Counting matching models…
The latest installment of my transfer adapter. This adapter fits Ken's dressing bottles and many others. In order to print with a flat lip seat I designed in a custom support. You can delete it in the silcer if you want. I print in PLA or…
On my Salad Fork 1.1 build, I chose to use: AntHead tool head Rapido 2 (High Flow hotend) Cartographer v4 probe Needed Hardware: z_carriage_rear_carto: 4x M2x4 SHCS The salad fork manual calls for M2x6 screws which are too long with my…
This is a specific implementation of the FT EMS (Electronic Mounting System) designed specifically for the Salad Fork 180 frame. The Salad Fork is a fantastic sub-200mm Voron-based printer, but managing electronics in the base can get…
Salad Fork or StealthFork Auxiliary Fan (12032) Needs some voron heat inserts (4),2 m3x10, 4 M3x8 bolts and will need supports. i used LDO slip in nuts for the 1515. Still needs a little work but works fine as is.
INTRODUCTION Due to popular demand, we have designed an EMS frame for the Salad Fork with inverted electronics . Given the printer’s moving-bed design, an inverted electronics layout makes far more sense, allowing users to access their…
On my Salad Fork 1.1 build, I chose to use: AntHead tool head Rapido 2 (High Flow hotend) Cartographer v4 probe Needed Hardware: z_carriage_rear_carto: 4x M2x4 SHCS The salad fork manual calls for M2x6 screws which are too long with my…
Saladin - Ṣalāḥ ad-Dīn Yūsuf ibn Ayyūb — Buste 🇫🇷 Description Ce buste représente Ṣalāḥ ad-Dīn Yūsuf ibn Ayyūb, plus connu en Occident sous le nom de Saladin, dans une interprétation sculpturale fidèle inspirée de l’iconographie la plus…
Hi everyone! 👋 My girlfriend recently asked if I could 3D print her a salad spinner. After searching around online, I found very few ready-made options that actually made sense for home printing. Most existing models either use massive…
Ich habe in meinem Auto einen universal Adapter, den wollte ich umfunktionieren zu einer Magsafe Halterung. Die Halterung geht nicht sauber rein, hält aber trotzdem bombenfest. Fühlt euch frei, sie noch anzupassen. Gebraucht werden: 1 *…
Tube support made for transforming salad sauce tube (sodebo like) into bud vase. Ideal for plant water propagation. 🌱 Model created with OpenScad No printing support needed
This is a specific implementation of the FT EMS (Electronic Mounting System) designed specifically for the Salad Fork 180 frame. The Salad Fork is a fantastic sub-200mm Voron-based printer, but managing electronics in the base can get…
New version: Salad Survivor v02 The most common sizes I've encountered were a bit smaller than 8 cm and 6 cm , cubed. The upper 2 cm of the soily squares are mostly free of roots. It is also important to keep the most outer leaves from…
The most common sizes I've encountered were a bit smaller than 8 cm and 6 cm , cubed. The upper 2 cm of the soily squares are mostly free of roots. It is also important to keep the most outer leaves from any pressure of the container to…
I have a salad spinner from Sur La Table that broke. Taking it apart shows this drive component that relies on a pretty small plastic piece to spin the whole basket. It snapped (of course) so I modeled a replacement. Not pretty, but…
Show your love for the iconic Tupperware Salad Bowl with this adorable keychain! This meticulously designed, miniature replica captures all the details of the beloved container. Perfect for Tupperware enthusiasts, collectors, or anyone…
This Nozzle Brush and Bucket were inspired by Dr. Mursey's version, but since there were no CAD files or anything I created everything from scratch, but took some measurements from his version. Notable differences are that it's 3mm…
During my Salad Fork v1.1 build, I realized that the feet shipped with the kit were WAY too big, intended for full-size Voron machines, not the 3D Printers for Ants size feet. To avoid pausing the build longer than necessary, I whipped…
Remixed from @CaptainC to fit Migros / Rotho salad spinner: https://www.migros.ch/en/product/708161100000 https://ch.rotho.com/en/products/salatschleuder-4-5-l-fresh It's my first try with Blender, so please excuse some imprecisions or…
Display frame + holder for the front skirt of Salad Fork v1.1 for the BTT PiT FT43 V2.0 display Replaces the Display_Skirt_x1.stl from the original. The Front_skirt_right and Front_skirt_right from the original can be used as-is, so this…
We have an old Moulinex salad spinner from the 1980 (or something like that). The internal arm used to move the salad shaker was partially broken. As I found nothing on the web, I decided to create a new one using the broken one as a…
EN 30% to 300% 'scalable' basket Can be used as a pocket divider, fruit basket... 6 models available in .stl and .3mf. Above 150%, use .3mf. No support for this model 2 perimeters and 3 layers top and bottom with a 10% fill in 3D…
Figure size: 30,95 x 29,20 x 40 mm Use your own stand or a pre-made stand in .stl Supports are necessary Illustrative pictures & gifs Possible re-make for your own, non-commercial purposes My private AI model without textures is available…
Modified Micron's DIN rails mount into 6, 7 and 8mm variants. Helps accommodate rails that has been cut a bit shorter than desired, especially for those that cut them with hand saw. Meant for Micron, might work for Salad Fork and other…
Made this fruit bowl out of some underlayment with a CNC router at work. It's not exactly a 3d print but I'll upload the STL and STP anyway for you to do with it whatever you want.
This little cog from the Emsa Basic Salad Spinner seems to brake quite easily: … so I made this replacement part. Works well again, don't know yet how durable it will be… Printed in PETG, supports are needed like shown in the 3mf file.…
salad spinner handle Moulinex. On the original axis PETG, PLA possible
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Creality Black Transmission Distance: 1 PLA Sunlu Red Transmission Distance: 5.7 PLA Sunlu Orange Transmission Distance: 6.4 PLA Creality…
A travel-sized box for the Point Salad board game. The original game box is 3x the size it needs to be and made of cardboard - this plastic box is just large enough for the cards and much sturdier for packing. You will need to print 1 box…
For the Moulinex salad spinner Type 313.0.00 Works perfectly once you use a bit of force to push the knob in. I've included the fusion 360 design if you want to modify it. Pour un essoreuse Moulinex Type 313.0.00 Fonctionne parfaitement…
If you find any of my designs helpful, please send me a tip, or a donation on any of the donation apps: @MATTxMERCY. Kind words are also appreciated. One of the internal teeth for mine broke off, making it to where it would not stay…
I took a bunch of different parts and inspiration from other creations. I liked Noob's teeth and the cat ears but wanted a lower bltouch mount and thought the salad fork logo looks a bit like a flame point on a cat. Then I had not great…
In some shops (e.g. Lidl), one can often only find salads with their roots. While it is the best way to keep fresh salad by letting it grow near the kitchen window, one now needs a planter pot and a planter bottom. And planter pots are…
A miniature sculpture of the "Salad Guy" from Divinity Original Sin 2. Made for miniature wargaming tabletop games. --- This model is based off of its appearance in Divinity Original Sin 2's Concept ART : Fits on 25mm wargaming base. I…
Target has a "candy salad" bowl that comes with a little wrapped candy topper, but I decided that-in the spirit of Easter candy and our love for Peeps-to modify it to be a Peep.
Salad Fork or StealthFork Auxiliary Fan (12032) Needs some voron heat inserts (4),2 m3x10, 4 M3x8 bolts and will need supports. i used LDO slip in nuts for the 1515. Still needs a little work but works fine as is.
INTRODUCTION Due to popular demand, we have designed an EMS frame for the Salad Fork with inverted electronics . Given the printer’s moving-bed design, an inverted electronics layout makes far more sense, allowing users to access their…
Saladin - Ṣalāḥ ad-Dīn Yūsuf ibn Ayyūb — Buste 🇫🇷 Description Ce buste représente Ṣalāḥ ad-Dīn Yūsuf ibn Ayyūb, plus connu en Occident sous le nom de Saladin, dans une interprétation sculpturale fidèle inspirée de l’iconographie la plus…
Hi everyone! 👋 My girlfriend recently asked if I could 3D print her a salad spinner. After searching around online, I found very few ready-made options that actually made sense for home printing. Most existing models either use massive…
Ich habe in meinem Auto einen universal Adapter, den wollte ich umfunktionieren zu einer Magsafe Halterung. Die Halterung geht nicht sauber rein, hält aber trotzdem bombenfest. Fühlt euch frei, sie noch anzupassen. Gebraucht werden: 1 *…
Tube support made for transforming salad sauce tube (sodebo like) into bud vase. Ideal for plant water propagation. 🌱 Model created with OpenScad No printing support needed
New version: Salad Survivor v02 The most common sizes I've encountered were a bit smaller than 8 cm and 6 cm , cubed. The upper 2 cm of the soily squares are mostly free of roots. It is also important to keep the most outer leaves from…
The most common sizes I've encountered were a bit smaller than 8 cm and 6 cm , cubed. The upper 2 cm of the soily squares are mostly free of roots. It is also important to keep the most outer leaves from any pressure of the container to…
I have a salad spinner from Sur La Table that broke. Taking it apart shows this drive component that relies on a pretty small plastic piece to spin the whole basket. It snapped (of course) so I modeled a replacement. Not pretty, but…
Eine Salatschleuder stand schon lange auf der Liste der Dinge, die man eigentlich mal kaufen sollte. Bisher waren mir die verfügbaren Modelle allerdings entweder zu klein oder zu teuer. Also habe ich mich hingesetzt und selbst eine…
After installing my cartographer on my Salad Fork 180 I noticed the probe would hit the top of the rear leadscrew. Being that I didn't want to cause damage I figured I needed about 4mm of clearance. Now, I could limit it in software, but…
As a request from one of my buddies, he needed a 'Salad Bar' sign for his cat grass garden in his home. So this is the end result! There is not just the sign that can easily be printed in any set of colors you desire, but also two…
The knob on our salad spinner broke off a while back and we needed a new one. The first version was much smaller, but it fit. When I went to find a picture of the original product online, I saw that the knob was larger than the one I'd…
Hier ein Drehknopf, für eine defekte Salatschleuder. For my broken salad spinner I made this turning knob.
This is designed to cut two salad fork and spoon pairs from one board. You run the tool path once, then flip it over and run again. This can be carved on a small CNC like the Inventables Carvey. Category: Household
Our salad was not working properly: the bottom part that latches on to the strainer and spins it was constantly disconnecting from the cover while being spun. It seems the latching mechanics has weared out. This pin simply helps that…
These handles are to fit any tool or utensil as long as the tang is sort of close to the size of the hole. If you have something quite off and want me to edit the size of the hole, just comment and I'll get that done. For best results,…
Réfaction du couvercle rotatif de l'essoreuse MOULINEX 313.0.00 ( 313000 ) Re-design of the top of Moulinex salad spinner MOULINEX 313.0.00 ( 313000 ) Print Settings Printer Brand: DAGOMA Printer: Disco Ultimate Rafts: Yes Supports: Yes…
Remix/mod of the Salad Fork electronics bay fan blank model (from their repo) for use as covers for the fans. Basically, it is the fan blank insert cut down, pegs added, and M3 screw holes added. The pegs provide 4mm of depth for the…
A cover for the magnetic media basket mod available for the Honeybadger / Fabreeko Salad Fork kit, prevents the media from being blown into the chamber when the two 5015 fans are running at max speed. Imagine my surprise when my Nevermore…
Modified to fit the Salad Fork with the thicker panels. (Fabreeko Honey Badger Salad Fork kit) 100mm Mount with M3x16 Screw Mirror in slicer if you want to put of other side of printer. For all other items use the original for 100mm…
Strictly speaking this small insert is not intended for drying lettuce but for drying home-grown sprouts. It turns a Genius Nicer Twist chopper into a sprouts spinner. Printed with TPU.
Just a simple cutout in the rear skirt to allow a microfit panel plug. I've added a 4 pin and 2 pin version but have only printed and confirmed the 4 pin to fit. With the Fabreeko carbon filter you need to get fan wires under the deck…
Bragg ACV Glass Bottle Cap with Holes + Cover to cap holes. Also fits Isopropyl Alcohol bottles. I generally add sardines with olive oil and lemon to my salads then just use this cap to dash the acv directly onto my salads and forgo the…
Under gantry mount for either a disco stick or daylight stick. This will add stage style lighting to the Salad Fork printer. You will need to mirror the parts for the other side in your slicer. I currently have boop installed which places…
TinyMtn Free Pack 10 - Andes This is a package with sets of 3D model files for four notable mountains in the Andes. Aconcagua, 6962 m / 22,841 ft Volcán Chimborazo, 6267 m / 20,561 ft Nevado Huascarán, 6768 m / 22,205 ft Ojos del Salado,…
I have an old OXO Salad Spinner, but sometime over the years I lost the base that keeps the salad spinner stable as you use it. I could just replace the whole thing, but repairing it is so much more efficient. I know that OXO has released…
This is the spring switch for a Presto SaladShooter! The original (white plastic) finally failed. So with the help of a caliper and fusion 360, I resurrected the deceased, automatic cheese grater! Print Settings Printer Brand: Prusa…
The chrome-plated plastic handle on our Saladmaster became brittle and cracked in half, so I designed a replacement part. Ours is the “V” model and fits these specs: Bolt Length: 46.15mm Bolt Shaft Diameter < 7mm Bolt Head Diameter <…
There are two sizes—280mm and 245mm. The short one fits on smaller print beds. To complete assembly you will need ~70mm length of filament and two metal washers ~7mm in diameter. Assembly: Flatten one end of the length of filament by…
Redesigned the fan guard for the Salad Fork (originally from Tiny-T).
Remix of the @3DPMAMSIH Mini Stealthburner Hex with the Salad Fork logo.
Replacement handle for salad spinner with hole diameter 10mm inside / 14mm outside.
This is a mix of the Salad Fork's standard right rear skirt and a generic keystone slot. Use it to add an Ethernet jack, etc. to the back of the printer. Print with the flat/backside down.
New SF skirts with a v0.2 look. Feet now screw directly into the bottom of the extrusions.
The handle of our Moulinex salad spinner bowl was broken for years. So I created a replacement part. It works now for at least 5 years perfectly. Now I want to share it. It snaps in place with a little force. You cant remove it afterwards…
Replacement for the standard IKEA UPPFYLLD Salad spinner knob. Tried to design it as close a possible to the original. Printed with 100% in PLA and works great. However, would recommend to print it in PETG.
This was made to accomodate a Frame thermistor or running other cables through the skirt and along the Z extrusion for maybe a Chamber Thermistor or whatever else you want to route there. As you can see from the pictures, I used it to…
Ok gather around children because this print has a story. It was last week, and I got my hands on an Italian salad dressing thinggy right, and because the hole is too big, I ended up drenching my poor salad in an unhealthy amount of…
Simple gardener's label for beetroot, courgette, spring onion and salad leaf seedlings. Should print flat on the print bed.
This is to go with the side mount spool holder for the Salad Fork, spacing is designed the same as the model below and is designed for use with the Fabreeko Salad Fork kit. https://www.printables.com/model/362442-remix-for-the-salad-fork
The Forks for Your salad. Print instructions Material :PLA Resolution: 0,1 Infill: 10-15% No Support
Modification to the Salad Fork Magnetic Filter housing to add a wire chase and a Wire Channel to mount on back panel to hide all the fan wiring down to the electronics. This filter housing is intended for use with the magnetic filter mod…
Wire guide/hide to go on top of the Salad Fork A/B motor mounts. For more information about the Salad Fork printer, please visit the official repo at https://github.com/PrintersForAnts/Salad_Fork
Salad Fork mount and display cover for 3.5" HDMI screen. For use with the standard skirts. Screen and connectors used are linked below. Used the A2 and D2 connectors. Display cover simply snaps onto the display. Screen: Raspberry Pi 4B…
Salad Fork Top Hat. Modified 2020 tophat to fit the 1515 extrusions of the Salad Fork. Adds 35MM of space. Assembly information can be found here: Jakub3DPrinterMods/Tophat/ASSEMBLY.md at main · jakub874/Jakub3DPrinterMods (github.com)…
Z Drive motor covers for the Salad Fork For more information about the Salad Fork printer, please visit the official repo at https://github.com/PrintersForAnts/Salad_Fork
The tolerances are very tight. You may need to file out the inner circle of the mount for the antenna to fit in, and it will need more than hand force to pop it into the skirts. I recommend pliers. I designed this around the Salad Fork…
Replacement for a salad spinner bowl clip that holds it together. May not fit your model. I've given the original print already away since this was a project for my brothers salad spinner. Works perfect with a satisfying click. No…
The replacement knob for the salad spinner from GIES is more robustly designed and has been holding up well for over 5 years of frequent use. Installation is easy since you only need to snap it in place. It fits e.g. this model:…
Voron 1515 Extrusion Serial Plate Generator Preconfigured for Voron V0, Micron and Salad Fork. Clips right into your 1515 extrusion. Parametric in OpenSCAD Clip modified from https://www.printables.com/model/130955-clip-for-1515-extrusion…
After using the salad spinner for a couple of months, the rotation knob was breaking: the snap-in mechanism broke off. This design is more robust (and printable in contrast to the original) on one side but should also be printed with a…
This salad bowl can contain a standard 1kg filament spool perfectly. I just needed a fitting base, because the bottom is not flat. The other parts from amoose136 (center piece, top part) fit to the base. However, I've made the top piece a…
A small holder to keep tiny little tupperware salad-dressing containers from going all over my cabinets.
Tested on Prusa Mini using 5% infill 0.15 Layer Height 0.2 First Layer Height Print all parts separately and glue the letters in the spaces.
Wire covers for the back corners of the SaladFork build
Designed for tongs that are approximately 220mm long and have arms that are 16mm wide. Belt is retained when arms are open. Printed with flex filament.
Knopf zum schleudern der Salatschleuder Button for spinning the salad spinner
The enclosure panels for the Salad Fork need some fillers if the carbon system isn't used and a guide for the Filament. These will fill the round and square opening. You'll need super glue for the round fillers and (2) M3 heat inserts…
