120 models
A quick and easy holder for the blades for oscillating multi-tools. Uses a shock cord to hold the blades in.
Print approx. €1.23–€1.50 excl. taxPreliminary estimate for one variant
I printed with PETG at 0.15mm layer height. I used 100% infill and turned on “bobstro's supports," which are saved in the .3mf file. The tall end of the axle attaches to the large plastic gear with a screw. The other shorter end rests…
Print approx. €0.66–€0.80 excl. taxPreliminary estimate for PETGSource material: PET
This is a two-part print that provides a close-fitting shroud to replace the stock shop-vac size 2.25" dust collection system with an intake for a 4" dust collector. It requires minor assembly (epoxy or thick super glue) and minor…
Got some the of the "on sale" oscillating blades at Home Depot and wanted a good way to store them. Made a couple of different ones for different brands. Got the pin model from…
Wallmount for DeWalt DCS356 Oscillating tool
So you went to put away your new Milwaukee oscillating multi tool blades for your new Milwaukee oscillating multi tool in your new Milwaukee Packout modular storage bin, only to find out that the blades are longer than any of the…
This divides and holds the Milwaukee M18 Fuel Oscillating tool model 2836-20 in a Packout Compact organizer. Designer with print in place springs to hold various size cutters on bottom half and sandpaper with mount in top half. Added…
Standard pegboard (25.4mm) battery post style mounts for additional Ryobi Power Tools beyond what @theamzngq provided here , which is remixed from @AimeBuilder_329593's Universal Peg Board Peg System . Pegs are the version from…
Hanger that I use to hang my multi-tool blades off of Wall Control pegboard using well nuts. There is a small recess for the well nuts such that the holder will be perfectly flush against the panels. The cross shape of the holder allows…
Printed at 0.2mm layer, 3 walls, 40% gyroid infill for strength
very simple but wicked handy little bracket to hold blades and pads and such for many oscillating tools. (major inspiration from “yangorang” who has a nice design already, but only fits some of the blades, this should work with most if…
Overview This is a mini retro-styled desk fan that has a functional oscillation mechanism. The design is a complete rework of my older oscillating fan model. It uses a common 130 size brushed hobby motor and incorporates an 18650 battery…
In April of 1941 Popular Science Magazine had an article on how to build an oscillating steam engine. This model is a reproduction of that engine using the part details in the article. I tried to stay true to the parts in almost all…
Wall mount for a Dewalt DCS356B Oscillating Multi-Tool. Spacer included, just level and use 2 screws. Can be printed with PLA / PETG / ABS. I prefer PETG on this mount. Check out the oscillating blade wall mount holder here:…
12/9/2025 UPDATE Added variant that eliminated the built in storage bin and shifted post by 10 mm to allow for longer blades. Original Created this to easily store your oscillating multi-tool blades. Added a separate section to store the…
Repuesto para el boton que hace oscilar el ventilador de pie con eje de 7mm de diametro. Oscillating fan replacement knob for pedestal fan with a 7 mm diameter shaft.
Das ist ein Remix des Wandhalters https://www.thingiverse.com/thing:4916446 Ich habe die Länge auf 40mm angepasst. Der kleinere Halter hat eine Länge von 20mm. Die Dateien müssen auf 95% reduziert gedruckt werden, damit die Werkzeuge…
This is a stretched and cut up version to fit the Ryobi HP oscillating multitool. The tapered sides to save some filament and make the overhangs a bit less reliant on supports. Printed with Spectrum Sulfur Yellow PCTG (pictured) 0.6mm…
Oscillating Triangle Sandpaper Holder: This is a remix of a design I found on Thingiverse. However, I completely redrew it and added the following: Increased wall thickness/rigidity from 1mm to 3mm Made stackable with posts on lid and…
An abstract sculpture using simple torus shapes melded together and twisted into an oscillating shape. It could act as an artistic design, a trophy or award. This model was NOT created with any use of AI. It is designed to print without…
This wall bin holds oscillating tool blades. you can fit many of them in here without issue for easy access. Print with any filament. Check out the Dewalt Oscillating Multi Tool wall mount here:…
Clip for StarLock Oscillating Multi Tool Blades ☼ Variants for 2 - 6 blades capacity. ☼ For StarLock blades (Bosch / Fein / Festool / Makita / Shark etc.) ☼ Wall-mounting onto a nail or screw Orient the print as shown in the images, and…
This is a multiboard holder for the Dewalt DCS355 oscillating tool. This is a remix of the drill holder for multiboard by @andrepadua, which is a really nice sturdy drill holder I use for my Dewalt drill and impact driver. I wanted to…
Wall mount for multi-tool (or ocillating) tool blades holder. Should be pretty universal.
I bought a bunch of oscillating multi-tool blades and found there were not a lot of options for holding a lot of blades in a compact case, so I designed one. There are three different spacers to help hold the blade end up so they don't…
A tray to hold 80mm triangle sandpaper for oscillating tools. This version is remixed to 100mm in length for smaller collections. Included the divider tags for convivence though they have not been altered from original.
This uses the DDD Printable Wall Control System ( github ) to mount the tool. I've designed this using the Makita XMT03Z , but it may fit other similar oscillating tools. The mounting dimensions are 18.2mm wide and 6mm thick which support…
Oscillating/Multitool Blade/Attachment Holder for Honeycomb Storage Wall. Disclaimer : They fit my Milwaukee blade set and should fit most other blades, but I'm sure there are a couple that might not work with it. Leave a like and a make…
Three variants based on how much you would like to store (3U, 6U, or 9U). Photo shown is a 3U. Model also includes finger cutouts to easily remove units as needed.
This is an adapter for holding sandpaper with an oscillating multitool. I designed it for a DeWalt DCS356, but it may fit other brands/models with the same blade interface. The Everclamp grid with sqwasher plate and thumbscrews lets you…
This is intended to be used with the DDD Wall Control System . TLDR: Your build plate should be: This model 1 x of the 2x0 Flat Left 1 x of the 2x0 Flat Right Multi tool blades are universal, so this will hold any blades you have,…
3.5in Oscillating Tool Pad Storage, prints in about 2hr with .25mm layer heights on most printers (0.4 nozzle). Tilted at a 20deg angle, finger hole for access, and hidden fasteners.
A simple box to store and organize blades for a oscillating multi-tool/fein.
2mm walls with 7% grid infill were adequate to print this. I used 3x 30mm M5 socket head bolts, but the hardware required may vary depending on manufacturer/model: I've seen other models with the same bolt pattern use wood screws. The…
As a beginner in modeling for functional parts, I was super proud of this print. My lovely daughter somehow broke the part that connects the legs of her standing fan. Glue didn’t work, so I thought I’d try my hand at modeling it. It…
Rugged box for safe storage of multitool/oscillating saw blades.
(Imported from my models on Thingiverse: https://www.thingiverse.com/muchtall/designs ) This is made for the Lakso 18″ Remote Control Cyclone Pedestal Fan Model 1843, however it may work with other models. I suspect it works with any 18"…
Update 1/5/2021: Flipped motor and moved gear to front shaft section, attached rigidly against the front bearing. Motor noise has been reduced significantly. Switched out 20mm M3 screws to 15mm. An oscillating desk fan, designed in Fusion…
Why? I wanted to store the guidance for the Bosch GKS 12V 26 and different jig saw, saber saw and oscillating saw Starlock blades in one place. Features: Space efficient solution to store a lot of blades Requirements: Use any stiff…
Neuer Pin des Tischventilators. Der original Pin ging nach kurzer Zeit kaputt. New Oscillation Pin. Aufrecht stehend drucken, ohne Supports.
A remix of the Universal cordless Drill Holder/Mount that is longer that holds a multi tool [Makita XMT03Z].
The thumb nut self-tightens when your using the sander and sometimes it is impossible to get off without using a polygrip. Instead of having to look for one and marring the nut up, i modelled and printed one. It's nothing fancy, but it…
I realized that designing with CAD software and printing small pillars/columns I had problems at high heights. I made this quick test to understand how high I can make a pillar before it loses precision and oscillates. The pillars start…
Two saw blade holders, one for starlock and starlock plus one for starlock max
A simple holder for the DeWalt oscillating multi-tool, for the Honeycomb Storage Wall It is also just a very generic 2 prong holder, I just happen to have made to hold my Multi-tool, I'm sure you can use it for anything that fits.…
This is a osVAC M32 adapter for the Einhell TE-OS 18/1 oscillating sander. It is secured with 3 screws. The inner diameter is 28.8 mm, maybe it fits on similar tools. You'll also need: 3* 3x10 wood/universal screws (optional) o ring R21 I…
Holder to store your Bosch multi tool under a shelf bord. Fits Bosch GOP12V-28
Tapered adapter to connect a 36mm OD hose to the 63mm OD dust port. The ID of this adapter is 36mm and 63mm, so that it will slip over those hose and sander parts. The fit is snug, providing the ability to sand the ID of the adapter to…
Converted hzqtc awesome tray for the spare parts for the Ridgid oscillating belt and spindle sander (https://www.ridgid.com/ca/en/oscillating-edge-belt-spindle-sander) to fit into a 4x5x7 gridfinity bin.
I needed something to organize some 95mm sanding triangles used by a Ryobi multi-tool. This one can also hold the smaller 80mm triangles. Used a 80mm design as inspiration and designed a larger one in FreeCAD.
In case your oscillating sander is missing elastic oscillating bolts, these might suffice. Printed in TPU with 60% infill. I made this following an (potentially original) drawing someone uploaded to a woodworking forum . This is my first…
Simple design, but it works and I didn't see another one on Thingiverse. Designed in Tinkercad in a few minutes Print instructions Category: Organization
Adjusted hole size to better fit a standard wood screw, added a full top and bottom for the holder, adjusted holder size to better fit a larger variety of attachments.
This is just a small modification of the tool hanger made by @Eightbit. All I did was expand it to about 70mm in width. It fits the oscillating tool made by Bauer but likely fits other tools that have a wider handle. No supports required.…
A simple shim to use standard sanding paper with non velcro loop backing paper with oscillating multi-tools. Just apply velcro loops to the back of the pad once and then attach common sanding paper to the flipside with common doublesided…
The adapter that comes with this is designed to attach a vacuum and has an ID of 2.5" - this adapter has an OD of 2.5 so you can easily connect it to 2.5" dust collection hose
Telar ideal para pulsera de cuentas o mostacillas. La base está dividida en dos partes. Necesitas imprimir 4 soportes, 2 varillas roscada, 4 tuercas y 10 encastres.
This is version one of the Defy Lab Oscillator revealed to much fanfare in the year 2017. It is said to combine 18 parts of a watch into one, the main ones being the balance wheel, spring, pallet fork and regulator. It is a compliant…
Printed at 0.2mm layer, 3 walls (like al multiboard parts), 15% infill (PETG). original design is from: https://www.printables.com/@tlisek_2060345
Mount an oscillating amazon fan on 16mm growtent poles. Used fan: https://amzn.eu/d/1JNGo1p
Organize your blades
This is a simple cover for oscillating tool blades. I bought a package of double ended blades where the blade and part that clamps to the tool are bolted together so you can flip the blade end for end when it gets dull (These guys…
Oscillation Overthruster : Buckaroo Banzai
We have a fan which oscillation axis broke. I think that is because of fatigue https://en.wikipedia.org/wiki/Fatigue_(material). The place where it broke does have has a change of section, which is prone to fatigue breaks. Another reason…
I created this Oscillating Blade Holder SCAD Parametric to be used in a tool chest. Magnet cutouts on the bottom allow magnets to be glued in. Because some blades are narrow, or wide, I have options to add blocks to balance out the narrow…
This is the second model of my goal to make 3D Printed french cleat mounts for all of my power tools in the garage. This mount holds the grooves near where the blades attach. Mounting it in this way keeps the weight close to the wall and…
This i a model for adapter for Gardena's Pulse Sprinkler and Extension Pipe for Oscillating Sprinkler . I wanted to raise my oscillating sprinkler. I used Extension Pipe for Oscillating Sprinkler. It fits on the base but pulse sprinkler…
Replacement part for fan oscillation mecanism
Fruit flies! A bit of fruit goes soft and suddenly you have a flurry of the annoying things around. There are many traps you can find here. Invariably they trap the little critters, which might collect inside the trap for quite a while…
Hi! This is the second collection about Conway's Game of Life . 23 Oscillators ready to print. ( See my first collection with 60 files here: Conway's Towers ) The structures generated are called Oscillators as they repeat a pattern after…
NOTE: Requires a #9 O-Ring (often found at hardware stores as a “faucet o-ring”) to function properly. I lost the little cleanout cap / plug that goes on the end of my Melnor oscillating sprinkler. When I contacted their customer support…
Oscillating Pedestal fan gear, 64 teeth and 38mm diameter
Systainer S76 insert for storing multicutter/oscillating tool blades. Stored in clips with up to 5 blades per clip. The blades need to feature the star lock design in order to work. You will also need the lid from my other S76 inserts and…
Use 3 Screws to mount this to the Packout cleat: It is better to print in two pieces than combine the two parts in fusion, it would require supports to print like that. Recommended to print with 5+ edges and ASA for strength, durability,…
Oscillating Spindle Sander Throat Plates Set Replacement throat plates / table inserts for oscillating spindle sanders. Designed to fit a widely rebranded machine platform used across multiple brands and models. These inserts help reduce…
Created this simple bracket to fix the oscillating motion on my Dyson HP01 Air Purifier. You can see in the images above the bracket that broke and accessing it from the bottom of the machine isn't too hard. However, the bracket itself is…
The handle for the scraper and grinding attachment from the oscillating tool is suitable for several types of manufacturers of these attachments. The PLA filament material is completely sufficient, the recommended layer height is 0.3 -…
Hardware: 6x 608 Bearings 8x M3x5x4 Heat set inserts 10x M3X10 Screws 2x set of AA battery spring plates (10x10mm) 2x AA batteries 3v Hobby Motor Switch Wire Thread Assembly (This is the order I recommend): Add the heat set inserts to the…
For a bit more precision I made this ruler. Main purpose is the little workplate, why not 90°, 45° and 30° angle groove. Base plate is from aluminum, so easy attachment by drilling Ø3.3mm hole and M4 thread. Countersunk screws M4x14 (or…
Remixed the cutting head to hold a standard X-Acto No.11 (or equivalent off-brand). Have not tested, may need some tolerances adjusted. Also exported everything to STL or DXF for ease of use. All credit to Luben111 for the mechanical…
I used this motor: https://a.co/d/iooLuS9 and these Bearings: https://a.co/d/89jUofn
This adapter will convert the BAUER Oscillating Edge Belt and Spindle Sander exhaust port to 2 ½" flex hose
This model is the rear grill holder for a desk fan holder. The reason of this build is to create a replacement for a piece which is not sold online by the company, Royal Sovereign International Inc. The cause of damage for the piece was…
Use case If you are not an electronics hobbyist or radio amateur, you will probably have no use for a highly stable and very precise 10MHz reference signal source. For the others, this cheap part is a treasure. Yes, the OCXO module itself…
UPDATE: v2 makes it feel a little bit more secure. Doesn't really matter but a tactile upgrade. Nothing too special regarding print settings.
UPDATE v2: Prints slightly faster and exposes audio jack appropriately. Nothing too special to the print, supports aren't required. Affix to the wall with 3M strips.
[RU] Данная модель — мое видение миниатюрной осцилляторной шлифовальной машинки. Работа заняла 30 часов. Рабочая насадка сменная, так что вы можете при желании сделать другой инструмент под мою рукоять. [EN] This model is my vision of a…
Is it a good idea to mount such a heavy filament sensor to the top of a direct drive extruder? Probably not, but I did it anyways! The very minor benefit here is that slightly less filament is left over when a roll is finished. FWIW, I…
Oscillating multi-tool "hanger" "Holder" Hook" for pegboard, 38mm center-to-center distance, feel free to change if needed. The bottom mounting hole is removed so the "foot" only acts as a support. Feedback is always welcome! If you find…
A laser 3d scan of my M18 Multitool / Oscillating tool
This wall bin holds oscillating tool blades. you can fit many of them in here without issue for easy access. I printed using ABS, but could work with any filament.
I wanted to make something that held the blade in but still made what it was holding visible. So, I outlined the blade in CAD and printed it out with two slots for 10mm x 5mm x 2mm magnets. If you don't have magnets, use a binder clip to…
An artistic sculpture resembling a twisting structure, which could be a shelf sculpture, trophy, or award. This model was NOT created with any use of AI. It is designed to print without supports - assuming good bridging on your printer.…
My Wife needed some visual aids for her geology class, and I created these for her with all the relevant information. 0.16mm Layer Height Supports Not Needed Multicolor 3 Walls with 10% infil
quick tool to vibrate cement and get rid of trapped bubbles. It is 4mm tall, a bit less than 60mm long, print as sturdy as your cement mix requires (more perimeters/layers beat more infill). I printed mine 5 walls and 5 layers top/bottom,…
Custom Skadis mount for the Craftsman Oscillating Tool. Holds the tool upside down.
Oscillating Multitool Blade Holder Sy's pegboard i used painted supports. good luck
"Rolling Ball Oscillator" was inspired by a rolling ball escapement clock my wife and I saw on the television show "The Repair Shop". As mentioned in the show, rolling ball escapement clocks are quite inaccurate due to how level (or…
levier servant a verrouiller une ventouse l'originan est en noir impression sur sovol sv06 plus en PLA a 0.3mm
Mounted horizontally - Oscillating will cause friction and cosmetic damage to the fan and horizontal support. These models allows you to mount an oscillating fan off the floor, saving space. These models should be mounted to a stud. This…
![Triangular Sanding Pad Shim/Plate For Oscillating Multi-Tools [Einhell Varrito, 10cm]](https://media.printables.com/media/prints/1041553/images/7896869_0bb13206-1cfb-49d7-ac71-6c8d4abc015d_a279323c-0135-4724-a204-3b5b100951a8/sandingpad_plate_1.jpg)
