Counting matching models…
UPDATE: Some people have had trouble with weak screws, so I've uploaded new files for the screws, made to be printed horizontally for stronger layer lines. Most printers could print the regular screws just fine, but if they seem weak…
Print approx. €3.14–€3.84 excl. taxPreliminary estimate for one variant
A basic model for quick and repeated printing. Key attribute is the blade which has been blunted so kids can play safely. Printed on a MK3S+ at 0.2mm quality, PLA, no supports, and 15% infill.
Print approx. €0.75–€0.91 excl. taxPreliminary estimate for one variant
This is a set of models to grow cat grass hydroponically in a standard or wide mouth canning jar. Want to keep your new cat grass upright, despite your cat's best efforts? Check out this companion print - Base for a Canning Jar…
If you want to practice throwing cards, then this is the best thing you can print, the plastic is much stronger than your ordinary playing cards and will not get destroyed as quickly. Its the best solution in my opinion to learn how to…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
You are welcome to decide the name of this print, I frankly don't have a clue. I recommend printing slowly for the best quality. Also, add painted supports to cradle the bottom and the ceiling of the middle of the part to avoid a print…
Growing Pot - Quick Release - Vase Mode Minimal material, maximum growth: easy-to-print growing pots in various sizes. To remove the plant, simply press the bottom slightly. My girlfriend uses these growing pots, from tiny seeds to…
All models are designed to print without supports. You can print on smaller printers like the Prusa Mini. Everything is made to fit on an 18x18 print plate. For the tray, you can choose between a low or high version. The lower one is for…
Print approx. €0.46–€0.57 excl. taxPreliminary estimate for one variant
Idee: In unserer Dummy-Trainingsgruppe werden an einem normalen Trainingstag etwa 40 Dummys von 8 Besitzern verwendet. Am Ende werden die dann untereinander wieder getauscht. Das dauert sehr lange, daher wurde eine farbliche…
Print approx. €0.95–€1.16 excl. taxPreliminary estimate for one variant
Turned the famous picture of a german soldier on the eastern front throwing a stielhandgranate into a lithophane
Print approx. €1.05–€1.28 excl. taxPreliminary estimate for one variant
With the apparatus it is possible to make very well audible that a horizontally thrown ball and a free falling ball hit the ground at the same time. The device is also very suitable for measuring the fall time with PhyPhox and the…
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for PETGSource material: PET
Benchy remix
Print approx. €1.13–€1.38 excl. taxPreliminary estimate for one variant
Spoon-Fork-Knife Throwing Star for an Our Generation doll (18-in/46-cm doll). Held by fingers in three different orientations. Can be held by either hand. For your aspiring young ninja. Doll can use it to eat, poke her forehead, comb her…
Print approx. €0.52–€0.64 excl. taxPreliminary estimate for one variant
Used to germinate seeds or as hydroponic pot Measures : h 4,5 cm/1,77in ; w/l 3,7cm/1,45in Fully biodegradable if printed in PLA The sides can be easily broken by you or the plant to facility the roots growing Printing: Temp : 190-200°C…
The gcode file uses a 0.6mm nozzle and 0.5mm layer height.
Print approx. €2.38–€2.90 excl. taxPreliminary estimate for PETGSource material: PET
The rowing machine I have creates fine dust from friction at the elbow that drops to and stains the carpet. I made this snap fit cover that fits over the nut and bolt to contain that dust. I printed it in PETG because that's what my…
Print approx. €3.81–€4.65 excl. taxPreliminary estimate for PETGSource material: PET
The source marked this model as adult content.
Girlfriend needed a throwing knife for cosplaying so this s the result of a that Slice at 0.1mm First layer 0.3mm will give the edge a shiny surface (if you print in 2 pieces) Good scale is at 180% - scale depending on need/build size
A hydroponic growing lid designed for plant propagation, rooting cuttings, and simple water-based growing. The lid holds multiple small growing baskets above a glass, jar, or container, allowing plant stems and roots to stay supported…
hello friends, I'm Vlad-3d designer from Ukraine , I got this idea and I really want to implement it, first of all, this product is aimed at premium materials and I want to implement it as a final product, but I will also share the final…
This is 1:1 replica of JKR523 throwing knife. Original is full metal, but in my opinion 3d printed works just fine. Remember that throwing knives requires lot of practice to master, so don't give up after few tries.
FEATURES Previously known as Advanced Nozzle Wiper, this is not just a simple wiper mount - it is a complete rewrite of the nozzle wiper code, with the following features: Adds advanced nozzle wiping functionality to Creality K1, K1C,…
This is to support a strawberry plant through growth. put each half around the core plant and as the strawberries start to grow they will rest on the support instead of the ground. Keeps a lot of ground-dwelling bugs off of the fruit as…
Earlier this year I got into growing sprouts. While living in my dorm room at college, I wanted a more convenient way to strain the water from the mason jar and came up with this print. It's a meshed strainer lid for wide mouth or regular…
The source marked this model as adult content.
These 3D models are faithful replicas of Shurikens, Ninja throwing stars, that can also be used as coasters. [ CAUTION! ] Please be careful not to injure others or yourself, as the shapes of the models are very sharp.
Use this ninja throwing knife to expand your ninja weapon collection.
knife for throwning i think that slim look better
The source marked this model as adult content.
Fun little throwing knife. Works great with 50% infill to give it some weight. Printed at .1mm to keep the detail, but works great at .2mm. Used a few drops of CA to glue together.
I was having a lot of fun with RAWICE511's throwing card, so I thought I'd bring it to Printables! It does make a whistling/whooshing sound when thrown right, but it takes practice. Printing in PETg or ABS is recommended since it has more…
Access pre-supported files & more by supporting me on Patreon!
Simple model of a microgreens planter with various extension like a stackable holder, lid, and sprouting tray. Everything was thoroughly print-optimized. The lid can optionally be separated in slicer and has a hole - for example, use the…
Simple Kit Card with 10cm, 6cm and mixed plant and growing plugs. Print and cut off. Label your favorite plants.
Follow me on Instagram or Twitter for weekly updates on free, high-quality designs like this. Get exclusive free designs, commercial licenses, and premium model plans on Thangs ! (affiliate link) This is a fun throwing toy with 4…
Print Settings Supports: No Layer Height: 0.2mm Infill: 15% --- Use variable layer height for best results on the blade. Finish with a black paint wash to highlight the design on the handle.
its a star, but it doesn't shine. It hurts.
A Family Friend is an avid Rower with an Olympic rowing boat for competitions and wanted a model of his boat, so here it is. Based on the Swift Racing 111-821 mould that he owns.
This is a ninja throwing star. Recommended slicer settings: 0.12 mm layer resolution, 3 walls.
Hop up chamber copy of Prowin with little improvements - longer protrusion for magazine 0,5 mm longer - wall where is thread from side is 0,2mm increased because printer cant print soo thin wall -wall of main tube in front of chamber unit…
Sehr stabile Version eines Hydro Tower's für 6 Pflanzen pro Modul, die Module incl. Bodenplatte werden untereinander mit Edelstahl Gewindestangen M6 verschraubt um der Konstruktion noch meht stabilität zu verleihen. Als Wasserbehälter…
Its a clasic throwing star / shuriken.
You want to use your smartphone on a Concept2 indoor rowing machine, and not ruin your posture while doing so? Now you can! As a rowing coach I did not like it when my rowers put their smartphone on the handlemount, because it makes them…
This was inspired by the Ranger's Apprentice stories by John Flanagan and the fan discussion here (https://flanagan.fandom.com/wiki/Flanagan_Wiki). I wanted to keep it simple and safe for those younger apprentices. The throwing knife has…
A model of the Apex Legends throwing knife, made by me in Blender. There are low poly(unbeveled) versions of the model, which are my recommended method for editing the model, I.E. for a remix. There are also beveled versions, meant to be…
Its a throwing star / Shuriken with 6 prongs.
A pack of 3 types of throwing axes. I call the 3 types WoodCutterAxe, BattleAxe, and IcePickAxe.
This is a dangerous ninja star so be careful.
Inserto oficial para el juego de mesa Growing Season (creado por Eric Rodriguez https://twitter.com/EricRod_LYV ) Inserto diseñado para albergar todos los componentes de Growing Season ordenados y seguros. Con espacio suficiente para…
Its a shuriken / throwing star with 3 prongs.
Welcome! After months of designing and testing, Stage one is complete, and our Smart Sprouts Indoor Growing System is ready! This is a fully 3d printed indoor solution for growing sprouts and greens. This design is hydroponic and does not…
I would recommend printing 2 of these and then using super glue to attach the two halves. I will also sometimes wind a strip of leather around the handle to give it a rap or I will tie paracord through the holes in the handle. DISCLAMER:…
Regular print setting 0,2 layer and no supports should be ok, but feel free to experiment This thing definitley has more lift than just a stone or ball… just give it some rotation and good angle :) Disclaimer: Should fit in all cd-dvd…
A quick Throwing Axe Prop I mocked up after going down the competitive axe throwing YouTube hole. It's made to print in two pieces without support. I've printed it with the following settings: .4mm nozzle .2mm layer height PETG 3…
Description This is the knife/throwing knife from the game Helldivers 2 Printing: Nozzle : 0.4 mm Layer height : 0.2 PLA supports needed
The design of this throwing axe is inspired by the Tomahawk from the first installment of the Call of Duty Black Ops series, released in 2010. The Tomahawk was made popular by the multiplayer game mode Sticks and Stones. I recommend…
Safer ninja star ig.. but be careful can still hurt someone
I've seen a lot of cool designs for pool noodle sword handles and have even designed a few myself. However, I believe that it is time that our poodle noodle weaponry diversify, and thus, I present Pool Noodle Throwing Stars. Aside from…
Bathtub toy easy to print and assemble, no glue, no support needed. The flag can be on a tooth pick or a piece of filament from the spool.
A pair of throwing stars with symbols from the Ninjago series. The ring around the throwing star is designed to protect against injury. Use at your own risk. Best printed in TPU!
this file is a ready to slice model. print with PLA or ABS. this is in beta stage. if you want to use paracord for the grip you will have to do it comment if you want me to show how.
Version one -'Z'. Version two -Fidget Spinner. Version three -Battle Damage. Help support my design work by visiting my referral links: Upland referral (virtual property trading game): https://r.upland.me/qk9X Unstoppable Domains…
Note: I am moving to Maker World, I don't have to time to make new uploads here too. Check it out for new models! https://makerworld.com/en/@gustav.ferdman Easy to print hydroponic basket in two parts, easy assembly. The part is printed…
I designed this simple throwing gauge. Initially, I started with an overengineered design but later simplified it. The gauge consists of a single part for all three arms (print x3). The base includes four slots for 20x3mm magnets, useful…
This throwing axe is a safe alternative to throwing actual steal blades. Meant to be thrown at a bristle board, like one you would throw plastic darts at but with longer bristles. Might upload a printable bristle board later, I may not.…
I've seen multiple supports for young plants, but I want a cheap and quick to print utility. This is my version. The ring have a diameter of 40mm, the slot for the stick 3,5mm. I've printed this support tool with PETG because this is more…
With over 50 designs, there are most of the popular and useful Amiibo coins here, ready to add your NFC215 tag. These can be used on any device that supports Amiibos, from Wii U, 2DS and 3DS to Switch. Much easier to carry on the go, and…
This model will hold a large sized cellphone horizontally on top of a PM5 performance monitor. It can be modified easily using a hairdryer to clasp any size of cellphone - simply heat up the arch and bend to the desired size of phone.
Cress Farm with two trays so you can enjoy cress/sprouts nearly every day via succession planting. Note : - Farm requires 1 bottom and 2 top pieces - Use food-safe filaments - Change the water in planter regularly - Clean the farm…
Simple kit card with plant plugs with a large writing field and holders for the seed bags. Print and cut off. Label your favorite plants.
WW1 British soldier throwing a grenade. Scaled to toy soldier size. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to print it with filament, use a smaller nozzle and…
This is an adaptation of a traditional tool for wheelthrowing called tombo sticks. They're for making consistently sized pieces in production settings or for sets that require precision like nested bowls. You can also adjust the…
Fill up the mason jar. Screw the Mason_Jar_Adapter onto the mason jar. Turn the jar upside down and slide into the Mason_Jar_Adapter_Stand. Water Level will be maintained. Print Parameters: 100% infill 0.2 mm layer thickness Material is…
made this for my helldiver cosplay Category: Props
They aren't called burrowers for their swimming ability. These set of models features an individual popping out of a tunnel, another diving back in and an empty tunnel token. Each stands on a 30mm base, and is to scale with the other…
Good quality throwing knives mainly for adults. Please leave reports and problem so we can all help each other out, Than
Print in PETG rather than PLA. When throwing this around and banging into things, the softness from PETG is less likely to break. Or print the file without wave in TPU. Print at any layer height. Set infill to 100%. Set seem location to…
Glider SWAN Small throwing glider with size 135x90x20 mm printed from one piece without supports. The wing is made of only one layer, so you need to set the layer height to 0.10 mm. At the same time, it is good to set the fill to 100% for…
Its a strange shuriken / throwing star, for more stars chekc out my throwing star collection
This sprout growing jar strainer is designed to be printed in one piece with all functions: 1 - No need to open to fill it with the water, just turn it back. 2 - After pouring, it does not drip onto the table but only into the included…
Been on wanting some Berserk props, so modeled this up Category: Props
This a model of a typical German rowing boat . It is intended as a model on a RC boat. You can downsize it to about 4cm. The platforms are from mahonie wood veneer and cut with a laser engraver.
This model is compatible with the lego system.
3D-printed Throwing Star patterned after a stainless steel one... (steel one shown in one of the photos). Unassociated tags: prop, toy, karate shuriken, karate star, karate tool, karate weapon, kid shuriken, ninja star, throwing star My…
I created this model for my cosplay of Altair from the game Assassin's Creed. print parameters: PET-G material, infill 25%, perimeters 5
Inspired by Banshee Advanced Throwing Cards by Rick Smith Jr. Slice it with 0.2mm layer height and there should be two layers. The holes are supposed to make a whistling noise when you throw it but it didn't work for me. (Maybe you have…
This is throwing star. this project uses little filament! for people over 5+
Throwing stick, bellying rib, throwing rib for bellying out when throwing pots
Here's my take on the Burrowing Blade monster from Frosthaven! This guy's a bit tricky to print, with all of those spindly legs and spikes, but I mitigated that wherever possible. I've included two versions of the model: one is just the…
The model is just one half of a full throwing star, you may leave it that way or print 2 copies and join both of them. I personally like the model as it is. Please be careful not to throw this at people or animals, it may be plastic but…
Do you want to practice knife throwing or just have fun and spin a knife around your fingers. You can also use it as a decoration for costplay. Then this training knife is just right for you!
The original holder from Gizzmo11n940 is absolutely great. Unfortunately it was too small for my iPad 12.9 and my phone with case. Therefore, I adapted the holder for larger tablets and larger phones (even with cases). I use it every time…
Self-watering planter for growing seedlings. Modify the capillary mat according to the drawing Place the capillary mat under the planters and lay it on the grid Rockwool cubes sized 40 × 40 × 40 mm are used in the planters The water level…
Inspired by Banshee Advanced Throwing Cards by Rick Smith Jr. Do not throw it to people! (And yes, it can rip through paper) Also, Don't throw it to a wall cause it could break! (3rd picture) There are two versions and the thinner version…
3x3x3 grid 2,5" / 5cm basket holder for hydroponic growing. Use in the nursery for seedlings and rooting before putting into the system. Possible to have water under for the roots to grow long enough for the main system. Construction is…
A very light yet strong card, that includes an aerofoil which generates asymmetrical lift, which in turn makes the cards glide in spirals, with greater accuracy. Just a couple of grams to print a bunch, and very fun to throw! They are…
