Counting matching models…
This is an insert for the Star Wars Rebellion boardgame + Rise of the Empire expansion. There is plenty other inserts in thingiverse for this game, but this is why I prefer mine: All pieces are printable in a 210x250 bed. No gluing…
These are some star wars themed coasters I designed. I printed them with a 0.2 mm layer height with ironing enabled in black PLA and finished with acrylic paint and a matte clear coat. These fit a 4" stick on cork backing that I found…
This 3D printable mask is a tribute to the legacy of rebellion, anonymity, and freedom. Inspired by the iconic V for Vendetta film and the Guy Fawkes persona, it captures the spirit of resistance in a beautifully stylized and highly…
The total length of the sword as is 130cm (1300mm). There's a hole going all the way through the interior of the rebellion designed for a 115.8cm (1158mm) support rod of 1cm (10mm) thickness. If you want to go that route, you'll likely…
This insert is based on foam insert by Brian that can be found here: https://www.pubmeeple.com/foam-core-star-wars-rebellion/ My version is adaptation for 3d print and have only few changes. I print it from PLA on 0,2mm layer hight. Model…
This is designed to hold 3x 18650 Li-ion batteries, 3x 110x60mm solar panels, an MPPT solar charge controller, and a LoRa radio for Meshtastic or Meshcore. I've only tested it with an NRF52-based radio (Heltec T114) but it's possible with…
This is an organizer for the board game Star Wars: Rebellion and the expansion Rise of the Empire. It supports sleeved cards, vertical storage, has no lid lift, and the stock cardboard insert can be kept. Print everything once and sort it…
LOTS MORE! DeskBuddys here: DeskBuddy Collection by Me3D | Printables.com 🟠 Rate, like & comment on Printables Recommended Print Settings: • Layer height: 0.16 mm • Line width: ≤ 0.35 mm • Detect thin walls: Enabled • Speed: Slow to…
Two models are made. Dante sword 1 piece - single piece with a reinforced keychain attachment. Dante sword 2 pieces - One model is mirrored, keychain attachments are thinner, but once you glue them together will have enough strength not…
Insert for Star Wars Rebellion game from Fantasy Flight Games There is enough space for the expansion leaders and probably the rest of the components will fit except in the case you use sleeved cards (it will be no space for the empire…
Dante's sword from Devil May Cry 5. Not 100% accurate to in-game model, edited to be easier to handle. Created so that the blade and handle can be removed and substituted with other material (e.g. wood).
Played a game of Rebellion with the expansion Rise of The Empire, as the Empire and lost the game because I totally forgot about a target marker from the Rebel player. I realized that the marker is quite inconspicuous on particular…
Star Wars Rebellion and Rise of the Empire expansion organizer. All fit in original game box, tightly packed so that pieces are secure. Leader box comes in two parts due to size, need to be glued together, same with the two dice boxes.…
Perfect compliments to your Death Star's or Secret Base's wet bar.
Sur l'idée des équerres d'étagères du thème Mario, j'ai dessiné des versions Star Wars. Voici la version avec l'emblème de l'Alliance Rebelle. Faites vous plaisir ! From the idea of shelves brackets about Mario, I've designed some on the…
After playing with the single slotted mission holders (which are excellent), I took a few minutes to mock up a double slotted holder for when we want to send two leaders on a mission. Works great, easy to print.
Datei einfach slicen und drucken Es handelt sich um einen MMU2s Druck "Happy printing"
I designed this in Fusion 360 and used the Bambu Slicer to paint it. I printed it on the Bambu Lab X1C with a 0.2mm nozzle at 0.10mm Layer Height, Bambu Textured PEI Plate, and Bambu White PLA and Bambu Black PLA Matte. I haven't tested…
Simple tray to hold the tokens for Star Wars: Rebellion during play. A lid with snug fit is included for storage. EDIT May 25th : Cleaned up and uploaded the OpenSCAD source code. Print Settings Printer: Mini Kossel Rafts: No Supports: No…
The medium mech from the VR game Iron Rebellion. I recommend printing each half on its side.
Free feeder print for anyone who has a cat that needs one. Updated for longer cats
It is one of my best-looking models and can be a prop or a toy you should print it in two parts or use supports
Organizer for GMT Games' "Red Dust Rebellion". 1st layer, wooden pieces and cards: all wooden pieces (4x faction pieces boxes, EG forces, pawns) 2 deck boxes (events in one, CR and campaign in another) box with spare pieces 2nd layer,…
add space for dice mate and extra cards (the one to print free to play for exemple : https://cdn.svc.asmodee.net/production-libellud/uploads/2022/05/DF_PROMOS_PRINT_FR_22_V2.pdf
Hey Rebels and members of the Alliance! Show your hope for the galaxy with this Rebel Alliance "Starbird" insignia woggle. The perfect accessory to declare your loyalty while keeping your neckerchief in place. This model is designed for a…
🟥 Parfait pour l’impression FDM en couleur ou en mode monochrome, ce modèle nécessite peu de supports. Faire attention en retirant les supports sur les parties fragiles. Crête iroquoise, perfecto clouté et regard qui dit « touche pas à…
If something in here is janky, it's because I learned fusion to do this project. Constructive feedback is welcome. The six individual step files are included. Each body piece is made of a body for each color. This can cause some visible…
Rebellion Insignia keychain, I provided two models for two different keyring attachments. If any other layout for the keychain hole would be better let me know! More than happy to make modifications if needed The original models are much…
📝 Description du modèle 3D 📝 (FR) : Cette figurine 3D représente un personnage au style rebelle et dynamique, inspiré des univers de jeux vidéo ou de dessins animés. Avec ses traits anguleux, sa coiffure stylisée en pointe et son…
PLS FOLOW ME I DON'T MAKE THIS COS IM BORD ITS FOR ME TO MAKE MORE PEOPLE HAPPY
Porta chiavi di star wars due modelli uno con il simbolo dell'impero l'altro con il simbolo della ribellione Stampati con PLA nozzle 220° plate 50°
DIY illuminated mirror with the StarWars rebellion logo. BOM ESP8266 or ESP32 USB A to Micro USB B cable Silver/Mirror foil Some foil with a blur effect LED cables (most will do) Solder iron Hot Glue WS2812B See supported LEDs:…
I designed an easy tap handle to hold the Empire and Rebellion Coasters by IVIUPPET https://www.thingiverse.com/thing:819128 Print with the back on the build plate with minimal supports. Threaded portion is 3/8-16(standard US tap…
I designed replacements for the attachment rings from the Star Wars: Rebellion expansion, “Rise of the Empire.”
Support téléphone alliance rebelle Dimension : Largeur 110 mm Hauteur 112 mm Profondeur 157 mm
Spring Spacer/Adapters that allow the Rebelle 4Victory to install Hammershot upgrade springs. The 4Victory is a less common blaster, so it has fewer options for springs versus the popular Hammershot. Two spacers, one for each end of the…
Replacement Grip for nerf Rebelle Messenger Comfortable replacement for the skeletal cheesegrater grip slightly larger and set farther back to fit older hands hardware needed: 2x 5x20mm bolt, head diameter less than 10mm. head height less…
Rebelle Secret Shot (purse blaster) Grip extension. fills in the sling mount cutouts on the grip, so you have slightly more to hold. Still allows the blaster to fold up into purse form. Metric Hardware Required: m5x25mm bolt, with a head…
You know when you want to fix your hair but with drama, power, and a hint of medieval menace ? Meet Darkfang , the gothic sword comb nobody asked for… but everyone will respect (or mildly fear). It doesn’t cut. It doesn’t stab. But it…
This is an extra divider for the board game Coup Rebellion G54, as the set comes with few spacers. Category: Games
This is a modified version of @chouchou_348970 Iphone 13 Pro case with the Star Wars rebelion logo.
this is a box for the board game coup: rebellion. It is also my first self designed print so i would love some feedback.
Experimental 'choked' barrel for the Rebelle Messenger the concept is to have a relatively loose fit around the dart for the majority of the barrel. but a tighter sealing choke section at the front. This should have similar benefits of a…
A compact insert that drops into your Horizon Forbidden West: Seeds of Rebellion box, replacing the two small cardboard trays. The main tray’s lid doubles as the game’s threat track, with recessed slots sized for standard 8mm cubes. Keeps…
I modified the CoreBell bottom piece to use 3d printed stand offs and heat set inserts to mount the radio and solar charge controller instead of zip ties. Also added an on/off switch that turns off the radio while letting the solar charge…
Modded my Guardian by cutting off the stock and bow, followed by filling in the holes. Wanted something nice for the front grip, though. the hardware i used is brass spacers and some screws. Screws: M3 x 12mm button head socket cap…
Pretty basic cake topper or reuse for decorations of another kind.
45 lbs Weight Plate Keychain & Can Open er Bring the gym to your keys—and keep a handy pop-tab opener ready at all times! This model is a detailed mini replica of a classic 45 lbs / 20.4 kg Olympic weight plate that doubles as a…
A Seafoam Manufacturing design from Seafood.
Support the rebellion with this minature lightbox! A wide base and keyhole allow it to be hung or stand up on its own.
The only thing i could find that was bad about it is the apple logo doesn't show to the stem.(Tested works with PETG) And this is a remix of the model at this link https://www.printables.com/model/328286-iphone-13-case thanks to the…
Upcycled Storage: True Fruits Bottle Cap (Star Wars Rebellion Edition) Turn your empty glass smoothie bottles into useful storage containers! This cap is designed specifically for "True Fruits" bottles and features the Star Wars Rebellion…
Snow Bike accessory compatible w/ Battle of Hoth or Rebellion. Penny shown for size.
Starship and Vehicle compatible with Rebellion and Battle of Hoth. Add a new faction to the battle with a circle shaped starship and a tank. Image includes penny for size, self painted one of the starships and the tank. Printed using Qidi…
Always wanted to replace the front grip after modding my Guardian. This version is a minimized version. It has a picatinny rail, but works without any mount. NICE! the hardware i used is a brass spacer and some screws. Screws: M3 x 12mm…
Combo files has rebell mammorna on one face & Palestine flag on otherside.
3D printable Rebel Alliance logo (Star Wars). This design can be scaled to any size in your slicer. Printed flat with low infill (approx. 5%) to save material and time. Use it as a wall sign, desk decoration, or a personalized gift.…
Detailed 3D printable Chess Piece Pawn Rebellion figurine, ready to print on FDM in PLA. Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon license:…
Extinction Rebellion logo. Combo files has extinction rebellion on one face & Palestine flag on otherside.
Dieser Standfuß wurde passgenau für die Hasso Box Travel Shisha (KC Rebell) entworfen. Die Sisha wird einfach lose in die dafür vorgesehene Aussparung gestellt. Ein zweites Loch nimmt die Shisha auf und fixiert sie so, dass sie auch…
Extinction Rebellion logo. Combo files has extinction rebellion on one face & Palestine flag on otherside.
Combo files has rebell mammorna on one face & Palestine flag on otherside.
Free feeder print for anyone who has a cat that needs one. Updated for longer cats
✨ Free DXF vector file — minimalist circular silhouette with an edgy, rebellious gesture. Clean lines optimized for crisp laser cutting without fragile bridges. 📐 File specs: • Format: DXF (vector lines, 0.1 mm width) • Units: millimeters…
You know when you want to fix your hair but with drama, power, and a hint of medieval menace ? Meet Darkfang , the gothic sword comb nobody asked for… but everyone will respect (or mildly fear). It doesn’t cut. It doesn’t stab. But it…
The total length of the sword as is 130cm (1300mm). There's a hole going all the way through the interior of the rebellion designed for a 115.8cm (1158mm) support rod of 1cm (10mm) thickness. If you want to go that route, you'll likely…
☕ Star Wars Rebel Coffee Cup Lid – Join the Rebellion with Every Sip Fly your colors with pride and start your day like a true member of the Rebellion. This Rebel Alliance–themed coffee cup lid features the iconic starbird insignia,…
This is a digital 3D printable model of Dante’s iconic Rebellion sword from the Devil May Cry anime. (Netflix series.) The download contains : - STL cut to fit 200 mm print bed - Whole assembled OBJ file All cut parts are placed on the…
The best Rebellion 3D model you’ll find on the internet! For the most epic Dante cosplay ever! - Accurate to the source material - Fully tested - Print ready and oriented optimally All 3D models in this shop are made by a propmaker. I…
Relive the glorious exploits of the Rebellion with this fun chess set! Heights King: 80mm Queen: 75mm Bishop, Knight, Rook: 60mm Pawn: 50mm For Commercial Licensing and Exclusive Sets, join me on Patreon: patreon.com/ChessMasters
A new Star Wars inspired piece has joined the collection. This design reimagines the Rebel Alliance symbol as something fractured yet alive. The clean, iconic crest dissolves into a cascading fleet, ending in the iconic Millennium Falcon.…
This is a digital STL file – print-ready and high quality. A life-size fan art recreation of Rebellion , Dante’s iconic sword from Devil May Cry . Sculpted entirely from scratch, this version captures accurate proportions, silhouette, and…
A map for the STAR WARS Rebellion board game that allows the Imperial player to keep track of the planets already excluded in the search for the Rebel base. German: Eine Karte für das Brettspiel STAR WARS Rebellion, mit dem der Imperiale…
