Bambu Lab AMS AirMax.5 Station Base for Desiccant Drying
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
To maximize desiccant exposure to the AMS internal air and to elevate the presentation by celebrating its attributes.
- Rating
- 0 / 5
- Likes
- 11
- Makes
- 0
- Views
- 2,262
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Standard Digital File License
Bambu Lab AMS Desiccant Spacer _AirMax.5 Station Base
This base is an optional accessory for the AirMax.5 desiccant spacer. It bundles three spacers together, which creates a similar form factor as one roll of Bambu Lab 1 kg filament with the standard spool, and dries the desiccant in a filament dryer without the need to unload or reload the desiccants throughout the process.
It is sized at 7.75" H x 2.25" W x 7.81" D. (all 3 spacers with the base)
Installation
There is two major locking sections, two indentation features at the front and two at the back. To press the indentation features in all at once is not easy due to their tight tolerance to better securing AM5 onto the base.
It is much easier to lock AM5 on by pressing in one section at a time then followed up with the other section.
Removal
It is easier and safer to release AM5 from the base with a tool then just try to force it out. The perforated side wall has enough thickness to hold the desiccants and maintain its rigidity , but it will not survive with excessive stress inward.
Printing
Please Note !!
- The feasible temperature of drying AirMax.5 with desiccant in a filament dryer depends on the MATERIAL it is made of. The higher the grade of material used, the higher the drying temp AirMax.5 can tolerate.
- The temperature in the AREA CLOSED TO THE HEAT SOURCE in a dryer tends to be HOTTER than the degree set up with.
!!! Enjoy !!!
Your boosting @ Maker World and purchasing @ Printable is extremely appreciated. This has made it possible for more projects to come (..or come faster !?)
!!! AirMax.1 is Here !!!
https://makerworld.com/en/models/176212#profileId-395076
!!! AirMax.2 is Here !!!
https://www.printables.com/model/889648-bambu-lab-ams-desiccant-container-_air-max-2
!!! AirMax.3 is Here !!!
https://makerworld.com/en/models/492462#profileId-406698
!!! AirMax.3 Add-on Cover & Lid V2 is Here !!!
https://makerworld.com/en/models/504213#profileId-932066
!!! AirMax.5 is Here !!!
https://makerworld.com/en/models/504213#profileId-932066
Update on the upcoming!
AirMax.4
Thanks for reaching out about the release time of AirMax.4. It takes quite a lot of time working on this one. Now that my printer is back revived and the AirMax.5 is published, will get back on track to kick it out asap!!
