Counting matching models…
Use-case This geared self-clamping and self-releasing hook is ideal to hold towels that have no hanger (or have an owner that is too lazy to use hangers). To hang up the towel, simply touch the lower lever slightly from the bottom and it…
Print approx. €2.25–€2.75 excl. taxPreliminary estimate for one variant
Hi! This collection of Root 3D buildings and tokens was put together by myself in order to have a nice print-at-home alternative to the popular MeepleSource Root pieces . Almost very single piece in this collection is set to be able to be…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
Quick Release Buckle Clip (backpack & belt Clip)
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
This is Minifigure of "Tomislaw Apoloniusz Curus Bachleda Farrell". A famous Kurvinox character from legendary "Kapitan Bomba" show made by Bartosz Walaszek. You have two ways of printing it: You can print it as parts and glue them…
Print approx. €3.60–€4.40 excl. taxPreliminary estimate for one variant
Drill Bit Sharpener for Dremel with true Relief Angle. This jig is using a Dremel Cutting Disk for Sharpening. The 2 Parts are held together with a M3 Screw and Nut.
🚀 This is NOT a typical moon lamp 👉 You don’t just see the Moon — you feel it. 🌕 Moon Lamp – High-Relief NASA Edition (Ultra-Detailed Terrain - also visible without light ) with Mechanical Dimmer 🤯 Most 3D printed moon lamps rely on…
Update 24.06.2026 Released the F3D and STEP files of the entire assembly Added a compact backplate (50mm wide) 1. Introduction I needed a sturdy and reliable design to remove the Monitor stand from a 24"-ish Monitor, intended for use in a…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for PETGSource material: PET
!!! Quick Side-Release Strap Buckle !!! 2:30 Print time (Can surely be optimized) Max. strap width 27mm I recommend printing in PETG It sure does what a Strap Buckle do. Feel free to do anything with my precious Quick Side-Release Strap…
Print approx. €1.80–€2.20 excl. taxPreliminary estimate for PETGSource material: PET
I liked the idea behind this model , but wanted a more sturdy construction that did not involve glue (am not a patient man). So, with a bit of Fusion 360 work, here's this nice trellis that can grow as needed. No glue required, but pieces…
Print approx. €1.04–€1.27 excl. taxPreliminary estimate for one variant
N scale oil barrel for model train use decor
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
Suggested print settings: Layer height 0.2mm. Infill 50%. Perimeters: 5 (for strength). No supports needed. More durable when printed using PETG. Assembly The components fit together using a friction-fit mechanism. Push the "Lock" piece…
Print approx. €0.67–€0.81 excl. taxPreliminary estimate for one variant
This is another mask-ear-strain reliever. I initially designed and printed these for a good friend and am now making them for anyone who wants them (as well as sharing them here). The Celtic Sailor's Knot has special significance to me…
Print approx. €2.92–€3.57 excl. taxPreliminary estimate for one variant
This is a remake of the ubiquitous Barrel, on a diamond plate pallet. Four models, with four through one barrels on a diamond plate pallet. Perfect for use as cargo, terrain, objective marks, as a load on your train, in a diorama or…
Print approx. €5.81–€7.10 excl. taxPreliminary estimate for one variant
Update 2024-05-15: There is a new version that includes two side ramps for additional rainwater collection. It's available for the 2"x3" and 2 5/8" × 2 5/8" sizes so far. Update 2025-03-04: Added a “bare” outlet adapter to use as a base…
🇮🇪 Fáilte go hÉirinn! ☘ Welcome to Ireland! This model was created by Dany Sánchez . The Rock of Cashel (Irish: Carraig Phádraig ), also known as Cashel of the Kings and St. Patrick's Rock , is a historical site located at Cashel, County…
Print approx. €2.89–€3.54 excl. taxPreliminary estimate for one variant
Anneaux de relaxation: Très bon moyen de se relaxer et se détendre… les deux anneaux tournent sur eux-mêmes dans tous les sens, mais restent dans leurs logements respectifs… sauf si vous forcer bien sûr… ❗Attention pour la couture à…
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for one variant
Modell train rail buffer for scale H0 1:87. Works on Märklin C-Gleis. It should also work on ather main manufactured H0 rails, like Fleischmann, Piko, Roco Settings Value Infill 15% Perimeters 2 Layer Height 0.2 mm Material PETG (PLA)…
Hello guys, retriever figure. Good puppy. Enjoy the print!
Print approx. €6.78–€8.28 excl. taxPreliminary estimate for one variant
If you own several cameras you don't want the hassle of mounting your plate any time you change cameras. Print as many as you need! This plate also works great with my phone frame. Use two M4 bolts to attach it. You will have a phone with…
Print approx. €0.78–€0.96 excl. taxPreliminary estimate for one variant
It's a buckle with quick side opening and with Pin-Lock or Ladder-Lock for 24mm wide straps. The predecessor model uses an M3 screw as a pin and an M3 nut as a mating thread Replacement Buckle for 24mm wide loop Strap with M3 screw as a…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
Burney Relief - Queen of the Night Ishtar/Inanna The restored Burney Relief shows color theme of red, white, black, and gold. There’s a naked, fully red-skinned woman, holding a golden loop rod in each hand. Her wings are red, white, and…
Print approx. €8.04–€9.83 excl. taxPreliminary estimate for PETGSource material: PET
Om dat mijn zoon last heeft van de Aziatische hoornaar liet hij mij een Aziatische hoornaars val zien met wat uitleg. Zo ben ik dan begonnen met te tekenen, en printen. De val kan maar begin volgend jaar getest worden. De aanvallen…
Bob's Birders This exists because one day I imagined Teddy from Bob's Burgers as a squirrel, sitting on his stool at the restaurant. We have a couple bird feeders around our yard, but they seem to taunt the crows, jays, and squirrels who…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
edit: There is an improved version designed for PETG now. If you own the headset, you probably already know the original headband is very prone to cracking. There is already rudimentary replacement part out there but I wanted nice,…
Print approx. €3.65–€4.46 excl. taxPreliminary estimate for one variant
Lionel Messi Bas Relief. Testing out Flux + TiledZoeDepth. Flux is nice because there is a lot less need for multiple batches to achieve desired results while using Forge (Stable Diffusion) As long as your description is tight you are…
Print approx. €6.01–€7.35 excl. taxPreliminary estimate for one variant
Esta es una réplica 3D de la estrella de mar que se volvió viral tras el stream en vivo del CONICET junto al Schmidt Ocean Institute , durante la expedición al Cañón de Mar del Plata , en el Mar Argentino. Apodada por internet como…
Print approx. €0.64–€0.79 excl. taxPreliminary estimate for one variant
The original ModMic base clasp is under constant stress and can breakdown quite quickly. Here is a replacement part. It is almost like the original, but with minor tweaks for 3D-printing. I use this for my ModMic Wireless, and it works…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
JERRARI3D.com The GEN2 Hex Bit (2 Inch) Drawer Inserts are designed to fit the GEN2 Grid Drawers to holds them securely in place, but these are also designed to fit in any standard GEN2 lack drawer as well. They can be mixed and matched…
Easy to make cute Squirrel keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
The inner bracket ring of the lampshade measures 40mm, which should be compatible with most standard hanging E26 light bulb sockets. The lampshade measures roughly 150mm in diameter and 175mm tall. This should print perfectly without…
Print approx. €10.37–€12.68 excl. taxPreliminary estimate for one variant
Prusa MK4 feet's V2 Changelog increased stability and contact surface 100% infill to reduce springing and transmission selects Print settings material: Prusament PETG layer height: 0.2mm infill: 100% V1 Print settings material: Prusament…
Nozzle 0,4mm Material PLA Resolution 1,6mm Firs layer height 0,2mm Infill 20% Model dimensions 112.56x211.66x14.73mm
Print approx. €12.56–€15.35 excl. taxPreliminary estimate for one variant
I started with drilling a hole in the side of my rain barrel to allow drainage, but I needed to put a screen over it to keep the bees out. So instead, I made this bung so I could put a screen fitting in place instead. Since then, I've…
Print approx. €8.12–€9.93 excl. taxPreliminary estimate for PETGSource material: PET
Saint Scholastica : Bas-Relief : two versions. The version on the left seems to need some widening while the version on the right could use some tightening up. I was experimenting with some detail manipulation and noticed the distortion…
Print approx. €10.77–€13.16 excl. taxPreliminary estimate for one variant
A must-have tool to help you conveniently pickup the various metal objects in your work space, and then easily drop them where they belong via the quick release handle (can also be used as a “transfer magnet”) . All parts are designed to…
Easy print. The two halves must be glued together. I used KrazyGlue and it worked fine. A couple of skewers made the legs. No special settings needed; I used 10% infill but I think you can use whatever you want. I added the black details…
Print approx. €1.04–€1.27 excl. taxPreliminary estimate for one variant
Mon frère voulait ce masque mais ne le trouvant pas sur le net, je l'ai dessiné! J'espère qu'il vous plaira! J'ai essayé d'être aussi fidèle que possible. Pour ce qui concerne la taille, un rapport d'échelle vous permettra d'être le plus…
Print approx. €2.08–€2.54 excl. taxPreliminary estimate for PETGSource material: PET
Sargon II was a prominent king of the Neo-Assyrian Empire who reigned from 722 to 705 BC. He is considered one of Assyria's most successful rulers, known for his military prowess, administrative reforms, and ambitious building projects.…
Bigger Trellis prints just under 2 Hrs. or smaller in 1.5 Hr printed trellis
Print approx. €1.09–€1.34 excl. taxPreliminary estimate for PETGSource material: PET
A bolt-on quick-release mount for the Cygolite Dash bike light to replace the stock rubber strap that would not keep the light in place. Trail approved! One-handed quick-release! Minimal footprint! Easy installation without removing…
Print approx. €1.17–€1.43 excl. taxPreliminary estimate for PETGSource material: PET
The mechanical emergency door release on the cybertruck is hidden under a rubber insert in the door pocket. This makes it very unlikely to be found should an accident render the electronics unresponsive which could be deadly. This model…
Print approx. €7.93–€9.70 excl. taxPreliminary estimate for PETGSource material: PET
Este barril es un excelente adorno para tu escritorio, es el logo de la empresa John Deere. Se imprime sin soportes.
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
I modified Lorenzo Gonzalez's lovely Reloading Die Organizer to work better with my pegboard, plus a couple other minor improvements: Changed the hole spacing to 8", to match US/Canada standard peg board (Lorenzo has a version like this…
Print approx. €5.36–€6.55 excl. taxPreliminary estimate for one variant
The mount is stiffer - the pins that the screen slides onto are still not sized correctly (need to be shorter and wider) so the screen is a bit loose on the mount. I fixed this quick by putting a few pieces of thin foam tape on the screen…
Print approx. €3.21–€3.93 excl. taxPreliminary estimate for one variant
A very smart way to swap your steering wheel for g29 and g27. it has a hole that is 10 mm to lock the steering wheel into place. Use a pen, screw or anything in that hole. You can also 3D print a pin that is 50 mm long and 10 mm in…
Print approx. €1.10–€1.35 excl. taxPreliminary estimate for one variant
1. Introduction Winter……oops………Hot Summer is Coming ! That's why I bought a portable air conditioner with a 150mm hose. Unfortunately, it is common here in Europe to have “casement windows” (windows with vertical rotation axis) while…
Print approx. €3.08–€3.77 excl. taxPreliminary estimate for PETGSource material: PET
Use tree supports, 25% infill + 3 walls. A compact multi-purpose kitchen tool designed for opening vacuum-sealed jars and glass bottle caps. The curved front section works as a jar vacuum releaser by slightly lifting the lid edge and…
Following the publication of a multi-colored box that was almost impossible to reopen, I had the idea of turning it into a piggy bank. My contribution is just to have modified the model to add a slot on one side. So there are 6 different…
Print approx. €8.78–€10.73 excl. taxPreliminary estimate for one variant
Salacious B. Crumb R.I.P. Mark Dodson, voice of Star Wars: Return Of The Jedi ’s Salacious B. Crumb
Print approx. €5.26–€6.42 excl. taxPreliminary estimate for one variant
Does what it says on the tin. Fast wireless charging (Max 10W). Can print with or without MMU. No electrical knowledge or soldering needed. Screwless design, just glue in the PCB and coil, the 2 halves snap fit together. Works on any Qi…
Print approx. €1.74–€2.12 excl. taxPreliminary estimate for one variant
So the whole idea here was to, rather than have the gutter just be cut and dump all the time into the rain barrel, instead to give me the option to have the water go one way or the other. I fugred a simple flipper flapper doo dad would be…
Print approx. €12.23–€14.95 excl. taxPreliminary estimate for PETGSource material: PET
Update: R2 version has an arrow pointing in the direction to move the tool to reach Neutral (N). This model is a tool to manually release the park pawl on a ZF 9HP transmission, used on 2020 or newer Honda Ridgelines. A ½ inch ball valve…
Print approx. €0.93–€1.13 excl. taxPreliminary estimate for one variant
FEATURES Keep precious cargo from sliding and tumbling around in your trunk or car floor. Great for transporting cakes, pizzas, and other important packages. TIP: Use a color that stands out so they don't get lost in the depths of your…
Boční silueta Hondy Prelude 5G
Found the original design, but needed large quantity in short order with non-screw option. Found 0.2mm speed in mk3s+ triple 25m, dual 18m, single 11m. Normally print entire bed full without issue. Use cheap hairspray for adhesion.…
Phone holder on wireless charger pad for Volkswagen Golf Mk8. Holds iPhone mini on the centre of the charger. Without this holder is iPhone mini too small to stay on right charging position. The most suitable material for printing is…
Print approx. €1.51–€1.85 excl. taxPreliminary estimate for one variant
Dunguaire Castle, Kinvara, Ireland Mavic Scan + Added UV Displacement.
Remix of: GoPro quick release two-part clip by parkis Sigma Mount Piece by ENKI
Print approx. €1.06–€1.29 excl. taxPreliminary estimate for one variant
Hello, Welcome to my profile, full of models and miniatures :-) I have here for you Airsoft Sniper VSR piston and spring pin. I have 2 variants of piston (both work even on stronger springs) And the pin, it is better to put a bearing or a…
Print approx. €3.41–€4.16 excl. taxPreliminary estimate for one variant
A detailed Star Wars inspired bookmark, designed to be super thin with some topographical detail. No page damage, no hassle, just a cool design. The Corellian Corvette (CR90) was a ship commonly used by the Alliance to Restore the…
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for one variant
Don't know where to put your ModMic when you're not using it? This is the print for you! This small holster allows you to hang up your ModMic Wireless anywhere you like. It's intended to be used with another fastener - e.g. velcro, 3M VHB…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant
Hold your wireless adapter cap on the end of the usb to avoid miss placing.
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
Supports: No Infill: 10% Rafts: Doesnt matter
Print approx. €2.62–€3.20 excl. taxPreliminary estimate for one variant
This is a simple model of a bourbon barrel I made for a project for my brother that he did not end up using. Figured someone might find it cute or interesting. I made the barrel itself out of the wood infused PLA cause I thought I might…
Print approx. €0.32–€0.40 excl. taxPreliminary estimate for one variant
Ornamental Barrel for Irish Whiskey Society. Used a cylindrical internal support just to make sure the top layer was supported. Printed in PLA
Print approx. €2.31–€2.82 excl. taxPreliminary estimate for one variant
A doorstop where you don't have to bend down to get it in place or try to position it with your feet. The door glides over it when opening and is released by pressing on the top of the doorstop. Prints in place as one part using a…
Print approx. €1.44–€1.76 excl. taxPreliminary estimate for one variant
Well, it is not a really a "Remix" as I had this modeled long time ago and decided to post it as alternate design of Plug Cover for 12V 2.1x5.5mm with screw terminal by hdiessner - Thingiverse
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
A Mount for Philips Hue wireless motion sensor. Its designed to mount the Hue motion Sensor unter a shelf or ceiling. Extra parts M3 8mm countersink screws and M3 nut.
Disclaimer: I started this project a long time ago and learned a lot about modelling in the meantime. This means that the model isnt as well done as other newer ones, but i still wanted to publish it, in case someone else would like to…
Print approx. €6.16–€7.53 excl. taxPreliminary estimate for one variant
Art Nouveau Bas Relief : 1913
Print approx. €5.82–€7.11 excl. taxPreliminary estimate for one variant
Easily clip/unclip your Glubot glue bottle to a tool wall. Attaches with 2 #6 screws. Printed with PLA and 6 parameter layers. Infill shouldn't matter since there will be none. Did use “organic” supports on 40 degrees overhang, but is…
Print approx. €0.65–€0.79 excl. taxPreliminary estimate for one variant
I wanted a handle with a similar form factor as a condenser microphone, so I could use it with a traditional microphone arm, or to handle it myself while talking to the camera. So I went and remixed one of the models by @365Prints…
TAPA PRECARGA DEL RESORTE CON ESPACIADOR PARA ENDURECER LA COMPRESION SPRING PRELOAD CAP WITH SPACER TO HARDEN COMPRESSION
Print approx. €3.46–€4.23 excl. taxPreliminary estimate for one variant
Assembly instruction: 1: Clean your print so your have this result. 2: Now add https://www.printables.com/model/368639-vrai-piege-a-frelons-original-a-visser-nutella-le , on top. 3: Join them together using filament . or End of Assembly.…
Print approx. €1.82–€2.23 excl. taxPreliminary estimate for one variant
Warning!!!! It is very important to be careful assembling this case. Since it is really slim you can find yourself in trouble fitting the BBB inside the case. My recommendation is to insert first the usb side and after the HDMI side,…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
The official Sovol SV06 strain relief is a great foundation for anyone looking to customize their cable management system, and while it may not fit all individual needs, it's a great starting point for modifications. It's worth noting…
Print approx. €0.21–€0.25 excl. taxPreliminary estimate for one variant
There are some designs available, but not one fitted good enough for me. So I created my own, including a release mechanism, like the original Electrolux parts have. You will need the following to put the model parts together A ballpoint…
Hey everyone, YVR3DPrints here with another model. I use it with my iPhone 13 which works wonders, this allows for rotation on the stand while charging so you can take advantage of StandBy smart display. Printed on PETG, 3 Walls, 5%…
I printed this model out of PLA with a 0.2 mm nozzle. A 0.4 mm might have done the job too. The part fits great, it is very similar to the original. It might also fit other cateye products.
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant
My daughter ordered this nice Luggage Tag with the umbrella corp. from resident evil. I used PETG. Update: Added two new Versions: Japanese Umbrella Corp. : アンブレラ社 Original motion picture movie like logo: UMBRELLA CORPORATION You still…
Just a quick design to hold my heltec board. You can use the 4pc. M2 screws & nuts which come with the board (but a bit longer screws 6-8mm would fit better), so no additional parts are needed.
Print approx. €0.82–€1.00 excl. taxPreliminary estimate for one variant
Toy. Sensory tray for kids.
Print approx. €5.86–€7.16 excl. taxPreliminary estimate for one variant
My kid has a laptop for school this year and wanted a wireless mouse.. I am letting them use my Logitech M557 travel mouse, but I wanted a case for them to use to protect it.. Photos mounted in Fusion360 as a Canvas, some design later,…
Print approx. €3.79–€4.63 excl. taxPreliminary estimate for one variant
Just a little hexagonal barrel for the AAP 01
Wanted to modify another user's design to be more compact and fit my needs. Used for reloading .338 Lapua Magnum Brass
Reloj de pared para los fans de snoopy, utiliza un mecanismo de reloj despertador standard
Print approx. €5.22–€6.38 excl. taxPreliminary estimate for one variant
Strain Relief for the Valve Index connection brick. Designed to save your PCs GPU from damage while using the headset. The adapter is able to slide backwards out of the enclosure. Use M3 Screws and Nuts to screw together the enclosure.
This print elegantly relocates the Ender 3 extruder from behind the x-axis gantry to the front. This makes the extruder easier to access as well as keeping the bowden tube fully in front of the z frame. This way, the bowden tube doesn't…
Print approx. €3.92–€4.79 excl. taxPreliminary estimate for one variant
Welcome to Adudino: (One of) Your Gateway (s) to 3D Models Get exclusive and practical designs. Respecting the copyright policy not only protects intellectual property but also supports the creators and the integrity of the 3D printing…
Print approx. €0.93–€1.14 excl. taxPreliminary estimate for one variant
Star Wars Lost Souls Resistance Bas-Releif. Concept Work. More to come.
Box and DIN rail plug to hold your 3V Relay in a DIN rail.
Print approx. €1.41–€1.73 excl. taxPreliminary estimate for PETGSource material: PET
The Minimalist Sovol SV06 Strain Relief is a great option for those who want a simple cable management of their Sovol SV06 3D printer. This design is smaller than the original and allows for a more streamlined approach to cable…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
Minimalistic stand to store your TB reload knife and secondary mag in your desk drawer or in my case tool trolley for fast access and no rattle while moving. I uploaded bare model but feel free to modify to your needs. Made myself one…
Print approx. €4.38–€5.36 excl. taxPreliminary estimate for one variant
Reloading tray for .338 Laupa Magnum. Fits also for smaller caliber.
Print approx. €4.90–€5.99 excl. taxPreliminary estimate for one variant
A simple paper towel holder that is made of three 3d printed parts and a rubber band. Can be used with paper rolls of any length. One-handed use and reload. Parts can be secured with double sided tape or screws. Just attach a rubber band…
Print approx. €8.12–€9.92 excl. taxPreliminary estimate for one variant
Blood Group Keychain (all types) + Your Information Text / Brelok z Grupą krwi i informacjami do kontaktu. A+ , A-, B+, B-, AB+, AB-, 0+, 0- Below are videos on how to edit the inscription on the back of the keychain How to ADD any Text…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
To put the ring back in place, you will need to unscrew the grill, put the ring back in place, and screw the grill back in place. I stuck colored labels on the console with double-sided tape. Category: Gadgets
Print approx. €1.22–€1.50 excl. taxPreliminary estimate for one variant
If you have brambles, raspberries, rose bushes or even grapevines in your garden, you need to attach them onto a trellis to manage their shoot's growth. Especially blackberries can be very nasty and hard to control when trying to tie it…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for PETGSource material: PET
The valentines day version of the happy flexi squirrel, holding a heart! Works great as a multi material print on the MMU or XL as seen in the Green and Magenta example or as a single color print in the light pink example. Prints best in…
Print approx. €1.83–€2.24 excl. taxPreliminary estimate for PETGSource material: PET
add something later here =)
Print approx. €0.97–€1.18 excl. taxPreliminary estimate for PETGSource material: PET
![[REMIX] Side Release Buckle](https://media.printables.com/media/prints/893197/images/6954021_bcb3ca3a-2941-4485-b2c8-8efc9394b770_1937b2a9-331b-4a86-a6f8-c3370d38a7c7/remix-srbuckle-1-1.jpg)
![Rode Wireless Go Handle - Shorter and Thicker (Condenser Mic Form Factor) [remix]](https://media.printables.com/media/prints/708849/images/5560717_ae14a831-061b-4090-9d33-a60d35514964_04cd4bb4-c195-4a5b-b810-5629f3b2daa1/perspective.png)
