P
PrintablesRaspberry Pi
Weather satellite receiving station antenna
Full tutorial to be found on the RAspberry Pi website .
- Downloads
- 1,202
- Likes
- 93
- Rating
- 0
Search results: satellit
Counting matching models…
P
Printablesschluppy
Starlink Kederleisten Adapter LMC & Dethleffs & Weinsberg + Satellitenhalterung 35 mm
Die Anregung für den Starlink Kederleisten Adapter kam durch Gogo 4 Camper. In seinem Video hat er einen Starlink Adapter für seinen Wohnwagen vorgestellt. Dieser passte auf unseren Wohnwagen gar nicht. Von seinem Adapter ist nur noch die…
- Downloads
- 863
- Likes
- 52
- Rating
- 5
P
Printablesbsfiosco
UAD-2 Satellite 1U Rack Mount
I designed this rack mount bracket so that I could install my two UAD-2 Satellite Thunderbolt units in my studio's rack mount cabinet. While Universal Audio does not make a rack mount bracket for these units there are unused screws on…
- Downloads
- 649
- Likes
- 15
- Rating
- 5
P
Printablesfreedom2000
ISS and LEO satellites tracker
Let's start by two video of a real ISS tracking in my home :) One at 16x speed and one much longer but with explainations ! https://youtu.be/MYff\_J85vZo https://youtu.be/\_7pX7NHbo6A So here is a mockup of a ground station antenna, able…
- Downloads
- 607
- Likes
- 125
- Rating
- 5
P
PrintablesD3D
Satellite Toy
Originally designed for the 2022 LM Show Christmas Community Print Drive! SPACE is our theme this year! Print and help us ship 3D printed toys to children and families in-need, all over the world!…
- Downloads
- 492
- Likes
- 69
- Rating
- 5
P
Printablesok1cdj
Dual Band Satellite YAGI Antenna
Original design by by LY3LP, recalculated by George M1GEO Dimensions and design: https://www.george-smart.co.uk/antennas/dual_band_satellite_yagi/ How to print: Element holders - 4 perimeters 20% infill no support - 6 Pcs Radiator holder…
- Downloads
- 484
- Likes
- 73
- Rating
- 0
P
PrintablesRavi
Orbi Mount for RBR850 router and satellite
This is a wall mount for Orbi RBR850 router and RBS850 satellite. The router can also be secured on the mount with two M4x10mm screws. Print instructions Category: Organization Summary This is a wall mount for Orbi RBR850 router and…
- Downloads
- 479
- Likes
- 20
- Rating
- 5
P
PrintablesazDave
QFH Antenna for Ham Radio Satellites
A QFH antenna has an omnidirectional pattern with enough gain to operate either on the uplink or the downlink for communicating through the various amateur radio satellites that use the 2m and 70cm bands. These 3D printed parts can be…
- Downloads
- 449
- Likes
- 61
- Rating
- 0
P
PrintablesRushman
Netgear Orbi 970 Series (WiFi 7) Router/Satellite) Wall Mount
I didn't want to spend $40USD per mount for the netgear wall brackets so I made my own. I printed in prusament PETG with a .6mm nozzle using draft fast settings in prusa slicer. They are beefy as the routers/satelites are quite heavy. YOU…
- Downloads
- 447
- Likes
- 19
- Rating
- 5
P
PrintablesazDave
QFH Antenna for 435 MHz Satellites
This is a 3D printed spiral support structure for the wires of a 435 MHz QFH antenna. The antenna provides a dome-shaped hemispherical pattern that is suitable for operation (transmit or receive) on various amateur radio orbiting…
- Downloads
- 427
- Likes
- 28
- Rating
- 4.5
P
PrintablesWizard
Prusa Mini Z Axis Satellite Dish Visualizer
I modified a design made for an Ender 3 to work with a Prusa Mini. Original link: https://www.thingiverse.com/thing:4054237 Super glue a 8mm X 3mm rare earth magnet to the bottom. Print instructions 40% Infill Use supports
- Downloads
- 400
- Likes
- 56
- Rating
- 5
P
Printablesj3zm0n7e
z axis Satellite Dish Visualization
I saw the other satellite dish and looked at the stl file but didn't like it so I made a new one. my first proper 3d object using tinkercad. It uses a 6mm x 3mm magnet to attach to the z axis stepper, print with supports on. Seti here we…
- Downloads
- 340
- Likes
- 40
- Rating
- 5
P
PrintablesTomson Design
Dayton Audio DMA80-8 3" satellite speaker
I made a Enclosure/Satellite speaker for Dayton Audio DMA80-8 3" Dual Magnet Aluminum Cone Full-Range Driver with Dayton Audio DMA80-PR 3" DMA Series Passive Radiator. The enclosure volume is made for vented to the spec. The walls is 8mm…
- Downloads
- 320
- Likes
- 43
- Rating
- 4.5
P
Printablesdrewwwau
NASA Worm Logo for Satellite - Space Shuttle Endeavour
A replacement for “xxx_-_sat_logo_w_b.stl” from the original model by Martin ( https://www.printables.com/model/628010-space-shuttle-endeavour ). I removed the “Prusa Research” text and replaced it with the NASA worm logo. Print using a…
- Downloads
- 293
- Likes
- 36
- Rating
- 4.8
P
PrintablesFC2M3D
Cute Satellite Keychain
Easy to make a cute Satellite keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
- Downloads
- 263
- Likes
- 36
- Rating
- 5
P
Printablesherbert
Satellite LNB Cover/Cap
This is a remix of https://www.thingiverse.com/thing:525413 I increased the height by adding an additional ring to cover my LNB properly
- Downloads
- 256
- Likes
- 5
- Rating
- 0
P
PrintablesTannis Root
Wyoming Satellite / Rhasspy case
Note: A new case design with potentially better microphone quality is available: https://www.printables.com/model/873274-fabric-wyoming-satellite-case Non-printed materials required for assembly 1) M2 8mm round head screw - 2 pieces 2) M2…
- Downloads
- 250
- Likes
- 47
- Rating
- 5
P
Printablesrebeltaz
Space Themed Game Pieces - UFO, Shuttle, Satellite and Rocket
These game pieces were designed for a contest for a board game. Since they were not selected as a winning entry, I am now offering them to you here for free. I'm thinking that, in addition to board game pieces, they might work good for…
- Downloads
- 233
- Likes
- 39
- Rating
- 5
P
PrintablesvagueDirector
Arma 3 - Altis 3D Map (Made from satellite imagery of Lemnos)
An 3D map of Altis. Source images acquired from: http://terrain.party/ Tutorial (not mine) which goes through the process: https://www.youtube.com/watch?v=cZxyN7esQkY Printed with a 0.4mm nozzle at 0.2mm layer height. Painted to add…
- Downloads
- 225
- Likes
- 40
- Rating
- 0
P
PrintablesSuam
Sputnik-1 – 3D Printed First Artificial Satellite
Celebrate the dawn of the Space Age with this detailed 3D printed model of Sputnik-1 , the first artificial satellite ever launched into orbit by the Soviet Union in 1957. With its iconic spherical shape and four antennae, this model is…
- Downloads
- 197
- Likes
- 16
- Rating
- 0
P
PrintablesTomson Design
Dayton Audio DMA70-8 2-1/2" satellite speaker
I made enclosure/satellite speaker for Dayton Audio DMA70-8 2-1/2" Dual Magnet Aluminum Cone Full-Range Driver and Dayton Audio DMA70-PR 2-1/2" DMA series Passive Radiator. The enclosure volume is made for vented to the spec. The walls is…
- Downloads
- 174
- Likes
- 28
- Rating
- 0
P
PrintablesJeanre
Satellite
One day I was browsing the internet and doing some basic research on satellites and was intrigued by their design and the flawless manner in which they orbit our planet. Considering that there was no obvious way to obtain a satellite for…
- Downloads
- 164
- Likes
- 35
- Rating
- 5
P
PrintablesTomson Design
Dayton Audio DMA58-8 2" satellite speaker
I made satellite speakers for Dayton Audio DMA58-8 2" with Dayton Audio DMA58-PR 2" DMA Series Passive Radiator. The enclosure volume is made for vented to the spec. It's built with tongue and groove for easy and strong assembly. Use low…
- Downloads
- 155
- Likes
- 15
- Rating
- 0
P
PrintablesMeneerHout
Bose Companion 3 Satellite Stands
Bose Companion 3 Satellite stands. Created with low profile so the speakers could be fitted in a small / low place. Please leave a like and show a "Make" if you printed this model, thank you. Print instructions Category: Audio Summary…
- Downloads
- 151
- Likes
- 17
- Rating
- 5
P
PrintablesR1CDM
AZEL_Satellite Antenna Rotator fixed details
Posted the fixed models here, so as not to produce copies on the sites. Link to rotator. Link for more info.
- Downloads
- 147
- Likes
- 14
- Rating
- 0
P
PrintablesSpinodal_Zeugma
Gaia Project: Satellite Token
This is a satellite token to replace the simple cubes that come with the board game Gaia Project. Print Settings Printer Brand: Creality Printer: Ender 5 **Rafts:** No Supports: No **Resolution:** 0.2 mm Nozzle; 0.08 mm Layer Height…
- Downloads
- 144
- Likes
- 11
- Rating
- 0
P
PrintablesValentin
OneWeb Gen1 satellite 1:25 model
With this model you can get a small piece of the OneWeb Gen1 constellation on your desk. Since February 2019 more than 600 of them have reached or are en route to their 1200km @ 87.9deg working orbit ! This ~1:25 model was prepared based…
- Downloads
- 141
- Likes
- 16
- Rating
- 5
P
PrintablesDIVIIK
Galileo Navigation Satellite Model
A remix from dominic_97 Category: 3D Printing
- Downloads
- 136
- Likes
- 18
- Rating
- 5
P
Printables3D-Muc
RC Spektrum Satellit Frame Holder
Frame Holder for a RC Spektrum Satellit You can glue the holder into the model The satellite is stuck in the frame Print Settings Printer Brand: Anet Printer: A6 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0,2 Infill: 20…
- Downloads
- 129
- Likes
- 13
- Rating
- 5
P
PrintablesSuam
Orbital Satellite Megallan Model– Deep Space 3D Printable Craft
Launch your creativity into orbit with this detailed 3D model of a scientific communication satellite , inspired by real-world spacecrafts used for space exploration and data transmission. Ideal for aerospace fans, model collectors, or…
- Downloads
- 122
- Likes
- 20
- Rating
- 0
P
PrintablesD3D
Satellite Tower
Originally designed for the 2022 LM Show Christmas Community Print Drive! SPACE is our theme this year! Print and help us ship 3D printed toys to children and families in-need, all over the world!…
- Downloads
- 122
- Likes
- 29
- Rating
- 5
P
PrintablesTerraMakers.com
Continental vs Oceanic Crust of the Earth Based on Up-to-Date VGG Satellite Data
The model was made by Jan Mestan.
- Downloads
- 114
- Likes
- 14
- Rating
- 0
P
PrintablesCY95
Home Assistant Wyoming Satellite with Jabra410 and RPI zero 2w
Wyoming Satellite based on Jabra 410 and Raspberry Pi Zero 2W This guide explains how to build a Wyoming satellite using a Jabra 410 speakerphone and a Raspberry Pi Zero 2W. Bill of Materials (BOM) Jabra 410 (Jabra 510 should be…
- Downloads
- 114
- Likes
- 20
- Rating
- 5
P
PrintablesSzaja
Middle part for weather satellite antenna
Modified middle part of the weather satellite antenna
- Downloads
- 111
- Likes
- 11
- Rating
- 0
P
PrintablesRumen Hristov
Satellite LNB Cover/Cap Bulsatcom ver.2
Printer - Bambulab P1P Material - recomended PETG Support - yes Infil - 20%
- Downloads
- 98
- Likes
- 1
- Rating
- 0
P
PrintablesMeneerHout
Bose Companion 3 Satellite Wall Mounts
Bose Companion 3 Satellite wall mounts. Please leave a like and show a "Make" if you printed this model, thank you. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: Yes Resolution: 0.2 Infill: 40…
- Downloads
- 97
- Likes
- 8
- Rating
- 0
P
PrintablesAndrew
Custom Shimano Di2 Satellite Shifter Button Housings
A collection of custom Shimano Di2 satellite shifter button housings
- Downloads
- 96
- Likes
- 4
- Rating
- 0
P
PrintablesSuperWilli
Wyoming Satellite Pi Zero + Respeaker Hat
Just a quick and easy enclosure for housing a wyoming satellite consisting of a Raspberry Pi Zero 2W, Respeaker 2 Hat and this speaker (the 8Ohm 10 Watt Variant). Print everything without supports, depending on your printer you might need…
- Downloads
- 91
- Likes
- 15
- Rating
- 5
P
PrintablesDA-Osborne
Canton Movie 10-MX II Satellite Wall Mount
A modification to falichs' Canton MX speaker mount to allow Canton 10-MX satellite speakers to be directly mounted to the wall. (I lost the original wall mounts) Design allows cable to be hidden inside the wall. Modified with tinkercad.…
- Downloads
- 85
- Likes
- 5
- Rating
- 0
P
PrintablesDwayne
Satellite Dish
SETI Style N Scale appropriate sattelite dish.
- Downloads
- 83
- Likes
- 2
- Rating
- 0
P
PrintablesAlzibiff
Dipole mount for weather satellite reception
The purpose of these files are to provide a means of mounting two aluminium rods to a length of 32mm waste pipe. Why? To form a dipole antenna for the reception of NOAA satellite data on the 137MHz band using an SDR receiver. Basic…
- Downloads
- 81
- Likes
- 9
- Rating
- 0
P
PrintablesDale
My best X-37B with opening PL bay doors plus satellite
I provide my models for everyone to print and use but if you want to help me pay for the filament it takes to design these, then buy me some coffee sometime https://buymeacoffee.com/daleshell 11/14/2024: For those of you who are…
- Downloads
- 81
- Likes
- 7
- Rating
- 0
P
PrintablesLambOfCAD
Tachikoma AI Satellite, Ghost in the Shell
Tachikoma AI Satellite as seen in GITS SAC 2nd Gig Included: .3MF, .STL, .STEP
- Downloads
- 80
- Likes
- 18
- Rating
- 5
P
PrintablesOnilCreations
Armada Cinder Satellites
Operation Cinder Satellites for SW:Armada. They fit on Irregular/mono squadron base.Designed for resin 3D printer best print with 20 micron layer no AA. If you like my work and want to support me you can visit my Etsy shop:…
- Downloads
- 79
- Likes
- 10
- Rating
- 0
P
Printablesprimo
Weather Satellite Pipe Antenna
The aim of this project is to create a portable antenna system to receive NOAA weather satellite imagery. The original antenna design stems from 9A4QV (Adam). Additionally there is a YouTube video from Tech Minds which shows how to do the…
- Downloads
- 79
- Likes
- 15
- Rating
- 0
P
PrintablesJoe!
Stand for Bose Satellites Speaker - Version II
The compact speaker stand for Bose satellites are designed in one piece. The speaker cable is routed inside the stand so that it is not visible. It first comes out of the base at the back. Due to the size, the speaker stand is ideal for a…
- Downloads
- 78
- Likes
- 15
- Rating
- 5
P
Printables3DMason
NASA Ka-Band Satellite Beacon Receiver
This model is a Ka-band satellite beacon receiver designed to measure and characterize the impact of the atmospheric on satellite communication at 20 GHz. Author/Origin: Michael Zemba, NASA/GRC, Advanced High Frequency Branch. GitHub:…
- Downloads
- 78
- Likes
- 27
- Rating
- 5
P
PrintablesHikingWithCam
Arrow Satellite Antenna Gamma Match Protector
I printed these in the vertical orientation, with support only for the small cutout at the base. I did not use support material for the top (flat part with hole), and it came out fine on my printer. Link to video here.
- Downloads
- 74
- Likes
- 13
- Rating
- 0
P
PrintablesDavid H
Speaker Corner Mount - Universal Bracket for Satellite Speakers
This is a corner bracket for mounting a Satellite Speaker to a wall. Print in ABS, support free. To use this you'll need one M3 Bolt (about 16 - 20 mm), an M3 nut (not nylock), two wall plugs and two screws to match. After fitting on the…
- Downloads
- 73
- Likes
- 13
- Rating
- 5
P
PrintablesValentin
TUBIN microsatellite 1:10 model
TUBIN (Technische Universität Berlin Infrared Nanosatellite) is a university nanosatellite mission with the objective to demonstrate novel Earth remote sensing technologies for nanosatellites. It was launched on June 30, 2021 on a SpaceX…
- Downloads
- 73
- Likes
- 15
- Rating
- 0
P
PrintablesAnder Orbegozo
Satellite1 Dev FutureProofHomes minimal case V2
Case for FutureProofHomes Satellite1 Dev . This case is not the official one, it is designed to encase just the dev kit in the smallest size possible in case your using a external speaker. This is an updated version that does not require…
- Downloads
- 72
- Likes
- 12
- Rating
- 5
P
Printableszx82net
ZX82 2.1ch Subwoofer & Satellite Loudspeaker System
This great sub-sat system requires a print area of 200x200mm for the subwoofer, and slightly less for the satellites. These use sealed speaker modules from Tang Band; the full range T1-2121SD in the satellites, and the T2-2181SA subwoofer…
- Downloads
- 70
- Likes
- 20
- Rating
- 0
P
Printablesdthree
Home Assistant Voice Satellite Enclosure
UPDATED V2 Lid: removed unnecessary mic “slots”, rotated snap closure to raise from the back first (allows speaker magnet to clear circuit board) Case: rotated snap closure to match lid LED lens: adjusted size (adjust X-Y contour for good…
- Downloads
- 68
- Likes
- 19
- Rating
- 0
P
Printablesrab
80cm/100cm Parabolic Satellite Dish
This parabolic dish consists of 3 parts: ring0_v4 (Inner ring) ring1_v4 (Mid ring) ring2_v4 (Outer ring used for a 100cm diameter dish) or ring2_v4_modified (Used for a ~80cm diameter dish) 12x of each of the 3 segments are required to…
- Downloads
- 66
- Likes
- 6
- Rating
- 0
P
PrintablesKristoffer Grøtte Pinderud
Grundig Satellit 3400 knob
Replacement knob for Grundig Satellit 3400
- Downloads
- 66
- Likes
- 1
- Rating
- 0
P
PrintablesKiera
Vanguard 1 Satellite
Vanguard was supposed to be the US's first artificial satellite. It missed that honor and ended up second. This is an openscad model of the Vanguard 1 satellite. Sadly there is a lack of detailed measurement data available for this…
- Downloads
- 66
- Likes
- 5
- Rating
- 0
P
Printableskillowatt
120deg tape measure noaa satellite antenna
Designed to be a simple and portable 120deg antenna for noaa satellite use. This antenna uses tape measure elements and should fit any pipe or stick smaller than 33.5mm (1 in pvc) by using longer screws. Category: Electronics
- Downloads
- 63
- Likes
- 10
- Rating
- 5
P
Printablesmulymule
SatTrack - Gyro 3D POV Aim assist for Satellite Tracking
NOTE: THIS IS FOR TOUCH VERSION ONLY ON THE T-DISPLAY S3; I am working on the non-touch version of the model which will come in a future update. there is now a GPS Version which I’ve uploaded as a remix, otherwise it’s all the same! QUICK…
- Downloads
- 62
- Likes
- 30
- Rating
- 5
P
PrintablesAnders Bergh
Northern Arc - Satellite One
Satellite One is a minimalist satellite speaker enclosure designed for modern interiors and optimized for high-quality 3D printing. Combining clean Scandinavian-inspired aesthetics with practical acoustic construction, Satellite One…
- Downloads
- 61
- Likes
- 26
- Rating
- 0
P
PrintablesJwidess
Samsung Satellite Speaker Wall Mount
This model allows easy mounting of a Samsung PS-ES3-2 speaker to a wall. I've created two versions of this mount, the original with a 10° down and inward angle relative to the wall and a second with an increased 15° downward angle. The…
- Downloads
- 61
- Likes
- 7
- Rating
- 0
P
PrintablesBYU CMR
Flexlinks: "Satellite"
Summary FlexLinks were developed for quick turn-around proof-of-concept prototyping of compliant mechanisms by the BYU Compliant Mechanism Research Group. Combined with commercially available toys, custom compliant components can be used…
- Downloads
- 60
- Likes
- 28
- Rating
- 5
P
PrintablesFlonicar
Teufel satellite speaker Effect wall mount
I have constructed a wall mounting for my Teufel satellite speakers effect. There are 6mm drill holes for mounting. I printed the wall mounting in PETG.
- Downloads
- 60
- Likes
- 6
- Rating
- 0
P
PrintablesGlork11
ISS cadre avec satellite
Station spatiale international avec support et satellite. Les panneaux solaires servent de cadre (fusées non fournies)
- Downloads
- 56
- Likes
- 14
- Rating
- 0
P
PrintablesMAGNETO - IZ0GIF
Yagi VHF-UHF for portable satellite operations + UV-K5 support
I designed these element mounts to build a dual-band Yagi antenna for portable amateur radio satellite operations and UV-K5 transceiver. For the boom, I used a 20 mm plastic tube used for electrical installations. Antenna elements - 6 mm…
- Downloads
- 55
- Likes
- 9
- Rating
- 0
P
PrintablesThe QuickSilver
Wide Field of View (WFOV) Satellite
this is not an official model from Millennium, just a fan model made using public reference photos from this link ( https://space.skyrocket.de/doc_sdat/wfov.htm ). as such, some artistic liberties were taken. using the parametric pin…
- Downloads
- 55
- Likes
- 2
- Rating
- 5
P
PrintablesSetup
JBL 5.1.2 Soundbar Wireless Satellite Cover
I really hated the look of the raw JBL 5.1 soundbar with the two satellites detached, so I created covers for the main bar.
- Downloads
- 55
- Likes
- 6
- Rating
- 0
P
PrintablesMattHecht
DISHY MOUNT FOR SATELLITE DISH POLE
This mount was created to mount the StarLink dish to an existing satellite dish pole. The mount uses a 2" hose clamp to holed the mount to the satellite pole. Feed the StarLink cable through satellite pole and through the mount, then plug…
- Downloads
- 54
- Likes
- 2
- Rating
- 0
P
PrintablesStarkGER
Holder for satellite speaker (e.g Logitech Z906 Speaker)
Well, it finally happened. My S/O destroyed a thing. This time the victim was my satellite speaker. Specifically the holder of it. So Fusion it was and after about 30min + 40min printing time, it was done. Works like a charm. (Even tho,…
- Downloads
- 53
- Likes
- 9
- Rating
- 0
P
PrintablesKevDoy
Vizio Satellite (Rear) Speaker Command Strip Mounts
Lost Vizio Satellite/Rear speaker mounts and screws? Don't want to put holes in your walls? This may be the solution to mount your speakers. Using generic M4 x 8mm screws with a built-in attached washer (see photos), and these prints, I…
- Downloads
- 53
- Likes
- 6
- Rating
- 0
P
PrintablesValentin
Ohsumi satellite 1:10 model
After 4 failed attempts, Japan reached orbit using the Lambda-4S launcher with the small “Oshumi” satellite on February 11, 1970. Placed on an elliptical 350x5140km @ 31deg orbit, it reentered the atmosphere in 2003. You can find…
- Downloads
- 49
- Likes
- 15
- Rating
- 0
P
PrintablesQuadView
Orbi Satellite Wall Holder
Wanted to put the Orbi on the wall and out of the way. Super simple print. Print with the orientation of the top on the print bed Mount to the wall. Route the wires through the holes up and plug into the Orbi Then attach the Orbi to the…
- Downloads
- 48
- Likes
- 2
- Rating
- 0
P
PrintablesCellerich
Rhasspy/Wyoming - Jabra Voice Assitant Satellite case
Ever wanted to get rid of Google Home or Alexa? With Rhasspy (soon integrated with HomeAssistant ) you can create your own "Voice Assistant" which runs in your own home without calling to outside servers to understand you. I'm about to…
- Downloads
- 47
- Likes
- 9
- Rating
- 0
P
PrintablesVoltaic Enclosures
Satellite Dish Antenna Bracket Sleeve For Galvanized Pipe
This small kit will allow you to repurpose a satellite dish bracket as an antenna mast. It creates a snug fit between a standard galvanized pole (see below) and a satellite dish mounting bracket. It keeps the pole from wobbling inside the…
- Downloads
- 44
- Likes
- 13
- Rating
- 5
P
PrintablesRodney Curtis
NOAA Satellite Antenna Bracket
Utilize to create an antenna for capturing NOAA weather satellites
- Downloads
- 44
- Likes
- 2
- Rating
- 0
P
Printablesszelenka
Mammotion Yuka/Luba 2 RTK 1.46in Satellite Dish Mount
We modified the source model to adjust the inner-diameter for fitting the 1.46in Electronics Pole for Outside Home Antenna Installation . Used metal screws to secure the printed part to the Pole, and the RTK screws in on the top.
- Downloads
- 43
- Likes
- 5
- Rating
- 0
P
PrintablesDiggity
Spektrum satellite mount
This is a great way to keep your satellite in place during flight.
- Downloads
- 43
- Likes
- 2
- Rating
- 0
P
PrintablesGentoshi
Home Assistant Satellite Enclosure for Raspberry Pi Zero 2 W + ReSpeaker 2-Mic HAT
This compact and practical enclosure is designed specifically for a Home Assistant satellite node powered by a Raspberry Pi Zero 2 W, paired with a reSpeaker 2-Mic Pi HAT (v2.0) and a small speaker. It’s perfect for extending voice…
- Downloads
- 42
- Likes
- 4
- Rating
- 0
P
PrintablesPaul Inkenbrandt
LANDSAT 9 Satellite
Landsat 9 is the latest satellite in the Landsat series. It will continue Landsat's irreplaceable record of Earth's land surface upon its September 2021 launch. Landsat 9 will carry two science instruments. Both instruments have sensors…
- Downloads
- 38
- Likes
- 2
- Rating
- 0
P
PrintablesKingWarin
Rhasspy / Wyoming Satellite Round Case / PiZero 2W + ReSpeaker 2Mic + large speaker
This is a simple case to house a RPi Zero2W with ReSpeaker 2Mic-HAT and a speaker with similiar size to the Pi (I use this https://cdn.shopify.com/s/files/1/1509/1638/files/Speaker_mini_3W_datasheet.pdf?v=1646837386 ). //Update…
- Downloads
- 35
- Likes
- 6
- Rating
- 0
P
Printablesjackharvest
Starlink Satellite Gen2 (Generation 2) 48mm (1.89in) Chain Link Fence Post Adapter
Please note, this doesn't have the lock mechanism (it would be pretty easy to add, just haven't done it yet cause I was too excited to get this up and running, lol). The weight of the Satellite should be plenty to keep in place for now. I…
- Downloads
- 35
- Likes
- 9
- Rating
- 0
P
PrintablesNWBITRNCS
Newbietronics SAT31 Satellite Speaker 3"+1" Speaker Box Enclosure
Description Made for home theater systems and 2.1 channel desktop systems. a dedicated subwoofer is highly recommended (coming soon?). Crossover at around 200hz for subwoofer. More detail coming soon… Have questions? Please post a comment…
- Downloads
- 34
- Likes
- 8
- Rating
- 0
P
PrintablesVinni
Adjustable Speaker Mount / Jointed Arm for Satellite Speakers
This adjustable speaker mount is designed for light to medium satellite speakers and consists of four separate flat-printable parts to maximize strength along the print layers. The joints are connected using pins with 0.2 mm tolerance ,…
- Downloads
- 34
- Likes
- 6
- Rating
- 0
P
PrintablesMAKERTEAM®
Holder for CANTON dolby surround satellite loudspeaker box
This holder is made for CANTON satellite loudspeakers that are often included to dolby surround systems for home cinema entertainment systems. I designed them for our party cellar which has a 19-20mm strong wooden wall shroud panelling.…
- Downloads
- 34
- Likes
- 4
- Rating
- 0
P
PrintablesNerys
Estes 2003 SDI Satellite Kit Nose Cone modded for printability
Estes 2003 SDI Satellite Kit Nose Cone modded for printability Should be the original scale. separated into pieces and threading added. no support needed I print with 3 top 3 bottom 0.2mm layers 2 walls 5-10% infill (as light as you can…
- Downloads
- 33
- Likes
- 4
- Rating
- 0
P
PrintablesRanppa
Samsung Soundbar Satellite Speaker Pole
Simple stand for Samsung soundbar satellite speakers. Print the parts in PETG and use M8 bolts and t-slot nuts to mount them. I used 40x40mm aluminium extrusion for the pole itself.
- Downloads
- 32
- Likes
- 6
- Rating
- 0
P
PrintablesIgnacio Gabriel
Rear or satellite speaker mounts for back of bed, with optimal angular positioning
Rear or Satellite Speaker Mounts with Optimal Angle Positioning Technical Design for Surround Sound Systems This advanced design offers a practical and efficient solution for mounting rear or satellite speakers in surround sound…
- Downloads
- 31
- Likes
- 4
- Rating
- 0
P
Printablesdudzio1222
Severance Inspired Wyoming Satellite (AI Assistant)
New mounting fits: - Raspberry Pi Zero 2 W - reSpeaker 2-mic Hat - Waveshare speaker https://www.waveshare.com/product/displays/accessories/speakers/8ohm-5w-speaker.htm - some M3 screws to mount it to the case from the bottom (4-8mm will…
- Downloads
- 31
- Likes
- 14
- Rating
- 0
P
PrintablesIllumine
Speaker Wall Mount for M5 Satellite Speakers Klipsch ProMedia 2.1
Speaker mount for the Klipsch Pro Media 2.1 also works with other small satellite with a M5 mouting thread on the bottom. Fit is a bit tight on some printers, may want to scale down slightly Printed in PETG @ 0.20 layer height. Print with…
- Downloads
- 31
- Likes
- 3
- Rating
- 0
P
PrintablesJoergH
Grundig Akku 476 für Satellit 600 650 1400 2400 3400
An keiner Stelle im Internet konnte ich ein Gehäuse für einen 476 Akkuumbau finden. Weltweit das Erste ? Kaum zu glauben. Gedruckt hatte ich schon, passt gut, jedoch fehlte mir immer die Zeit, da noch ein paar 18650 einzubauen. Drucken…
- Downloads
- 31
- Likes
- 3
- Rating
- 0
P
Printablestomkocur
BMR micro satellite (Tectonic Elements TEBM35C10-4)
Nozzle: 0.6mm for best results Material: PLA, ABS Supports: Not needed Micro satellite speaker utilizing a BMR designed to stand upright (using an additional stand) or be laid flat under a TV/PC monitor. Thanks to super wide radiation of…
- Downloads
- 30
- Likes
- 0
- Rating
- 0
P
PrintablesJoe!
Stand for Bose Satellites Speaker
The compact speaker stand for Bose satellites are designed in one piece. The speaker cable is routed inside the stand so that it is not visible. It first comes out of the base at the back. Due to the size, the speaker stand is ideal for a…
- Downloads
- 30
- Likes
- 8
- Rating
- 0
P
PrintablesThe QuickSilver
Wide Field of View (WFOV) Satellite v2 with arm joint and mount
the end caps for the satellite model mount are here, the basic ones are in the original model link the solar panels are the same as the original WFOV model link
- Downloads
- 30
- Likes
- 1
- Rating
- 0
P
PrintablesFrank 3D
Nighthawk Mesh Network Satellite Holdig Tray
This is a very simple holder to support a satellite for a Nighthawk Mesh Network Router. I needed to hang it in a very obscure place on a single 2x4. May not fit your particular purpose, however, there are three versions. (1) with (2)…
- Downloads
- 30
- Likes
- 8
- Rating
- 5
P
PrintablesAirplaneIan
SpotX Satellite Communicator Desk Cradle
A very basic desk cradle to hold a SpotX handheld satellite communicator. I have a charging station for handheld radios and needed something to make the SpotX fit in next to my other gear.
- Downloads
- 29
- Likes
- 1
- Rating
- 0
P
Printablesmulymule
3D-POV Gyro Satellite Tracker with GPS
Please look at the original post for main instructions Added BoM Items are a GY-GPS6MV2 GPS module, with TX on the board to GPIO. on ESP32 and RX to GPIO 13 https://github.com/mulymule/SatTrack/tree/main (Note this Repository is only for…
- Downloads
- 28
- Likes
- 13
- Rating
- 0