128 models
Lucky charm gift for New Year's Eve with a function! The coin included in the horseshoe clip for the keychain can be used as a token for any shopping cart. On the coin is on one side a shamrock on the other side the number 26 for 2026…
This piece is currently a work in progress as I have not finished printing it or tested it yet. NOTICE: This suppressor is intended only for use on BB guns / Air Rifles. This in no way is meant for production for or use on actual…
Safety Glasses Holder Remix from Byte Slinger for wall mounting. Brillen-/Schutzbrillenhalter Remix von Byte Slinger für Wandmontage. Für Schutzbrillen empfehle ich das Modell auf 110% zu skalieren. For Safety glasses I recommend scaling…
This is a replacement interior panel for the Ghostbusters Haslab Proton Pack. This panel includes a cut out for a Talentcell 3000mah Battery Pack: https://amzn.to/3HDwbBf Uses a USB cable mod from GBFans.com:…
2026 Gimbal Lucky Charm / Glücksbringer with different ring clearances from 0,20 mm to 0,35 mm. Beside the different clearances, the Gimbal Lucky Charm is also available in different versions: 2026, for single tool 2026, for multi…
sehr schnell druckbarer Glücksbringer für Silvester in verschiedenen Varianten keine MMU nötig, einfach Materialwechsel bei 2mm einfügen Very fast printable talisman / lucky charms for New Year's Eve No MMU needed, simply a material…
sehr schnell druckbarer Glücksbringer für Silveste kann mit und Ohne MMU gedruckt werden, ohne MMU einen Materialwechsel bei 3mm einfügen Very fast printable talisman / lucky charms for New Year's Eve Can be printed with and without MMU;…
Give the gift of happiness for the new year! Simply combine a 1 euro cent coin with this 3D print and put a smile on someone's face! I wish you a happy new year and good health in the coming year! (I printed with a 0.4 mm nozzle and 0.2…
sehr schnell druckbarer Glücksbringer für Silvester / Very fast printable talisman / lucky charms for New Year's Eve
Ikea BILLSBRO Handle 120mm No supports needed. Dont have the original or exact dimension so its modeled from images. Fits perfect. Mounting is with 2 Wood Screws or can be used double sided tape. The model is 2mm thick so its not for…
This Project was made for a friend, and there the sizes seams to fit well. So here the disclaimer: I did not check the size for myself, please use the FreeCAD file if you need so! Here I give you an STL to repair a may broken slider from…
This model is something I made based on a lack of an existing “perfect” solution. I wanted to convert the crappy peg-on Spirit Halloween 80% wand to a printed V hook that doesn't easily break and can be later converted to use for a Hasbro…
Glücksbringer für Silvester ------- lucky charm for New years eve
UPDATE - 22 November 2020 Added a set of new caps for Aux Jack mods. There is a flat cap with Aux Jack. Additionally, there are caps with the 3/4" stub with just the jack, the jack + 2 circuit holes, and the jack + 4 circuit holes. There…
Give the gift of happiness for the new year! Simply glue the 1 euro cent coin to this 3D print and put a smile on someone's face! I wish you a happy new year and good health in the coming year! print around 98%-99% for snapfit. Happy…
This is a reversible wand tip modification for the Hasbro Neutrona Wand. Simply press the printed part over the existing tip. The fit is very snug, so it shouldn't fly off during normal use. I've tested it on both the Spengler wand and…
super rigid upgrade that holds the 2020 alu profiles together to minimize flex, i printed them in PETG and they are definitely rigid The Machine isn't flimsy, but well, every little bit helps to be able to push the machine You might need…
This will work perfectly and exact on your hasbro proto starter launchers. Enjoy!
PLA Füllung 20% Schichthöhe 0,3mm ohne Stützen, ohne Rand
These are a friction fit, press in mod that requires no permanent modifications to your 1984 hasbro proton pack. They can be a tight fit, so use caution. These files were created using reference from…
Allow you to easily to center the holes of billsbro handles. Measure half ot the distance, align with the center cutout, then mark the 2 holes to drill.
Updated serial carrier for PCB SBr1.1 that has a hole for the SCD40 sensor.
This is a replacement ice cube for the Hasbro “Don't Break The Ice” game (non-vintage model). It is a relatively straightforward print. Printing Orientation You can print this either face down or face up. You can print it face-up with…
Remake of 3D Workbench Revolver (Needs to Be Broken up) . Converted in to a Longer Barrel SBR. ***UPDATE*** This is NOT my original model : Original Models were done by 3D Workbench…
Stand for the Star Wars Black Series Kylo Ren Lightsaber Force FX by Hasbro A hole in the bottom has been added to prevent the lightsaber to swing back and forth Printed using pla with 15-20% infill, no supports needed Height: 265 mm…
Kleine Glücksbringer für 2024 aus 2 Teilen die verklebt oder verpresst weden können. 3 Varianten für dioe Halterung: 2024, PROSIT 2024, HAPPY 2024 Lucky charm for 2024. 2 seperate parts to be glued or pressed. 3 holder types: 2024, PROSIT…
Hello, I added a bigger "2026" on the back instead of the cut out. It works great with my AMS Lite on a Bambu A1 mini. Try printing it in 98-99% size to get a snap-fit for the 1 Cent (Euro) coin. Happy New Year!!
Fits for Gardena garden shower type 18911-20 and 18910-20 (Front of showerhead ca. Ø58; neck ca. Ø35,5mm) Possible materials: all materials possible, Asa or Extrudr Greentec because its UV-Stable Reccomendet Nozzle-Ø: 0,4 Printable on…
Der Ersteller der Dateien übernimmt keine Gewähr für die Qualität oder Fehlerfreiheit der von ihm veröffentlichten Inhalte und haftet gegenüber Dateinutzern nicht für Schäden, die durch deren Nutzung entstehen.
Remake of 3D Workbench Revolver (Needs to Be Broken up). Converted to a Longer Barrel and added a stock.
Need an easier way to take down your Beyblade stadium? These quick release locks have you covered! Simply insert and twist to lock in place. Features a raised and textured design for easy removal. Tested to fit the Hasbro stadium but may…
These SBR16 rail holders are removable and do not have to drill the base of the Snapmaker.
Meine Tochter hat leider das Futter von der Katze verloren und ich habe dies anhand eines Fotos nachmachen können. Für alle Eltern die keinen 3D Drucker haben, ihr könnt euch gerne melden, ich Drucke euch das dann ;-) ich kenne das…
white until 6.8mm finish with red
Version 2 More clothing friendly, radiused contact edge. The old one wasn't a big deal with jeans but could be a little hard on a tucked shirt. No rise. (0 degree rise. (Actually 0.01 degree but that's a limitation of the way I initially…
Mountainrelief of several tirolian peaks
Designed this sleeve for carrying around a spare battery for the Yaesu Ft5dr. Specifically the SBR-14Li battery. Its nothing fancy just practical and keeps the contacts from shorting inside a bag or pocket.
Beschreibung Ich liebe Frühstücksbrettchen, leider ist es schwierig sie nach dem reinigen zum trocknen aufzustellen, der Ständer schafft Abhilfe. Description I love breakfast boards, unfortunately it is difficult to put them up to dry…
Dank einer kostenlosen Vorlage im Internet habe ich dieses Knotenübungsbrett mit Ring, Klampe, Poller und Reling erzeugt. Empfehlenswert wäre hier, mehr Füllung zu geben, da die Seile bzw. Knoten einen gewissen Druck erzeugen könnten.
The '84 version of the Hasbro Neutrona Wand does not have a painted hat light on the main body like the Spengler version does. This is a simple cover that fits very snug, so no glue is needed. Just print and press on. I printed mine with…
While I liked the look of the stand that shipped with this prop, I found it pretty flimsy. I took measurements and copied of the parts I liked into a new Fusion 360 model. This print is much more stiff than the original stand and works…
fast printed lucky charms
3 Hufeisen als Glücksbringer für das neue Jahr. Einfach nach belieben Skalieren und als Schlüsselanhänger oder Wandbild verschenken. Viel Spaß und guten Rutsch ins Neue Jahr.
sehr schnell druckbarer Glücksbringer für Silvester / Very fast printable talisman / lucky charms for New Year's Eve
A Hueforge manga panel of Gyro Zeppeli from JJBA: Steel Ball Run. If you try to print this, I would like to know how it looks like with darker blue (originally used as shading, but I don't have a blue filament that dark). I'd be glad to…
this model is not intended for heavy usage and may break. this dagger features small blade serrations and a glassbreaker for breaking windows (this model is not sharp.) (warning: this model is untested. the glassbreaker may not work and…
//* Nerf dart carrier uploaded, sorry I forget it Recently I bought a Tie Striker in a flea market without a wing. My son was so excited with it that I did a spare wing for replace the missing one. There is two versions: Ala.stl is the…
This is a modification to the End Cap to allow you to use the CNLINKO LP-16 M16 Connector https://www.amazon.com/dp/B0816BMDKQ?ref_=cm_sw_r_apin_dp_Z64RTF47HAMNZWPDRRAZ I had another person make this for me based on the original design
Set of grips for Hasbro starter launchers Easy to use and ready to install. You can choose from couple of different sizes . Find yours and get ready to fight! The starter launcher is supposed to easily click in. If you're having trouble…
Why print a rail? Real SBR20 rails are heavy, long, and hard to cut. This printable model is perfect for: Mocking up builds: Visualize your frame size and component placement before ordering hardware. Fit Testing: Check if your 3D printed…
This massive stairs was printed on my Anycubic Chiron with 0.6mm Nozzle, 2 Walls and 8% Infill, without any supports but 30mm brim! Filament Use was about 400g. On the highest point it is 416mm high. To print the right side of the stairs,…
Dry your breakfast boards Category: Kitchen & Dining
Diesen Schlüsselanhänger habe ich für meine Kranke Mutter gemacht. Er besteht aus dem Chinesischen Shou Lotus und bedeuted langes Leben, Gesundheit und Heilung. auf der rückseite ist der Marienkäfer für Glück, Gesundheit und Wohlstand.…
Ein Glücksbringer zB zum Aufkleben auf eine kleine Schokolade.
Halter für Schneidebretter / Frühstücksbretter. Kein Umfallen oder wegrutschen mehr.
Standfuss für Gasbrenner ( GB-2001 ) aus dem letzten Jahrtausend ( Ca. 1992 ) - Guter Stand - Satte Klemmung - IDØ 36mm ( 1992 ) - In “jedem” Winkel verwendbar - Bohrung zum Wiederbefüllen - IDØ 15mm Apropos Gas-Brenner: Ü30 und läuft wie…
A small endstop for the SBR16 linear rail system, designed to fit snugly over the end and screw down using M4 screws/bolts. Be aware that this is designed to be small and light and to stop some who is manually moving something on the rail…
I'm a happy user of @Stephenlofgren's TYWE3S jig. Since the carrier board dimensions for the CB3S are identical, I thought I could get away with using it to flash OpenBK onto a Xenon SM-SO301U power strip. After a lot of fiddling and…
Modification of @Fabian_309043's modified serial carrier, to allow clearance for the SBR 1.1 boards.
Achs-bremse zur Ergänzung der Kombination verschiedene Spulenkerne. Bei der Verwendung von: https://www.prusaprinters.org/de/prints/39588-filament-spulenkerne-mit-intigriertem-kugellager Bei mir Liefen einige Spulen zu leicht z.B. PC…
I have made a MK2 of my model, as I found the slot for the belt clip was not wide enough for either the official Yaesu clip, or my printed one. So slot on that one is 22mm wide and slightly less long, as not to expose the contacts.
Ein Schnapsbrett perfekt für den Polterabend. Wiegt zusammen knapp unter 700g -> perfekt zum tragen. Habe es mit 10% Füllung gedruckt.
Just a couple things I modeled up to replace parts on my boys toy lightsabers. No supports required for anything, just print them with the flat base on the bed. The blade takes a litte bit to get it worked loose, but after that it's…
Description This is a robust dovetail mounting system designed specifically for SBR20 linear rail sliding blocks (SBR20UU) . I created this mechanism to allow for modular, quick-change attachments on linear motion projects without…
I have upgraded the bracing kit for my snapmakerA350, so a revision of the sbr16 mod was also necessary. Suitable for the Snapmaker A350 new bed with installed bracing plates without quick swap kit! This time I wanted an adjustable…
Hasbro Clone Helmet Targeting System functional
Card bracked for all banknotes and item cards
Hasbro's Battle Droid Blaster is one of the most accurate toy props they have ever released. That is not to say it doesn't have a few imperfections but this upgrade kit will help fix them! THIS IS NOT A FULL MODEL OF THE BLASTER. Just…
A printable version of the presidents stand.
My xAxisBracket for perfect Articulating Raspberry Pi Camera Mount for Ender 3 or Ender 3 PRO. Required: screw M3 x 10mm hex bolts square nut M3 Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2 -…
Overview I designed this part to simplify the process of turning a standard SBR20 rail into a motorized linear actuator. Instead of designing a complex separate motor mount and idler system, this part clips directly onto the end of the…
Frühstücksbrettchen-Ständer für den Küchenschrank Du kennst das Problem: Frühstücksbrettchen liegen gestapelt im Schrank, rutschen ständig umher oder nehmen unnötig viel Platz weg. Dafür habe ich diesen einfachen und platzsparenden…
Glücksbringer für Silveste lucky charm for New years eve
ReadMe.txt Messbrücke Material: PLA Schichtdicke: 0,2mm besser 0,1mm Füllung: 25% Nacharbeiten: Gewinde schneiden entgraten Die Messbrücke ist noch im Entwicklungsstadium. Eine Überarbeitung der Einzelteile steht noch aus. Die Fixierung…
Dies ist ein Remix vom großartigen Brillenmodel https://www.printables.com/de/model/203781-3dbk-frames. Die Augen müssen aufgeklebt werden. Die beweglichen Augen müsse natürlich vorher eingelegt werden. Die Bügel für die Brille sind vom…
Installed linear rails to get rid of flexing of the workplate of my Snapmaker 2.0. The rail holders screw into the base of the linear modules, allowing an installation without drilling the base. This model is a re-design/remix to fit…
My first 3d model, so it could certainly be improved. The original steering wheel's spokes formed a “T” with the top third of the wheel not having an spokes in it. Changed this to be more of an “X” shape to allow my toddler to turn the…
DE 🇩🇪 „Diese 3D‑Chassis‑Modelle zeigen das finale Innenleben eines modularen R2‑D2‑Projekts. Sie dienen als Referenz, um ein bestehendes Hasbro-2002‑R2‑D2‑Modell mechanisch und elektronisch zu tunen (Elektronik, Sound, Licht, Bewegung –…
For Besbro A901 blaster! 12/24/21 UPDATE: ADDED Spacer/Insert for plunger side of spring. Should prevent open-ended springs (K27 etc.) from squeezing past the stock resting spot and gumming up the blaster. Experimental. Modified retainer…
Crossbrace for the E-TOXX boardstand, so you can work on your board upside down. Infill 20% 5 perimeters Should hold up to 20kg boards if you use two. If your board is heavier, increase the perimeter count.
Benutzen: Eiskratzer schräg auf die Scheibe setzen, die glatte Seite zeigt zum Glas, und das Eis in Bahnen wegschieben. Bei dickem Eis den Kratzer umdrehen und die Scheibe zuerst mit den neun Zähnen aufrauen. Danach wieder wenden und mit…
Dies ist ein Staender fuer Fruehstuechsbretter. Bitte liegend drucken.
Meet the USBrain – the brainy USB holder that proves memory isn’t just for the human mind. Designed with a realistic brain-inspired look, this clever 3D model transforms your desk into a fusion of science, tech, and creativity. With space…
A replacement divider for the SBR-13 Storage Bin Divider
I recently picked up an asbrot clog cleaner for its smaller size but the tool handle was still to big for my setu so I designed this compact ergonomic handle to to fit in my k2 and bambu printers. The tool itself can be found on Amazon…
Llavero a tamaño real, para imprimir en uno o dos colores (base negra y top del color que se quiera)
Have a CrossBreed Reckoning holster? Don't want to buy a tiny piece of plastic for $9 plus shipping? Same. This cam pushes the grip side of the holster into your body to improve concealment. It fits with no additional hardware, using 2…
Beschreibung Oft reicht schon ein Lächeln um das Eis zu brechen😍. Ich wünsche euch eine schöne Silvesterparty.
The insert consists of six segments, no support needed. Print settings: 0.20mm STRUCTUAL Filament: PETG 15% Grid infill Prusa Core One HF0.4 nozzle Segment time [h] filament [g] Segment_1_v3 07:20 170 Segment_2_v3 07:22 160 Segment_3_v3…
Use supports with 2mm x/y distance from the model so it will be easy to remove them or refer to attached .3mf file. If you would like to support me - you can buy me a coffee :) Please try to share photo of your print <3 Check out my other…
Ein kleiner Halter für einen Gasbrenner und eine Gaskartusche
Give each key a clearer target FocusBridge is an accessibility prototype for people who can press a key but find it difficult to isolate that press from neighbouring keys. This can include people with reduced finger control or involuntary…
Replacement part for the Hasbro Star wars Escape pod 2004 small turbines model.
