Counting matching models…
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
P90 and FS2000 parts Printing: All parts should be printed solid. PLA will not work for anything other than the selector switch. Nylon is the recommended material. You need to use a strong impact resistant material. Stay away from carbon…
Printed in ABS+ small amount of tree supports needed 51mm Diameter end with anti slip ring. Donate now and make a difference in someone’s life!
Case to keep the PTS200 USB-C soldering iron and a few of the most important accessories in a neat tiny package.
The original viewfinder has the same clamping mechanism. I added a bevel on both sides to make it fit because the width of the viewfinder is a little sunken into the body. Printed with layer height of 0.15 (first layer 0.2) using tree…
1:28 Honda s2000; Mini-Z compatible I have remixed and put together this rc kit for the Honda s2000, along with an assembly video. Hopefully this will translate to an enjoyable print and assembly experience. Hardware Recommendations The…
M2000 Marker from escape from tarkov
Replica of the elusive OEM side skirt mounts. Based on some old forum posts and some trial and error. I recommend printing them in Nylon, you might get away with using PETG but wouldn't recommend ABS/ASA due to their brittleness. PLA is…
Printed in ABS / ASA without support.
REV 01: Original model. REV 02: Filter fit improved, deeper socket.
Honda S2000, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for better…
Lexus IS200 IS300 Cupholder. Fits in the original glove compartment, no gluing required
Got tired of having coins and everything fall into where the already bad cupholder is in my S2000 so made this little organizer.
This is a mount that attaches to the Modifry S2000 mount Features - Slim mount, only 8mm thick - Easier line of sight by raising iPhone up 2.5 inches from center of mount - Phone can oriented in portrait or landscape - Fits MagSafe…
V2. Printed and test fit and working well.
This is a bracket to hold your CTEK or NOCO branded quick connector. This bracket makes it easy and convenient to connect and disconnect your battery tender. I also print these from my Etsy store and also have some S2000 specific brackets…
To retrofit my old light installation i wanted to use the Tapo smart button as a light switch replacement, but i didn't want to remove the original light switches. So i made this light switch cover/base plate which will hold the button…
Replacement for the DS2000 motor mount. This is a work in progress. My main PCB is dead, so I'm using an arduino which takes inputs from a thumbstick controller I made. It's not shown in this pic, but I recommend wrapping a thick elastic…
Allows the mounting of picatinny accessories to the top slide of the ZWQ S200s Viper. Uses 4x M3 screws. You probably want some coarse thread countersunk ones for the longevity of the holes in the plastic slide, but I ended up using…
I took Apple watch band holder by as2008schl and merged all of the modular bits in to one 5 slotted holder meant to be mounted with double sided tape. The ones on the left are 42mm and the right are 38mm and both fit nicely. These were…
I picked up an old but mostly functional Meade DS-2102MAK telescope with Goto mount for my kid. The batteries had been left in it for years so I had to open up the mount in any way to clean it up and I discovered the worm gear on the base…
If you have found this model I guess like me you have broken your antenna while washing the car, moving a cover or just looking at it the wrong way. So I got replacement then modeled it the best I could to match to the original toyota…
Please post a pic if you make this! Note: I am working to create a thinner version of this. Needed bird spikes for the rain gauge on my Ambient Weather WS-2000 station however didn't purchase them. Built this ring that snaps into place.…
Upgrade your smart home experience with our custom-designed adapter for the Meross MTS200, specifically engineered for 503 electrical boxes. This adapter provides a seamless solution for integrating your Meross devices into existing…
Redesigned ¼" tripod/accessory adapter for Sony Action Cams. Designed for HDR-AS100, but may also fit HDR-AS200. This adapter replaces the terrible original adapter that only has a single mounting point at the front of the camera. I broke…
This is a ring pull for the ZWQ Viper S200s that mounts to the top of the slide using four M3 bolts. There is a version for countersink bolts and normal cap head bolts. The ring pull sits low enough to not obscure the sights, but is still…
Lexus IS200/300 floor mat hook
Back with another pretty simple prop. Printing this should be very straightforward. Assembly is just as easy but depending on your printer you might want to scale down the lower part by just a percent or two. In my case it perfectly fit.…
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 Custom display base are also available from $5! Contact me to discuss what you want! If you…
Box for holding 3 Air Arms S200/CZ 200 Magazines. Assembly: Put the lid on the box, and slide the pin in from the left side. I recommend you add a dab of glue to either side of the pin afterwards to keep it there. Use supports for…
54107-S2A-003 SUPPORT B, SOUFFLET CHANGEMENT DE VITESSE Pour honda s2000, crée à partir du modèle original idéal en ABS
Replacement stock style Parking Brake Release for Honda S2000. (E-Brake Button) May fit other hondas. Recommend tapping with M5x.8 Print Settings Printer Brand: LulzBot Printer: Mini Rafts: No Supports: No Resolution: .2 Infill: 12%…
utilizing the Renault Scenic 25mm ARB and the Bush, you can upgrade from 21mm solid ARB to a hollow 25mm. recommend upgraded drop links. Future Plans to add 21, 22 and 23 ARB Bush. this is a substitute for a poly bush. Printed in Bambu…
This is a rugged case for the PTS200 soldering iron. It is designed so it fits a build plate that has at least 210mm in one direction (e.g. Ender 3 and their variants) no resizing is necessary. Also it provides inserts that can include…
This is a 3D-printable tool to loosen and tighten the OEM oil cap on a Honda S2000. The part number this works with is 15610-PCX-A01. It's easy to overtighten the oil cap and crack it in the valve cover. Do not crank on it with this tool!…
Toyota Altezza RS200 as a 3D Model. This design can be scaled to any size in your slicer. Print flat with ~5% infill to save material. Perfect as decoration. Category: Signs & Logos
An outline of the iconic XE10 series (Toyota Altezza AS200-AS300, Lexus IS200-IS300).
This is a wall holder for the Tapo S200B wall switch. It mounts with 2-4 screws into the wall, and the pluggs are used to cover up the screws after mounting. The Tapo switch is mounted to the holder with the supplied adhesive patch and…
A blank switch for a Lexus is200 with holes to fit a toggle-switch. Probablky fits other toyota and lexus models too. Reverse engineered ibraud's model and tweaked it for a better fit, added hole for button.
Needed a Pylontech US2000 holder to....hold...my Pylontech Battery
https://www.buymeacoffee.com/jhc89 Printed button side up with snug supports touching build plate only and carefully removed with flush cutters and fine scissors. I started by copying the dimensions from my old and tattered factory rubber…
If you have a ZWQ s200s viper blaster that you have upgraded, chances are, it is difficult to adequately grip the smooth slide. In my particular blaster, I have installed a K25 spring, which makes it difficult to prime with its current…
Case made with PLA, and the compartment mesh with TPU, all 0.20mm. Only use support on Lid for the recessed logo lettering To print the TPU mesh, choose an infill pattern (honeycomb 20%), 10 wall loops and set top and bottom shell layers…
Support de batterie d'origine pour Honda s2000. Crée à partir du modèle d'origine Idéal en ABS ref 31521-SR3-0000
USE AT OWN RISK!!!! Blade protector for parkside sliding miter saw. May also fit other cheap brand 210 mm saws. Let me know how it works out for you. The stl model is modified a bit from the one depicted in the photos. I disclaim any…
UPDATE COMIGN SOON!!!!! FOR TONES AND ROTATOR BE AWARE This is my 3D‑printable version of the Whelen WS‑2000R , built to rotate and sound as close to the real thing as you can get with hobby‑grade parts. I modeled the housing, rotator,…
1x2 Gridfinity box designed to hold a Kingston XS2000+its original TPU case, should also be compatible with the XS1000
If you found my things useful, you can buy me a cup of coffee: paypal.me/FirmaOnbenul Houder om het Klik Aan Klik Uit ICS2000 Basis-station aan de voedingsadapter op te hangen Holder for hanging the Click On Click Off ICS2000 Base station…
The Meross MRS200 is a Wifi (Thread) motorized winder for belted roller shutters. Very nice device but quite bulky. In my case I had no way to install it in place of the original winder in the window frame, so I designed this box which…
Supports for Meade telescope tripod DS2000 and other models. The OEM part had flimsy holes where it mounts to the legs with rivets. I made this more sturdy so it wont break. Take out original rivets with drill or pliers and replace with…
Orange Pi 3 LTS case with SSD Kingston XS2000
Ford RS200 as a 3D Model. This design can be scaled to any size in your slicer. Print flat with ~5% infill to save material. Perfect as decoration. Category: Signs & Logos
This is a Adapter to mount an Sony Action Cam to a GoPro "3 Finger" mount. You need a M6 Screw to attach the Camera to the Adapter. 2025-03-19: I added a shorter Version where you can open the MicroUSB Port to charge the Camera while…
If you find my designs useful, please consider sending a tip . Update Nov 2025: Added a 2nd version which has recesses for adding an o-ring - Images online seem to show early versions of the mount used an o-ring, later ones like mine…
I bought this PTS200 soldering iron from aliexpress which supports TS100-styled bits and T12 bits via different sleeves. The threaded connector (shared between both TS and T12 configurations), is left-threaded on the sided that fits onto…
Fill the two holes in the front bumper with these easy to print models. I've printed them in PETG with my ELEGOO N3Pro
Replacement pin for Lexus IS200/IS300 Fuel filler cap Category: Other
Update: V2 has lower schoulder with a larger base to fix a problem with the friction of the part. Prefer to print it in PETG or ABS. Attach the chain guard to the chainring with 5 M4 bolts if your chainring is not threaded. In the other…
Plate Adapter 503 Electrical Box for Thermostat Meross MTS200
This will provide mounting for the Helix speakers to the underseat subwoofer enclosures. The wide and narrow hole for the wires can be modified to accomodate your cabling. Since my OEM Hi-Fi (676) subwoofers were not screwed in but glued,…
An enclosure for a thin AU/NZ light switch to hold a Tapo S200B button I did not want people turning off the light from the hard wired wall switch, so here is a holder with the tapo button to cover it up
To hold the thermometer within the homemade 3D print filament case.
Ein Schutzrahmen gegen Schmutz und Späne und gegen verstellen des Maschinenzeigers. Als schutzscheibe habe ich ein 1,5mm Plexiglas genommen und den gesamten Rahmen mit Spiegelklebeband angeklebt.
You need to clear the shaft hole, there variation in the size for exactly the same bogey model so take the time to check the size of your bogey shaft first
Unloading tool for S200/CZ 200/Altaros SA Assassin magazines. While it's unlikely you will ever have to try it, but when you have to do it, it is annoying and time consuming to extract pellets individually from a tiny magazine, and most…
A wall mounted display for the LEGO Speed Champions 2 Fast 2 Furious Honda S2000. There is a “FULL MODEL” that should be printed at a .2mm layer height. See screen shots for which layers to change colors at. Also supplied is each color…
Wanted an oil pressure guage for the car
My Kingroon S200 arrived with a warped bed - the center was a low spot, by about a full 1 mm. To solve this, I planned to shim the center. However, this printer has very little space between the Y carriage and the heated bed (literally…
Bonsenkitchen VS2000 Vacuum Sealer came with a cardboard spacer to store the sealer safe. I create a replacement for that cardboard piece.
USE SUPPORTS WHEN PRINTING!!! what is included one array with 3 horns how to assemble if you want more than one array, print some more until you're content. use superglue and glue the flat part on the back to any surface. you can use a…
Halo MA40 assault rifle body kit for the F2000 and FS2000 airsoft AEGs. Parts: Flash Hider (Pt1, Pt2), Hand Rest (A, B), Top Rail (6 different segments, numbered in order). Hardware: M3 screws to lock the parts down / pin them to the…
Einschlagdorn für den Varioseitigen KW Dichtring am New People S 200i. Passt höchstwahrscheinlich auch für 150/125. Passt genau auf die KW, wodurch verkippen verhindert wird. min. 6 shells min. 8 top/bottomlayer min. 50infill Meiner ist…
The Pangea Audio DS200 speaker stands are hollow, and they will be greatly improved by filling them with dry play sand. The problem is both sides of the pillars have plates welded on them, giving only a tiny hole to pour sand through.…
Rubber Cap for Viessmann Heating Vitodens200 Exhaust Tube
Hi, I designed a custom bracket to hold the Continental flexfuel ethanol sensor I added to my '02 RHD HONDA S2000 AP1 . No additional hardware needed. The bracket mounts on the side of the flywheel case (junction of engine and gearbox),…
Created the single shot tray for my S200 mk1, one of my first designs for 3d design and print. It’s been in use on my air rifle ever since. Works very well.
I made this for my ice-drift car. It basically says “move” in Norwegian. I've added the project file so you can change the text to whatever you want. Prints in two parts that interlock with pins. Add a pause at layer height 38 if you want…
DS200-125 Zigbee Door sensor mount
wheel should slide emplace and doors are held together be pins
Desktop stand for the Inrico S200 network radio device. Category: Hobby
Halo MA5C assault rifle body kit for the F2000 and FS2000 airsoft AEGs. Parts: Grip, Muzzle (14mm CCW thread), Top Rail 01-08 (numbered front to back - these are the parts that go on the rail). Hardware: M3 screws to lock the parts down /…
HDD tray for Aerocool DS200 case, just a quick model of the existing hdd tray adapted to be used with screws. A very specific design but hopefully someone can make use of it. I use software which uses z as height there for alter print…
Replaces the original spacer for a ca go FS bike. Requires a M6x25 and M6 washer for mounting. The inner hole is a bit tight. But helps installation, because the spacer holds on the screw.
Print 1x central part and 4x legs on their side. In the event that the stand feels too loose, try reprinting the central piece at 95% scale in the X and Y directions.
I made this for my PDU to hold the power supply and CD reader/CD's and board. This is what I used in this: Power supply Meanwell RD-50A (5VDC/12VDC)…
EN A small ring that provides a better grip on the rotary knob, which is too smooth Allows you to turn it with just one finger (like the knob on the MK3). No glue required—it snaps on and off as needed 3 Fichiers : .STEP, .stl, .3mf Voilà…
Print Orientation upside down. No Supports needed.
The train illustrated in the image is an example of a vehicle of this model. S=1/150train
Anker solix s2000 is the best possible UPS to use so figured id mount it on my desk have another one mounted under my server rack
Update: V2 has lower schoulder with a larger base to fix a problem with the friction of the part. Prefer to print it in PETG or ABS. Attach the chain guard to the chainring with 5 M4 bolts if your chainring is not threaded. In the other…
UPDATE COMIGN SOON!!!!! FOR TONES AND ROTATOR BE AWARE This is my 3D‑printable version of the Whelen WS‑2000R , built to rotate and sound as close to the real thing as you can get with hobby‑grade parts. I modeled the housing, rotator,…
An enclosure for a Tapo S200B to use it as a doorbell. Should give some degree of protection against the elements and hide the button to help prevent theft. Base uses a reverse thread, there are two versions: one with holes to allow use…
Use this as your license plate at shows or car meets. CNC it, or print it with PLA/PETG/ABS filament and wrap it for some color. Check out some of my other S000 products at my Etsy store .
This is a Uniden SDS200 Base Scanner Stand.. I printed mine in PETG 0.2mm layer, 3 walls, 15% infill.
This is a pocket to replace the factory single DIN radio and should work on all model years (tested on a 2007). There's two versions, long and short but both will work with the factory radio brackets to mount. Try to use a M5 screw that's…
This is a Gridfinity holder (2x5x6U) for a PTS200 soldering iron, with up to two extra tips (TS100/TS101) and the M2-M8 heat insert tops (One hole is slightly bigger for the M8 top). Soldering Iron:…
