2,755 models
I did not make this model, but decided to upload it here so it is preserved. Just in case it gets deleted from official site ( https://projecthailmary.com/ ). 3D Model Print Instructions: Grace Sculpture Keychain This model includes two…
Print approx. €0.96–€1.17 excl. taxPreliminary estimate for one variant
Note: Please check out https://www.kickstart-design.com for product design inquiries. Based in Milwaukee, Wisconsin, Kickstart Design LLC is a product development I co-own/operate. We offer a wide array of services that help makers turn…
Print approx. €13.14–€16.06 excl. taxPreliminary estimate for one variant
This model has been verified for compatibility using a GoPro Hero 4 case. It is not an official GoPro part — geometry recreated for functional interoperability. Dimensions: Diameter (x, y): 29.5 mm Height (z): 17 mm Hole size: M5 screw &…
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for one variant
The source marked this model as adult content.
Print approx. €3.97–€4.85 excl. taxPreliminary estimate for one variant
Drones are a perfect playground for lightweight yet robust designs, and Synthara takes full advantage of cutting-edge generative design techniques. This 3D-printed drone frame is engineered for FPV enthusiasts looking for a balance…
Print approx. €4.10–€5.01 excl. taxPreliminary estimate for PETGSource material: PET
Extrusion machine which allows plastic bottles (PET) to be recycled into printable filament for a 3D printer. I have made a guide in .pdf format, which summarizes all aspects of the machine with information.…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for PETGSource material: PET
It's hard to find project boxes with just the exact dimensions you need and even harder to cut square holes in the them. This OpenSCAD generated model is parameterized in width, depth, height and wall thickness. Set the dimensions you…
Print approx. €0.43–€0.53 excl. taxPreliminary estimate for one variant
Has a 10mm flat bottom to print on bed. SIZE: 20mm ball SUPPORTS: NO BRIM: OPTIONAL
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant
I discovered the amazing Print-In-Place Working Cannon model from Makkuro . It's amusing and very well designed toy. I decided to add another projectile variant to this model. The default projectile is a simple sphere, so I created…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
This is a remix that I did off of zx82net's Universal Parametric Project Box. I sized it and added the cutouts to fit 4 Neutrik D-Series connectors. Requires 4x M3 Screws, 6 to12mm long to close the lid. Uses M3 screws and M3 nuts to…
Print approx. €4.93–€6.02 excl. taxPreliminary estimate for one variant
A projector for GoBo that can be mounted on any flash (preferably one with a Led pilot light, such as the Godox MS300V). This is a personal elaboration inspired by the work of Petri Damsten ( http://petridamsten.com/gobo-holder/ ) and…
Print approx. €3.03–€3.71 excl. taxPreliminary estimate for PETGSource material: PET
After making the 3-in-one Matchfit jig, following their plans, I needed to make the tapering jig stops. Now, I'm a beginner woodworker and don't currently possess the preferred tools or skills to make something that small and exact. What…
Print approx. €3.79–€4.63 excl. taxPreliminary estimate for one variant
Rc 1:10 scale triangular roof tent. Střešní trojúhelníkoví stan. Stan se otevírá na kloubu s použitím M3 šroubu, v zavřeném stavu ho drží magnet. Při dotahování pantu nechte šroub volný a nedotahujte ho jinak praskne pant.. Rozměry:…
Print approx. €5.57–€6.81 excl. taxPreliminary estimate for one variant
Designed as a stand for the awesome XGIMI Elfin Portable Videoprojector whose size is 19.2 x 19.4 x 4.8 centimeters and weights less than 1kg, but the stand can surely bear heavier devices, just not sure how heavier. [edit] I added the…
Print approx. €0.32–€0.40 excl. taxPreliminary estimate for one variant
Martin is the king of Stargate models. Since Martin's model was uploaded, the PrusaSlicer added the ability to paint MMU colors directly onto models. As such, I went ahead and remixed his excellent model and painted a few of the model…
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for one variant
The PW-Mk.1 or Project Wingman Mark 1 is a fictional fighter jet from the game Project Wingman . This fighter jet has twin Cordium engines, essentially just nuclear engines. For its armaments it has guided rocket pods on along the top and…
Print approx. €1.33–€1.62 excl. taxPreliminary estimate for one variant
V3 - Larger fins for structural strength and stabilization Outer Diameter 23 mm Recommend cutting the model in half about 3/4 up with Prusa Slicer and having denser infill at the top (100%) compared to the bottom (50%-80% Grid). Print…
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
Crab holder for cnc tools. 4x - 25x25 9x - 19x19 25x - 11x11 Držák krabiček pro CNC nástroje. 4x - 25x25 9x - 19x19 25x - 11x11
Print approx. €8.25–€10.08 excl. taxPreliminary estimate for one variant
I have included my files, but your conditions may vary. With a large model, I found it useful to print with a draft shield.
Print approx. €7.35–€8.98 excl. taxPreliminary estimate for one variant
A plant pot inspired by the intricate structure of a slide projector. Used Filament: This model was printed using PLA Mineral Natural from Fiberlogy. The PLA Mineral series is our all-time favourite! The amazing texture of the finished…
Print approx. €4.09–€5.00 excl. taxPreliminary estimate for one variant
This is my first project created with hueforge. Project files for BambuSlicer and PrusaSlicer are included. Use following colors and swap them in the order below: Black Red Yellow White Filament changes are layers based so you won't need…
Print approx. €1.31–€1.60 excl. taxPreliminary estimate for one variant
Adam-M 's Catapult Card is realy great and the only missing peace are the right projectiles. So I resized the best flying projectiles from SteveJohnsen and put them into the Catapult Card. They are even flying faster know! One print,…
Print approx. €3.33–€4.07 excl. taxPreliminary estimate for PETGSource material: PET
A new design inspired by the illusion of movement form slide projectors. No matter how you rotate it, it will always look the same. Used Filament: This model was printed using Aircraft Grey Matt PLA from FormFutura The FormFutura team was…
Print approx. €2.60–€3.18 excl. taxPreliminary estimate for one variant
A Arduino/ESP8266/NodeMCU based RS232-MQTT-Bridge to control a beamer via the serviceport. You find the Firmware on my GitHub-Repo: BeamerControl Print instructions Parts 1x NodeMCU V2.x 1x MAX3232 RS232-to-TTL Adapter 4x 2.5mm Heat…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
Céčka mého vlastního designu, jsou tedy mírně jiného tvaru a rozměrů než ty “klasické”. Céčka mají osmiúhelníkový průřez pro lepší tisknutelnost. 3mf model obsahuje 5 ks od každého (18 ks) modelu (urychlení vlastníkům pomalejších PC -…
Print approx. €1.32–€1.61 excl. taxPreliminary estimate for one variant
Projector HY300 Cover This 3D model is a protective cover for the HY300 projector. It is designed to cover and shield the projector lens from dust, scratches, and other damage when not in use. The model is lightweight, easy to attach and…
Print approx. €1.95–€2.38 excl. taxPreliminary estimate for one variant
Transform a led tea light to a nice projector.
Print approx. €2.91–€3.56 excl. taxPreliminary estimate for PETGSource material: PET
I bought this "MaxDuino" board on eBay. It emulates a tape player for retro-computing. As I intend to use the board for my Acorn machines, it was modified to support Motor Control via the 3.5mm stereo plug. Design I used Fusion 360 to…
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for PETGSource material: PET
Replace the non-functional shelf caps with this 3D printed tight fitting one. This is for the Project Source shelves. These shelves come with a clear plastic cap, but they do not stay in place. Remove them and replace with this cap which…
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant
Hive board game, remix of the travel edition. I just took the original pieces and laid the right number of them on one plate. So you just slice it , print it twice with different colors and you are done. If you want to print in two colors…
Print approx. €3.41–€4.17 excl. taxPreliminary estimate for PETGSource material: PET
Credit to the Original Creator This model is inspired by the classroom project “3D Printing Truss Bridges” created by the user “PolarCloud” and published on the website https://www.instructables.com/3D-Printing-Truss-Bridges . Bridge…
Print approx. €0.14–€0.18 excl. taxPreliminary estimate for one variant
I was asked to make a spare PAW Patrol projectile, there are a few versions available but this one has a square head which I couldn't find online. So I created one in Onshape . Print at an angle with supports for extra strength. Feel free…
Print approx. €1.01–€1.23 excl. taxPreliminary estimate for one variant
This is my first project created with hueforge. Project files for BambuSlicer and PrusaSlicer are included. Use following colors and swap them in the order below: Black Red Yellow White Filament changes are layers based so you won't need…
Print approx. €4.38–€5.36 excl. taxPreliminary estimate for one variant
An other element for the 100hex project that is a really cool project. No support needed for both versions.
Print approx. €1.02–€1.25 excl. taxPreliminary estimate for one variant
I made this large and sturdy boxes specifically to be printed on large printers like the PrusaXL. They are meant as insets for drawers or cabinets, to provide containers that can be easily removed with its contents. These boxes come with…
Print approx. €14.87–€18.17 excl. taxPreliminary estimate for PETGSource material: PET
Contains Bleach Container, Water Bottle, TV Dinner, D-E Pistol, and Crowbar from Project Zomboid.
Print approx. €1.08–€1.32 excl. taxPreliminary estimate for one variant
Joint or Hinge component to be used in other projects . Allows you to create bit more sophisticated objects that have articulated parts. Enjoy. Feel free to remix etc. Created in Fusion360, however next iterations might be created in…
Print approx. €0.45–€0.54 excl. taxPreliminary estimate for one variant
Version 0.0.2 Release Changelog: Fixed centering of screen on display cutout Changed side plate mounting hardware to be completely printable 0.0.1 files moved to folder Added .3mf file with recommended setup for the case frame for…
Print approx. €1.04–€1.27 excl. taxPreliminary estimate for one variant
Hello World! In here you will find: What you'll need How to assemble the parts Wiring instructions Code for Arduino + instructions Let's go.. What you need: Arduino nano or clone (amazon - https://shorturl.at/egjK9 ) OLED display 128x32…
Print approx. €1.59–€1.94 excl. taxPreliminary estimate for one variant
If you have a projector with those discs, then print the box to avoid any damage or loss of loved discs. Stl file is for projector Mideer. It's modified coin cell storage box. The main difference is the little axle on one side of the…
Print approx. €2.75–€3.36 excl. taxPreliminary estimate for one variant
Bohrschablone 140mm PC Luefter fuer DIY Projekt - Virtueller Pinball (VPin) Für meinen Virtuellen Pinball (Flipper) habe ich 140mm PC Lüfter verbaut. Abmessungen: 140mm x 140mm Da dies ja PC Standards sind, können Sie auch auf andere…
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for one variant
Overview Have you found yourself looking for a way to keep your projects separated and organized? Introducing the project organizations system! Use the Husky organizer to store medium to small sized parts, and the lower bin to store…
Print approx. €0.74–€0.91 excl. taxPreliminary estimate for one variant
So I'm trying out a concept with this design - which featured in my OLED model here: https://www.printables.com/model/1172417-gridfinity-1x1-oled-display-ssd1306 I have added 2 layers of ribs around the bin. These will ‘click fit’ a 1mm…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
Projekt Leptan (Addon) Project Leptan: Lepta v1.0 RPLidar A1M8 mount including 40mm Fan mount. This mount replaces the TopBar or RingBar. In case of the RingBar replacement the LED ring will not have a place to be mounted anymore. The…
Print approx. €1.53–€1.88 excl. taxPreliminary estimate for PETGSource material: PET
Pococo Galaxy Projector Planetarium Dust cover / lens protector. Schutzkappe.
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant
EN: Power supply 2x1.5V AAA batteries for Christmas star at https://www.printables.com/cs/model/656256-christmas-star-vanocni-hvezda The electrical part needs: - 220 ohm resistance - 3V high luminance LED - 1 pc anode battery contact…
Print approx. €1.27–€1.55 excl. taxPreliminary estimate for PETGSource material: PET
enclosure for the ESP32 Network Blocker (Internet Kill Switch) - Project 1 as found here: rlatour.com/esp32networkblocker
Print approx. €0.76–€0.93 excl. taxPreliminary estimate for one variant
This is a modified version of the Steamdeck dbrand Air Tag by InsaneNemesis that includes the mounting pins from the official dbrand universal mount lock. You will have to download the original mounting plate from dbrand in order to make…
Print approx. €0.60–€0.74 excl. taxPreliminary estimate for PETGSource material: PET
Kryt terminálu s živým napětím pro zdroje MeanWell řady RD s terminálem se šesti pozicemi.
Print approx. €0.16–€0.19 excl. taxPreliminary estimate for PETGSource material: PET
Wall holder for Epson remote controller: 219863800. The remote control is used for several projectors, such as EH-TW7000, EH-TW7100, Home Cinema 3200, Home Cinema 3800 and more.
Print approx. €2.14–€2.61 excl. taxPreliminary estimate for one variant
Today I designed a project box to showcase an Arduino UNO build . The enclosure is made to neatly hold all core components in one place, with dedicated mounting points and clean cable routing. It includes holes and cutouts for 7 LEDs , an…
Print approx. €4.38–€5.35 excl. taxPreliminary estimate for one variant
You can either print it as a single object using Tree support and keep angle as 86 degree or I have also attached a split version where you can print them separately and use CA glue to stick them.
Print approx. €4.75–€5.80 excl. taxPreliminary estimate for one variant
This is a laptop stand with the capability to be used as a book stand for textbooks.
Print approx. €4.80–€5.86 excl. taxPreliminary estimate for one variant
přidány drážky po obvodu
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for one variant
Added version without cutouts in case you want to use another cable routing system. I used those 24V toggle switches (37 x 28 x 42mm/1.46" x 1.1" x 1.65") and this high CRI LED strip (they are getting pretty hot, so I have them in an…
Print approx. €1.15–€1.41 excl. taxPreliminary estimate for one variant
Extra Tray to project - Flowerpot-Knurling texture and other to secure gentle leakage
Print approx. €2.96–€3.61 excl. taxPreliminary estimate for PETGSource material: PET
Magnet vehicle [UFO] created for a school project. It moves very nicely in all directions. Two magnets needed.
Print approx. €2.60–€3.18 excl. taxPreliminary estimate for one variant
The projection unit of a radio controlled alarm clock went off after it fell to the floor (frequently I assume). The projection unit can be swiveled around about 90 °, i.e. the repaired one should have kind of a stop. The model consists…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for PETGSource material: PET
Z této desky si můžete obkreslit kruhy a trojúhelníky o velikosti 1x1x - 6x6x cm.
Print approx. €1.21–€1.48 excl. taxPreliminary estimate for one variant
Tento model je dělaný v blenderu. Prosím , vyskoušejte nejprve testovací tisk abyste si byli jistí že se do něj vejde váš holicí strojek. Chobotnici zvěčte tak aby držák odpovídal vašemu holicímu strojku. Určitě mi vyfoťte vaše výtisky a…
Print approx. €1.62–€1.98 excl. taxPreliminary estimate for one variant
no popis
Print approx. €1.86–€2.27 excl. taxPreliminary estimate for one variant
Um die LED-Beleuchtung des Gehäuses zu schalten, habe ich Montagematerial für diesen Schalter konstruiert. In die Seitenwand des Gehäuses werden Bohrungen mit einem Durchmesser von 26 mm und 3,5 mm angebracht. Das einfache Schutzgehäuse…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for PETGSource material: PET
Nutné dokoupit 9V baterii a https://www.muziker.cz/voodoo-lab-ppbat-9v-battery-snap-and-2-1mm-straight-barrel-cable
Print approx. €1.18–€1.44 excl. taxPreliminary estimate for PETGSource material: PET
Es handelt sich um eine geteilte Kabeldurchführung, die die Kabel vor Beschädigungen durch scharfe Kanten schützt. Ich nutze sie für das „ PrintClosure Project ”, um den Kabelstrang des Netzteils nach außen zu führen. Die Acrylglasplatten…
Print approx. €0.79–€0.96 excl. taxPreliminary estimate for PETGSource material: PET
Have fun with it! It worked perfectly to print it without support material
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
Vůbec nevím jak tento model bude fungovat při tisku. Určitě napište recenze a přidejte fotky. případně co nejdříve opravím chyby.
Print approx. €5.44–€6.65 excl. taxPreliminary estimate for one variant
https://www.laskakit.cz/lyonzg-s-360-24-modulovy-napajeci-230v-ac-dc-zdroj-24v-15a-360w/
Print approx. €6.79–€8.30 excl. taxPreliminary estimate for PETGSource material: PET
Diese Halterung wurde für das schwarze Netzteil des Prusa MK3 entwickelt. Damit kann es außerhalb des Druckergehäuses befestigt werden. Wie die neue Kabelführung aussehen sollte, lässt sich gut aus der mehrsprachigen Anleitung von Prusa…
Print approx. €4.46–€5.45 excl. taxPreliminary estimate for PETGSource material: PET
Im Rahmen des PrintClosure-Projekts , bei dem ein Druckergehäuse gebaut wurde, habe ich diesen Einbaurahmen entwickelt. In den Rahmen kann das digitale Thermometer-Hygrometer eingeklipst werden. Der Ausschnitt hat die Abmessungen 46,5 x…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for PETGSource material: PET
Hinweis: Aus Sicherheits- und Haftungsgründen dürfen Arbeiten an 230/120-V-Netzspannungsanlagen (Niederspannung) grundsätzlich nur von qualifizierten Fachleuten ausgeführt werden. Note: For safety and liability reasons, work on 230/120 V…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for PETGSource material: PET
This makes screwing and unscrewing of T6 button heads easier.
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET
Dies ist eine Halterung für diese LED-Streifen . Sie ist beweglich und kann somit blendfrei eingestellt werden. Der Druckraum des „ PrintClosure Project “-Gehäuses ist sehr gut ausgeleuchtet. Die ca. 11 W/m starken LED-Streifen werden mit…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
You have to print two pieces and glue them to the existing middle part. Thanks to this, the distance between the legs increases to 23cm.
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
Tiskárna se skládá z 2 upravených rámů z mk3 stejně jako bed. Místo lcd přijde xlcd. Budu rád za jakou koliv podporu. Pokud by vás cokoliv zaujalo neváhejte mi napsat.
Print approx. €1.36–€1.67 excl. taxPreliminary estimate for one variant
Pravděpodobně bude třeba upravit podpěry.
Print approx. €15.68–€19.17 excl. taxPreliminary estimate for one variant
This here is a prototype pic rail "chassis" for the Frommer Stop pistol, fully designed by yours truly. The model is heavily WIP, thus it has no actual way to attatch to the pistol. The reason it is here and unfinished is to allow you to…
Print approx. €3.85–€4.70 excl. taxPreliminary estimate for one variant
služi na odkladanie nastrojou
Print approx. €1.44–€1.76 excl. taxPreliminary estimate for one variant
Vytvoření 3D modelu z projektové dokumentace RD zpracované v SW Archicad. Výstupem je návod na převedení projektové dokumentace .pln do souboru .stl a následný export do souboru G-code pro 3D tisk.
Print approx. €1.75–€2.14 excl. taxPreliminary estimate for one variant
Stable and waterproof OpenSCAD case V7.4 by pbtec See here a wonderful comment from a user: “This is INSANE! You sir deserve deserve the biggest applaud out there. This is a box to rule them all! … I have to admit I first didn't…
Before you go further! This project is for personal use only. Any commercial use is forbidden Follow me on Instagram @StawiamKlocki.pl to keep up with latest designs Go to Google Sheets to get files list for your LEGO models Watch General…
A fully parameterized project box to customize for any of your electronics projects. Fusion 360 archive and STEP file provided. Material efficient, quick to print, dust proof. Requires 4x M3 Screws, 6 to12mm long. If you like it or…
This model comes in two different types, if you want just a figure then click on the figure folder, there is a version with supports and one without. If you want a posable action figure then click on the action figure folders, again, one…
Version 3 (03/22/2026) It's everyone's favorite Eridian! Based off of the blockbuster film Project Hail Mary adapted from the Andy Weir Novel. Print the quantity specified in the file name, the hands are your choice. Print with ASA or…
If you like this project please do press the like button above. It really helps me out. Thank you. 😊 How to build a very smart and low cost geometric lighting system. Meet Geoleaf, my low cost and 3D printable version of Nanoleaf lighting…
This is an enclosure I created while making my BMO embodied local AI agent. A full video break down of the project is available here: 🔧 Additional Hardware: Raspberry Pi 5 (16GB) Pimoroni NVMe Base Duo Geekworm X1203 5V UPS shield…
Easy customizable OpenSCAD electronic project box V2.4 by pbtec You’ll need to download the free, opensource OpenSCAD software from https://openscad.org/ and install it. Once installed, open the ".scad" file in Openscad. Activate…
Features A magnetic connector for low-powered, removable electrical connections Fits two 6 x 2mm neodymium magnets (Edit: Added files for 6 x 3mm, 5 x 2mm and 5 x 3mm) Compact and easy to build into your models - roughly 10mm tall and…
Amaze! Amaze! Amaze! Straight from the 40 Eridani system (and the official movie website), I have collected and optimized the official Rocky STL files for us leaky space blobs to print at home. While the original files are incredible,…
Greetings, fellow enthusiasts! I'm thrilled to share this 3D printed Raspberry Pi NAS project with you. I hope you find it not only enjoyable but also adaptable to your unique requirements. I am always eager to receive feedback to enhance…
I saw a bunch of 10in server racks when looking to get started with a HomeLab to tinker. Everything was built on an ender 3v2 so some parts have to print solo at an angle to accommodate the bed size. I used overture PLA The Lenovo…
This Universal Mount is designed to allow you to connect accessories (e.g. battery banks) to your Project Killswitch. The Universal Mount is comprised of two components (Lock and Plate). They can be assembled using two-part epoxy or…
Printed Enclosure Project for Prusa MK4/S - PrintClosure Info: External dimensions - 520x520x620 (XYZ) Internal dimensions - 490x580x490 (XYZ) Can be printed even on smaller footprint printers (like Prusa Mini). Uses printed pins and…
The included files are a mounting bracket for the Magcubic Projector HY300 PRO. All the models available did not work for me so i had to make my own. The features include Support free design Can print in 2 orientations (Flat and Standing)…
Further details about project can be found here . Project 376 "Yaroslavets" (Ярославец) is a Soviet and Russian riverboat. It was designed in 1953 and since then was manufactured in huge quantities. A lot of these ships are still used by…
I did not make this model, but I would have liked to. The movie is amazing and this print is also awesome.
This is a fully 3D Printed Stirling Engine made by New Zealand ProjectsToPrint (now defunct). It only requires a printer, printer materials and a few basic home tools and materials to make. It is powered by hot and cold water. This does…
An universal mount for Samsung Freestyle projector. It will be used for wall mount but it should work also for ceiling mount. It is shaped to avoid limiting adjustment projector position. There are two 4 milimeter holes, to secure it on…
When doing electronic projects there always is the search for a housing. There are plenty on the market but rarely fit the exact size and usually can not be considered cheap for some molded plastics. In addition much mechanical work needs…
3D Model Print Instructions Rocky Action Figure Instructions This model includes 2 figure style option: ● Articulated Action Figure (1 body and 11 limb pieces) ● Statue (1 static posed figure) Both model styles include two file options :…
The Microjig Matchfit system is endlessly useful for custom jigs, storage, organization, etc, but the bits and knobs are on the expensive side. I modeled and tested a number of variations to land on these, which are fully compatible with…
![Magnet vehicle [UFO] - school project](https://media.printables.com/media/prints/510283/images/4135830_5b1d54d2-52ec-488a-baf5-14cae22a5c8f/img_0412.jpeg)
![Modular Display Stand for LEGO Star Wars / DC / City [Main Project]](https://media.printables.com/media/prints/267597/images/8102146_4a778b8f-e3b6-4ded-82a1-d47a535d9e47_03546910-d95f-4a36-8f71-1214f98a583e/cover.jpg)
