4,609 models
Another take of the battery holder. No supports needed, print orientation like shown in picture. Enjoy
Print approx. €1.91–€2.33 excl. taxPreliminary estimate for one variant
When installing heat set inserts, a press tool can be a great help to ensure everything is aligned and straight in the end. And if you have a Dremel anyway, the Dremel Workstation can be a very versatile addition to your tool collection…
Print approx. €6.33–€7.74 excl. taxPreliminary estimate for PETGSource material: PET
This is to help you get that perfect first layer and determine where you need to make adjustments on your 220x220 bed. The Model is pre-offset in slicer will print perfectly aligned with 220x220 build plate. Run Brim test first to dial in…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant
Animal bookmarks are a set of 3 adorable bookmarks. Individual bookmark make time: 15 Minuets or less ! Set make time: 41 Minuets Filament use: 1.5g (estimate) varies depending on model Great gift which can be used to show people what you…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
What it is A compact gauge to determine inner and outer radii/diameter, ranging from 1 to 20 mm. It also works well as a coaster. What to print There are multiple variants awaiting you: central gauge version 1 measures from 1 to 10 mm in…
Print approx. €1.70–€2.08 excl. taxPreliminary estimate for PETGSource material: PET
držák nabíječky Parkside na zdi - udrží i baterii
Print approx. €7.96–€9.73 excl. taxPreliminary estimate for PETGSource material: PET
[DESCRIPTION] This model is a battery adapter : from battery parkside x20 team sold by Lidl to any Makita tool using 18v battery. It is an remake from Myle's work (see : thingiverse.com/thing:3110392 ). Thickness differs from original…
Print approx. €2.44–€2.98 excl. taxPreliminary estimate for one variant
držák baterie Parkside na zeď
Print approx. €4.02–€4.92 excl. taxPreliminary estimate for PETGSource material: PET
Bookmarks for Hogwarts Houses, Gryffindor, Slytherin, Hufflepuff and Ravenclaw with Harry Potter references. Credits SVG files used from the Noun Project Time turner by Made x Made Golden snitch / Potion Bottle by Locad Slytherin /…
Print approx. €0.67–€0.81 excl. taxPreliminary estimate for one variant
Model of a yorkshire terrier dog.
Print approx. €1.39–€1.69 excl. taxPreliminary estimate for one variant
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Print approx. €1.42–€1.73 excl. taxPreliminary estimate for one variant
11 in 1 - Workshop Multipurpose Tool Features : Scale - 55mm Screw / Bolt Length Gauge M series - Bolt Size Gauge - 1 / 2 / 2.5 / 3 / 4 / 5 Screwdriver + Bit Holder (BIG) Screwdriver + Bit Holder (small) Allen Key Size Gauge + handle…
Print approx. €0.76–€0.93 excl. taxPreliminary estimate for one variant
This is a quick a dirty version of the Honeycomb Wall PS5 Controller Mount. Got a hold of a Dualsense Edge controller and wanted to make a new mount that would allow owners of these controllers to still use the Honeycomb wall. Works with…
Print approx. €1.85–€2.26 excl. taxPreliminary estimate for one variant
Some new fireworks are in the sky! Falling stars and such are to be seen! So, we wish you all a Happy New Year already! Used Filament: This model was printed using ROSA 3D PLA-Silk Gold The ROSA 3D team was so nice to send us some samples…
Print approx. €3.63–€4.43 excl. taxPreliminary estimate for one variant
Welcome to Adudino: (One of) Your Gateway (s) to 3D Models Get exclusive and practical designs. Model Info A neat design bin to help keep your desk or other makerspace tidy. An exceptionally handy little waste bin for on your kitchen…
Print approx. €5.47–€6.69 excl. taxPreliminary estimate for one variant
A bunch of cute little animal pals to help hold your papers or perhaps mark a page in your favorite book. Great for using up those small bits of filament left on your roll. These are ready for print, no supports etc. If you're one of…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
I created these simple dividers to separate sections of 3-ring binders. They've worked for me for a few years as both dividers and as place-markers. Printing instructions Nothing special - just slice it and print it. I used solid 100%…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant
These small easy to print bookmarks are the perfect gift for the Star Wars reader in your life. They are also a great way to use up the end of a spool since they take less than half a meter of filament each. A card is included for gifting…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
Old collection of models I made for a stylized smithy workshop: https://sketchfab.com/3d-models/smithy-game-graphics-2015-54ce631950c1403bb33d2d81047a3a78 I've upressed these models and added minor texture detail to the surfaces through…
Print approx. €6.68–€8.16 excl. taxPreliminary estimate for one variant
Marksman-H Training Remote from Star Wars A New Hope. .obj file is an uncut high poly version. .3mf files slice the orb in half and add connectors for easy printing and assembly. gcode – see .3mf + includes organic supports. Christmas…
Print approx. €5.24–€6.40 excl. taxPreliminary estimate for one variant
Designed for dog lovers, these stylish clips feature outlines of various popular breeds, making them a unique and fun addition to your office supplies. Features: 🐾 Nine Dog Breeds – Includes Poodle, Akita Inu, Shiba Inu, Dachshund, Pug,…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for PETGSource material: PET
No supports needed! This model creates a large, sturdy leg to be used with the ZSA Voyager keyboard for a higher tent pitch. It is designed to fit snugly over the magnetic feet that come with the Voyager, which provides a sturdier and…
Print approx. €1.39–€1.70 excl. taxPreliminary estimate for one variant
A set of bookmarks featuring common airliner silhouettes.
Print approx. €1.60–€1.95 excl. taxPreliminary estimate for one variant
This is a design and construction of a small workshop vice, a similar type to vices offered by the YORK company.
Print approx. €4.20–€5.13 excl. taxPreliminary estimate for one variant
Spare part for designed for Marshall's Adventure city fire truck, but probably will work for other Marshalls truck as well. Some of Chase's trucks has similar devices so i included one for them too. I have printed it split in a half using…
Print approx. €0.97–€1.19 excl. taxPreliminary estimate for PETGSource material: PET
This is my slowly growing collection of bookmark designs, super fast to print. All prints have been tested, and include: Pac-man Ghost Edible Pac-man Ghost (don't eat it!) Dress Snowman Mr Hankey Fish Scary Face Eye of Sauron Chrismas…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
There is not much to say. I believe that the photos are self explanatory I printed with PETG but PLA would work too My son is named Felix. Please replace the name by yours or anything else as needed
Print approx. €14.61–€17.86 excl. taxPreliminary estimate for one variant
Tested on Qbrick Pro boxes, but I think it will also work on others that have installed inserts. PetG or Asa recomended. Supports have already been added.
Print approx. €3.74–€4.57 excl. taxPreliminary estimate for one variant
I created a bracket for the Parkside 12V wall charger IKEA Skadis. You need to print in portrait, use supports and I recommend a brim. You can use my attached 3mf file where everything is properly set up and tested. I recommend first…
Print approx. €1.69–€2.06 excl. taxPreliminary estimate for one variant
Race number holder specially designed for S-Works Tarmac SL7. Requires 2x M4 Socket Flat Head Screws and 2x M4 nuts.
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
This is a major revision of the previous version and reduces the print time/material consumed considerably. No supports needed! This model creates a large, sturdy leg to be used with the ZSA Voyager keyboard for a higher tent pitch. It is…
Print approx. €0.92–€1.12 excl. taxPreliminary estimate for one variant
Print approx. €1.81–€2.21 excl. taxPreliminary estimate for PETGSource material: PET
Updated 07/09/2022 A bracket has been added for use on ikea skadis or similar murals. ********************** First I want to thank the user JAAANIK for his cool design "PARKSIDE X20V TEAM KSGER STM32 OLED T12 PORTABLE SOLDERING STATION"…
Print approx. €3.53–€4.32 excl. taxPreliminary estimate for one variant
This part is to repair a workshop broom. The part is the plastic connector between the brush head and the handle. The broom is sold by a uk company called Jewsons. When making the model I increased the thickness of the material around the…
Print approx. €1.66–€2.03 excl. taxPreliminary estimate for PETGSource material: PET
Plain & simple; a raised multicolor sign for your office or workshop that is meant to parody a ‘Sensory Deprivation Chamber’ sign. Enjoy, and let it be a reminder that its good to take breaks every once in a while. Recently revisited with…
Print approx. €2.55–€3.12 excl. taxPreliminary estimate for one variant
Držák tužek pro nástěnný organizér na nářadí z Lidlu ( Pegboard Penholder ). Varianta 11,5 mm pro obyčejné tužky, a 17 mm pro fixy a silnější popisovače. Jednoduchý tisk s minimem tiskových podpěr.
Print approx. €3.21–€3.93 excl. taxPreliminary estimate for PETGSource material: PET
But this is a simple print to use as a spacer so you can easily hole punch plastic to make a face shield for the 3dverstan face sheild (north american) https://3dverkstan.se/protective-visor/protective-visor-versions/ Swingline used…
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for one variant
Recommended print settings: Material: PLA Layer Height: 0.10 Infill % : 15+ Supports: No Print Orientation: Flat side down Vectors image by SVG Repo : https://www.svgrepo.com/svg/477542/pointing-glove
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for one variant
Full Scale, Full Detail Darksaber from the Star Wars Franchise. This is the post-Clone Wars model featured in Rebels, Ma
Print approx. €7.29–€8.91 excl. taxPreliminary estimate for one variant
This is a super simple, small and quick bed aligner that works with any printer! Just attach some double-sided tape or glue to the bottom and you're good to go! There are liners for the side and corners, so no need to worry about the bed…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
Parkside battery reduction vs Riwall mower
Print approx. €5.12–€6.25 excl. taxPreliminary estimate for PETGSource material: PET
PARKSIDE 150mm Clamp Jaw Replacement To make this part stronger I printed this with 4 perimeters, 5 top and bottom solid layers and 60% of infill. Picture shows how it should be placed on the bed of printer. Material: PET-G, ABS, ASA etc.…
Print approx. €2.50–€3.05 excl. taxPreliminary estimate for PETGSource material: PET
Hello, Welcome to my profile, full of models and miniatures :-) I have a Hand-held phone holder for scrolling social networks for you. A great tool to prevent your hand from hurting when scrolling social networks. It fits any phone and…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant
Sports Bookmark Set – STL File (Set of 4 Bookmarks) Perfect for coaches, classrooms, and book-loving sports fans! This set of 4 sporty bookmarks includes designs for football, soccer, baseball, and basketball—each styled with a bold black…
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for one variant
I created a simple adapter for the Parkside PHKSA 20-Li C4 AKU circular saw for use with a MAKITA guide rail. I am using the C4 generation of the saw, but the base will probably be the same for older versions. I recommend printing on a…
Print approx. €6.13–€7.50 excl. taxPreliminary estimate for one variant
Remix of Mitutoyo caliper holder by pejvl2000 for Parkside pegboard. Modified for easyer print. Use two M5x8 screws from behind. Compatible with Mitutoyo 500-181-30, shorter and longer version and possibly with other calipers.
Print approx. €1.31–€1.60 excl. taxPreliminary estimate for PETGSource material: PET
Custom Cutout Gridfinity Bin for Parkside PFBSA 4 A1 Cordless Rotary Tool (from Lidl) Bin is 5 x 2 units - doesn't fit the Mini printer, so I prepared also the split version with dovetail joint to fit the Mini printer. ℹ 1 split part (for…
Print approx. €3.96–€4.84 excl. taxPreliminary estimate for one variant
Modified version of cBoLsmUiEc Darksaber on Makerworld to be used with Prusa Slicer. import the 3mf as project into Prusa Slicer so the handle and blade will print with the connector / hole as an alternative you can also use the provided…
Print approx. €1.67–€2.04 excl. taxPreliminary estimate for one variant
Maple seeds remind me of the fall, as they literally fall during the Fall. There are none near me, so why not print it! video of drop test #2: video of drop test: After searching online and finding a few existing designs to print, none…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
Created a set of bar ends designed to plug on a standard bottle cap from your favorite brand. Took the clamping idea from a make on thingiverse (3424052) Fits inside a bar within diameter from 18 - 21mm Add a pause to insert the nut.
Print approx. €1.43–€1.75 excl. taxPreliminary estimate for one variant
A model of the Lockheed Martin RQ-3 DarkStar that can be launched with a rubber-band launch or thrown Flight preparation: Bend wings upward (5 degrees is best I've found) (Dihedral) Bend real tabs UP (points nose up) Hold it just between…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
The bracket allows horizontal mounting of the micro grinder to the desktop. Print instructions Recommended material: PETG, but PLA should also work Settings: strongly advise to use more perimeters (4? 6?), 0.2mm layer height, supports…
Print approx. €5.03–€6.15 excl. taxPreliminary estimate for PETGSource material: PET
My daughter received this playset second hand, minus a few missing parts. There are a couple more pieces I plan on making, but so far I've just designed and printed the cross drill bit. Designed in blender based on measurements of the…
Print approx. €0.62–€0.76 excl. taxPreliminary estimate for PETGSource material: PET
Screwdriver Holder Parkside Performance 13 piece set one holder for three screwdrivers Pz3, Pz2, Pz1 … Držák šroubováku Parkside Performance 13 dílná sada lze vždy umístit tři velikosti např. PZ3, PZ2 a PZ1…
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for one variant
ASA, 4 perimeters, 20prc infill, 6 full bottom/top layers, with supports.
Print approx. €1.55–€1.89 excl. taxPreliminary estimate for one variant
Inspired by the Festool CMS PS 300 module, parts to install the PS300 Jigsaw inverted and collect dust (barely) using a Festool Cleantec hose. The plate is a shaperhub project . In addition the model includes a connector to fix the plate…
Print approx. €0.70–€0.86 excl. taxPreliminary estimate for PETGSource material: PET
This is a vertical organizer for forks, knives and spoons, so you can store the cutlery on the cabinet door and free up, use it and abuse, just keep your kitchen clean a a safe space, your wife will apreciate it!!!! There are two…
Print approx. €3.24–€3.97 excl. taxPreliminary estimate for one variant
Hi, I remixed the stand done by tritschi because after installing the excellent led light bar for prusa mk4 , it was impossible to put the case where it originally stand. Also I wanted it to be near the logitech c310 camera stand by…
Print approx. €2.85–€3.48 excl. taxPreliminary estimate for one variant
Presliced gcodes included: MK3S - QUALITY/SPEED; 0,15/0,2 layer height MK3.5 - STRUCTURAL/SPEED; 0,15/0,2 layer height MK3.9 - STRUCTURAL/SPEED; 0,15/0,2 layer height MK3.9S - STRUCTURAL/SPEED; 0,15/0,2 layer height MK4 -…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
Akkuhalter für Parksideakkus
Print approx. €4.11–€5.03 excl. taxPreliminary estimate for one variant
pratico supporto per avvitatore Parkside, ha un foro sulla parte bassa per poter attaccare il cavo di ricarica
Print approx. €2.42–€2.95 excl. taxPreliminary estimate for one variant
Replacement of the original Creative GigaWorks t20 or t40 volume control. More control and better grip
Print approx. €0.26–€0.31 excl. taxPreliminary estimate for one variant
Hello, I designt a insert for the board game "Parks" and his expansion "Nightfall" to fit booth in the box from the base game. Use my print and the insert from the expansion on top of the original insert. Print Settings Printer Brand:…
Print approx. €4.93–€6.03 excl. taxPreliminary estimate for one variant
Connector to attach a trim router table to the Shaper Workstation . It has an indent to hang the table on french cleats. See that project for bolt and knob needed to complete the project.
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for PETGSource material: PET
Hello, gnomarell, the gnome watching construction works. Thanks for your download, enjoy the print.Hello,
Print approx. €5.53–€6.76 excl. taxPreliminary estimate for one variant
About This VESA plate allows you to mount a compatible monitor or TV in a bicycle workstand. Its clamping area is a 36mm “tube-section” that fits neatly in the jaws of the workstand with no sharp corners. The top-end is filled so that it…
Print approx. €7.41–€9.05 excl. taxPreliminary estimate for PETGSource material: PET
Any feedback would be greatly appreciated . Perfect for miniature projects, modeling, dioramas, etc. Nozzle: 0.4mm Layer: 0.1-0.2mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed
Print approx. €3.86–€4.72 excl. taxPreliminary estimate for one variant
This is hose reduction from Herkules HDS 400 belt sander to parkside dust collector Category: Parts
Print approx. €2.49–€3.04 excl. taxPreliminary estimate for one variant
With a drill, clean the hole Ø3 of the 01_ChainLink and 02_ChainBucket . once the hole are relavorate you can press the 03_Link inside the 01_ChainLink and 02_ChainBucket. How many pieces you need depend if you are using the 09_Base or…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
Záložky do knih na motivy foto-video techniky. Bookmarks based on photo-video techniques.
Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant
Gerry Anderson was the creator of many TV series including Supercar, Stingray and of course Thunderbirds. Also U.F.O., Space 1999 and The Protectors. Gerry Anderson Day is on 14th April, so I've made three bookmarks to mark his Birthday.…
Print approx. €0.67–€0.81 excl. taxPreliminary estimate for one variant
I love my Michigan Synth Works F8R, and I wanted a way to label the CV routings on the unit so I don't have to remember them. I exported the gcode with supports, mostly because I wasn't sure if it would print well without them in the…
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant
Jedná sa o držiak bočného dorazu vrchnej frézy Parkside. Tento diel je špecificky navrhnutý pre použitie k vrchnej fréze Parkside POF 1200 C2, ale myslím si, že bude pasovať aj na nové verzie tejto vrchnej frézky. Tento držiak bočného…
Print approx. €1.21–€1.47 excl. taxPreliminary estimate for PETGSource material: PET
This hack enables you to close off the top of the Ryobi Storage Bin. By closing off the tray/bin with a flat worksurface your stuff is secured, and you can add tools (miter saw) to the top of it. You will not have to remove the tool from…
Print approx. €2.59–€3.17 excl. taxPreliminary estimate for PETGSource material: PET
Motivation I purchased a Thermoworks RFX Wireless Probe Starter Kit and wanted a dock to efficiently store and transport the probes in their charging blocks between the kitchen and my grill. Solution Design a custom Gridficiency-based…
Print approx. €4.03–€4.92 excl. taxPreliminary estimate for PETGSource material: PET
Filter ring This is the mold for the caulk that makes the sunlight filter Filter ring pressing tool You can clamp this on top of the filter after adding the caulk to get an even top surface Control box 2 piece print. This holds the…
Print approx. €0.37–€0.46 excl. taxPreliminary estimate for PETGSource material: PET
Halterung für Parkside Magnetplatte
Print approx. €2.79–€3.42 excl. taxPreliminary estimate for PETGSource material: PET
La poussière de meulage produite par mon touret salissait le mur derrière ; j'ai donc réalisé cette évacuation pour détourner le flux de saleté vers le bas. Impression rapide en PETG, buse 0.4mm, hauteur de couche 0.28mm (mode draft) car…
Print approx. €1.35–€1.65 excl. taxPreliminary estimate for PETGSource material: PET
This collection will be updated with new models from time to time! Ideas and suggestions on sizes and features are welcome! For full collection and editable STEP files, please purchase the full pack from here: Full Pack Download Modular…
This is a remix of the BTT HDMI display mount Voron with all modified parts being compatible with the originals design. So you can Use the remixed mount bracket with the original asymmetrical display frame Use the original mount bracket…
Crisp lines for a modern look. Thin and lightweight, fast to print. Print Settings: Layer height: 0.08 mm with a base layer of 0.16 mm Infill: 100% Notes: Optional: enable ironing for a smoother top surface Split objects manually by…
The Mandalorian Darksaber model designed by Polymath314 is gorgeous and I wanted to print it with the right color filaments to avoid painting anything so I split it up. The biggest challenge was splitting up the vertical stripes to still…
Follow me on Instagram or Twitter for weekly updates on free, high-quality designs like this. Get exclusive free designs, commercial licenses, and premium model plans on Thangs ! (affiliate link) This is a collection of fun and unique…
All props to Pattersaurus on Thingiverse for this. * You'll need THREE M3 x 8mm Screws / Bolts (no nuts) to attach this to your machine. * ****PRINT ORIENTATION**** - fins and holes face down on plate: Just as the first photo, place it on…
Easy Install version Snap-On set of bed sheet aligners. Compatible with factory bracket, Also Strain Relief & Cable Chain Anycubic Cable Drag Chain Anycubic Strain Relief PETG Print with 15% to 20% infill. Left Mount needs support:…
These are dinosaur themed bookmarks. Quick and easy to print requiring no supports and minimal infill. These were made from dinosaur Meeple models by Roberth Johansson (https://www.printables.com/social/221466-roberth-johansson/models)…
************************************************************************************************** See this YouTube video by Nils Rasmusson ( https://www.thingiverse.com/the3dprintingzone/designs ) for a performance comparison of this…
Follow me on Instagram or Twitter for weekly updates on free, high-quality designs like this. Get exclusive free designs, commercial licenses, and premium model plans on Thangs ! (affiliate link) This is a collection of fun and unique…
__________________________________________________________________________________________________________ ☀ If you want to sell prints of this model, as well as all of my models - future and past , become an Authorized Merchant member of…
Back Left Mount V3 Now compatible with Cable Drag Chain OEM Strain Relief Installation: 1, Hook the bottom corner under bed of OEM bracket first. 2. Hold the corner you hooked bring it around the bed. 3. Then press down on top of bed…
Eight page-clip bookmarks: Mario, Luigi, Peach, Toad, Yoshi, Bowser, Goomba and Boo. They print flat, need no supports, and slide over the top of a page so the character sits above the book. Each clip is one 0.8 mm plate — a character…
Follow me on Instagram or Twitter for weekly updates on free, high-quality designs like this. Get exclusive free designs, commercial licenses, and premium model plans on Thangs ! (affiliate link) This is a collection of fun and unique…
This mount allows you to quickly and securely attach your camera to the shoulder strap of your backpack. Using this mount you can access your camera at any time during activities such as hiking and never miss a moment. These types of…
Works with rotary tools like Dremel, Wen, HyperTough, etc. Attaches using 3/4 threads. Cuts 19 sizes of holes from 2"-6.5" Use 1/8" cutting bits like Rotozip Edits: Added Metric version Added slider insert version that allows the user to…
Thanks to Zack Freedman for the awesome Gridfinity concept. I remade it in SolidWorks for easy configuring. Just use the equations to change the x and y size, and the depth to move the main extrusion down. then add your features for…
This Is a port of the Gridfinity box to Solidworks and it is smart and fully equation driven file. Credit for the original design goes to Zack Freedman. All I did was port it to Solidworks. Link to original files…
Eight page-clip bookmarks: Harry, Hermione, Ron, Hedwig, Dumbledore, Hagrid, Dobby and Sorting Hat. They print flat, need no supports, and slide over the top of a page so the character sits above the book. Each clip is one 0.8 mm plate —…
It's called "Manta Ray" because I asked my kids what it looked like, and Rylee said, "it looks kind of like a manta ray." EDIT 6/19/2020: Added a "mouse ears" version. There are little circles at the ends that help hold it down. EDIT…
StackDrawer Workstation System Workstation System Stackable Part Drawer Organizer // Updates // 2026.09.14 - Added the Drawer Label.stl and Customizable Label.3mf The StackDrawer Workstation System is a modular drawer-based storage…
Print and make you very own Marksman Revolver! The front of the gun has a small lip for a piece of 3mm acrylic to fit in and potentially light with leds like the game. The chamber has a hole made for a skateboard bearing to fit in. This…
