Counting matching models…
Model To prevent fast dry out of your started silicone/acrylic cartouche print this cap and screw it onto your cartouche. The cap has a conic inside to close the opening better as just a plain cap. Printing instructions I used PLA but…
No brim or supports required. A set of finishing nozzle tips designed for silicone, caulk, sealants, adhesives, and similar cartridge-based materials. The nozzles screw directly onto standard cartridges and feature integrated finishing…
This cartridge nozzle set includes three different nozzle designs for 1K cartridges , allowing clean and controlled application of adhesives and sealants. The nozzles screw directly onto the cartridge and cover a range of use cases — from…
nozzles and cap for caulk, sealant, glue cartridges ( thread ∅15mm p=2.5 )
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
I printed mine in PLA, no support and in 0.20 mm
This pokeball switch gamecard holder is not only very nice display piece but is aswell very practical! It can hold up to 12 game cartridges. To print yourself one of these fancy pokeballs all you need is a 3d printer (obviously), White ,…
A model of a Nintendo switch cartridge with all the correct dimensions.
The silicone tube/cartridge/cartouche cap helps silicone is not drying after usage See also the version with protector for cartridge and applicator: https://www.printables.com/model/1135314-protector-for-silicone-cartridgecartouche-applicat
Simple stand to display and store 10 cartridges. Print in PLA etc, very easy print. Took 2:45hr on my Prusa Mini @0.25mm layers
Remix of the Bokoblin Chest with slots for 10 Nintendo Switch game cartridges
3D print your favourite electric truck for less then your pre-payment of the real thing you will have to wait for quite some time. All parts are printed without support. Wheels are spinning if you use the right parts, which are listed…
This is an almost entirely 3D-printed RC version of the CyberTruck. Once built, it has four-wheel drive and four-wheel steering which makes it extremely capable both on and off road. A video documenting and showing the car can be found…
This is the Bokoblin camp monster chest from Breath of the Wild. This is a remix of some pre-existing models. The main thing I changed was split the two seperate colors into individual parts so that it can be printed without MMU or…
High pressure nozzle to clean your pool filter cartridge from inside out. There are several commercial cartridge cleaners available. But all those just try to clean in the same direction as the dirt entered the filter. From the outside,…
Please heart, comment, and post makes! Seeing what you all use and how you use it makes it worth making more designs! V2 Update info at bottom: I've been wanting to print a case to hold Switch Cartridges anyway, but I decided rather than…
The case is based on my parameterized “ Rugged Box ” and holds Brother TZe label tape cartridges. I also made a stand/catch tray for the P-Touch P700 label printer . Support my work For non-Prusa parts and filaments, check out 3DJake (…
A switch cart holder that as you spin it, the games will pop up to make it easier to read and pull them out. I recommend printing the base in 0.12 layer height so that the ramp is as smooth as possible. A 608 skateboard bearing is…
To increase the safety of my dry training, I was looking to buy a couple of dummy rounds that I could use instead of actual blank cartridges. Accidental discharge can always happen, so I'd feel safer using dummies. Problem: The price. The…
Check the difference section at the bottom for feature list! I really liked the original model. Thanks FreddyZ! I started just wanting to make it easier to print, but feature creep got to me. But the result is good, and it was a good…
A functional Gameboy Advanced Cartridge. Modeled in OpenSCAD. Test fit in a GBA, GBA SP, and DS Lite with Mario Kart. Print with build plate supports.
Nozzle: 0.4mm Layer: 0.2 (Recommended) Scale it as you like :)
Tesla CyberTruck toy model prints with no support
Designed to fit universally on silicone sealant cartridges with an S15 × 2.5 thread , it is a simple and reusable solution for storing partially used cartridges. Features Helps prevent silicone from curing between uses Universal fit for…
When looking around for easy to print Nintendo switch cartridge holders, I would always run into issues with the cartridges being too tight and impossible to remove, the individual pieces not fitting together, ect. That is why I decided…
A stand for your SNES cartridges. This thing holds 5 games each and has a tight fit detachable faceplate. Not compatible with US cartridges, check the remixes for compatible versions. Print Settings: PLA or PETG your choice Infill 10% or…
No longer needing anything in Slot-1 of any of my Nintendo DSs, I wanted something stopping pocket lint from entering the device. This dummy cartridge does the trick. Category: Video Games
Could be useful for some cosplay. Modeled using publicly available dimensions. If you will print this model, please post a make. Thanks!
Here are some ammunition models of various caliber. They're good for props or demonstration purposes. Here are the calibers that I currently have: -.22 LR -7.62x25mm Tokarev -.32 ACP (.32 Auto) -.380 ACP (.380 Auto, 9mm Short) -9mm Para…
Need a place to put all of your Game Boy cartridges?! Are the 10,000 other Game Boy cartridge holders on Thingiverse just not what you're looking for? Then look no further! There are three variants: a large one that holds 12 carts, a…
This Fully Enclosed Open Source Cartridge Reader Shell (FEOS) is designed to be durable, well protected, and look stunning on your desk. The shell is a multi piece assembly, the shell base, the cover, battery and the faceplate. The “decoy…
No brim or supports required. Threaded nozzle tips designed for silicone, caulk, sealant, adhesive, and similar standard cartridges. The set includes multiple nozzle variants: Flat tip 45° angled tip The threaded base allows the tips to…
To be sure that the print stick to the bed I added a raft
I have improved the model to provide more realism. The changes are as follows: 1. Align the front screw holes with the rear opening. 2. The front bolts are now hexagonal in shape 3. A dividing line in the middle that simulates being able…
Giant Gameboy Cartridge Wall Art
Ein Verkauf ist strengstens untersagt! Leider muss ich sehen, dass mein Design oft geklaut oder kopiert wird. Ich habe viel Arbeit hier investiert und erwarte, dass die Lizenzregeln eingehalten werden! A sale is strictly prohibited!…
Correct geometry to a gameboy cartridge. No goofy overhangs and designed with 3D printing in mind. Part is oriented for printing. Just drop in your slicer and send it. Best if printed in ABS on a well calibrated machine.
The 5.45x39mm cartridge is a rimless bottlenecked intermediate cartridge that was introduced into service in 1974 by the Soviet Union for use with the new AK-74 rifle. The 5.45x39mm supplemented and then largely replaced the 7.62x39mm…
This versatile phone stand is designed to securely hold your smartphone in both portrait and landscape orientation. The geometry is fully optimized for support‑free 3D printing, ensuring clean results, shorter print times, and efficient…
The B-52 Stratofortress is an American long-range strategic bomber. The B-52 was put into service in 1955 and has remained in service for over 60 years. The USAF projects that it will serve another 30 years before it is retired. Since its…
This replacement cartridge bracket will let you play Japanese titles on your US N64. Simply disassemble your N64 and replace the existing cartridge slot bracket with this universal bracket. It’s that simple. Install Guide Updated design…
Printed with PLA. 0.2 layers. 3-4 walls. 30-99% infill. No supports. Top/Bottom pattern: Concentric Prints in 10-15 minutes.
General information This is my slightly modified version of this model on a different platform. Initial credit therefore goes to the original creator. I made the SD card slots tighter and removed one to make room for more Switch…
Bring back the magic of movie night — without the rewinding. This NFC-powered media player uses 3D-printed cartridges and ESPHome to trigger movies, playlists, or automations in Home Assistant. Just insert a cartridge, and your smart home…
Public domain model of a Boeing B 17 "Flying Fortress" by Helijah . Originally uploaded to Blend Swap .
This Silicone Tube/Cartridge Cap was born out of necessity when my brother asked for something to keep their silicone and sealant tubes from drying out during their construction project. The cap features rounded edges for a better grip…
Drew this up for a friend who wanted a cool case for his Nintendo Switch cartridges. designed with 3D printers in mind. I think this is a really cool combo. Which game are you playing next? ;) Hold’s up to 12 games! Assembly required. I…
I like how Ace_D remixed the Switch portrait holder with the comfortable grip. However after printing his design I found several issues. The right handle is largely separate from the center piece. The console fit is very tight. There is…
Update 25.07.2026 I've added stands of varying depths, from 2 to 12 cards. There's also a version with the Super Famicom logo. ___________________ Hello Everyone, At the request of two users I have prepared 3 new game stands for the NES,…
Compact Remix of my High pressure nozzle to clean your pool filter cartridge from inside out. There are several commercial cartridge cleaners available. But all those just try to clean in the same direction as the dirt entered the filter.…
This is an MMU print of the treasure chest from Breath of the Wild. It's printed in several parts for the best quality but that does mean some assembly required. A little bit of super glue is all you need but most of the parts can just…
Not my design, found on Thingiverse: https://www.thingiverse.com/thing:3346103 which is a remix of https://www.thingiverse.com/thing:1615753 // Edit: Not sure but might be the same as…
Description in English below Update 20.06.25 Kiste ohne Ausnehmungen hinzugefügt Update 08.05.25 Wieselburger Logos hinzugefügt Update 07.04.25 Griffe und Stopper für Montage mit Zylinderkopfschrauben M3x14 oder M3x15…
Cap for silicone cartridges or simlar, with S15x2.5 thread.
parts can be glued or screwed together, windows must be glued on to body, tires on the bed must glued to the body https://www.thingiverse.com/thing:4063298
Changes from Original: Nintendo GameBoy/GameBoy Color/GameBoy Advance: - Thicker Bottom: ~1.4mm Nintendo Entertainment System: - Thicker Bottom: ~1.4mm Super Nintendo Entertainment System (NTSC): - Thicker Bottom: ~1.4mm Super Nintendo…
Place your Switch dock in this model for a nice way to store and display your games. UPDATE: As I've accumulated a few more games, I needed to expand the cartridge storage. As a result, there are now two different models to choose from. A…
This is a simple bolt-action pen that utilizes the Pilot G2 ink cartridges. You can make it single-color, or add an accent strip in the middle. The halves connect with a bayonet latch, which should be easier to print than standard screw…
https://www.printables.com/model/1122014-tazne-zarizeni-rc-110-towing-device-110-rgt-rescue it is necessary to describe the parts when printing! Pneu https://a.aliexpress.com/_EQaJNvO PLA AURAPOL 25% infill 3 walls .02 layer height no…
I looked into the type of thread that was used for these types of tubes. Everything pointed to a S15x2.5 specification; which is a type of metric buttress thread profile. Seems to fit everything with the same tolerancing that store bought…
More than a year ago I printed a tf2 sentry (the red one in the pictures) and while it is really cool, having to glue everything was pretty tedious. Over time it also has completely fallen apart. After a lot of procrastination I've…
This is a remix of Milos V's rugged box designed to hold 25 rounds of 308 Winchester bullets. I reload bullets, and this is a nice way of keeping my precision ammo organized and ready for transport to the range. The bullets are held…
Based this model off of measurements of a real one. Designed this for a dust cover for your N64, or you could mock up some fake labels and make a real looking cartridge for display if you'd like. If you want the raw files for a project…
Update 2023-04-13: Updated dimensions to be more accurate to the original size I liked the original case I created last year, but it proved to be too fragile for my younger kids. Enter version 2. I removed the hinges, and, instead, made…
This hole project was made to challenge my ability whit SolidWorks This is a remix and complete redesign of this model https://www.thingiverse.com/thing:1615753 to make the design of inserts easier to be adapted to different situations In…
Easy to print with PLA and no supports. Size for Label: 32 mm height 22 mm width
Store 2 to 10 Nintendo games in a stack, so you can read the labels easily. I designed this in order to be able to print it on a small bed surface like the Prusa Mini: this is why you must print it upside down and not on its back.…
Printed lying on its face. 3 walls and 3 top/bottom. 15% grid infill. Very solid, but the pin version isn't great imo. For V2 you will need supports as shown in the photos.
A barrel-themed game holder with a wave-like display action. Includes a hidden second compartment that can be accessed by disassembly. Print No supports required. Moving parts require a sufficiently smooth surface to slide without…
To continue on my journey for a fully custom tattoo machine I made a cartridge grip holder to fit any traditional or rotary tattoo machine allowing it to be used with tattoo cartridges. I made a good few grip versions my favourite would…
The license for this design is non-commercial, no one may sell any version of this design with the exception of Interlock Printing. https://etsy.me/3fWIY4w Printed in a Wood PLA, still working out some of the kinks in the printer settings…
Print in ASA or ABS. 30% infill , no supports. Activated carbon can be purchased in kilos on the Internet and in aquarist supply shops. Edit- At your request , I have added a version with smaller mesh holes for the smaller 'Nevermore'…
Honeycomb Vape Pen Stand and Cartridge Storage These are pen holder stands for vape pens and cartridges. Standing the pens upright keeps the oil at the bottom where the heating coil is and it also seems to help reduce clogging. They're a…
18AUG22 Update - Uploaded .243 Win and 7.62x54R bushings 11NOV21 Update - I just uploaded the 6.5x55 Swedish and .22-250 Remington bushings. I've also uploaded a generic .dwg of how I design each of these bushings (6.5x55S is in this…
If you like the Design share some Love and leave a Like, Also you can Support with a little Donation on Paypal.me/maxter3D You can store around 40 Nintendo Switch Game Cardridges in this Carousel. The Games are popping up when the Castle…
This print-in-place module uses a compliant mechanism to hold in a wago 221. This wago is used to connect a 1/16" brass rod to a EDM power supply. 6x2 mm Neodymium magnets keep the module attached to an EDM machine. EDM Is a low-force…
She's as good as three unicorns! She might even poop three rainbows. Print her and find out! Gertrude is the 2025 update of my second Flexidino, Theobald , from 2023. I've completely rebuilt the model, especially the outdated joints. I've…
Re Upload from my thingiverse https://www.thingiverse.com/thing:4733946/files NOTE: Not all cartridges are built with the same width… do not force the cartridge. I noticed this when I was testing different games in the same printed NES…
The parts were modeled from a beat up Star Wars Racer cartridge using trusty rusty calipers. Different from original in these ways: There are M2 nuts and screws for the PCB and shielding. Use 2 standard M2 nuts and 2 M2 x 10mm screws…
OpenSCAD model to simply create a cap with a few measurements. 2025-12-24 update: I've added a replacement nozzle that can be screwed to the tube and a screwable cap to just close the tube without the nozzle. Of course you can buy…
I liked the idea and found nothing alike on thingiverse. so i made this EDIT: Some people are having issues with the cartridges falling out. i dont know why it works for some people and some dont. To avoid issues i added two test files.…
Minolta Camera 16mm Film Cartridge Printer: Bambu P1P Nozzle: 0.4 Profile: 0.12mm Fine @BBL P1P Filament: Overture PLA, Black Model must be printed using a 0.3mm wall width to insure that the fit tolerance is maintained.…
1:1 New 3DS compatible fake cartridge model. It does work with old 3DS too, however you need good accuracy otherwise the operation might not be smooth as the cartridge hook on o3DS is larger and could bind a bit. This was designed with…
Nintendo switch cartridge case, designed to fit in the Super Mario Odyssey carrying case. 2023-07-01 - Updated with new open back design to allow easier removal. Print Settings Printer: Kossel Delta Rafts: No Supports: No Resolution:…
This switch cartridge holder is the result of refining several designs and concepts I've come up with. My goal was to have a convenient, portable game cartridge holder that was as compact as possible for as many cards as possible. I also…
I wanted to print out all my favorite buildings of Paris for my youngest, but realized there wasn't a detailed enough version of Sacré Cœur, so I grabbed an architectural facade off Sketchup to get the layout right, then removed the photo…
Sealant/Silicon Cartridges Cap Print in pla in 0.25mm
I remixed the two cybertrucks designs by combining them together for a model that would work for my purposes. This model can be printed as orientated with no supports and the wheels will be able to turn. See more in my collection:…
Sealant cartridge cap to conserve your opened cartridges. Fits standard cartridges. Beveled flange and corners for a tighter seal and easier grip. Print upside-down due to the bottom bevel (or sink it into the bed when slicing). Works…
Check MouseBiteLabs for compatible reproduction PCBs and HondrusLabelShop for custom romhacks labels.
Visor Prop StarTrek Geordi Laforge Use 2 pieces 2 by 10 mm cylindrical magnets
Gillette Fusion Razor Travel Case with Blade Cartridge Storage This compact and practical case is designed to protect your Gillette Fusion razor during travel or everyday use. It closes securely to prevent accidental opening while…
Just a GameBoy cartridge. I've printed it out with perfect success. Let me know if you have any questions or suggestions. Enjoy. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: .2 Infill: 25%…
This is my make of a small model of the Tesla Cybertruck that I found at https://www.thingiverse.com/thing:3996654 . I created the .3mf files that are attached Print instructions I used rafts and supports and had a bit of an issue with…
Remix der Verschlusskappe für Silikon Kartuschen. Geändert habe ich die Aussenform, welche nun ohne Raft oder Support gedruckt werden kann. Außerdem habe ich den Gewindeansatz konisch gestaltet, da meine Kartuschen am Auslass alle konisch…
LEGO TESLA CYBERTRUCK 8x8
I really like my models to be scaled correctly so I sat next to my gaming cartridges using them as reference when making this. Updates: January 02, 2024 - Added v2 which has a cleaned up logo area. The original version had weird layers…
Need multiple SD cards for your Switch for loading games, homebrew/emuNAND, Android, etc? Store two micro SD cards directly in the game cartridge slot of your Switch. Print instructions Print with 0.1mm layers, then attach the top and…
Remix of https://www.thingiverse.com/thing:4268067 which is not currently available on Printables. Modified to hold a Teensy 4.1, two spare microSD cards, and with an added label recess that can be revealed by prying off the front plate .…
