Search results: scd

Sort order

59 models

P
Printableskikkingoff

Wall mount for Philips Avent SCD923/26

The diameter of the retaining circle is 70.82mm. The fixing holes are 5mm. In the photos I fixed the support temporarily with Patafix / Blu-Tack Print in PLA, 0,15mm, with support

Print approx. €3.25–€3.97 excl. taxPreliminary estimate for one variant

Downloads
75
Likes
6
Rating
0
P
PrintablesMiceciCZE

ESP32 CASE - CO2 Monitor with SCD41 (Home Assistant Ready)

Description: Build your own high-precision indoor air quality monitor! This project uses the industry-standard Sensirion SCD41 sensor paired with an ESP32 to track CO2 levels, temperature, and humidity. It is fully integrated with Home…

Downloads
593
Likes
22
Rating
0
P
Printablesnzt2afrb5e3y

ESP32 ⨯ Sensirion SPS30+SCD41+SGP41 case

how to build All sensors are from Sensirion. They all use I²C bus. The two little ones can withstand 3.3V and 5V, the PM sensor needs 5V. I choose to operate the little ones at 3.3V to minimize their heating. The SCL and SDA wires can be…

Downloads
491
Likes
50
Rating
5
P
Printablesfrigi

Case for SCD40 and ESP32-C3

Update 12.06.2025 : design update for better lid snap and more guideline -compatible sensor slot Small case that you can simply print (case and lid). The case is made to store a: SCD40 or SCD41 board (no pin header, Aliexpress example )…

Downloads
335
Likes
31
Rating
5
P
Printableskev3d

Avent SCD843 camera clamp holder/stand

Avent SCD843 camera clamp holder/stand. The camera clamp has a 30° angle.The fixing holder is 30mm wide. The hight extension has a 150 mm height, by joining them the height can be roughly adjusted. Print Settings Printer: PRUSA MINI+…

Downloads
309
Likes
30
Rating
5
P
PrintablesAndun_HH

Avent Connected SCD923/26 mount

This model is inspired by the babyphone mount by Bosal. A solution to mount the babyphone of a friend at bed. I created the part from scratch to add the following features: The edge of the bed is 20.5mm wide: easy… Screwing the M6 without…

Downloads
293
Likes
20
Rating
5
P
Printables3dprints4life

Baby Monitor / Babyphone Betthalterung Hauck Reisebett-Halterung für Philips Avent SCD845/26

Eine alternative Babyphone Betthalterung für das Babyphone Philips Avent SCD845/26. Sollte die V.1. einen zu steilen Winkel haben kann diese an der ggü. Seite des Babybettes installiert werden. See also my other bed mounts:…

Downloads
184
Likes
13
Rating
5
P
PrintablesTom_Bombadil

ESP32-WROOM-32U + SCD30 case

I wanted to create a case for my ESP32-WROOM-32U which is connected to an SCD30 sensor. It features: sufficient of ventilation holes and spacings a cut-out for a micro USB connector a hole for an IPEX antenna a small extrusion for the ESP…

Downloads
162
Likes
16
Rating
0
P
Printables3dprints4life

Baby Monitor Bed Mount for Philips Avent SCD845/26 (with & without Cable Holder)

A practical bed clamp mount for the Philips Avent SCD845/26 baby monitor – perfect for securely attaching the monitor to the edge of a crib or bed frame. Designed for convenience and better placement of your baby monitor during naps or…

Downloads
157
Likes
11
Rating
4
P
PrintablesScottieD369

SCD-40/41 Sensor Box

SCD 40/41 Sensor Holder Snap-In cover mount Sorry I had to delete old one and re-mod. This one won't break! In project fround HERE >>> https://www.thingiverse.com/thing:6275794 Category: Electronics

Downloads
117
Likes
7
Rating
0
P
PrintablesRalfK

Case for ESP8266 and Sensirion SCD30 CO2 Sensor

The case includes the Sensirion SCD30 CO2 sensor and an AZ-Delivery NodeMCU V3 board. In the attached FreeCAD file, custom adjustments can be made in the spreadsheet. Wiring details can be found in the images. Programming is done using…

Downloads
111
Likes
4
Rating
4
P
PrintablesPrettyPrinter

Sensirion SCD41 case

Simple case for the SCD41 sensor. My specific came from Aliexpress and seems to be a Adafruit clone.

Downloads
103
Likes
7
Rating
0
P
PrintablesRvadrichem

ESP8266 nodeMCU V2 + SCD4x co2 sensor case and screwbase

Found this ESP8266 nodeMCU case and wanted to use it for my co2 level monitoring system at home. I added a build in housing for a SCD40 (same format as SCD41) co2/temperature/humidity sensor and a screwbase for easy wall mounting using…

Downloads
94
Likes
10
Rating
5
P
Printablesriodoro1

Pimoroni SCD41 CO₂ sensor case.

This is a simple case for the SCD41 sensor breakout form Pimoroni. Only the top of the sensor is exposed which minimizes the dead volume and therefore ensures quick sensor response. The shield in front of the sensor protects it from…

Downloads
92
Likes
8
Rating
0
P
PrintablesKSchloe

Neutrik SCDR Abdeckkappe / Cover

Just a quick Neutri SCDR Remodel for "Home-Printing". Used Redline FLEX PLA. Feel free to customize - fusion file attached. ** Uploaded a second longer version with a bigger hole size for the cable.

Downloads
77
Likes
8
Rating
0
P
PrintablesNiklas Roll

Philips Avent SCD923 mount

Simple clip mount for SCD923. Uses M3 thread inserts so clip can be changed to different mounting option

Downloads
76
Likes
7
Rating
0
P
PrintablesKen Mills

Halo UNSCDF Logo Wall Art

Use a color swap for the line work to add contrast. The frame that allows the picture to hang on a wall or stand on a desk / shelf. Just snap the picture in. A thin version at 2mm total thickness is included to reduce material and print…

Downloads
75
Likes
30
Rating
5
P
PrintablesBosal

Babyphone Halterung Philips Avent Video Connected SCD921/26

Babyphone Halterung Philips Avent 2-Teilig mit einstellbarem Winkel. Zusatzmaterial: M6x25 (Innensechskant) / M6-Mutter Die Klemmplatte hat eine Aussparung von 17mm, kann nach belieben angepasst werden.

Downloads
70
Likes
9
Rating
3
P
Printablesedave

Adafruit SCD-40 / SCD-41 Enclosure with Lid

Small enclosure with lid for the Adafruit SCD-40 / SCD-41 board for CO2 / temp / humidity sensing. Includes cutouts for the I2C and a honeycomb pattern for airflow to the sensor, as well as an offset tab for bolting the case to something…

Downloads
55
Likes
3
Rating
0
P
PrintablesSportSoft

Neutrik SCD-W like cover

2 parts Neutrik D type conector cover.

Downloads
54
Likes
10
Rating
0
P
PrintablesKytor

Halo 3 UNSCDF Pin Display Stand

A display stand for the Halo 3 UNSCDF pin.

Downloads
54
Likes
23
Rating
0
P
PrintablesJoerT

Philips AVENT Baby Monitor mount (SCD833)

Simply screw it to the wall and plop the camera on top. There are slits in the mount to optionally secure the power cable to the mount, to avoid the camera being pulled off by the cable. The spacing of the screw holes is identical to the…

Downloads
52
Likes
3
Rating
0
P
Printablesjirihelmich

Case for SCD41 LaskaKit CO2 Sensor

Closable case for SCD41 LaskaKit CO2 Sensor. Ready for uSup connection.

Downloads
51
Likes
4
Rating
0
P
PrintablesEmma

Adafruit SCD-41 / SCD-40 CO2 Sensor Enclosure/Case

This is an enclosure for the Adafruit SCD-41/SCD-40 CO2/temperature/humidity sensor board with a detachable lid and holes for attaching magnets (⌀ 6mm) on the bottom. There are two versions of the case: One with a bottom hole to access…

Downloads
50
Likes
3
Rating
0
P
PrintablesOndřej Kabelka

Box for LaskaKit Meteomini+SCD41+SGP41+STH40

Tisk 2 částí. V modelu jsou připraveny oblasti pro větrací mřížku. Stačí nastavit 0 perimetrů a nechat vyslicovat jen výplň. Použil jsem výplň gyroid. Použity šroubky do plastu 2,2x8 mm.

Downloads
43
Likes
4
Rating
0
P
PrintablesTheGooNie

Philips Avent SCD620 / SCD630 camera holder clamp 30mm & 40mm (remix)

This is a remix of the camera holder clamp only, to fit better in places up to 30mm wide (the original is only about 26mm wide). For the other parts, please use one of the original or remixed sources:…

Downloads
42
Likes
9
Rating
0

SCD-30 Co2 sensor Din Rail mounting bracket

A din rail based mount for Adafruit's SCD-30 CO2 sensor. The sensor can be found at https://www.adafruit.com/product/4867 You will need to print one tab for this design. It can be found at https://www.thingiverse.com/thing:3401942 or…

Downloads
42
Likes
1
Rating
0
P
Printables3dprints4life

Philips Avent Baby Monitor SCD845/26 Mount -> 10 Different Sizes! - Philips Babyphone Halterung -> unterschiedliche Größen

Baby Monitor Mount – Multiple Sizes for Different Panel Thicknesses This is an improved version of my original baby monitor mount, now available in a variety of sizes to fit different panel thicknesses. The design has been refined to be…

Downloads
36
Likes
4
Rating
0

SCD-30 Co2 Sensor mount for 8020 series 10

An 8020 based mount for Adafruit's CO2 sensor. https://www.adafruit.com/product/4867 Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Filament: INLAND PLA Category: Electronics

Downloads
36
Likes
3
Rating
0
P
PrintablesOK1CJH

VINDRIKTNING SCD41 Laskakit

příchytka PCB s CO2 čidlem z Laskakit do krabičky IKEA VINDRIKTNING https://www.laskakit.cz/laskakit-scd41-senzor-co2--teploty-a-vlhkosti-vzduchu/ https://www.laskakit.cz/laskakit-esp-vindriktning-esp-32-i2c/

Downloads
36
Likes
6
Rating
0
P
PrintablesMaelMerlin

SCD4x CO2-Sensor Case

this is a small case for a SCD4x I2C Module to place it apart from the ESP32 heat-source. Just put some foam between the board and the case to hold the sensor in place.

Downloads
32
Likes
2
Rating
0
P
PrintablesLiam Ely

Pi Pico W + SCD-30 Case

Commissioned by Manos Liolios, aka; /u/cgmanuil https://www.artstation.com/manosl Go to him with any ideas you might have, he does great work! A case for use with a pi pico W and adafruit SCD-30, with a 30x30x7mm fan. For more info:…

Downloads
32
Likes
1
Rating
0
P
PrintablesJens83

Belt clip for Philips Avent baby monitor (babyphone) SCD 560

In principle, a baby monitor is a nice thing. Too bad that Philips decided to remove the belt clip for the current version of their DECT babyphones. So if the baby is sleeping and you want to get some stuff done, you still only have one…

Downloads
28
Likes
1
Rating
0
P
PrintablesDean Rogers

SCD40 ESP32C3 OLED

Parts: ESP32C3 OLED from Aliexpress (£2.50 each) https://www.aliexpress.com/item/1005009534750048.html SCD40 (£11 each) https://www.aliexpress.com/item/1005006682069916.html I don't know if my ESP Home code is optimal but it works. So…

Downloads
28
Likes
5
Rating
0
P
Printableselcaptain

Case for ESP32-C6 supermini and SCD40

This case fits an ESP32 C6 and a SCD40 CO2 sensor.

Downloads
26
Likes
3
Rating
0
P
Printablesjeromego

Philips Avent SCD923/26 mount for BabyBjörn Travel Crib Light

When travelling, it was hard to find a place to put this camera, with a view from above the bed. So here is a camera mount to be fixed on the bed. You need a piece of wood, and some M4 screws and nuts. Once assembled, you can mount the…

Downloads
26
Likes
1
Rating
0
P
Printables3dprints4life

Babyphone Betthalterung für Philips Avent SCD845/26 - overengeneered version :)

An alternative baby phone bed mount for the baby phone Philips Avent SCD845/26: The holder can be mounted anywhere on the side of the baby bed. In addition to the two parts, you need four M3 screws with nuts. Suitable for baby beds with…

Downloads
25
Likes
2
Rating
0
P
Printablesjonnybytes

Enclosure for Seeed Studio SCD30 CO2, Humidity & Temperature Sensor

Very simple mount for the Seeed Studio SCD30 CO2, Humidity & Temperature Sensor https://wiki.seeedstudio.com/Grove-CO2_Temperature_Humidity_Sensor-SCD30/ Learning how to use parameters within Fusion so I've included the .step files in…

Downloads
23
Likes
1
Rating
0
P
Printablesvarjujan

Philips Avent SCD923/26 mount for Ender 3 V2

Ender 3 base with the Philip Avent SCD923/26 lock mechanism connected with a printed bolt. Bolt should be printed with 100% infill,

Downloads
23
Likes
2
Rating
0
P
Printablesahoi

Adapter Mounting Plate For Philips AVENT SCD892/26

This adapter can be mounted to the back of the camera with M4 button head screws. Then the camera an be clamped to a pole. There are different models for pole diameters from 10 to 15 mm.

Downloads
23
Likes
2
Rating
0
P
PrintablesAndun_HH

Avent SCD881/26 Holder

This is a remix of the babyphone holder I posted earlier. This remix was requested by Gordo in the comments, so I made it with his specifications: Avent SCD881/26 Baby phone holder The distance of the mushroom pins is 43,25 mm. Increased…

Downloads
20
Likes
1
Rating
5
P
PrintablesHawé

Avent SCD923/26 - camera holder

Avent SCD923/26 - camera holder philips

Downloads
14
Likes
1
Rating
0
P
Printablesprimate

SCD40 extrusion mount

Wanted to upgrade my Voron with a temperature and humidity sensor so came up with this mount for the 2020 extrusion. The model intentionally rises the sensor above the Voron bedpan for more accurate readings. For printing use ABS/ASA and…

Downloads
14
Likes
1
Rating
0
P
PrintablesAdrià

Escdo de printables

Es un ecudo de printables con 4 espadas

Downloads
13
Likes
7
Rating
0
P
PrintablesHawé

Avent SCD923/26 - 45°

Avent SCD923/26 - 45° - philips

Downloads
11
Likes
1
Rating
0
P
Printables3dprints4life

Mount for Philips Avent SCD845 Baby Monitor (20mm) - Halterung für Philips Avent SCD845 Babyphone

This custom 3D printed adapter is designed specifically for the Philips Avent SCD845/26 baby monitor. It securely clips onto 20mm thick boards or shelves, making it ideal for quick and tool-free mounting in baby rooms, bedrooms, or…

Downloads
10
Likes
2
Rating
0
P
PrintablesPetriT

DiscDice

At the tee box, roll DiscDice into an upside-down disc. One die informs which type of disc to throw, the other informs how to throw it. Red die has: Backhand x2 Forehand x2 Roller Utility (your choice of grenades, scoobers, overhands…)…

Downloads
10
Likes
0
Rating
0
P
PrintablesZombie47

Esp8266 box for SCD40

Make air vent grill

Downloads
8
Likes
1
Rating
0
P
PrintablesTerrium

-SCD- Logo

Logo for the player Faction of the -SCD- on the Space Engineers server M.O.D.S. Designed for color change layer printing

Downloads
6
Likes
1
Rating
0
P
PrintablesSergey Gals

Minimalistic case for ESP32-H2 Super mini and CO2/Temperature/Humidity sensor SCD40/41

Minimalistic case for ESP32-H2 Super mini and CO2/Temperature/Humidity sensor SCD40/41 Need M2*6 self-tapping screw Arduino sketch available on github

Downloads
5
Likes
3
Rating
0
P
PrintablesDaafip

Bracket for Philips Avent Babycam - SCD953/26

Replacement cover ring for SCD953/26. Download all the other parts from the original. AI was used to remove text and remix to fit smaller and taller newer model of phillips avent. I used PLA, 0.2mm layer height and 15% infill.

Downloads
5
Likes
1
Rating
0
P

Box for LaskaKit Meteomini+SCD41+SGP41+BME688

Remix for newer Meteo Mini board with dimensions 48,4 x 32,9 x 9 mm Original was for 54,5 x 32,9 x 7 mm

Downloads
4
Likes
2
Rating
0
P
Printablesroboto

Badgeware Adafruit SCD40 Sensor Clip

Adapted to fit Adafruit's SCD40 (and SCD41, probably) StemmaQT I2C breakout. Used M2.5x5mm self-tapping screws to mount. Printed on PETG with 0.22mm layers without support but with a brim. I used a supertack cool plate, ymmv with…

Downloads
3
Likes
1
Rating
0
P
PrintablesFrank Wiebenga

House-Style Enclosure for Apollo Automation ESK-1 (SCD40 & SEN65)

Required Hardware / Components Apollo Automation ESK-1 (ESPHome Starter Kit) Apollo Automation SCD40 CO₂ Sensor Module Sensirion SEN65 All-in-One Environmental Sensor Connecting Ribbons/Wires: Standard ESK-1 ribbon cables and JST…

Downloads
2
Likes
1
Rating
0
P
Printablesmalon

SPS with SCD enclosure (DHT optional)

Smallest enclosure for SPS and SCD sensors. On the side is optional mounting (M3 bolt) for DHT or other sensor which would have better accuracy for temperature and humidity. The SCD can be influenced by heat from the ESP32-C3 Super-mini…

Downloads
0
Likes
0
Rating
0
P
PrintablesHari Hurtig

Sensirion SCD41 development board CO2

Sensirion SCD41 CO2 development board mockup based on datasheet dimensions.

Downloads
0
Likes
0
Rating
0
P
Printables

ESP32 ⨯ Sensirion SPS30+SCD41+SGP41 case

how to build All sensors are from Sensirion. They all use I²C bus. The two little ones can withstand 3.3V and 5V, the PM sensor needs 5V. I choose to operate the little ones at 3.3V to minimize their heating. The SCL and SDA wires can be…

P
Printables

Philips Avent Connected SCD921 921/26 Babyphone Camera Monitor holder / clamp for Baby | fits on Prusa Mini!

First of all, thank you eglobetrotter for your awesome design! I remixed his work to fit the new Philips Avent Connected SCD921/26 camera. I printed everything (in Prusament PETG Urban Grey - PLA is fine) with 3 perimeters on my Prusa i3…