Counting matching models…
It is designed to be used together with the filament spool inside the AMS to create the maximum exposure of the desiccant to the internal air. Model shown in the photo : Material: PETG Printer: Default setting Bambu Lab filament spool…
This is a wall mount for a Metabo PowerMax BS cordless drill. It allows to quickly access the drill by grabbing its handle.
⚠ WARNING ⚠ This bit holder is intended to be mounted near the motor. I’m not sure how much placing a permanent magnet near a DC motor would affect its lifespan or efficiency, but I guess it's better to pick the magnet that's not too…
This is a bit holder for hex screwdriver bits for the battery of the Metabo Powermaxx cordless screwdriver. It may also fit for other Metabo tools using the same batteries. There are two versions, one is for the 4 Ah battery, the other…
Handle for the Gardena electric lawn mower PowerMax Li-18/32. This can be easily used as a spare part for the old handles which will break after some time. The replacement is very easy. I printed the part in PETG and with a modifier of…
Simple stand that allows the waterbottles to dry out. Fits bot sodasteam and wassermax bottles. Print with standard settings in PLA or PETG
Blast it, another failure? Have you ever wanted to punish your dice for bad behavior, but felt that dice cages weren't secure enough? I bring you the new SuperMax dice prison! It prints fully without supports in a few hours and has room…
Inspired by https://www.printables.com/model/227397-portable-drill-guide , I modelled this drill guide matching my Metabo PowerMaxx SB from scratch. Properties: Max. drill diameter 4.5 centimetres Max. drill length 16 centimetres Base…
This is NOT a PRESSURE FITTING - it's an adapter to blow through an open air line. If you have a boat or cabin or rv or anything which you need to prepare for winter, blowing out the water lines is the simplest way of ensuring nothing…
This is a miniature version of the Chattermax toy from the Bluey television series. The dimensions are 2 ¾" tall and 2 ¼" wide.
50x50x2mm 1 color or 3 colors option you do not need MMU for this print with PLA and with supports - enjoy removing them, if you have MMU, make supports with different color PETG and pendant with other color PLA - it is easier for…
FOR METABO LC 40, 10,8 В, ЕС (627064000)
Bins for Performax 12-Compartment Deep Adjustable Small Parts Organizer sold at Menards. I wanted to get more spaces for parts I do not have a lot of. The bins are kind of deep so I use a magnet to retrieve magnetic items. Inside bottom…
This adapter can be used to mount a clik valve head with schrader thread to Schwalbe Airmax Pro tire pression gauge. Print it at 103% scale to compensate PLA shrinking.
Eurmax Pop up Canopy uses plastic bracket for truss joints. This is a replacement design that does not need any supports. Print it standing tall in the longest dimension. All hang overs are 45deg.
Had to make space inside the case and mount the fans on the other side, i.e. on the outside of the case. But then I had extreme airflow problems because the fans were only a few mm away from the original glass plate. But with this remix…
bombe_print.stl to print without support.
I made this gridfinity holder for a performax Deburring tool I printed it in MH build white PLA (not sponsored) Check out the timelapse I made here Hope you enjoy it! Thanks, Design lab 3d
Rmax2 shrouds for the inline rival burn. These were made specifically to clear the front grip. The back ones are only to match the front ones. Remix of https://www.thingiverse.com/thing:3173659 Print instructions Print Settings Printer…
TR4 to AM4 conversion kit for ENERMAX ELC-LTTR240-TBP LiqTech. Best with PET or PETG.
Not identical, but serviceable replacement for part 00057-77.279.02 Printing PETG No brim or supports 5 perimeters and layers 25% infill
Could not find a stand I liked for my Sparmax GP-850 airbrush. So I made one.
Bit holder Metabo for back panel. Designed for magnet size 10x20x4 mm Print Settings Rafts: No Supports: Yes Infill: 30% Filament: Flex TPU Category: Tools
Adapter to mount a 4" dust port to an older 16-32 Performax drum sander with a 2.5" port. Will require cutting the existing cover to enlarge the hole to 4" and a couple of mounting holes for bolts. Only Hardware required is two through…
Based on the 7.6m design shown on Gravitics' website in 2024. Not a space station in and of itself, but a capable habitat module for other space stations. Model is designed to use M5 threaded heat-set inserts to screw to other elements.
Rmax shrouds for the Talon Fang MK2 Print orientation is the second picture Remix of https://www.thingiverse.com/thing:3173659 since I can't list it as a remix. Print instructions Print Settings Printer Brand: Prusa Printer: I3 MK3S…
Wanted to mount my GoPro on my bow for hunting. This fits the third hole down on the riser of a Hoyt Powermax. As you see in the pictures it screws together decently. The parts shown are the prototype parts in PLA. I would suggest using a…
Resized the model from ClaytonM223 to fit better with the 66 mm diameter wheels on the starmax J3 cub.
I use this adapter with a SkyWatcher 120 ED Pro-Series. The internal diameter is 145mm. It was very hard to find the right thread dimension, it requires a very precise printing, so i divided it in two parts. Print the internal ring with…
Mount your shop lights (designed for the Performax™ 5000 Lumen 45" LED Shop Light ) with ease using these 3D printable brackets, designed to simplify the installation process and provide a secure, precise fit. Unlike standard keyhole…
UPDATE: Habe den Adapter etwas enger gemacht. Am Original Adapter muss etwas mit Schleifpapier geschliffen werden, danach halten die beiden Teile durch das sachte zusammenfügen mit einem Hammer. Ich wollte einen UNF Adapter für die…
Various rmax2 rails for various Rmax2 setups and regular setups. Rmax long rail x2 requires a larger build plate. It fits in place of 2 regular rmax long rails for a more complete rail look. Also fits on 4 segment rmax shrouds. Rmax 3…
A simple replacement barrel lug for the Supermaxx 5000 family of blasters. Fitted for 1/2in CPVC to be glued in. Can be edited easily to fire other types of ammo. Video showing the part: https://www.youtube.com/watch?v=ouISxhi7p7A…
DE: Einfacher Halter für einen Metabo PowerMaxx BS Quick (10,8V). Schraubbefestigung durch zwei gesenkte 5mm Bohrungen in der Montageplatte. Gedruckt mit Support für die Schraublöcher (geht vielleicht auch ohne). EN: Simple holder for a…
Remix, original from @Michele Barp Since I don't own the Schwalbe gauge, I cannot fully test this design. I just thought the adapter from @Michele Barp could be designed a little bit more elegantly. I simply adopted the thread on the air…
This vent diverter was made specifically for the RMAX Wolverine. It was cut into 4 total pieces so that it could be printed on a Mini, however I have included the full file so that it could all be printed in one piece if desired.
a holder designed for larger bit drivers compatible with the Gridfintity organization system
The included keyhole/screw or hanging chain mounting options are janky at best and frustrating. I designed this clip system to make mounting these lights MUCH easer and more solid. I printed it with 5 outer walls to make it effectively…
Motorola StarMax Floppy Bezel
This mount is used to relocate the air regulator valve on Sparmax compressors to a Skadis pegboard. Compatible with the following Sparmax models: TC-501N AC-500 TC-610/620 series It should be compatible with the AC-501X (which doesn't…
Doorbell cover (FERMAX) Let me know if you'd like another model, and I'd be happy to design it. More models on my profile. If you like any of them and want to leave a like, I'd be eternally grateful.
Remix of CSlawek desgin for Hypermax / Copozz mask (https://www.thingiverse.com/thing:4289127). This mask is sold under various brands - it is different from the Decathlon-style mask - the snorkel is round/cylindric. If used with just one…
This is a square base that I made for my Performax trim router. This is a store brand for Menards home centers. It looks identical to the Makita RT0701C, so it might fit that router as well. I included the technical drawing that lays out…
Was looking for a way to stop setting these down and losing them so I made these up in tinkercad quick. Hairspray holder Scraper holder Snips holder All Items should be printed with tree supports, although the print the scraper holder…
Printed with PLA+, 0.28 layerheight, 15% filling and minimal support. Has mounting hole at the bottom to fasten the Accsoon with regular 3/8 bold
da ein neues Zielfernrohr zu uns nach Hause gekommen ist, habe ich kurzer hand auch hierfür Abdeckungen konstruiert. Diese halten auch ohne Gummiband. Es handelt sich hier um das Hawke Airmax 30 SF Compact (6-24x50) ansonsten sind die…
Remixed version of Quin LED Dig Uno Case created for Intermax 4 M2x5mm screws are needed for the Dig-Uno and 2x12mm wood screws for the cable holders work best.
Please read the description carefully. Unfortunately, this model isn’t perfectly optimized for 3D printing. It requires supports for handle and case feet. But overall, it serves its purpose. To assemble it, you will need 2 long pins, 2…
Replacement manual handle for the spring clips on a Eurmax standard tent pole. I printed in Prusament PETG, when one of the factory units failed. The replacement has lasted 2 years now! It's important that the holes be precisely round, so…
Der Stiftehalter bietet Platz für bis zu acht Stiften und wurde mit einer Gridfinity-kompatiblen Unterseite ausgestattet. So lässt er sich sicher auf einer Bodenplatte befestigen und flexibel mit weiteren Modulen oder Baugruppen…
Replacement off the shelf power switch for performax air compressor
In the original design the letters E and A had holes in them.
sun and rain protector for the Fermax Duo X outdoor screen. Print in ASA for better durability. Print quality at 0.24, no support required, 20% infill
Maxmaker HiMill D1/D1S 3D-Probe Replacement Head
Three models for this first iteration: Panel Cover Helps prevent water ingress. Use small spacers (e.g. the toothpicks) to rest on top and a suitable adhesive. (I used a polyutherane based product.) Photos show the 8 button variant,…
These LEDs in my son's CPU cooler (Enermax-ETS-T50) were pretty glaring at the right angle when sitting at his PC so I designed this diffuser insert... no more glare. Print Settings Rafts: No Supports: No Notes: Print face down.…
Custom compartments for the Performax® 12-Compartment Deep Adjustable Small Parts Organizer Category: Tool Holders & Boxes
This receiver case is part of a 3‑piece upgrade kit that includes: • Battery hold‑down • ESC hold‑down • Receiver case (this file) If you like the fit and finish of this free part, you can grab the full 3‑part bundle on my Cults3D page.…
The little bag thing that came with my cheap self-leveling laser was terrible so I decided to make a simple 2 piece case for the laser, the mount, and the batteries. I've modeled in little supports for the battery area that can be cut out…
This is a cap for the ends of the Menards Performax Battery Charger and Maintainer. Printed with 100% infill for strength. PETG
Basically just replacement sizes for the small parts bin. For the large bin, included more sizes as well as insertable trays for additional customization of storage options. I've printed these in ABS with 0.6mm nozzle, though I don't…
For use with the excellent AirMax.1 by S.ID https://www.printables.com/model/738410-bambu-lab-filament-spool-desiccant-holder-_airmax1 S.ID's page: https://www.printables.com/@S_ID_1719910 This sits atop the chambers and separates them to…
I printed with 4 walls which should be more than enough. Infill doesn't matter that much. No supports are required. Obviously you want a UV-resistant filament if using it outdoors. I used PETG that's what I had and it has held up so far.…
Say goodbye to your busted rotation mech. This is a replacement trigger for the 1994 Larami SuperMAXX 1000 modeled after the factory one with some modifications. The roller mounts have been deleted since they didn't seem overly necessary…
Holder for this set. The included bit holders suck so I added dedicated holes for the bits, with an insert for the original holders to see the labels.
This is a cap for the ends of the Menards Performax Battery Charger and Maintainer. Printed with 100% infill for strength. PETG
Three models for this first iteration: Panel Cover Helps prevent water ingress. Use small spacers (e.g. the toothpicks) to rest on top and a suitable adhesive. (I used a polyutherane based product.) Photos show the 8 button variant,…
Bambu Lab AMS Desiccant Container _AirMax.2 (Does Not Fit In AMS 2 Pro) Maximizing the exposure of desiccant to AMS internal air, purposefully blends functional attributes with a dash of visual finesse, keeps the filaments dry, and…
Bambu Lab AMS Desiccant Spacer _AirMax.5 Station Base This base is an optional accessory for the AirMax.5 desiccant spacer. It bundles three spacers together, which creates a similar form factor as one roll of Bambu Lab 1 kg filament with…
RMAX and Wolverine Seat Risers ¾" lift on the front and small wedges for the rear to keep things flat.
Lost mine the car would not turn. Created replacement, more variants. Has to go from inside. requires support, and maybe some adjustment, created more variants.
Tormax automatic inswing door slide. I drilled out the holes after printing to place the original metal inserts. V2 resized to fit the slide better, added the holes to allow the metal inserts to be driven in. Category: Other
OVERMAX Bee 2.5 controller sticks replacement. Print Settings Printer Brand: Prusa Printer: Prusa Clone Rafts: Doesn't Matter Supports: Yes Resolution: 0.1 Infill: 40% Post-Printing Post processing Make sure that ball surface is smooth…
RMAX2 F shroud that has no holes on the back. Was made for the talon claw bullpup specifically. Remix of https://www.thingiverse.com/thing:3173659 since remixes are busted on thingiverse currently. Print instructions Print Settings…
I still had an old Biermaxx here and wanted to get it ready for the summer. I also ordered this tap and a metal tap bridge. Now I can tap really well using the compensator tap and can use normal CO2 cylinders.…
Bambu Lab AMS Desiccant Container _AirMax.2 (Does Not Fit In AMS 2 Pro) Maximizing the exposure of desiccant to AMS internal air, purposefully blends functional attributes with a dash of visual finesse, keeps the filaments dry, and…
