Counting matching models…
If you want to use an automatic floor register, follow these instructions: Find 3D-Printed RC cars here.
Print approx. €3.53–€4.32 excl. taxPreliminary estimate for one variant
A air redirection hood for a floor-installed register. The register drops into the hood. Register dimensions supported: Above floor: 13.5" x 3.75" Duct opening: 12" x 2.25" Two options available… single piece for large print volumes.…
Print approx. €21.59–€26.38 excl. taxPreliminary estimate for one variant
This vent cover is for a 4" thin wall pvc (sewer pipe) used as an airduct. (NOTE!! This will not fit schedule 40 PVC unless you modify the size of the file when slicing!) It will also fit sheet metal duct if you use the crimped end of the…
Print approx. €8.50–€10.39 excl. taxPreliminary estimate for one variant
This is a simple 2 piece, easy to use mold housing for dice, but you can use it for anything you want. It has to pieces which you can attach together with clamps or clips, then fill with silicone over the dice. I use Cricut Transfer Tape…
Print approx. €3.68–€4.50 excl. taxPreliminary estimate for one variant
Find 3D-Printed RC cars here.
Print approx. €0.36–€0.45 excl. taxPreliminary estimate for one variant
There are two versions, one with a ripple bottom so that the cards do not fall down if there are only a few cards left in the biggest register (the other one has a flat bottom). How to use the "Lernkartei" Buy DIN A8 cards (74mm x 53mm,…
Print approx. €4.94–€6.04 excl. taxPreliminary estimate for one variant
Motorcycle license plate holder for Spanish plate Materials: 4x insert M4 4X screw M4 x 10 2X insert M3 2X screw M3 x 20 2 pins Ø 3mm
Print approx. €1.59–€1.95 excl. taxPreliminary estimate for PETGSource material: PET
I printed two pieces at once for the front and rear of the car. ASA filament nozzle ∅0.4 temp. 245°C 105°C table without chamber I'll add a few more remixes for other European countries
Printed it with ABS 100% infill. Assembly will be tricky. You'll have to drill a mounting hole to green coin funnel to install the M6 nut. I used a nylon lock nut, so that it doesn't tighten up too much when income gets big =). It helps,…
name for the bouncer printed by PETG Layers 0.2mm total height 1.2mm filament replacement after 3 layers added small cleaning tower, prints the first small square when changing the filament. text editable in Prusa Slicer
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for PETGSource material: PET
My make of the Spider robot(quad robot, quadruped)-SG90 by regishsu using an arduino nano and servo shield with 2x 18650 batteries.
Pins and Tabs used for registration of multi-color relief prints. Print at least two Pins and then as many tabs as you need to do a print run. When printed the tabs should fit tight into the pins. This is by design. Depending on your…
A customizable keyring in the style of a EU/UK/GB number plate. These are perfect for labelling your keys, bag and other personal belongings. Use your slicer's 'pause at height' or 'filament change' feature to create multicolored keyrings…
Cash register sized for Sylvanian Families or Playmobil. The cash drawer is a separate part and it's possible to place at least 4 coins in the drawer. The coins are a bit oversized compared to the cash register but otherwise they would be…
Customisable name tag or registration plate keyring. Simply customise, print and attach to your car keys and never worry about remembering your reg, or which keys to pick up, again. I'm fairly experienced in SolidWorks, but new to…
Keychain with registration number, you can edit number with Fusion 360 You can add your text in PrusaSlicer
Hi everyone! Please find a Ternes Burton Registartion Pin and print paper Tab for the traditional printmaking technique of linocut and in particular the registration of your paper when printing. An example of these in use is provided by…
Coins with values 5, 10 and 25.
Just my design of a Vehicle registration Case (or in Germany "Fahrzeugschein-Schutzhülle"). It fits for the german "Zulassungsbescheinigung/Fahrzeugschein".
We've had this toy for many years and our kids loved it. It came with 6 coins (2 of each color) but most were lost over the years. Now the grand kids love it as well so it's time to make it whole again. Took some sizing and tweaks but now…
A simple, low profile cover for a ceiling mounted HVAC register. Fusion 360 file (.f3d) provided so you can adjust parameters if required for your specific register. Model prints in two pieces if you only need one side; two pieces also…
Used to lock the registration plate in place, can be customized with the text of your choice. The list itself is 450mm so I cut it in two parts with a dovetail connector in the middle so it can be printed diagonally across most build…
This is a remix of Micahol's Sea of Thieves gunpowder barrel. I've chopped it up for easier printing - you need 2x of Side.stl & 2x Pin.stl to make for easier alignment while gluing, and one of everything else. Stencil.stl is a thin…
A replacement vent register, fixed (non-adjustible) Outside dimensions: 340x140 Insert dimensions: 300*100 includes: one full size model (hex pattern) one model with one side cut down because i had vent against a cupboard (hex pattern)…
L Bracket with adjustment slot - Collection - Staffa a L con asolatura di registro Dimensions: 20mm 30mm 40mm 20x25x25mm 30x25x25mm 40x25x25mm 20x35x35mm 30x35x35mm 40x35x35mm 20x45x45mm 30x45x45mm 40x35x35mm 20x55x55mm 30x55x55mm…
To help you store and organize your cards for studying.
A dollhouse (1:12) sized tablet based cash register / point of sale credit card terminal. The table is based on an Ipad pro, but thickened 4x so as to not be too fragile. If you have a really well dialed in printer, the bottom may be able…
This model is designed for all strollers with a wheel shaft diameter of 19 mm. For other dimensions, just print the holders in a different scale. Print all 3D parts. Print the PDF file, or edit SVG file for your own text. Cut out the text…
Give your kids car a new look! I designed these license plates using Fusion 360 to use with MMU Fits It fits for Kids Lamborghini Aventador SVJ register plate space - 13,3x3,8 cm But some other models should have the same size Remix…
nastavení výměny barev při výšce vrstvy 0.2mm do 1mm bílá barva od 1.2mm do 1.6mm modrá barva 1.8mm černá
This adapter is necessary for attaching the Russian registration number to the standard mounting locations of Chinese cars. Print only with UV-resistant plastics (PETG ASA). 3 perimeters and 15% fill. M5 nuts. I recommend treating them…
So the A/C in my room has been underperforming for a while. The register is the furthest it can possibly be from the furnace/blower, and it's the last one in the duct system. I wasn't about to spend $30-$100 on a register booster when I…
I made this fan duct / register box for the QiDI X-Max printer to use in my review video: I am not going to drill holes to fix it, just use double-sided tape to seal the egdes. Category: 3D Printer Parts
king Regis staff from Final Fantasy 15 , prop is 1;1 scale happy printing :D wanna see what is I'm working on next? or if you guys wanna vote on what I'm gonna make next? keep an eye out on my social media :D…
I just added a Tesla Logo on the awesome design from Fahrzeugschein Schutzhülle / Vehicle registration Case von vonrotbart | Kostenloses STL-Modell herunterladen | Printables.com If you want another car brand logo on the case, please let…
Onkarkitekt presents a customisable Parametric EU/UK/GB Vehicle Registration Number Plate Fusion 360 file for custom 3 Dimensional registration plates
i made a new moldbox design with registration all around to ensure a good tight fit of the two part silicone mold. tolerance is very tight so you need less time patching up the seal. i printed mine in PLA, PETG also works. have fun…
Registration Jig for Linocut Printing 2 Types -Flat jig w/ grip nubs on bottom -Stepped jig sans grip nubs
This vent will fit in an opening 220mm x 156mm ( approx. 8.5" x 6" ). We designed this based on a specific need, so it is an unconventional size. A 19mm flange surrounds the vent opening. it is 20mm deep. Since This vent was designed for…
Chalupas y Registros Eléctricos 3D Modelos listos para impresión 3D, ideales para prácticas de instalaciones eléctricas o proyectos reales. Diseñados para ofrecer resistencia y durabilidad, manteniendo medidas estándar para facilitar su…
You can now print more coins for the famous toy cash register. My kid lost a few coins and was very happy to get a personalized coin with a Letter :) Customize to select a letter you like and print the coin. To do that, please install…
These coins are intended for the Fisher Price cash register, item number 2073. This specific version of the toy uses the same size coin for all denominations, with the colors red (5), green (10) and blue (25). The model is made to be both…
This paper pad uses 2 ¼" wide rolls of paper register tape. Just flex the ears apart to load the paper roll then tuck it under the hold-down bars to hold it flat. The lower hold-down also doubles as a tear-off guide. I've included two…
Ein Karteikartenregister für DIN A8 Karten. Hier die passenden Trennwände : https://www.printables.com/de/model/727450-karteikartenregisterreiter Inspiriert duch dieses Model :…
Here's a 6x12 passive wall register I designed and printed while adding some ventilation to the 2nd floor. For a passive register PLA will work fine. If you would like to use this as an active vent register i would suggest using PETG as…
Simple label for hanging file folders. Since writing on 3D prints can be quite challenging, you can put labelprinter labels on it Benamungsschilder für Hängeregister. Da es schwer sein kann auf 3D gedruckten Objekten zu schreiben, kann…
To edit the register plate number and country code texts you need to have free Onshape account Follow the guide.pdf file to edit the texts in the keychain
Customizable Number plate keyrings can be changed in fusion 360 under sketch 11 They use the official UK Number Plate Font charles wright you can find it here : https://www.dafont.com/charles-wright.font I printed mine on my Bambu Labs…
For the Arm and Lower Leg pieces, print two of each, then mirror the part and print two more each. Most slicer software should have that option available. The parts should print well in the orientation here, but do require supports for…
Trennwände für https://www.printables.com/de/model/727434-kaerteikartenregister-din-a8
This is an STL for a set of matching mold locks to help align your mold halves for sand casting. They are about 60 x 75 mm. I print one for each side of the mold and screw it in. Category: R/C Vehicles
Das Spielen von Turing Machine erfordert ein gewisses Micro-Management mit den Filter-Karten und den Verifizierungskarten. Zur Vereinfachung des Wieder-Einsortierens nach dem Lösen eines Rätsels eignen sich diese Register-Karten. Die Idee…
I got an hint from an user: Print it with a fine nozzle. I printed 512 pieces with a 0.2(5) mm nozzle and it fit every time while a 0.4mm nozzle can cause the hinge to no longer fit . Thanks John!
Register plate light cover compatible with many of cars from VW Group (Škoda, Volkswagen, Seat, Audi).
These are replacement coins for the "Learning Journey" kid's cash register. Our dog ate the original coins, and our son was sad. So I made some new ones, and that cheered him right up. Print instructions Category: Toy & Game Accessories
A curtain holdback hood for a floor-installed register. The register drops into the hood. Register dimensions supported: Above floor: 13.5" x 3.75" Duct opening: 12" x 2.25" Two options available… single piece for large print volumes.…
A simple registration jig for printmaking with customizable dimensions Customizer Instructions Download configurator.zip and extract it Open configurator.html in the extracted folder Change parameters as desired Click the download STL (or…
Preprost etui za boljšo zaščito prometnega dovoljenja. Simple case for additional protection of vehicle papers. Print on the long thin side with a brim for stability. PETG, ABS or another high-temperature material is necessary for it to…
Tapa para registro eléctrico o telefónico. 60mm entre tornillos, 80mm de ancho.
Not a big thing. Just another Utility box which I designed to my needs. Maybe you may need it too? Box with up to three separators, which gives you way more variable arrangements of sizes. A lid fitting on top. Stackable with indents.…
As I've found the official ec-stencil-fix from #eurocircuits too clunky for small boards I made my own version. This works without problem with Aislers ( https://aisler.net ) rapid registration process. If you don't know that rapid…
In my basement office, the ceiling register is right above my desk. In the summer months when the air conditioner is working to cool the rest of the house, despite being closeable, the vent still produces a chilling draft. This cover is…
Boost fans for my home's 12 x 2-inch floor registers are not commercially available. This works well for boosting circulation at the ends of my HVAC runs. Once the passive register is removed, the booster assembly fits snugly into the…
The set consists of: Box bottom Box lid Spacer to insert into the bottom side 9 blank index cards for self-labeling 26 index cards with the letters of the alphabet The box is designed for DIN A8 sheets (52 mm x 74 mm). The outer…
The "Camera holder" should be printed in two parts (no supports required). Then glue or use injection nut (M3, thin) and flat head M3 screw . Use M3 screw to mount the camera "gasket" should be printed from FLEX filament. Should install…
Criei esse arquivo para poder fechar um registro que não tinha manopla. o encaixe ficou bem firme, mas foi o que esperava e deu certo. Gostou do projeto? Aceito doações
I'm installing a whole house ventilation system and needed 6" duct grilles for my intake and exhaust. A 6" flex duct should easily slip over and attach, and a crimped end of a solid metal pipe should easily slip in. I like the look of…
The cover is 8x4. The trim ring makes the outside dimensions 10x6. Magnet inserts are for 4mm
This is 3 models, one for each coin that comes with the kids toy Fisher Price Cash Register. We received this as a hand-me-down and it only had 3 coins. ** This design is for the cash register that has 3 of the same size coins ** I…
This box is my improved version of the first model ( Link ). The sheets are slightly reinforced and are fixed in the box. The letters are now integrated. I needed an additional compartment in the back for storage.
The goal here is the same as the original however i found that the parts i had when testing the original didnt work quite as i had wished. One concern i had was waterproofing- this led med to design a clip style close to the original that…
it's 2 cash drawers dividers for IKEA DUKTIG cash register. step files and fusion 360 files are in files section Print instructions Category: Toy & Game Accessories Summary it's 2 cash drawers dividers for IKEA DUKTIG cash register. step…
I designed these 3x6 passive wall registers to add a decorative touch to any passive wall vent. I printed these in PLA and they're pretty sturdy but would only use these for passive holes that aren't exposed to heat or stress from being…
HVAC Basic Design Register/Vent This register is an easy print for replacing your register/vent. ✅ What it does Replaces old dirty registers with one you print in any color you want Provides 4 way airflow Saves money so you don't have to…
We explore how 3D printing was pivotal in creating a coin collector specifically for vending machines. The enclosure for this device — which holds a coin acceptor, an LCD screen, and a control board — was entirely crafted and produced…
This is a simple plate to put an atv registration sticker on an atv, without putting it on the plastics. Made to be attached anywhere with zip ties. I got sick of putting sticking my registration to my plastics, and after adding storage I…
Binder Divider for European Binder Systems with 2 or 4 rings. Add your own texts easily in Prusaslicer! There are different sizes, which are compatible with each other, so you can use smaller and bigger labels together if needed. Adding…
Sleeve to protect documents. I designed this sleeve to be specifically for Polish car registration documents (73 x 105mm) but feel free to scale it to fit your needs. TPU works best. The two part need to be glued together, for that I've…
This was printed as a prototype before sending off the design to a laser metal cutting shop. The prototype is fully functional, but needs to be glued where it would be welded when made from metal. The metal version is strong enough…
Clutch Cable Bracket Adjuster / Pulley Bracket / Mounting Bracket - Staffa registro frizione 25x17.50x6mm Guide pass-through hole inner Ø 7mm 2 Slot for M4 Fixing Screw Resize to adjust dimension If you download/enjoyed this file, please…
size: 57X42mm tooth length 7 mm needs some fine tuning but overall does the job
A very interesting stand for photos of Polaroid cameras in the form of a cash register. This model also has a special compartment for storing photos and a place for one to display.
Parts: The seed box consists of the main box, lid, lettering and the individual registers. Seed box & lid: The seed box is designed to store the seed packages in a dry and dark place. Register (optional): To sort the seeds packages there…
We removed our kitchen suspended ceiling and exposed a four inch round heating duct. Rather than spend $12.00+ to buy a register, I designed one in FreeCAD. According to PRUSA slicer I spent $1.29 in filament.
I noticed two screw holes under the front of the Berg go Kart I got our kids and found that one of the things you could attach is a license plate holder. Which means you'd have to buy it from Berg. Didn't want to buy one so I did a…
I recently moved into a house that needed new floor registers. I did not want to buy new ones and wanted to have a unique design. Made in fusion 360. The file has 2 bodies, and the center is used as the part to make the vent. (Standard…
Needed a car rego pouch / holder so made one. Use small strips of badge tape along the three edges to stick it to the window (stick the tape on then trim with a craft knife). Fits New Zealand standard vehicle registration label ( NZTA…
Use Case I have a closet between two rooms which has a mini-split heat pump installed and 4 smart vents - one near the ceiling and floor for each room to distribute warm/cool air. The vents themselves don't do much to let air through, so…
Recommended print settings PLA Nozzle: 0.4 Layers: 0.25 Infill: between 25% Perimeters: 3 Bottom/Top Layers: 4-5 SUPPORTS NOT NEEDED UPDATE - 01.01.2026 Ich habe das Loch in der Mitte der "register base plate" entfernt da dies zum…
I made new register switches for this accordion. One was completely broken, so I modeled them after the good one. The mounting bracket screwed right onto it. I printed at 100%. That was probably unnecessary, but I did it for the weight…
We have been doing some changes to our entry hall and found that there was no cover on a electric register box. I've been searching through internet and all the covers that I've found, I thought that were too expensive, so I've cloned a…
I printed it from PETG, 0.16 layer height, 3 perimeters, concentric infill. The tall column (the spring post) needs time to cool between layers, so, to achieve optimal results, consider printing 2 or more pieces simultaneously. Print…
Holds Insurance and Registration. Fits Under seat in OEM location. Should stay in place with or without the rubberband.
I designed these 3x6 passive wall registers to add a decorative touch to any passive wall vent. I printed these in PLA and they're pretty sturdy but would only use these for passive holes that aren't exposed to heat or stress from being…
