Counting matching models…
Learn Guide https://learn.adafruit.com/lightsaber-rp2040/ Adafruit RP2040 PropMaker Feather https://www.adafruit.com/product/5768 RG LED Button https://www.adafruit.com/product/3350 Mini Skinny NeoPixel Strip…
This is a super slim case for the Waveshare RP2040 Zero. Just enough to protect without bulk. Hope you Like it! I wanted to have access to the buttons, USB C, and Neopixel but still protect it when I toss it in my work bag with other…
Designed to mount this type of bass shakers to your moza crp2 pedals. Comes in 2 parts so it can be printed with no supports. Assembly instructions: Unscrew the aluminum plate from the bass shaker. Glue the plate in the middle of the…
Case for Small RP2040 Boards This is a case for the small RP2040 boards such as the Adafruit QT PY RP2040 or the Seeed XIAO RP2040. These small boards based on the Raspberry Pi RP2040 microcontroller. They have a USB interface and are…
Case for the Waveshare RP2040 MCU Board 1.28" LCD screen. This case will hold a 350mah Battery (602030). I have included the code for the watch face. I am not a coder, so please dont rip me apart :) I used a combination of a bunch of…
A case that I built specifically for the OGX-Mini / Joypad OS projects, but it actually works for any usage you may have for the Waveshare RP2350-USB-A board. The model is built with very tight tolerances, so depending on your printer you…
This a two piece 3D printable case for the Raspberry Pi RP2040 based 1.28-inch watch available for $35.50 from Tindie here and also available from AliExpress here . For best results print using a SLA (Stereolithography) resin based…
Adapter to use the easier to find CR123A batteries in place of a CRP2 battery. Printed in PLA on a Prusa Mini with .2mm layer height and 20% infill. Bend a paperclip as shown to make a connection. Tested to work in my older Nikon N6006…
Small press fit case for the Waveshare RP2040 One version of the Raspberry Pi 2040, it also fits the RP2350 One version which is identical in dimensions. Since I mainly use it for PicoKeys so I don't solder to them, I use them as a USB…
This model is a remix of @PatvdLeer's model, which fits the RP2350 USB.
*this is for the newer design cable for BTT SB2209 RP2040 Used to stiffen the can bus cable at the tool head side. **print with supports on the usb C part the long arm doesnt need it. print using PIF settings Use 2 zip ties please leave ⭐…
Hey, checkout the (much improved) v2 of this model here: https://www.printables.com/model/497020-picoprobe-rp2040-zero-case-v2
A dedicated case for the smallest usable RP2040 board I could find. It has labels for pins used by Picoprobe and a separate hole for each cable to prevent tangling. It screws together with (up to) 4 M3 14mm screws (and nuts). The project…
Description This is a scale model of the Seeed Studio XIAO RP2040, a board powered by the Raspberry Pi RP2040 chip with various useful functionality and costs $5.40. The product page for this device can be found here . It is intended for…
Resonance probe for input shaper calibration for the Klipper firmware based on a RP2040 Zero and a generic ADXL 345 Sensor SPI breakout board.. Wiring: RP2040 ADXL 345 GPIO 0 SDO GPIO 1 CS GPIO 2 SCL GPIO 3 SDA GND GND 3.3V VCC…
I am using this EBB SB2209 RP2040 can board from biqu and I noticed the driver tends to heat even when not using a door cover at all. the chamber was also open. NOTE: I didn't tested this. I eventually installed a g2e
Pretty useless but fun project ;-) Fits a ESP32-S3-Zero / RP2040-Zero and a 0.96" OLED. The MCU is fastened with hot glue, the bezel and foot using CA glue or similar. The new version also fits a piezo buzzer soldered to the MCU. UPDATE…
Love the original (a very simple case for the RP2040-Zero) and just wanted a small change.
Case for chinese USB dongle RP2350 (Raspberry Pi PICO2) from Tenstar Robot. PAY ATTENTION TO BOOT/RESET BUTTONS LOCATION before printing. I had to design this case because this particular PCB is not compatible with other RP2350 and RP2040…
Features: Designed for Cherry MX compatible switches. LED Window to leverage the built-in RP2040 neopixel RGB LED. No screws! Mechanical peg holders for the RP2040. Snap cover. USB port access hole on the back of the macropad. Cute and…
RP2040 + cc1101 in one chassis. The device is working with cc1101-tool firmware from github my fork: https://github.com/McGr3g0r/cc1101-tool my new tool: https://github.com/McGr3g0r/cc1101-wizzard most recent FW+apk:…
If you are using a BTT SB2209 toolboard, you will also have to print their Stealthburner motor plate, as it provides more room for the toolboard. As such, they have made available a cover for this that fits perfectly with the new motor…
Features: Designed for Cherry MX compatible switches. LED Window to leverage the built-in RP2040 neopixel RGB LED. No screws! Mechanical peg holders for the RP2040. Snap cover. USB port access hole on the back of the macropad. 11 keys…
3D print an enclosure for the Feather RP2040 that snap fits together! No screws needed. The case features openings for the USB and STEMMA QT ports. The cover features built-in actuators for pressing the on-board boot and reset buttons.…
Make a DIY YubiKey for only $4. With this configuration, you can use the Picokey with both your PC and your phone. https://www.picokeys.com/pico-fido/ https://pt.aliexpress.com/item/1005008622261552.html…
Voron 2.4 Stealthburner cable door with fan for btt ebb rp2040 canbus to cooldown the driver and rp2040
A compact protective case specifically designed for using the Waveshare RP2350-One as a PicoKeys FIDO2/2FA security key . This case transforms your development board into a durable, everyday-carry USB security device. Key Features:…
This is a remix of the Arduino Nano 33 BLE sense box by cjake: https://www.thingiverse.com/thing:4801467 This should fit any of the newer Arduino Nano models that use microUSB. V0 & V1:…
This case for the Adafruit MacroPad is a snap fit enclosure and requires no additional hardware. Layer height 0.2 Should be sliced with “Detect Thin Walls” so the tips of the snap tabs do not make gaps in the side walls. If you are using…
This is a case for Adafruit's Feather RP2040 USB Host board. https://www.adafruit.com/product/5723 It uses M2x4 screws for attaching the board to the case and M2x8 flat head screws for keeping the top and bottom of the case together.
This is a remix of the Arduino Nano 33 BLE sense box by cjake. This should fit any of the newer Arduino Nano models that use microUSB. V0: Same as the original, except I separated the two parts into individual STL files. V1: Added tiny…
3d model and stl for mounting the waveshare RP2040-LCD-1.28 in the MSA Millennium voice amplifier port. Has a separate compartment for a battery. Uses 3 M2 heatset inserts and M2x12 countersunk screws to assemble. Use an o-ring to get a…
A frame to mount the ZuluSCSI Compact RP2040 (Homebrew kit) in a 3.5" floppy drive (fdd) bay. I'm not sure, what kind of fdd bay it is, I think it's IBM/PC. Please measure to hole distances for the screws to verify before printing: the…
This is for mounting a Sim magic P-HPR Neo to the Moza CRP2 pedal set. You will need some machine screws (Roughly 4mm in diameter) and nuts to match in order to mount as well as a M6 bolt and locking nut. I printed 2 at 20% infill with…
Update 05.01.2024 I have uploaded the Fusion 360 file including the original hilt and custom emitter and pommel. I wanted a more “classic” emitter for the lightsaber and was inspired by a few images I found online. I plan to use the prop…
3D Print a snap fit case for the Feather RP2040 Scorpio! This features mounting tabs and port openings for USB, battery, headers and more! Customize the design to make it fit your next LED project. Learn Guide…
BOM: 3x M3 Tool head: https://github.com/Armchair-Heavy-Industries/Xol-Toolhead Board: https://github.com/bigtreetech/EBB/tree/master
This remix is for common 3 hole cable chain whit heat set insert.
Its a model wiznet W5500-EVB-Pico
Housing for RP2040 Zero combined with an USB A connector. USB C cable goes into PC, keyboard (dongle) goes into USB A connector. More info here: https://github.com/jfedor2/hid-remapper
I teach a summer Star Wars class that culminates in every student building their own lightsaber. I didn't want every student making the same exact lightsaber, so I started deriving the original 3d models into mix-and-match alternatives,…
I needed a small case to play with new RP2040 designs. This housing allows access to the optional JST XH connectors and protects the interfaces from accidental contact. A double case allows debugging with a 2nd pico. Print with PETG in…
The blade holder when printed was loose on my Ultrasaber 24" blade so much there was a gap around the blade and the emitter would not tighten against the blade. I modified the original Blade_Holder STL as well as the Blade_Holder (Short)…
This is for the Adafruit MACROPAD RP2040. There are 3 items, the stand, the holder, and the rotary encoder cover. All is an easy print. There are no supports needed. Any material can be used. This is my version 3 of stand for the…
UPDATE v2: Got some other RP2040-Zero that did not stay in place so I updated the model to have screws that secure it. You will need: 3 pcs M3 nut 3 pcs M3x10 screw ---- I use this with pin headers on the RP2040-Zero and female pin…
example printed in creality petg use m3 screws. body is resistant to overtightening but avoid doing so to preserve part durability if you need help flashing or building firmware comment
Build a DIY footswitch USB controller using CircuitPython and QT Py RP2040. This uses a micro switch, micro-controller and 3D printed snap fit parts. This footswitch can be programmed with CircuitPython to make custom keyboard shortcuts,…
This is a remix of the excellent PicoKey Case (RP2350/RP2040) DIY YubiKey/Passkey . All credit for the original concept and base design goes to the author — I only adapted the top shell and trimmed everything I personally didn't need. Tip…
The Waveshare RP2040-Tiny boards and its clones are a pretty good option if you want to mod your Guitar Hero controller with the excellent Santroller firmware, they're fairly easy to work with and they have a separate USB-C daughterboard…
The XIAO RP2350 packs the power of the Raspberry Pi RP2350 (switchable architecture of dual Arm Cortex-M33 cores running at 150MHz with FPU, and dual open-hardware Hazard3 RISC‑V cores, enhanced security and encryption) into the classic…
This is a stand and rotary cover for the Adafruit MACROPAD RP2040 ( https://www.adafruit.com/product/5100 ) or ( https://www.adafruit.com/product/5128 ). This is an easy print with less material so that it's a fast print. On the bottom of…
My girlfriend requested a fidget toy. I designed a 4-switch mechanical macropad she loves and carries with her everywhere to click. I wasn’t satisfied with just a fidget, so I made room for an RP2040-Zero. It can be used as a pure clicker…
A remix of Paul Phillips' ADXL mount. However, it uses this particular ADXL345 combo unit from Mellow Labs: https://www.aliexpress.com/item/1005005486458306.html Bill Of Materials One Mellow RP2040/ADXL345 module - see AliExpress link…
Seeed Studio XIAO RP2040 is compatible with the Raspberry Pi RP2040 ecosystem as they share the same RP2040 chip. It supports multiple languages including C / MicroPython / CircuitPython. This will be a great tool for you to get started…
the screws are: 2 M2.2 or M2.5 x6 for plastic self tapping 4 M2.2 or M2.5 x8 for plastic self tapping nothing special to mount it, just put a dab of hot glue on the RP2040 as this part doesnt have hole to screw it for more info on wiring…
A lid to protect buttons and encoder while carrying the macropad in your backpack or pocket. Follow if you like it
This case specifically designed for RP2040 module from WeAct Studio. This is bit snug fit (extra 0.30 mm length and width applied to original datasheet specifications) and before printing make sure that z-seam is aligned properly. Else…
This is a mounting caddy for the RP2040 Advanced Breakout and Basic Breakout Boards. No need for heat-set inserts on this one, just use some M3 button top bolts around 10mm in length and screw directly into the PLA. The caddy is flat on…
I was looking for a good macro pad for video editing. I came across Zack Freedman's youtube and big wheel repo. I couldn't find a teensy in my project budget, so I updated the design to fit a generic/clone of the Pi Pico. I also hollowed…
Same model as before but with a hexagonal pattern cut out to allow for better airflow to the board
This is a case for the Waveshare RP2350-One. Both parts snap together to protect top and botton part of the RP2350-One. I used a needle nose pliers to press both parts together as it is a tight fit. printer settings: - Layer height: 0.1 -…
You can display graphics and images to an external monitor with the Feather RP2040 DVI. This Feather RP2040 has all the goodies you know and love plus digital video output that will work with any HDMI monitor or display. It features the…
This is a thing with 2 different stands, holder and rotary encoder cover for the Adafruit MACROPAD RP2040 ( https://www.adafruit.com/product/5100 ) or ( https://www.adafruit.com/product/5128 ). The difference with this design versus my…
Recommended infill: 10% (depending on infill type)
The bottom-left part of SiCK-68 keyboard modified to accept a Waveshare RP2040-Zero microcontroller . Has a snug opening for the USB-C port and the controller is fully constrained – you won't be able to wiggle it loose using a USB-C…
Small case for Waveshare RP2040-Zero (smaller brother of Raspberry Pi Pico) that allows using 2 accelerometers with Klipper - speeds up resonance measurement on bedslinger printers. Needs M2.5x8 countersunk screw and nut. Place for 2…
You can build your own Adabot with Adafruit’s RP2040 PropMaker Feather! This is a fully 3D printed toy robot that features a servo-controlled head, sound effects and NeoPixel LEDs. Get Adafruit RP2040 PropMaker Feather…
I've been wanting a USB-C female FIDO2 key, but apparently nobody makes them and the only ones that exist are products like Trezor, which somewhat defeats the purpose of having an inexpensive device. Managed to create a case that serves…
Mount for a FYSETC Portable Input Shaper on a Prusa MK3s Bear extruder ( BearExxa ) and bed. It should fit an MK2 or MK3 just fine, the extruder mount is very simple. You will need to pause the print a dozen or so layers in to add the…
Remix of RP2350 USB Dongle Case to allow hanging it from a keychain
Es werden noch 2 Schlosserscheiben für M3 und eine M3x30mm DIN912 benötigt. Die zwei Schlosserscheiben werden mit einem leichten Fett oder Ölfilm belegt und zwischen Halter und Fahne montiert um ein reiben von Kunststoff auf Kunststoff zu…
Macropad with RP2040 and CircuitPython See HERE for a write-up on my website with pictures Most DIY macropads I could find on the internet were either too expensive or had too many features for my needs (knobs, displays, etc). My goals…
Snap fit case for the Adafruit RP2040 CAN Bus Feather with MCP2515 CAN Controller - STEMMA QT: https://www.adafruit.com/product/5724 .
After buying and installing my SB2209 RP2040 onto my extruder, I realized that the cable cover didn't close. I tried to look everywhere but couldn't find an official version provided by BTT even though it is shown in the instruction…
I wanted a case for my DualSense dongle, so I modeled it up with inspiration from the other models already made. Both BOOT and RESET buttons are available to press, with the BOOT button marked differently by a small indent. Get the USB-A…
# Last Updated: 25SEP24 3D printed parts for the OSUMGP-RP2040 by NickGuyver. https://github.com/NickGuyver/OSUMGP-RP2040 RECOMMENDED SLICER SETTINGS The orientation of each part is essential to proper fit/function. Please reference the…
RP2040 Zero Holder for the Adafruit MIDI Foot Pedal
Use sensorless homing in your own projects! In this project and associate video I’ll show you how to set up sensorless homing using a TMC2209 stepper driver — no mechanical limit switches required! Perfect for 3D printers, CNC machines,…
Easy to print protective shell for a RP2040 USB device. (https://www.aliexpress.com/item/1005006710298380.html) 3 versions of the cover, with holes, only connector and a blanc version Print flat, snap together
File Use Please respect my work by using these 3D models solely for personal, non-commercial purposes. Unauthorized copying, selling, trading, or any form of redistribution is strictly prohibited. Do not modify, share, or profit from…
Intended for waveshare rp2350-one/rp2040-one boards used as security key (picofido). Only one button is available when extended, can not be pressed when collapsed. Protects exposed usb header while allowing proper insertion of pcb in…
Replacement pedal faces for the second-generation Moza SRP pedal set
I would suggest printing this with PETG. You don't need any brim or supports and it should print pretty easily.
A replacement blade holder to hold a Adafruit Jewel in place of the normal blade. Use 2x M2 heat set threaded inserts and 2x M2x6mm screws. Adafruit Jewel: https://www.adafruit.com/product/2226 Heat Sets:…
Backplate that mounts an rp2040-zero to the back of a chatpad. I connected the chatpad to the rp2040-zero over serial so I could use it as a small usb keyboard for projects. You can probably make the original screws work, but I used some…
I needed to have a “keyboard” to press F1 on boot on a headless PC I'm using as a server at home, so I wired this here together. The RP2040-Zero goes in the bottom part, and is held in place by two small wedges in the middle part. The…
As the project is incredibly fun for kids, I wanted to start bringing small upgrades to it. The most popular speakers that are commonly used in the lightsaber community are 28mm 3W (4Ohm ) , and with this small adapter this is an easy way…
This model is not intended for printing, but to help create other models that use this board as a controller. I've added all the essentials to help create models using this board: buttons, leds, terminals, connectors, etc.
This is a remix of Dennis_26861 's case for the Adafruit MacroPad to accomodate the MacroPad with the enclosure from Digikey. As per the original design it s a snap fit case. The top part is the same as the original design. Can be printed…
Print as shown on the picture for better tolerances. 4pcs countersink M3x20 4pcs M3 nuts 4pcs countersink M3.5 screws
3D Model of Xiao RP2040, Also is the 3D Model of other components in Xiao lineup like NRF52840 as they are the same size
I have added a cutout for can board plugs
The RP2040 Macro Pad is a customizable and programmable keypad built around the RP2040 microcontroller. It features a compact design with 9 mechanical keyboard switches. The project requires assembling components such as the RP2040…
Gamecube Picoboot RP2040-zero mount / holder Imho the best way to do the picoboot mod as you can access the RP2040's USB from the rear panel. It is superglued onto the PCB (DOL-001). You need to trim the upper shield and remove a bit of…
Hardware needed : x4 12-14mm M2 screws to secure bottom plate x6 mechanical switches of your choice x1 RP2040-Zero microcontroller x1 8-bit RGB LED x4 10mm rubber pad 30AWG Wrapping Wire Solder iron Transparent Double Sided Polyester Tape…
Build your own FIDO2 passkey using the https://www.picokeys.com/ - https://github.com/polhenarejos/pico-fido firmware and enclosing it in this rugged and small case. ❗IMPORTANT: You need to adjust print settings, otherwise the print will…
Simple low profile and small macro pad. Uses a RP2040-Zero and a Kailh Low Profile Choc White together with two cables and some dab of hot glue. Be careful on the picture, I solder the black cable at the 5V pad instead of the GND pad.…
### A small macropad programmed using arduino featuring programmable key sets, a knob and an oled screed ## Features - Xiao rp2040 microcontroller - Cherry mx keys - An oled screen displaying the shortcuts set - A clickable rotary encoder…
Stream Cheap with 3x2 Keys remixed to support the RP2040 Zero instead of an Arduino.
The red model. White is original. Orient to print as shown in the photos. Use supports on build plate. Here printed in PolyLite ASA.
