped when I was taking it off normally. Quite disappointing. Since the…
Bought a steelseries arctis pro wireless headsett wich comes with a bluetooth hub that needed some upgrades. Print x1 Hub Print x2 Feet Glue the feets on the bottom of the hub. Feets are taken from kafka who made a remix from Subsite
A quick modification in CAD to use the Fystec LED PCB they include with their ERCF V2 kits on the 180 coupler for anyone (like me) that wants to load their filament from the rear rather than the bottom. Included is a STEP file incase…
