217 models
A simple low-poly design of a rhombus structure pot. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print) Recommended using a…
Print approx. €2.06–€2.51 excl. taxPreliminary estimate for one variant
This model prints flat, then folds along the edges to form a rhombic dodecahedron. The inner sides snap together, as shown in the video below, to hold the shape without additional connectors. If you change filament mid-print, you will…
Print approx. €2.39–€2.92 excl. taxPreliminary estimate for PETGSource material: PET
Easy 10min Print NO SUPPORTS Containers From Amazon LINK⬇ TUZAZO 4 Oz Plastic Containers with Lids and Labels BPA Free, Clear Empty Refillable Round 4oz Plastic Jars with Lids for Cosmetics, Lotions, Body Butter, Slime & Beauty Products…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
Need a plant pot that barely fits the print bed? No Problem! Don't like the size? Scale it down (or up if you wish) to suit your needs. There are two parts to this, the pot (for your plant to sit in), and the frame (for your pot to sit…
Print approx. €18.68–€22.83 excl. taxPreliminary estimate for PETGSource material: PET
This model is a 2 frequency breakdown of an icosahedra. The procedure I followed was from “GEODESIC MATH AND HOW TO USE IT” by Hugh Kenner, 1970 edition. Method is chapter 10.
Print approx. €8.51–€10.40 excl. taxPreliminary estimate for one variant
Make a Truncated Tetrahedron structure from 4 identical L-shaped pieces made with Rhombic Dodecahedrons. The pieces can be printed without supports and have a 0.25 mm spacer between the rhombic dodecahedron units, so they stay together…
Print approx. €1.57–€1.92 excl. taxPreliminary estimate for one variant
Lampshade fits to hemma ikea lamp with rhombus pattern, I've made 2 versions. Print instructions Layer height: 0.2mm Perimeter: walls - 4 , top - 5. bottom 4. Infill: no matter The assembly is very simple - attached it to "HEMMA" OR…
Print approx. €12.50–€15.28 excl. taxPreliminary estimate for PETGSource material: PET
Make sure to put the white before the pips in the panel on the right!
Print approx. €6.56–€8.02 excl. taxPreliminary estimate for one variant
A great Lamp. Print. Turn on LED Stripes. Infinite Cubes. Math.
Print approx. €0.92–€1.13 excl. taxPreliminary estimate for one variant
I saw a wooden version of this floating around instagram - a puzzle made of rhombuses, which when combined can fit into the hexagonal base. There are apparently, multiple solutions where all the rhombii will fit within the base, but only…
You may subtract a part of the sphere with negative volume in Slicer and sit it on any lightbulb as a lampshade. For impressive shadow projection make sure your light is as small as possible. Avoid diffuse bulbs, better go for pointlight…
This model features a wireframe rhombic dodecahedron, designed in CAD and refined through an iterative process to form a Sierpiński Octahedron fractal structure. It includes a seamlessly attached base and prints without requiring any…
This is a vase designed out of pure Golden Rhombi discovered by Stanko Bilinski. I remixed this vase from: http://demonstrations.wolfram.com/OctahedralVase/
Low Poly Spheres: Low-poly, high-fun! Low Poly Spheres is a series 3D printable models of polyhedra that look like low-poly spheres. You may remember from math class that polyhedra are solid 3D shapes with flat polygonal faces, straight…
There are many Rhombic Dodecahedron models but this one is mine. Onshape model here - https://cad.onshape.com/documents/93ba8776109c61d7d17b3a96/w/c3fbc13e38bff88b61c2eff1/e/1e6ad75df001c75085a09624 The STL file is a 25mm Rhombic…
If you want to support my work, you can buy me a coffee . Also check out my other models .
Low Poly Spheres: Low-poly, high-fun! Low Poly Spheres is a series 3D printable models of polyhedra that look like low-poly spheres. You may remember from math class that polyhedra are solid 3D shapes with flat polygonal faces, straight…
This is a reproduction of "The Dana Set of Wooden Crystal Models" originally produced by Dr. Krantz Rheinisches Mineralien-Kontor (Bonn). triclinic monoclinic orthorhombic hexagonal/trigonal tetragonal cubic I recreated the models based…
Approximate size of this design is: 120mm x 120mm x 120mm. The time to print and fully assemble is approximately 6 hours. Gears and core may be printed in any material. Clips were designed to be printed in PETG. Once the clips are…
cone for electroculture spirals to be used with 3 mm 3.5 mm aluminum wire. The spiral (half or full return) is recommended with 7 (14 if double) turns from left to right or with anti-clockwise winding (right-handed) under penalty of…
Rhombelle is a compact cotton pad and swab organizer for your vanity, dressing table or cosmetics shelf. A recessed diamond pattern meets a smooth surface along one continuous diagonal. The rounded body and clean edges give the design a…
Customizable tube with rhombus holes. You can configure length, diameter of the tube and the number and size of the rhombus holes in OpenSCAD .
Truncated Tetrahedron Cuboctahedron Truncated Octahedron Truncated Cube Rhombicuboctahedron Snub Cube (laevo, dextro) Icosidodecahedron Truncated Cuboctahedron Truncated Icosahedron Truncated Dodecahedron Rhombicosidodecahedron Snub…
Adorno Navidad Rombos / Chistmas Ornament Rhombus
This model features a wireframe Rhombic Dodecahedron , designed in CAD and refined through an iterative process to form a Level 1 Sierpiński Octahedron fractal structure . It includes a seamlessly attached base and prints without…
This model features a Level 3 Sierpiński Pyramid fractal structure made from Rhombic Dodecahedra. Looks pretty trippy and prints great with no supports! 😁 I've included a 3MF that will produce the print shown in the photos. Here are the…
I made this model while exploring fractal geometry using CAD software. Because of the complexity, slicing can take a while and you’ll want a decent PC to handle it smoothly. The print itself is also a long one. The example print shown…
Plant trellis for air succulents
This model features a wireframe Rhombic Dodecahedron, designed in CAD and refined through an iterative process to form a Level 3 Sierpiński Octahedron fractal structure. It includes a seamlessly attached base and prints without requiring…
Object description: Every year the same problem. 3D stars or big baubles are beatiful but need a lot of space for storage. For this reason I designed a modular system. It's easy to assemble and disassemble. Welcome to the Modular 3D…
A unique 12-sided die using everybody's favorite Catalan Solid - the Rhombic Dodecahedron. That's a 12-sided die where every face is a rhombus. On the faces are the numbers one through twelve written in everybody's favorite numerical…
A Printable Rhombicuboctahedron as drawn by Leonardo da Vinci in Pacioli's Divina Proportione c.1495 with a captive ball. This model tests your printers bridging and overhangs and should be printed without supports on the external shape…
Here is a quick video of the printed model. ⬆ The Compartmentalized Rhombic Dodecahedron is a unique geometric model featuring a rhombic dodecahedron with subdivided, hollowed compartments within each face. This design highlights the…
This Hyperbolic Rhombic Dodecahedron captures the precise geometry of negative curvature across its twelve rhombic faces. Each face bends inward, creating a mega-trippy form inspired by hyperbolic space! 🌀 I created it while experimenting…
This model features a wireframe Rhombic Dodecahedron , designed in CAD and refined through an iterative process to form a Level 2 Sierpiński Octahedron fractal structure . It includes a seamlessly attached base and prints without…
This is just a nice little rhombus pattern to print on fabric. I recommend pausing in the middle ( .6 mm height). should work fine with .2 and .3 layer heights.
Each circumscribed radius is set to the same. ref) https://dmccooey.com/polyhedra/Archimedean.html Truncated Tetrahedron Cuboctahedron Truncated Octahedron Truncated Cube Rhombicuboctahedron Snub Cube (laevo, dextro) Icosidodecahedron…
This model features a Level 5 Sierpiński Pyramid fractal structure made from Rhombic Dodecahedra instead of Octahedra, designed with strategically placed gaps for seamless vase mode printing. I've included a 3MF file that will produce a…
A simple rhombohedral bravais lattice for 3d printing. Printing Temperature: 230 C Bed Temperature: 60 C Infill: 20% For best results, print with a large brim. The original print here, was printed with a 25mm brim.
Presenting the Redi Rhombic Dodecahedron, my implementation of an edges-only corner turning Rhombic Dodecahedron. This puzzle is mechanically identical to the Coin Cube and Dino Rhombic Dodecahedron, but with Redi-style cuts. Sticker art…
The test of all tests in my opinion. If your printer can print this without any supports (it is possible) you have a well tuned in printer. I have included a beginner single rhombicuboctahedron and then a 3x3x3 array. To make it print…
This model features a Level 5 Sierpiński Octahedron fractal structure made from Rhombic Dodecahedra, designed with strategically placed gaps for seamless vase mode printing. The base is integrated into the fractal itself, forming a…
What is this? This is a tool to add rhombille-shaped surface texturing to your 3D prints just using slicer modifiers. It goes in the line of the Hex Grid Creator , which also had (limited) surface texturing abilities, but is more specific…
This stitch marker is a great way to use leftover filament when only a few grams remain while creating something functional for your knitting projects. The marker measures 1 cm, and no special settings are required for printing. Could you…
My friend needed something made to allow him to connect up a standard hose to his pump, so I quickly measured and modelled this adapter. I figured there might be other people out there who can use this, so may as well share this with…
Twist the triangles to make another type of shape of the earring
Triakis Tetrahedron Triakis Octahedron Triakis Icosahedron Triakis Hexahedron Rhombic Triacontahedron Rhombic Dodecahedron Pentakis Dodecahedron Pentagonal Icositetrahedron(dextro,laevo) Pentagonal Hexecontahedron(dextro,laevo) Disdyakis…
OpenSCAD dodecahedron. Set h to 1 to make rhombic dodecahderon https://en.wikipedia.org/wiki/Dodecahedron#Cartesian_coordinates Printed in: Filaments.ca Blue PLA CCTREE Red TPU If you set h to phi instead of -phi, you get an icosahedron…
This model features a Level 3 Sierpiński Pyramid fractal structure made from Rhombic Dodecahedra instead of Octahedra, designed with strategically placed gaps for seamless vase mode printing. I've included a 3MF file for a pyramid with a…
This model features a Level 4 Sierpiński Pyramid fractal structure made from Rhombic Dodecahedra instead of Octahedra, designed with strategically placed gaps for seamless vase mode printing. I've included a 3MF file for a pyramid with a…
FCC Orthorhombic Lattice Added supports from each face centred atom to bottom bond. Remove after printing. Printing Temperature: 230 C Bed Temperature: 60 C Infill: 20% For best results, print with a large brim. For the model here, a 25mm…
Simple but mind blowing effective tessellation
BCC Orthorhombic Lattice Added support from body centred atom to printing bed. Remove after printing. Printing Temperature: 230 C Bed Temperature: 60 C Infill: 20% For best results, print with a large brim. For the model here, a 25mm brim…
Print Torture Test It is a so called Rhombicosidodecahedron with Voronoi structure. It might be very hard for FDM but a good modell for SLA or DLP Printers. Category: 3D Printing Tests
Rhombic dodecahedron is a beautiful non platonic polyhedron. It can be stacked to fill a space much like hexagons fill a plane. https://en.wikipedia.org/wiki/Rhombic_dodecahedron if you have the patience to print a lot of them you can…
Rhombus Nut, more files/formats here: https://bit.ly/3MhFas3
Rhombus/Lozenge shaped cookie cutter
Base Centred Orthorhombic Crystal Structure Added support from base centred atom to bed. Remove after printing. Printing Temperature: 230 C Bed Temperature: 60 C Infill: 20% For best results, print with a large brim. For the model here, a…
Low Poly Spheres: Low-poly, high-fun! Low Poly Spheres is a series of 3D printable models of polyhedra that look like low-poly spheres. You may remember from math class that polyhedra are solid 3D shapes with flat polygonal faces,…
I designed this long ago to test my Phrozen Sonic Mini 4k. It was specifically to see how strong I can get such a delicate structure with Sirayatech Blu Resin. If your printer is tuned in and your curing is sufficient, this structure…
Printing only 1 element in 5 colours, you can build a rhombic triacontahedron - cool isn't it? You can even have a spherical one! Printing instructions: Avoid elephant feet at all costs to get a preciser fit. 0.3 mm layer height, no…
This model features a Level 4 Sierpiński Octahedron fractal structure made from Rhombic Dodecahedra, designed with strategically placed gaps for seamless vase mode printing. The base is integrated into the fractal itself, forming a…
This model features a Level 2 Sierpiński Octahedron fractal structure made from Rhombic Dodecahedra, designed with strategically placed gaps for seamless vase mode printing. The base is integrated into the fractal itself, forming a…
I stumbled upon this shape while experimenting in CAD and just had to share it—not only because I thought it was totally awesome, but also because I had no idea how to identify it! So, I reached out to the community for help, and a HUGE…
Turning Demo: A remake of a puzzle that I originally built around 2008. The original was built on top of an Eastsheen mini 2x2x2 with functional extensions that were cast copies of 3D printed masters. This new version is fully 3D printed…
A Printable Rhombicuboctahedron as drawn by Leonardo da Vinci in Pacioli's Divina Proportione c.1495. This model tests your printers bridging and overhangs and should be printed without supports. Suggest scaling to 30 - 40 %
Four more pots (maybe three?) for your gardening pleasure! The Rhombus and Hexagon II are two separate pots I created prior to melding them together into one of my other designs, the Rhombagon Spiral . The Balistra is something I did…
This is a tray-mount 60% keyboard case. It is a remix of the following model: KeyBoard Case for Mechanical KeyBoard (Pok3r, GH60, Satan) by MaxWinterstein. (See the "Remixed From" section in the sidebar to the left for additional…
R-blocks are a based on a rhombicuboctahedron with square openings cut through 18 faces. This provides many locations and orientations to connect the blocks together with small square pins. A corner pin is useful for supporting the inside…
Simple Orthorhombic Lattice Printing Temperature: 230 C Bed Temperature: 60 C Infill: 20% For best results, print with a large brim. For the model here, a 25mm brim was used.
Low Poly Spheres: Low-poly, high-fun! Low Poly Spheres is a series of 3D printable models of polyhedra that look like low-poly spheres. You may remember from math class that polyhedra are solid 3D shapes with flat polygonal faces,…
A truncated rhombicuboctahedron as a hollowed out bead. https://en.wikipedia.org/wiki/Truncated_rhombicuboctahedron This convex polyhedron is special in that it features all the main crystallographic planes 100, 110, and 111. Plus the 211…
I made this self-similar rhombic dodecahedron fractal model while exploring geometry using CAD software. In my opinion, it looks especially stunning when printed in dual or tri-color silk PLA. Print Settings (I Used the Bambu Lab P1P):…
This is a Rhombic 12 sided dice. The Customizer lets you place up to 12 characters of text along the long diagonal of each side. [* IMPORTANT * ] I cannot stress this enough. This dice has 12 sides but there are only 6 text lines. You…
This model features a Level 2 Sierpiński Pyramid fractal structure made from Rhombic Dodecahedra. Looks pretty trippy and prints great with no supports! 😁 Here are the settings for FDM printers- Layer Height: 0.16mm Infill : User…
I used freecad to create this model and cura to slice it with special-mode (Mold) enabled, the model was placed upside down on the build surface in the slicer and the settings were 1: wall thickness =10 mm, 2: angle = 45, 3: roof = 0.…
This is a compound of a cuboctahedron and a rhombic dodecahedron, modeled in CAD as the base shape for a new fractal series I'm releasing . I’ve included the 3MF file for the exact print shown in the photos. That one was printed on a…
Bowl Rhombus Bowl in the photo is 60% scaled. Additional notes If you like this design, please give me a like and post makes.
This is another Planetary Explorer Module, suitable for holding 3.75 inch / 1:18 scale action figures. This one is inspired by a certain early 70's sci-fi TV series, but it's modular design allows for many more combinations. The different…
Rhomble Using a parallelepiped as a building block, we also designed a three-dimensional variant to confuse Cartesian solvers even more. Rhomble is this puzzle, a crooked box must be filled with seven crooked pieces. Printing Instructions…
This model features a Level 3 Sierpiński Octahedron fractal structure made from Rhombic Dodecahedra, designed with strategically placed gaps for seamless vase mode printing. The base is integrated into the fractal itself, forming a…
Introducing a versatile Rhombus Strip Spacer designed for the easy and precise mounting of rhombus slats on fences or facades. This spacer ensures consistent spacing between slats, enhancing both the aesthetic appeal and structural…
I made a model of a very light cell holder for assembling a 4s1p 21700 battery… 2025 06 28 v. 2
This model features a Level 1 Sierpiński Octahedron fractal structure made from Rhombic Dodecahedra. The base is integrated into the fractal itself, forming a cohesive structure that prints without the need of any supports. I hope you…
This is made using the Opencad program below. fi=atan((sqrt(5)-1)/2); for(i=[18:72:378])rotate([fi,i,fi])cube(50,true); Shout out to OpenSCAD in a tweet. (Challenge?) by Ferjerez Shout out to Aqee Print Settings Printer Brand: Printrbot…
The Compartmentalized Rhombic Dodecahedron with Attached Base builds on the elegance of the original design with a seamlessly integrated base for stability and display. This enhanced version prints beautifully, quickly, and support-free.…
Transform your space with a touch of nature! Print recommendation: It is recommended to use a lower layer height (0.15/0.2mm) to obtain better detail results. Planter size 100x100mm The model is scalable For example: If you want 70x70mm,…
A few years ago I made some furniture based on the rhombic dodecahedron. It was pretty hard to image possible shapes, so a model version was needed. It is also a great pen holder that you can play with (or explain the rhombic dodecahedron…
Plant pot Rhombus - Flowerpot Rhombus Plant pot in the photos is 60% scaled Additional notes If you like this design, please give me a like and post makes.
Edge Length: 9 Acute Golden Rhombohedron Obtuse Golden Rhombohedron Rhombic Dodecahedron Bilinski's Dodecahedron Rhombic Icosahedron Rhombic Triacontahedron Rhombic Hexecontahedron Edge Length: 6 Canonical Joined Truncated Icosahedron…
There are a bunch of workflows you could use to create this design. This is just one of them as an exercise to learn FreeCAD. The 3 bodies are internal and are defined by a spreadsheet making it parametric. You may also be interested in…
print with supports top of caps face up
M. C. Escher is one of my biggest inspirations. Also referred to as Escher's Star, this polyhedron can be seen in his famous work Waterfall, on top of the right tower . I created these models with a chamber on the edges, so that there is…
What is it? This model is a single tile. This tile holds an egg and has spaces for magnets in it. When you have 12 tiles and put magnets in them, you'll end up with 12 tiles that hold eggs and can fold into a rhombic dodecahedron. As you…
Vase Rhombus Vase in the photo is 60% scaled. Additional notes If you like this design, please give me a like and post makes.
Garderobenhaken für Rhombusleiste 105 Grad ich habe uns eine Formschöne Garderobe aus Rhombusleisten gebaut und nicht daran gedacht das kein Herkömmlicher Haken daran Platz findet. Der Haken sollte individuell hängebar sein und für kleine…
