Search results: s20

SAMSUNG GALAXY S20 FE / S20 FE 5G TPU CASE

Bottom is flat. Case is tested. Best printed slowly in TPU.

Honda S2000 kit card

Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…

Samsung Galaxy S20 FE Bumper Phone Case

I couldn't find any S20 FE phone cases online and decided to make my own. This design was made do be an improvement of my previous design linked below. The case once printed should easily pop onto your phone one corner at a time (ending…

SAMSUNG GALAXY S20+ (PLUS) TPU CASE

Bottom is flat. Case is tested. Best printed slowly in TPU.

Samsung Galaxy S20 FE Case

I made a case for the Samsung S20 FE wit a voronoi pattern. I have printed it with 0.2mm Layer height with an Ender 3

Samsung S20 FE Case Hexagon

Works fine with PLA or PETG

Samsung Galaxy S20 FE case - buttons and low-profile

Based on perfectly fit model by Kirk Valko [1]. I fixed only one disadvantage - buttons. I was not able to press volume buttons. Therefore instead of holes I created a buttons - they are easy to find by touch and really useful for…

Deutsche Bundesbahn Gls205 / Gms54 Guterwagen - Gauge 1 (1:32)

Deutsche Bundesbahn Guterwagen Gls205 / Gms54 in gauge 1 (1:32). I "borrowed" the roof-shape from the "French Wagon" by dagnall53: https://www.thingiverse.com/thing:2675325 The coupling is a modified version of raby's design:…

Phone amplifier passive amplifier - Galaxy S20 - Iphone XS

This is a remix from thing https://www.thingiverse.com/thing:1930492 I remixed it to fit my Galaxy S20 with a case on. It also fits an iPhone XS with a case on. The phone gap is now approx. 81mm x 13mm. It works really well. Print…

Samsung Galaxy S20 Cover 📱

Samsung Galaxy S20 Cover. This cover is for the standard S20 (151,7 x 69,1 x 7,9 mm), not the plus size version. Print it with PETG because it is more flexible than PLA and makes it easier to mount the cover on the smartphone Print Info:…

FN P90 & FS2000 Selector, Sear, Disconnect Extender, Ejection Switch

P90 and FS2000 parts Printing: All parts should be printed solid. PLA will not work for anything other than the selector switch. Nylon is the recommended material. You need to use a strong impact resistant material. Stay away from carbon…

Deutsche Bundesbahn Grs204 / Gmhs53 Guterwagen - Gauge 1 (1:32)

Minor adjustments to my previous design, the Deutsche Bundesbahn Gls205/Gms54 Guterwagen (https://www.printables.com/model/181948-deutsche-bundesbahn-gls205-gms54-guterwagen-gauge-) have resulted in this very similar Gmhs53. 11NOV2018:…

Samsung Galaxy S20+ g985 & g986 case

Originally published here: Samsung Galaxy S20+ g985 & g986 case by tato_713 - Thingiverse This case was designed for the Samsung S20+, including the 4G and 5G versions, but not the S20 nor any equivalent phone. Thanks to Thiago Almeida…

Mercedes-Benz AMG C63S (W205 / S205)

please follow us on instagram & tag us if you printed it: https://www.instagram.com/3dprintkings Print Settings recommended to do a color change by script at height 3.50mm and use a prime pillar Category: Keychains

Renault Clio MK3 RS200 Fog Duct Adapter 51mm

Printed in ABS+ small amount of tree supports needed 51mm Diameter end with anti slip ring. Donate now and make a difference in someone’s life!

Case for Samsung S20, S20 5g

I couldn't find any case for S20 so i made one. Might not be super pro but it works. I printed it in 0.1 with supports. Printer was sweating on these hexes. Hopefully someone will have a use of it.

PTS200 soldering iron rugged case

Case to keep the PTS200 USB-C soldering iron and a few of the most important accessories in a neat tiny package.

Opel Corsa F Smartphone S20 stand (Handyhalter)

Hello all, This is a new Version I want to share with you It is a Smartphone stand that is fitting for an Opel Corsa F and it is designed for a Samsung Galaxy S20FE, but I think it will also fit for many other phones as well. I have…

Atomstack Laser X20 A20 S20 Pro cable chain mount with screws and heatsets

The mounts are work in progress. I used a 10x20 cable chain to fit the cables and the hose of the air assist: https://www.amazon.de/dp/B08R1LFZTN?psc=1&ref=ppx_yo2ov_dt_b_product_details Used these belt clamps (one especially on the X…

FS2026 Rewinder adapter for 2025 Official Remix Base

I already printed a bunch of the The Ultimate Cereal Container Filament Drybox - Official Remix (2025) bases. I just want to add the rewinding feature to what I already have. Update V2: lower mounting slightly. See pictured 200mm spool;…

View Finder/Eyecup for Canon EOS2000D

The original viewfinder has the same clamping mechanism. I added a bevel on both sides to make it fit because the width of the viewfinder is a little sunken into the body. Printed with layer height of 0.15 (first layer 0.2) using tree…

SAMSUNG GALAXY S20 FE / S20 FE 5G improved TPU CASE

Xiaomi Vacuum-Mop Robot - Série 2S, P, Pro, S20, S12, S10EU

Side Brushes for the following robot vacuum models: Xiaomi Vacuum-Mop Robot - Series 2S, P, Pro, S20, S12, S10EU Part_1 PLA 0.2mm support: tree print in the position shown in the image Part_2 TPU 0.3mm support: tree print in the position…

Blocchi cuscinetti lineari - Linear bearings block SCS6UU - SCS8UU - SCS10UU - SCS12UU - SCS16UU - SCS20UU

Blocchi cuscinetti lineari SCS6UU - SCS8UU - SCS10UU - SCS12UU - SCS16UU - SCS20UU. Le misure dei modelli SCS_UU sono quelle più di uso comune, e si rferiscono alle misure dei modelli riportati in verde nel file SCS_UU_datasheet.pdf Le…

Cyberpunk Nokota Phonecase (samsung galaxy S20 FE)

Wanted a phonecase for my cyberpynk halloween costume. Case is made for a galaxy S20 FE, but f3d file is included for remixes. 15xm3 sqrews were used with 2xm5 heatinsert for antenna cable fitting. i also used two magnets to make the…

FS2026-rewinder-nut remix

Improved remix of the original spool rewinder.

S20 FE Phone Case v2

Phone case for Samsung S20FE thin design designed for TPU

NS20 "The Camel"

The Camel is the nickname of the Dutch diesel-electric motor coach NS 20, built in 1954 by the Rotterdam rolling stock factory Allan as a management coach for the Dutch Railways.[1] In addition to The Camel, it was also called the VIP Car.

Samsung S20+ Huelle

Flexible Hüle für Samsung Galaxy S20+ Flex TPU & PVA+ Print instructions War eigentlich nur einTest, wie TPU-Filament vom Prusa + MMU2 verarbeitet wird. Zuerst mit PVA (wasserlöslich) die Stütze drucken, danach neuer Druck der Hülle mit…

Samsung Galaxy S20 FE phone case

I printed this with TPU and I found it hard to put on the phone I would recommend flexible materials because I don't think if you printed it on nonflexible materials you would be able to fit it on the phone. there are no photos of the…

Samsung Galaxy s20 5G TPU Case

The photos I have are of a version I made with a hole in the back to make power share easier, but I lost the files for that one, attached are just the regular version with a solid back. Let me know how it works for you!

suction cup mount for DS18B20/DS18S20 temperature sensors (Aquarium)

This is an aquarium (or other glass surfaces) mount for temperatur sensors DS18B20 / DS18S20 (6x50mm). the sensor just snaps into the mount and there you go. you need two suction cups (small ones) like the EHEIM 6803…

1:28 Honda S2000 RC Car; Mini-Z compatible

1:28 Honda s2000; Mini-Z compatible I have remixed and put together this rc kit for the Honda s2000, along with an assembly video. Hopefully this will translate to an enjoyable print and assembly experience. Hardware Recommendations The…

Samsung S20 FE Case for Baseus magnetic holder PLA PETG

I don't like any patterns on the back as the dirt can get easily behind that so I have designed my model to be possible to print in PETG. There is a 0,6mm deep circle in the middle to accommodate a 0,4mm thin steel ring for Baseus…

Samsung Galaxy s20 ultra "life-proof" case

modeled the case to have 3 parts, similar to a lifeproof case. modeled with use of a mmu in mind. centre part tpu, front/back abs. printed the centre tpu part with ABS supports….print back with camera cover slider facing up with tree…

MS2000 Marker - Escape From Tarkov

M2000 Marker from escape from tarkov

Side Skirt Clips for is200 is300 Altezza Etc

Replica of the elusive OEM side skirt mounts. Based on some old forum posts and some trial and error. I recommend printing them in Nylon, you might get away with using PETG but wouldn't recommend ABS/ASA due to their brittleness. PLA is…

Cover / Protection Power supply Meanwell RSP/LRS200-24

Printed in ABS / ASA without support.

S2000 Oil Filter Socket (1/2" Drive)

REV 01: Original model. REV 02: Filter fit improved, deeper socket.

Tiny S2000 - Mini Cars Series

Honda S2000, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for better…

BMW F10 / F11 Phone Holder Anker PowerWave (Samsung S20 Plus with Spigen case)

I had an Anker PowerWave wireless charger A2503 lying around that I didn't need. That's why I developed this phone holder for my BMW F11 and Samsung S20 Plus in a Spigen Tough Armor case. I like the inductive charging. So the wireless…

Venom Smartphone Case for Samsung Galaxy S20 FE

Here is a Venom smartphone case for Samsung Galaxy S20 FE. Layer height: 0.2/0.3mm Filling: 100% No supports

Lexus IS200 IS300 Cupholder

Lexus IS200 IS300 Cupholder. Fits in the original glove compartment, no gluing required

Atomstack A20/S20/X20 mount with adjustment

mount with adjustment for Atomstack A20/S20/X20 model fill >= 50% for assembly with laser you need: mount x3 mount2 x1 m5 screw 12-15mm x4 m5 nut x4 5mm washer x8 (optional)

Case for ESP32-2432S208 Sunton Touch Display - USB-C

The display fits nice and can be screwed in with M3x6 screws. The base is a press fit and has 2 mounting holes. The base has to be rotated 90 degrees for printing. No supports needed. This model is for boards with both Micro-USB and…

AP2 S2000 Cupholder organizer

Got tired of having coins and everything fall into where the already bad cupholder is in my S2000 so made this little organizer.

Slim Magsafe Mount for Modify S2000

This is a mount that attaches to the Modifry S2000 mount Features - Slim mount, only 8mm thick - Easier line of sight by raising iPhone up 2.5 inches from center of mount - Phone can oriented in portrait or landscape - Fits MagSafe…

Viper S200s Flared Magwell V2

V2. Printed and test fit and working well.

CTEK / Noco Quick Connect mounting bracket (Universal / S2000)

This is a bracket to hold your CTEK or NOCO branded quick connector. This bracket makes it easy and convenient to connect and disconnect your battery tender. I also print these from my Etsy store and also have some S2000 specific brackets…

Case for ESP32-2432S208 Sunton Touch Display - Micro-USB only

The display fits nice and can be screwed in with M3x6 screws. The base is a press fit and has 2 mounting holes. The base has to be rotated 90 degrees for printing. No supports needed. This model is for micro-usb only boards. If you have a…

S20 FE 5G Case Hex 1mm

This is a case for S20 fe / fe 5g mobile. Its thickness is 1mm and can be printed in PLA. For better results print it in 0.15mm layer height. It is a 2-part assembly. The ring has to be placed in the area near the camera bump so that it…

Soporte pared para accesorios aspirador escoba Samsung VS20B75AGR1/WA Jet 75B

Soporte para colgar de la pared los accesorios de la aspiradora Samsung VS20B75AGR1/WA Jet 75B. Probado con todos los accesorios que venían con el aspirador, y encajan todos bien y quedan sujetos firmemente Dos agujeros para fijar en la…

Atomstack X20 A20 S20 Pro power supply mount

Print two. Screw them down with 4 screws.

Netgear GS205 Switch Wall Mount

Downloaded a mount and hated the print so I designed my own. Fits like a glove. If your printer isn't finely tuned, I'd probably experiment with 101-102% scale printing. I just printed it at 2 shells and 10% infill using Prusament PLA…

Laffly S20 TL easy print

Come support these models over on Patreon Buy my time, Not my models. Easy to print S20TL french truck, 1/100 scale, will want some greebling if scaled up. Some details have been changed for looks/ printability. the MG mounts are in a few…

LEGO Honda S2000 Naruto

LEGO Honda S2000 Naruto

Samsung S20FE Phonecase

Samsung S20FE Phonecase Lil Ugly, but lovely

Tapo Button S200B/S200D Baseplate

To retrofit my old light installation i wanted to use the Tapo smart button as a light switch replacement, but i didn't want to remove the original light switches. So i made this light switch cover/base plate which will hold the button…

Fanatec CSL DD Smartphone Dashboard for iPhone 14 and S20

When discovering the Sim Dashboard app I soon needed a mount for my base. The original was a great starting point, but didn't support my phone. So I did what everyone does here. Remix the sh*t out of it. It is my own model, but it is…

DS2000 Telescope Mount (WIP)

Replacement for the DS2000 motor mount. This is a work in progress. My main PCB is dead, so I'm using an arduino which takes inputs from a thumbstick controller I made. It's not shown in this pic, but I recommend wrapping a thick elastic…

fs2026-rewinder-slip-disc-ver-2

Was having an issue with the little slot for the spring snapping when under load so I reinforced it a little.

Soporte Samsung Galaxy S20 y S20+

Soporte para Samsung Galaxy S20 y S20+ con funda incluida para pegar con cinta de doble cara o atornillar

Samsung Galaxy S20FE telefoon Houder / Phone Holder 11-11-2022 carkit met usb

If you found my things useful, you can buy me a cup of coffee: paypal.me/FirmaOnbenul Een Samsung S20FE telefoon houder t.b.v. de Brodit dashboard clipon --- A Samsung S20FE phone holder for the Brodit dash Het is door mij zelf ontworpen…

DEKO DKRS20Q2 Makita battery adapter

DEKO DKRS20Q2 sawzall BT20XL01 (Makita BL18x0B compatible) battery adapter Your printer must be calibrated. You will need support. This adapter is compatible with Makita batteries BL1850B, BL1840B, BL1830B and their analogues: DEKO…

Handy Halterung Mercedes W205/S205 C-Klasse

Drei-teiliger Druck mit Magnet-Einsätzen. Magnete wahlweise Ø6x4 und oder Ø10x3. Der Grundhalter passt für eine Mercedes C-Klasse und wird zwischen Display und Tacho geklemmt.

ZWQ S200s Viper Picatinny Adapter

Allows the mounting of picatinny accessories to the top slide of the ZWQ S200s Viper. Uses 4x M3 screws. You probably want some coarse thread countersunk ones for the longevity of the holes in the plastic slide, but I ended up using…

Apple watch band holder by as2008schl REMIXED

I took Apple watch band holder by as2008schl and merged all of the modular bits in to one 5 slotted holder meant to be mounted with double sided tape. The ones on the left are 42mm and the right are 38mm and both fit nicely. These were…

Meade Telescope DS2000 Worm gear and thubscrew

I picked up an old but mostly functional Meade DS-2102MAK telescope with Goto mount for my kid. The batteries had been left in it for years so I had to open up the mount in any way to clean it up and I discovered the worm gear on the base…

Antenna Recreation for Toyota IS200 IS300 Altezza Gita Sportcross

If you have found this model I guess like me you have broken your antenna while washing the car, moving a cover or just looking at it the wrong way. So I got replacement then modeled it the best I could to match to the original toyota…

S20 cover with Honeycomb design

When using the STL file with your slicer, in the ‘Print Setting/Horizontal shells’ tab, set the top and bottom layers to 0. You can also change the 'Infill/Fill pattern' to your choice (except Concentric that will not really protect your…

Phone holder for bunk bed (samsung galaxy S20 FE)

Phone holder for bunk bed (samsung galaxy S20 FE)

DJI Mavic Mini Samsung Galaxy S20+ Adapter

Dieser Adapter ist für das Samsung Glaxy S20+ in einer Silikonhülle geeignet Drucker: DeltiQ2plus TRILAB Düse: 0,4 mm Layerstärke: 0,2 mm Filament: smartmaterials3D YouTube Video: Making of

S20 FE 5G Case

Custome mobile phone case for S20 FE 5G. It is a minimalist type of case covering only necessary areas which will prevent it from breaking during a fall. Also, you will be able to feel the original body of the phone without compromising…

Mountainbike front light holder Sofirn HS20 / HS 20

You should print it with PETG, no supports needed. The clip needs some flexibile material otherwise it breaks. If the lamp should move while driving, you can add a rubber band and clip the lamp to avoid changing angle.

FS2026 spool adapter for Creality Plastic spools

Sized to fit Creality Plastic spools, including the undocumented cutout parameters to offset the recessed hole. Parameters of the OpenSCAD file: spoolHoleDiameter: 56.4 spoolWidth: 66.0 spoolCutoutDiameter: 60.0 spoolCutoutDepth: 2.0

W204/S204 Mercedes CDI220 Radiocover Tablet Holder

I was in the need of an Navigation device but couldn't mount it properly. So i've created this model to hold my 8" Tablet on the Radiocover of my Mercedes CDI220. Original Radiodisplay i need so that was the only opportunity. I've just…

WS2000 Rain Gauge Bird Spike Ring

Please post a pic if you make this! Note: I am working to create a thinner version of this. Needed bird spikes for the rain gauge on my Ambient Weather WS-2000 station however didn't purchase them. Built this ring that snaps into place.…

Battery adapter Womax S20V to INGCO tools P20s

The size of battery metal contacts is 15 x 13 mm , thickens 0.8 mm A dry wall metal supports are good alternative for metal sheet , for contacts. A wood screw betwine 20 - 30 mm depends on tool handle size on the other side , for securing…

Netgear GS208 wall mount

printed in 0,2mm PET with supports on.

Atomstack X20/A20/S20 Laser Seal

For Atomstack X20, A20, S20 Sealing the air-assist chamber good or bad idea? I was surprised by the amount of dirt (soot) I found in the chamber after a few cuts. The soot can land on the protective lens and cause distortion or more…

Meross MTS200 Adapter for 503 Electrical Box

Upgrade your smart home experience with our custom-designed adapter for the Meross MTS200, specifically engineered for 503 electrical boxes. This adapter provides a seamless solution for integrating your Meross devices into existing…

Sony HT- S20R Wall stand

Montaż do tylnych głośników HT-S20R od Sony. --------------------------------------------------------------- Mounting to the HT-S20R rear speakers from Sony.

Adafruit MacroPad RS2040 switch plate

Did you buy the MacroPad barebones, like I did, and realized that you had no plate to anchor the switches to? Yeah, that happened. So, OpenSCAD to the rescue. I found the dimensions of the plate on Adafruit's site and with some BOSL magic…

Sony Action Cam replacement tripod adapter - HDR-AS100V HDR-AS200V

Redesigned ¼" tripod/accessory adapter for Sony Action Cams. Designed for HDR-AS100, but may also fit HDR-AS200. This adapter replaces the terrible original adapter that only has a single mounting point at the front of the camera. I broke…

ZWQ Viper S200s Foam Dart Blaster Rear Ring Pull

This is a ring pull for the ZWQ Viper S200s that mounts to the top of the slide using four M3 bolts. There is a version for countersink bolts and normal cap head bolts. The ring pull sits low enough to not obscure the sights, but is still…

Main gear for dolphin S200 pool robot

Better with ABS

Samsung Galaxy S20 FE TPU Case

Samsung Galaxy S20 FE TPU Case

S20fe 2piece style case ( S20 fe )

Remember the s8 2piece style case? they dont make it anymore so i have to print one for my s20fe. Just need a bit of bluetac (the original s8 case have that sticky tape in it so…) You can print it from whatever abs pla…. slides on the…

Abyss2022 quadcopter frame - 3.5", 4.0", 4.5", 4.7" (DJI Spark) and 5"

3D printed, modular quadcopter frame. General notes Supported propellers: 3.5, 4.0, 4.5, 4.7 and 5 inch Motor mount pattern 12x12 for all except 4.7 inch (this one is dedicated to DJI Spark’s 3x11mm mount type) Supported camera mount…

Lexus IS200/300 floor mat hook

Lexus IS200/300 floor mat hook

MS2000 Light Marker Prop

Back with another pretty simple prop. Printing this should be very straightforward. Assembly is just as easy but depending on your printer you might want to scale down the lower part by just a percent or two. In my case it perfectly fit.…

Hotwheels Ford RS200 Team Transport Display Base

Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 Custom display base are also available from $5! Contact me to discuss what you want! If you…

Samsung Galaxy S20 Ultra - mock-up

This mock-up is based on the size of my Galaxy S20 Ultra phone with a thicker Otterbox case. I made it because I had a pocket on a new pair of jeans that normally fits my phone just fine, but must have been sewn incorrectly and was…

Radiation shield for DS18S20/DS18B20

PETG, 2x Screw M3

Phone Holder with Wireless Charger Pad for Mercedes C-class (W206, S206) Cup Holder, parametric, incl. Fusion 360 project files

This design features a phone holder that can be placed in the cup and accessory compartment of the center console in Mercedes cars, replacing a cup. It is designed specifically for the W206/S206 models of the C-Class but should be…

Samsung Jet 75 battery holder (VS20T7536T5)

When I bought my Samsung Jet 75 I got an extra battery pack with it. I create this holder so you can hang it on the wall and store the battery there. I printed it with 30% infill and I used the Prusa color change option for the orange…

Samsung s20 Case With Shock Absorbing Corners

PETG is best, for flexibility in the bumpers, PLA works too but wont be as protective/durable Use supports There is a model without bumpers, s20case no bumpers s20case is the standard model for the bumper case s20case ace has an ace…

FS2026: Bi-directional Eco Remix with Original Lid

Premise The idea behind this whole endeavor was to use the new FS2026 system without having to waste filament on printing an entirely new lid or having to drill a hole into the box, and consequently being able to use the box in its…

Pool Phone Holder for S20 / S25 Ultra with case

Handyhalter für Samsung S20 (/S25U) mit Schutzhülle. Max Größe 16 dick x 79 breit (16 x 85) Passt auf 50mm Rohr

S.E.A. Equalizer slider knob for JVC jr-s201, 301, 401, 501 model receivers.

Tested on jvc jr-s401. Should work on all other models that use the same knobs. I printed without support with the round flat faced “front” of the knob facing down, like in the set of 5 model. Printed on creality cr-6se. Model is in mm.