174 models
In collaboration with HyperPlay RPG , I have designed a grip for the RG35XX H games console. Print with supports 15% infill 0.2 mm layer height See HyperPlay RGP's review of the grip here: I also sell this on my website and Etsy store ,…
Print approx. €3.51–€4.29 excl. taxPreliminary estimate for one variant
Print with the flat part of the grip on the print bed with supports. I used a threshold angle of 10 degrees with snug supports! Feel free to get this directly from me here: https://dildesigns3d.etsy.com
I designed this because the existing models on the internet were either paid or not well made. It fits snugly and does not slide off. The current version turned out to be slightly smaller than expected, but it still fits my (average size)…
I wanted some better ergonomics while I played my games. I remixed the grips from STR to fit the RG35XX. It's a snug fit. Printed in PLA with supports on build plate.
The Anbernic RG35XX H is a retro handheld emulation game console that runs on Linux. It's design and shape allows for a case that be used on the front or back of the device, allowing the case to be used as a grip case or a protective…
IF YOU NEED THE EPIC ULTRA FOR THE "RG351MP" ( Metal Plus) FOLLOW THIS LINK!!!: https://www.printables.com/model/240177-anbernic-rg351mp-game-pad-epic-ultra Please respect the Licence the thing comes with! Thanks Thanks to Thingiverse…
Print this with the top side of the clip down. I printed with supports with a 10% support angle threshold. You shouldn't need a brim depending on your plate, but I printed previous versions with a brim just to be sure! Feel free to get…
This is a simple stand for the Anbernic RG35XX. I was having some trouble with bed adhesion so I added tiny tabs on the corners that are easy to cut off and added that as a second STL file. They are 0.15mm tall so they should only be 1-2…
A comfort grip (for when the device is opened/in play) and a standing case (for when the clamshell is closed) for the iconic Anbernic RG35XX SP. It has access to all the ports on the side and bottom of the device. It can be printed with…
RG35XX Skadis mount Print the model in the default orientation, with supports enabled. You may need to sand down the pegs in order for it to easily fit in the pegboard. I have also included the .step files with and without the pegs, in…
Information about the model: Inside the case there is about 1mm of play on each side so that foam rubber or similar damping can be attached. The lower shell (Part_2) has an elevation so that the shoulder buttons are not pressed in.…
Anbernic RG351p case. Designed to be printed as one model without supports The height of the case is made to add the original white foam that is added in the box with the console. If you don't have this foam the console rattles a little…
If you like this model, show some love, hit the like button. Version 2 of the ergonomic grip for the Anbernic RG 35XX (RG35XX). Now has rounder corners for comfort and different printing orientation. Print in PLA Needs supports
The Anbernic RG35XXSP is a retro handheld emulation game console that runs on Linux. It's design is boxy and this is for people who want a little bit more grip to the console, but still keep the slim and portable nature of the console. I…
A slip on button and screen cover for the RG35XX Plus. Wide opening for USB-C cable clearance. Print without supports.
A display stand for your RG35XX or RG35XX Plus. Simply place the hand-held in to the stand and it will automatically start charging, so you’re always ready to game on the go! 8.5 mm rubber feet: https://amzn.to/4aqaWQ1 Specific USB-A -…
This case is made of two halves that can be connected with either a length of filament, or the use of #16 finish nails as “hinge pins” to connect them together. The case features a slot in the back to use as a display stand when not being…
Love the rugged box model and decided to adapt it for use with my RG35xx I left about 2mm of space all around the device to be able to add some foam padding. For the padding on the face I used the foam that the device was shipped with.…
Clean display stand for this amazing little machine
Please respect the Licence the thing comes with! Thanks Thanks to user "Threat_Craft" who test printed the prototype, provided pictures and the dimensions so I was able to adapt the epic ultra to the RG353m as I don't own it myself.…
UPDATE: Included another version of the grip that includes some ridges inside where the device goes. It holds the device much tighter where it will not slide out by accident. It did create some small scratches on the side of RG35XX Plus…
Great grip to help the RG35XX+ more comfortable for longer sessions.
Used PrusaSlicer to customize the RG35XX stand made by jlips. The Anbernic logo is borrowed from the boot logo I'm using for a different look. I also added negative volumes on the bottom for rubber bumpers I had laying around to ensure…
Prints fine without supports. Turn on ironing to clean up the inside faceplate that actually makes contact with the rg353v. I used a roll of felt tape to line the inside from amazon. This is really rough as this is my first remix but…
3D printable dock designed for the Anbernic RG353V handheld gaming console. This dockholds the console during storage or charging. The dock includes a channel for a type c cable. Prints fine without supports.
An all 3D printed case for the Anbernic RG35XX Plus. No screws are needed for the assembly. if you a short cable or a fiber cloth you might be able to store it ind the case to :) When printed, just put the lid on and put some 1,75mm…
IF YOU NEED THE EPIC ULTRA FOR THE " RG351P or M ( Plastic or Metal) FOLLOW THIS LINK: https://www.thingiverse.com/thing:4702672 !!WARNING!! After placing your RG351MP into this game pad holder, be prepared that you never ever want to…
This case is made of two halves that can be connected with either a length of filament, or the use of #16 finish nails as “hinge pins” to connect them together. The case features a slot in the back to use as a display stand when not being…
These are some custom replacement buttons I made for the Anbernic RG35XX.
Printed in clear PETG. Organic supports, zero interface layers. Big shoutout to JTEE3D for the excellent step file render of the device, it helped a lot! Happy printing! Update: Included .step files for easy modification. Share alike!
Feel free to use this to develop your own accessories!
A simple stand for the Anbernic SP
RG280V, RG351MP, Nintendo New 3DS XL Grip
Print in TPU with supports nice and slow with the flat side down! I used a 10% support threshold. If you want to buy this from me or want to support me, follow this link here: https://dildesigns3d.etsy.com
!!IMPORTANT!! DO NOT just slide your RG351P into the Game pad holder after Printing!! There is one important task to do before you can safely attach your Handheld to the game pad holder! CHECK Pictures for instructions!! Heat the marked…
Display stand for the retro gaming devices Anbernic RG353V and RG353VS.
Grip, front cover and stand for the Anbernic RG351V retro gaming handheld. The grip makes longer gaming session more comfortable without blocking buttons or connectors on the bottom of the device. The front cover protects the screen, top…
Mount for the RG351P on the Ikea Skadis
Basic Skadis mount for the Anbernic RG353V/VS. Supports needed for Skadis Pegs. Included STL, F3d, 3mf files. Used IKEA Skadis Fusion 360 Double Hook: https://www.printables.com/model/118225-ikea-skadis-fusion-360-models/files
There are two files, a version that is .8mm thick and a version that is .6mm thick. The .8mm version is almost silent, but the buttons are a little stiff. The .6mm version has a soft audible click, but the buttons feel a bit better to…
DISCLAIMER: Modding your electronic devices can be dangerous, and you may end up damaging them. Use at your own risk. The author of this publication is not responsible for any damage caused as a result of using these models. Protection…
This grip is for the Anbernic RG35XX H, making it more comfortable to hold while you game. Its ergonomic shape helps reduce hand fatigue during long sessions and gives you a better grip, so it’s easier to enjoy your games without your…
I liked the feel of @dildesigns ergonomic grip and the sleekness of @m00nd0gg slide on design , so I hacked them together to create this slide on ergonomic case for the Anbernic RG35XXH. I printed in PETG, 15% gyroid infill, and supports…
Charging dock for the RG35XXSP. Made a bunch of these for the kids in my life this year. Print the front and back in PLA or PETG, and the feet in TPU. Assembles with QTY m4 screws for the feet and snap-together front and back halves that…
I Made a Charging Stand for the RG35XX and RG35XX 2024 with the Orginal USB-C Cable + USB-C 90° and Fleece fixed with Hotglue. USB-C 90° from aliexpress Fleece from aliexpress
This is a snap case for the Anbernic RG353v. It's meant to be felt lined to protect the device and to create a tight fit. I used 1.2mm x 31.8mm wire brads for the hinges.
This is a grip for the Anbernic RG35xx. It's got long handles for people with larger hands. Edit: Adds a v2 with a stronger grip on the console and a rounded bottom so it doesn't cut into your finger as you play (sorry about that with V1)…
RG35XX H grip, with corrugated surface (plus smooth also) for better grip and less hand sweating. Print Settings Printer Brand: Anycubic Printer: Kobra 2 Rafts: No Supports: Yes Resolution: 0,2 Infill: 15% Filament: Sunlu PLA White Notes:…
I made this case from scratch in OnShape for an Anbernic RG353M Print with bed supports. 0.2mm I used 3 walls, but 2 could probably work. Use 1.75mm filament for hinge joint Use Felt sticker inside to protect screen. You could also line…
The case fits 1x RG351MP and 2x micro SD cards Non-printable parts: 12x ⌀4mmx4mm magnets 2x button head wood screw 3mm x 20mm to 40mm in length a little bit of glue No supports are needed. Control dimensions of handheld before printing…
Finally done, a nice comfortable grip for your original RG350. The base for the design was a very ruff 3D scan of a Xbox 360 controller I found online. You need some sponge rubber or thin felt for the sides, as this Gamepad secures your…
Ich habe das Modell von Whity angepasst, damit es für den Anbernic RG351M passt (aufgrund der ähnlichen Abmessungen könnte das Case auch für den RG351P passen). Damit auch anderes Zubehör wie Kabel oder SD-Karten, Adapter, usw. Platz…
Here we have a little front cover for the RG35XX, friction fit, pops on and off, good fit, it won't drop off accidentally in a bag or pocket, not so tight as to put undue pressure on the device. Subtle cosmetic detailing on the front,…
A nice comfortable grip for your original RG350P and RG350M The base for the design was a very ruff 3D scan of a Xbox 360 controller I found online. You need some sponge rubber or thin felt for the sides, as this Game pad secures your…
A simple model to fill the holes left when analog sticks are removed. They snap in and sit flush with the front of the device. Check out my profile for versions for the RGB30 and RP2S. Originally tested in PLA, 0.2 layer height, 100%…
I know you always wanted to display your Anbernic RG35XX! Now you have a chance to have very nice stand for your favourite handheld. BUT REMEBER ABOUT THE DUST ABRASION! What I used? Here: Printer: Creality Ender 3 V2 Neo. Nozzle: 0,4 mm,…
Handle for the Anbernic RG35XX Plus
This is a snap case for the Anbernic RG35xx and RG35xx Plus. It's mean to be used with flet lining to protect the device completely. I used 1.2mm x 31.8mm Wire Brads for the hinges. Depending on your printer tolerances, they should be…
Rework off Tomunderwood's Gameboy Advance SP Rugged Case to suit the Anbernic RG35XXSP
Comfort grip for Anbernic RG351V model. Ergonomic design makes game play more comfortable. Hole on bottom allows you to charge or plug in headphones without the need to remove the grip. Designed using TinkerCad
Mostly tried to resolve some minor annoyances I was having trying to take good care of the device :-P - Bumper style case to avoid screen sitting flush against surface - Spine along back to prevent easy accidental L/R trigger presses -…
Thinner version of https://www.printables.com/model/829340-anbernic-rg35xxh-bumper-case with cutout in the back.
I made them with fuzzy skin in mind, so the tolerances are jank, and you may need to trim the smallest bit off the edge with a razor. I really wanted to make sure the L2 and R2 wouldn't also click the L1 and R1 buttons, and this was the…
A remix for the ANBERNIC RG 35XX Pro
Mostly accurate reference model for the Anbernic RG35XXH.
Simple remix of the Retro Gaming Handheld Ergonomic Grip by gevo4258 , which slightly adjusts the opening at the bottom so that the grip can be used with the Anbernic RG300 and RG35xx. Can be printed with PLA, but needs support. Mine was…
Print with the flat side against your build plate, supports will not be needed. The case is designed to be used with the foam insert that the RG35XX ships with, I attached mine with a little glue. If you don't have the foam it shipped…
This is a remix to fit the Anbernic RG35XX plus. The original RG35XX is 2cm thick and the plus version is 2.2cm thick.
Perfectly fitting hinged case for the Anbernic RG35XX Plus.
I found that both the 0.8mm and 0.6mm variants of @8BitDrip_2287972 's RG35XXSP Membrane Inserts were too thick, so I used Blender to make an even thinner 0.4mm variant. I find this thinner variant works very well in my RG35XXSP and feels…
Needed a Skadis Mount for my Anbernic RG35xx H. The original model was to wide for the RG35xx H, which is why I remixed it to have a better fit. I just made it about 5mm narrower, it fits perfect now. If you'd like to print the model…
A very slim and stylish Case to protect you RG351P. ( still waiting for my RG351M to test if it fits as well, it should but cannot say for sure until I was able to testfit) It comes in two versions, with and without an USB pass through.…
!!WARNING!! After placing your RG350P into this game pad holder, be prepared that you never ever want to play in a different way. After experiencing the comfortable grip it will feel all wrong to you using your device without it! You have…
!ATTENTION!_ EXPERIMENTAL_DESIGN! (Print if you dare!) When I did some prototyping for the RG351p gamepad holder a print failed midway as for some reason the print head must have pumped into the print and went on shifted, until it was…
Ikea Skadis holder for Anbernic RG35XX or RG35XX Plus. Charge port is accessible from the bottom. Support needed for middle hook only.
-------------------10/07/24------------- IT HAS BEEN DONE! I figured out the sticking and I think I make it a little better than the first round with the L2/R2 buttons. Check out the V2 of those and let me know if you see anything that…
Link for grip : https://www.printables.com/model/469500-anbernic-rg353vs-grip
I removed the text from @soulrider911_26733 's GBA SP stand to have a blank faced version to use for other devices. I then scaled it in the slicer and added text for the Ambernic RG35xxSP.
Description I designed this cover to mainly protect the screen and to be as thin as possible. I did want the RGX35XX to still be very pocketable. About this model: The black and red on the pictures has the first 3 layers made of PETG as…
I just purchased an Anbernic RG35XX Pro and wanted a way to securely carry it in my backpack when I travel. Similar to the original, you'll need six (6) M3 25mm. There are approximately 2mm of space on all the edges for adding padding.
This is for the RG35XX+, I don't think it will fit the original RG35XX. Included the SolidWorks file if anyone wants to make edits.
Hi i designed this simple controller grip for the anbernic RG35XX H. It just fits snug with the console and does not cover the buttons. One has cutouts for the speakers and sd-card slots and the other one has no cutouts.
AAAAAAAAAnd yet another holding device for the RG351P. This time not as fancy with a more practical approach in design. It is super low profile and even so it does not look like very comfortable, it actually is an pretty welcome…
I made a protective cover for my Anbernic RG35XX H Hand-held. Unlike alternatives this cover allows me to always keep cards with firmwares and games next to the hand-held. Also, there are some minor elements improving overal convenience…
%% update More beefy handle versions are added as v2. better experience for me. furthermore, no need to print with support. %% Initial release Ergonomic(?) adapter for the Ambernic RG353V. Initial release. Just tested. It needs printing…
To adhere the logo well, use support in the lettering area.
A little desk holder for an Anbernic rg35xxsp. Print in place.
!!WARNING!! After placing your RG350 into this game pad holder, be prepared that you never ever want to play in a different way. After experiencing the comfortable grip it will feel all wrong to you using your device without it! You have…
For use with Nathan Kean's hand grip.
An upgraded version of the previous model.
Designed after the work of IamDroBro (and mb also Emotional-Priority49) on Reddit for the RG35xxsp. This dock suits the RG35xxsp - check your model no. Hardware required: 4x M3x8-12mm countersunk bolts 4x 4.5mm(w) x 5mm(d) M3 threaded…
I couldn't find a stand for the RG35xx plus. So I designed this one in Onsdel (FreeCAad)
Nothing special but displays the SP in your collection.
I made a stand for my Anbernic RG35XXH its super simple but works and should be a pretty quick print.
Magnetic RG35XX H Case Recently discovered these anbernic devices and they are a game changer! Endless hours of fun in such a small device needs to be celebrated! Created this case so i can chuck the console in my bag without worrying…
The model was based on https://www.printables.com/model/1152772-honeycomb-storage-wall-anbernic-rg35xxsp-mount. Thanks to the author @SamuraiLink3. Print settings Support: Yes Filaments: PLA, PETG Fill: 15-20%. Perimeters: 3
RG351V grip (longer handles) Remixed HAYES9412 's model Printed in PETG no supports .4 nozzle
I wanted to make sure the screen protector was aligned correctly with my RX35XX Plus, so I made this guide. This should also work for the RG35XX. I attempted to follow these directions (with no stickers) and used a squeegee tool as shown…
