Counting matching models…
Snap case for the USBTinyISP, NO screws required! The text on the case is achieved through a multi-material-printer. There is a small indentation that can be used to create the text in the slicer. Please post a make if you liked the model!
The bottom hole for the SBT90.2 is 10x11mm, so make sure you place it correctly. PLA not recommended due to 50°C heat deflection temp, starts softening. I use ASA for 100°C HDT, but PETG should be fine for 70°C HDT. Use white colour…
This is a case for the USBtin ( https://www.fischl.de/usbtin/ ) CAN bus USB adapter. The design is intended to protect the PCB and at de same time adapt to the widely used D-SUB connector. The lid should click in place nicely but is not…
Case to mount a SBT-10(A) tube and some space for drive electronics and a usb c or micro cutout. Should work with ESP D1 Mini glued in with the shield-can towards the case.
This is a case for the great USBtingo CAN-FD Bus interface . The interface PCB can be purchased from this page: https://www.fischl.de/usbtingo/ I like to use it professionally and privately and would like to protect it from mechanical…
Fits nicely, with two hidden screws for mounting
You can just print as many as you want the bigger design holds AA(*9) and AAA(*8) batteries while the smaller one holds AA(*9) I might make a 3rd size but we will see how this does. If this gets popular then i will add onto the system and…
The bottom hole for the SBT90.2 is 10x11mm, so make sure you place it correctly. PLA not recommended due to 50°C heat deflection temp, starts softening. I use ASA for 100°C HDT, but PETG should be fine for 70°C HDT. Use white colour…
Usbtiny ISP box Additional parts: 4x 10mm M3 screws Category: Electronics
This is a case for a common USBTinyISP clone. I wanted something that was as small as sensibly possible and allows for access to the headers as well as the 5V power jumper. The LEDs had to be visible as well. You need 4 M3 screws of about…
Enclosure for the DFRobot USBtinyISP V3.0. Requires 4 M3 inserts, and 4 M3x10 or M3x12 countersunk screws.
An enclosure that designed for Xinda USBtinyISP V3.05. To assemble this, you will need: M3 x 12mm HEX socket screw x4 M3 nuts x4 Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.15 Infill: 15%…
Introduction This is a simple mounting solution to mount USBTO3DO-FZ1 for the Panasonic 3DO FZ-1 (PCB made by tzwmx , originally SataTo3DO by FCare ) into the metal chassis of the original optical disc drive. Zip-tie holes provided just…
A front loaded wall mount for Stiga SBT 48V battery Should also fit similar batteries Alpina Mountfield
Designed for this model: https://s.click.aliexpress.com/e/_c3AENSh9 This enclosure is designed to provide a compact, durable, and clean housing for the board while maintaining full access to all essential ports and connectors. The…
