Counting matching models…
Wanted a cap that sat a little firmer on, as they tend to fall off, or crack when you try to make them sit well. Recommends printing with maximum 0.1 layer height. Printing multiple at once is no problem. Remember dry filament. You might…
PLA / PETG 0,1-0,2
Combination of two models from Thingiverse: Middle Finger Schrader Valve Cap Presta Valve Cap This is the first iteration of this design, made in a few hours pretty roughly. Threads came out pretty nice with no supports inside the valve…
I have modeled this usefull bike tool. But I have modified original design to be able to use both "holes" to screw/unscrew presta valve core (see attached photos). I have tested and fits perfect, no loose. Enjoy Print instructions…
Made for the Replacement Parts contest. The core model is a functional replacement for Presta and Shrader type dust caps as round on most cars and bicycles. After printing check internally for any hanging plastic which could depress the…
Description: Never lose your road bike pump adapter again! This 3D printable keychain holder keeps your Presta to Schrader (AV to SV) adapter securely attached to your keys or bag, so it’s always ready when you need it. The actual adapter…
Easily top up tubeless bicycle tires with sealant through the valve using these 3D printed funnels. No more spills or blocked syringes! I provide funnels for both Schrader and Presta valves. More info and Fusion and STEP files here.
This small grommet allows you to use a presta valve in a Schrader valve hole without cutting or herniating the stem. I use Schrader-ready rims on all our touring bicycles because in the middle of nowhere, you never know what kind of tube…
My bike trailer has these *** Dunlop valves that are the worst. This adapter stays fixed to the valve(s) and makes pumping air into the tyres much easier. Printed in PETG, 0.4 mm nozzle, 0.2 mm layer height, only perimeters, arachne
A Presta cap for your bicycle valve in the shape of Bender's head from Futurama made for a friend - TUG
Replacement cap for Presta/Racer bicycle valve. Precision of the threads may depend on the printer and printer settings. The threads are, on purpose, a bit loose. I have successfully printed this with a 0.4 mm nozzle and 0.2 mm layer…
A small funnel for tire sealant especially for Presta valves (with thread)
Create long-lasting flames with this waterproof firestarter! Flames last 10+ minutes, even in the rain! No plastic is burned for this model - instead, the mold is used to create a waterproof wax and dryer-lint (or sawdust, paper, etc)…
It's a cool presta valve cap, so I don't have to buy it when I loose mine =D It's also bigger, so you can print the color you want and will be very cool =] print in 0.1 height for better results (avoid thread issues)
A fancy Presta valve cap for your bicycle, which shows your initials. Pimp your own ride or gift it to a friend. There are >600 STLs included with all possible 2-letter combinations so you can pick the one you need directly. In case you…
This Merida branded valve cap goes over the entire presta valve stem, giving your bike a clean look. The threads are modelled as M6 with a 0.8 mm pitch, but still I had to scale the valve cap with 98% in my slicer. Thus, you might need to…
To fill inner tube you must remove valve core.
Mr. Kim Leng Thai Food Flying Restaurant from the 5th Element. or torture test benchy. ?? kimleng3 = basic model without computer aided orientation. (pick your own orientation) kimlengorientationvs = auto oriented with meshmixer for best…
not tested I would be very happy about a Make, Like or Share! Happy printing!
Hex valve cap with Moai on top got the valve cap base form here https://www.printables.com/model/524947-hexagon-presta
At a time when Single Stage To Orbit (SSTO) reusable vehicles were strongly pursued by NASA, a proposal by Lockheed Martin (Skunk Works) had plans of potentially replacing the Space Shuttle with a new concept. The Venturestar was designed…
A restaurant/eatery-sytle table for 1/64 (S-scale) models Recommended print settings: 0.1 mm layer height, use organic/tree supports, use a raft, and a better quality filament (pictured are various Prusament filaments). Be careful when…
Just a remix of a hexagon presta valve cap and a money statue, fits perfectly and snug, doesn't move around. pretty strong threads
A quick and easy tool to remove the valve core on your Presta bike valve Uses a very low amount of filament Print settings don't really matter as tool doesn't require much force to remove the valve core, but i prefer to iron the top for a…
Disclaimer I unfortunately don't have access to other types of valves as of right now. I will be looking into adding more in the future. Tested Print Settings Material: PLA+ Supports: None
Simple adapter for Presta style values to be used with Schrader pumps/air compressors. Added a clip to attach to my pump/compressor hose so I don't lose my adapter (again)!
I'm always on the lookout for some new useful thing to print, and just yesterday I happened to notice the little black tool in this Instagram post from Stan's NoTubes . Clever little tool to help remove a Presta valve nut from a tubeless…
This idea was inspired by the survival paracord bracelets that are meant to ensure the wearer always has a length of cord. I always liked the Monkey's Fist knot, and thought why not put something useful inside rather than a wooden ball?…
This is a Presta valve cap with proper #10 24tpi threading to fit the valve better than other models out there. it included a filleted square hole for removing the valve core on Presta valves. I find Presta valve tools to be small, and…
Simple screw-on cap for Presta/Sclaverand/French type valves. If you like this design, please consider leaving a ♥heart. Thanks! ---------- Update: Added a version with 0.2 mm clearance. If you are unsure, print this one. ----------…
Tiny tool to open a stuck Presta valve nut (not to remove the valve). These are quick to print and are small enough to throw a couple into a bicycle toolkit in case of emergency. Works best with PETG on 0.15mm.
I wanted to print some Presta valve caps. Unfortunately a lot of the existing models I could find needed weird scaling for the threads to work. I modelled these with the proper #12, 24 tpi found on the Presta valve core. I made a few…
This is a valve cap in the shape of a cat head that fits Presta Valves. No supports needed I printed in PLA on my Ender 3 using a .4mm nozzle I recomend using variable layer height around .08 - .1mm layer height, thinner layers where the…
It's a presta valve cap, that's a banana! Print any ol' way you please.
I accidentally ordered Schrader rims, but didn’t have Schrader tubeless valves kicking around. I have some excellent 76 Projects Hi Flow tubeless valves, and the top of these valves is big enough to seal against the Schrader-sized 8mm…
in my mini world my bike is the astronaut's spaceship
I designed this for H0 Train scale. Feel free to use however you want, you can post a picture of how your print turned o
A nut to secure a Presta valve stem firmly against the rim. Category: Vehicles
Modélisation d'un fauteuil pour voiture restaurant Category: Other
Print with brim. I used PETG and 15 percent infill 2 perimeters. Worked fine.
This model functions as an insert in an Altoids-style tin to hold fire-starting materials. I designed it as a gift for Cub Scouts who were “crossing over” into Scouts BSA. The insert will fit in a tin that is approximately 95 x 62 x 20…
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker I recommend using a brim. It's only a ten minute print. No…
Printmaterial: I recomend using PETG Settings: 100% infill 0.10mm layerhight Supports: none Printer: Prusa mini + Printtime: ca. 20-25 min HAPPY PRINTING :-)
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre A detailed 3D printed figurine of the iconic Krusty Krab…
Print neck down, I didn't use any supports and it came out great.
italian hand gesture emoji presta valve cap
FIRESTAR As a child, I always enjoyed the cartoon show "Spiderman and His Amazing Friends". This came out in 1981 when I was 8 and Firestar was above and beyond my favourite character. I was already an avid reader of comics by that point…
The title basically. Prints without supports, I recommend a higher resolution (0.12mm) for better threads. 3 variants: Short valve cap Long valve cap Long valve cap with threads deeper in the cap
This is a simple plaque for reserved tables at a restaurant. 120 mm long (resize at your taste). Use layer change feature to get the letter contrast. Languages available: -English -Portuguese -Spanish
This is a small part that sits between your bicycle rim and the valve stem ring. The main goals of this part are to prevent the valve stem ring from scratching the rim, and prevent the valve stem ring from vibrating and making noise.…
Clean build plate and brim are advised! Also print multiple at once so each layer of each piece has time to solidify before the next one is set on top. Additionally, the color can be swapped at 6.6mm to make the 1x1 brick more…
Based on the Wheels Manufacturing PSS-1 , whose measurements are posted as follows: Length: 11.4mm Outer Diameter: 8.2mm / 9.3mm Inner Diameter: 6.15mm I guessed the flange to be 2 mm tall. First print came out too small on the ID & the…
Presta valve caps lives in the toughest condition, high speed, jumps, whips, mud and rocks. With all those elements, thes guys can get scared and terrified. I rode those for the entire season now and they are still holding strong (cause…
Presta valve tool for remove and install the valve body.
Big Chungus presta cap I made as a joke for a friend to test my 0.2mm nozzle
Porte carte pour restaurant, il n'y a pas de réglage particulier, mais je conseil tout de meme de le remplir un peu pour tenir face au vent.
Not quite a remix of the Valve stabiliser for carbon road bike wheels as I modeled it from scratch, but definitely an inspiration, so wanted to give the credit. Sometimes a Presta nut doesn't sit quite right on a rim profile, generally…
Start a fire in any conditions - my tests have shown more than 10 minutes of burn time, even in the rain! The FireCube uses just dryer lint and candle wax to make a long-lasting and safe firestarter. The cube is designed with slits to…
Cura slicer. Printing temperature 215 degrees Celsius. Print speed 30mm/s. Z seam alignment - Random, to avoid seam. Material PETG. Support is not required. Only brim.
A small curved washer for use with generic "aero" rims. Helps more with tubeless systems where air leakage around the valve needs to be mitigated. I modeled this off of one that came with a Diamondback Airen 1, 2018 model. Printed in PETG…
Quick release deflater for Presta valves which are commonly found on bicycle wheels. Unscrew the Presta valve locknut and push this piece on, it will hold itself in place while it holds the valve open, allowing the tire to deflate while…
not tested yet I would be very happy about a Make, Like or Share! Happy printing!
Restaurant to Another World
Es una maquina manual que se usa para mover cualquier tipo de objetos.
menu holder max (16cm wide) with salt and pepper, sugar or other organiser. i designed this menu holder for my workplace. me and my customers love it you can personalise with your brand logo or drop me a text and i can try to write for…
I designed it with this shape in order to screw and unscrew easily, faster and thigter than the standard shape you usually find for this tool. N.B: not all the presta valve has a removable core Print it with a strong infill and I suggest…
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre Stylized figurine of the Chum Bucket, the rival…
Tool for presta valve core replacement
Print in vase mode (Spiralize Outer Contour in Cura) with no bottom layers with 0.65mm line width (no need for 0.6mm nozzle, 0.4mm nozzle can print up to 0.8mm lines without any issues).
I had found a nice tyre sealant applicator but it was missing the feature to place the sealant in side the tyre with out placing a lot around the treats of the valve. so I made one. there is 1 edition with a cap for storage and…
This is the Tire Lever to rule them all. With its compact design it's easy to carry with you. The tool features a spoke lock to allow for hands-free usage with multiple levers and a cutout that fits around a presta valve core to quickly…
I tried downloading some models but they wouldn't fit well (usually too wide). This one has a bit longer body than the plastic ones typically found around - for easier manipulation but at the same time not too long to prevent interfering…
A small curved washer for use with generic "aero" rims. Helps more with tubeless systems where air leakage around the valve needs to be mitigated. I modeled this off of one that came with a Diamondback Airen 1, 2018 model. Printed in PETG…
TinCognito - Mini Survival Kits upcycling Altoids Tins. The TinCognito shell helps keep the tin closed and makes it easy to identify the contents. See it in action here: https://youtu.be/n5_aQ29rqwE The blank one can be used with the help…
Transform your desk into a miniature cityscape with this incredibly detailed fast food restaurant 3D model that captures every architectural element with stunning precision. This meticulously crafted STL file showcases the iconic building…
A keychain that connects to a Schrader (German) to Presta (French) air valve adapter (the adapter screws into the keychain). Allows carrying an adapter on a keychain for bicycle air filling "in the wild", in gas stations etc. for bicycles…
Made to replace the adapter that came with my bike pump. Needs an O-Ring of ID between 4-6 mm. To use it: Open the nub on the presta valve, screw on the adapter, attach air pump with schrader connector to adapter. The O-ring should…
this will fit on presta valves that have a threaded shaft it doesn't twist on to the upper most part pf s presta valve.
This is a series of designs with different textured grips for the Presta (aka French) valve dust cap found on road bicycles. The OpenSCAD source code is included but requires the BOSL2 library for the threading and textures. The cap…
Valve Cap for French or Presta Valve for the Bike. No thread inside because thread is not needed - it will self cut the thread when you tighten it on the valve. Category: Sport & Outdoors
Slight remix of an adapter by fpetrac. I printed his version and had air leak out around the threads on the outside. I just smoothed that area out and now it makes a better connection at the ball tire chuck on my air hose. Category: Other
Presta valve wrench for removal and installation of Presta valve core/stem. Compact, for storing in your bike kit. Dimensions: 35 mm L x 9.5 mm Dia. I print with >50% infill and 4 wall loops for strength. If it works for you, please Like…
Presta valve washer / spacer. Works well with tubeless valves. Designed for rims with 27mm outer width. Possibly fits other rim widths. You can change it by editing the attached FreeCAD project file. Print Settings Printer: Voron 0.1…
Clips pour tenir les tige en metal dans les portiere
Table at your favorite restaurant rockin'? No more. Just pick the appropriate thickness and shim that leg. Still un-level? Use another on the opposite leg. Eat/drink in peace. I have the wife keep a few in her purse. I usually leave them.…
The tool works great in silk PLA and PETG-CF so far. It's a quick print, coming in under 3g of filament. I printed both materials at 0.20mm layers and arachne wall gen on. The silk was printed with “strong” 6-wall defaults, and the…
Presta Skull Valve Cap Category: Other
As seen on Instagram - hold two tubeless valve bodies or valve extenders together so they don't get separated in storage. Three versions for various printers: Prusa MK3S sliced at 0.300mm layer height with PrusaSlicer - 1.13mm wall…
Print with the smallest layer height possible for the best result
These are all the parts we used in the Lack enclosure restack series.
I printed the model on its side in 0.12mm layer PETG.
See Diresta's youtube video for how he created the original. Use string for the spring and a pin for the trigger.
I made this holder to store my Jimmy Diresta Razor blade. It uses a round 8x3mm Magnet to hold the razor to the holder. The Model has a built in key hole slot to go right on a wall. There is also a French cleat to be glued on the back if…
Based on the Wheels Manufacturing PSS-1 , whose measurements are posted as follows: Length: 11.4mm Outer Diameter: 8.2mm / 9.3mm Inner Diameter: 6.15mm I guessed the flange to be 2 mm tall. First print came out too small on the ID & the…
Chicken Valve Cap Presta V2 Category: Other
Hey there Tribe; I'm at it again with time a disposable straight razor handle and blade guard, this is slightly smaller in hope to fit it to an ender 3. you can also see I gave the handle a more sloped look. Here's the blade:…
Frog Valve Cap Presta Category: Other
Presta valve cap with dinosaur figure on top. The model is threaded although you can additionally cut threads with 5v2 tap if you have one, To print is successfully it needs support under chin. Printed in pla and petg.
My hand pump was older than the new model where Decathlon has introduced this adapter. I didn't want to throw away my pump, nor to buy the repair kit, because in the kit there are also other pieces I didn't need. So I just reproduced it.…
