Counting matching models…
This is a filament drybox for a single spool based on a cereal box. It does not require any desiccant but leverages a Rosahl electric dehumidifier membrane. The original cover plug of the cereal box is replaced by a 3D printed plug which…
I've been working from home for over a year and felt my PC desktop audio system needed an upgrade. These full range speaker are based on the Dayton Audio RS100-4, 4 inch driver. I 3d printed the cabinet shown here in PLA and I've now…
This is my design for VRS10 TDC mod. Guide: Arrow facing to the front, be fixed to the barrel with the 3mm screw, use a 3.5mm drill TDC Arm: Insert the M3 threaded insert in the body, the body may need a little sanding for perfect fit,…
This is a simple mount to fit a Tacktick / Raymarine T060 to the bow of a RS100. I used some 3M VHB tape to mount the bracket to the RS100. The mounting bracket can be fixed with 4x M4x6 flat head screws. Threads are already in place.…
Soporte para ROUTER MIKROTIK CRS125-24G-1S-2HND, para montar en rack de 19"
Bassreflexgehäuse abgestimmt auf ein Dayton Audio RS100-4 4inch Chassis. Maße 166x178x266mm Das fertige Gehäuse besteht aus zwei Teilen. Beide Teile können an einem Stück gedruckt werden. Supports werden beim Gehäusekörper benötigt.…
The brand you know now available to print yourself. I suggest printing walls two layers thick at 0.6 or three layers thick at 0.4. NOT printable on MK3 I3 , or Ender3 -Large model Strongly suggest using a strong PLA: Prusa Blend, CC3D…
The wall transmitters for my roller shutters were flying around for a long time. I like to be flexible, so I did not like to use screws to attach the wall transmitters. Also, that's why the adapter is in two parts. There is a carrier…
This is a remix from David's version that removes the letters, slightly speeds up printing and removes the need for supports. I tapped the holes in the side of the front to M3 and used short M3 bolts to screw the rachmounts to the switch.
With this case, you can mount a Rasperry Pi 4 with two RTL-SDR Sticks and some fans for cooling Part List: 1x Raspberry Pi4 1x 5V Power Supply USB-C (the original one works good) 2x RTL-SDR V3 2x USB Cable (50cm) 1x Noctua NF-A4x10 X…
This is a full range speaker for the Dayton Audio RS100-4 chassis from their reference range, popular due to low distortion and linearity. Sound pressure level is in the lower range with 83dBA, but the Re of 4 Ohm makes it easier for the…
Update 2026-02-27: A successor project with label area is now available here Naming Scheme Multiple Inlays for the sorting boxes NORS14 by kistenberg (avail @amazon.de) ready to print. This release contains a set of basic boxes with the…
I made a waterpump for my Aprilia RS125 Racebike. It has a groundplate for better flow and more stability. I printed it out of very well dried nylon. (Easynylon from Overture) printed slowly with a ,6 nozzle. I tested it on my racebike…
A 1:100 scale model of ABL Space's RS1 launch vehicle. This model has been printed at 1:110 scale with no issues and without the use of support material. Please enjoy and share any makes!
Designed to be printed with supports. I recommend enabling ironing on the topmost layer. The adapter plate snaps into the frame with little force, making a rock solid connection. While searching, it appears this remote/dimmer is now…
So this is a side view of my Aprilia RS125 racebike. The backwheel spokes are in the backwards direction, because my racebike has a honda wheel in backwards :)
Mount for the Vakaros Atals 2 you need 2 M4 Heat inserts like these: https://cnckitchen.store/de/products/gewindeeinsatz-threaded-insert-m4-standard-50-stk-pcs also you need some duple sided tape for mounting it to the RS100 Print…
Non c'è molto da dire... per montarlo serve una vite M4x30 MATERIALE: ECO-SMART PRINTOLOGIST
These were designed to fit the PRS1V4 & BB10 Kit towers Parts should be printed solid in TPU for best results. The front guard mounts using holes in the tower and the rear guard uses zip ties.
Diesen Öltankdeckel habe ich entworfen, da der originale bei mir nach der Zeit etwas zu locker sitzt und immer abfällt. Es ist eine simple Konstruktion und sitzt etwas enger als der originale, sodass er nicht so leicht verloren geht. Der…
Passend für Aprilia AF1 Futura/SportPro sowie Aprilia RS125 Federgabeln. Der Schutz ist Konstruiert um die Federgabel für den Service in den Schraubstock zu spannen ohne sie zu verformen oder zu beschädigen. Es passt perfekt auf die Gabel…
About This project is the successor to my older project . I've redesigned all models from scratch, adjusted tolerances and added a label area for printed labels of up to 9mm height. What's new? There a new inlays with a two-cell width for…
Imported from my designs on Thingiverse. Original upload was 21.01.2019 (dd.mm.yyyy) Lego Audi RS1 Concept Fan style RIM Layerheight: 0.2-0.3 Infill: 20% Wall Line Count: 6 Support: Yes
I used .15mm layer height and 40% gyroid infill to make this print. Printed on Mini using PLA Pro. The router will fit into the nest and hold firmly. Free my models 021881f0
While searching for a inlay system for my Kistenberg Nors14 organizers I stumbled over this genius model collection here: https://www.printables.com/model/1013012-inlays-for-the-kistenberg-nors14/files THX @chris_2point0 !!! Great work,…
This is to hold the Xiaomi temperature/humidity sensor with a display. Auto generated tree supports may be nice for the small tabs and the breather holes. Guide to convert it from Bluetooth to Zigbee:…
I created a customized Dummy 13 version inspired by a young relative of mine. To achieve this, I combined parts from the original Dummy 13 , some Smooth Armor components, and the legs from the Dummy 13 Horse to adjust the proportions and…
Es handelt sich um eine Nachbildung des klassischen Gummipuffers als 3D-Modell. Material: Zwingend TPU verwenden (kein PLA/PETG!).
Deutsch: Um die 14 Grad Schräge am Hermle C22 Leitrechner auszugleichen, habe ich dieses Mausablage hier erstellt. Dadruch wir die Ergonomie erhört. Damit es besser hält braucht man 6 Magneten 10mmx3mm. Am besten funktioniert es mit einem…
I scoured all the major model sites for bit holder for my beloved Bosch PS21 Driver. I printed out a bunch, but many were not the same drill model, or required magnets to be glued during the printer or after. The original model that this…
This flip-top case is modeled to fit the Panasonic ES-RS10 Razor. The body prints with a bridge that needs a little support, but I've added that right in the model so that you don't have to mess with it in the slicer.
Models: emax_motor_wrench_v1.0r.stl -----> standard wrench for rs2205/rs2306 emax_motor_wrench_motor_guard_v1.0r.stl ----> same as #1 but for people who have motor guards and cannot fit the standard wrench…
m a beginner, new covers for my KlötzchenART modular mold. create your own silicone mold for doing fine decorations and artwork. the new patterns are “fingerprint” and “shrapnels” you only have to glue the pieces together. more will follow…
Just a cover to block the ligth of the buttons in the Meross MRS100. Just print as you want. I did it with a 0,3 layer. Is just a square with some walls hahaha.
The Berker K1 frames have a special rectangular format. Standard Berker adapter frames for 55mm square switches don't fit with the Meross switch cover. Therefore I needed to design a custom switch cover. The cover snaps perfectly into the…
Bike parts: I made it for an RS125, but it works for almost any bike with M5 bar ends. I 3D-printed it for prototyping, but the final version was made in metal. Be very careful if you ride with the plastic version on the road. I’m not a…
Modified for RS1221RP+
Update 2026-02-27: A successor project with label area is now available here Naming Scheme Multiple Inlays for the sorting boxes NORS14 by kistenberg (avail @amazon.de) ready to print. This release contains a set of basic boxes with the…
The Berker K1 frames have a special rectangular format. Standard Berker adapter frames for 55mm square switches don't fit with the Meross switch cover. Therefore I needed to design a custom switch cover. The cover snaps perfectly into the…
About This project is the successor to my older project . I've redesigned all models from scratch, adjusted tolerances and added a label area for printed labels of up to 9mm height. What's new? There a new inlays with a two-cell width for…
This is a full range speaker for the Dayton Audio RS100-4 chassis from their reference range, popular due to low distortion and linearity. Sound pressure level is in the lower range with 83dBA, but the Re of 4 Ohm makes it easier for the…
Einfach zu Drucken und mit genug Belüftung. Wurde mit Petg gedruckt und mit M3x8 verschraubt.
I needed a new power supply for my laser engraver and could not find one ready to go. However a Meanwell 24v 6.5A LRS150 was a perfect fit. Could not find a full enclosure however and as I have kids around wanted it to be a little more…
Dewenwils HRS101L Remote Holder, for the remote plug system. I use these on my 3D Printers to easily turn on and off power without reaching around or moving things to accommodate a compete power down.…
Needed a holder for my Duka Atuman RS1 so I decided to design one that allows me to open it without moving it on to the table. This works as I usually only need one bit and the screwdriver. It might be an overkill to use 8 HSW connector…
This bracket can be attached to a Meanwell LRS 100 power supply to place it on a DIN rail. The bracket has a snapping mechanism for easy removing from the rail.
I built the rook 2020 and wanted a way to enclose my PSU so I don't accidentally come in contact with any wires. I personally have it underneath so it doesn't stick out and take more space, but it can also be mounted to the sides. If you…
Nice Smooth doorstop, Will post updates and G-code. Will be trying a print of it in TPU and PLA to see how each works.
Rain Sensor wall mount for H Tronic RS-12 (1115275) Made with M3 threaded inserts (I used Ruthex RX-M3x5.7) Support needed for RainSensorRS12 Case v03-01.stl No support needed for RainSensorRS12 Case v03-02.stl If you appreciate my work…
DIN Rail mount for Meanwell LRS100 series power supplies. Required: 2x M3x6 socket or button head screws. Select mounting holes based on desired orientation, and offset position if needed. Built on top of DIN rail bracket from…
Quick Remix of the rear Solid Core piece to allow the usage of a Quick Release sling. I used a 12mm M3 nut and a bolt to hold the female piece in place. Depending on your print tolerances a hammer may be required to insert the female…
